making faster runtime

[Former Member]

hiiiiii all im very new to abap plz suggest me steps so that i can reduce the runtime speed of my program

thanks in advance

hoping 4 quick help

gaurav

[Former Member]

Hi,

Welcome to SDN.

follow the steps mentioned for better performance:

1) Dont use nested seelct statement

2) If possible use for all entries in addition

3) In the where addition make sure you give all the primary key

4) Use Index for the selection criteria.

5) You can also use inner joins

6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.

7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly

https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1...

reward points for useful answers,

regards,

ANJI

[Simha_]

Hi,

1) Remove corresponding from select satement

2) Remove * from select

sort the table first before using for all entries, so that you can use binary search in the read command

3) Select field in sequence as defined in database

4) Avoid unnecessary selects

i.e check for internal table not initial

5) Use all entries and sort table by key fields

6) Remove selects ferom loop and use binary search

7) Try to use secondary index when you don't have

full key.

😎 Modify internal table use transporting option

9) Avoid nested loop . Use read table and loop at itab

from sy-tabix statement.

10) free intrenal table memory wnen table is not

required for further processing.

In SE30 ( ABAP Runtime Analysis),

First give the program name and click execute.

Now come back and click on Analyse.

This will give you the performance of the program.

Anything given in RED barchart means you need to fine tune it.

Code Inspector inspects your code and gives you information regarding the type of issue that you are facing(like performance, syntax error) so that you can correct it later.

Cheers,

Simha

Reward points if helpful

[Former Member]

hi gaurav,

first thig u have to take care of is the time required to fetch data from ur DB this is the part where max time is consumed . u can find the detials in ST05 ( db trace) and in SM30( run time analysis ) it will display where ur prog is taking much time afetr that u can change ur prog accrdingly.

ravi

[Former Member]

Hi..

Go through the following Document

Check the following Links

http://www.sapgenie.com/abap/performance.htm

http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp

check the below link

http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm

See the following link if it's any help:

http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp

Check also http://service.sap.com/performance

and

books like

http://www.sap-press.com/product.cfm?account=&product=H951

http://www.sap-press.com/product.cfm?account=&product=H973

http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm

For all entries

Nested selects

Select using JOINS

Use the selection criteria

Use the aggregated functions

Select with view

Select with index support

Select … Into table

Select with selection list

Key access to multiple lines

Copying internal tables

Modifying a set of lines

Deleting a sequence of lines

Linear search vs. binary

Comparison of internal tables

Modify selected components

Appending two internal tables

Deleting a set of lines

Tools available in SAP to pin-point a performance problem

Optimizing the load of the database

For all entries

The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.

The plus

Large amount of data

Mixing processing and reading of data

Fast internal reprocessing of data

Fast

The Minus

Difficult to program/understand

Memory could be critical (use FREE or PACKAGE size)

Some steps that might make FOR ALL ENTRIES more efficient:

Removing duplicates from the driver table

Sorting the driver table

If possible, convert the data in the driver table to ranges so a BETWEEN statement is used instead of and OR statement:

FOR ALL ENTRIES IN i_tab

WHERE mykey >= i_tab-low and

mykey <= i_tab-high.

Nested selects

The plus:

Small amount of data

Mixing processing and reading of data

Easy to code - and understand

The minus:

Large amount of data

when mixed processing isn’t needed

Performance killer no. 1

Select using JOINS

The plus

Very large amount of data

Similar to Nested selects - when the accesses are planned by the programmer

In some cases the fastest

Not so memory critical

The minus

Very difficult to program/understand

Mixing processing and reading of data not possible

Use the selection criteria

SELECT * FROM SBOOK.

CHECK: SBOOK-CARRID = 'LH' AND

SBOOK-CONNID = '0400'.

ENDSELECT.

SELECT * FROM SBOOK

WHERE CARRID = 'LH' AND

CONNID = '0400'.

ENDSELECT.

Use the aggregated functions

C4A = '000'.

SELECT * FROM T100

WHERE SPRSL = 'D' AND

ARBGB = '00'.

CHECK: T100-MSGNR > C4A.

C4A = T100-MSGNR.

ENDSELECT.

SELECT MAX( MSGNR ) FROM T100 INTO C4A

WHERE SPRSL = 'D' AND

ARBGB = '00'.

Select with view

SELECT * FROM DD01L

WHERE DOMNAME LIKE 'CHAR%'

AND AS4LOCAL = 'A'.

SELECT SINGLE * FROM DD01T

WHERE DOMNAME = DD01L-DOMNAME

AND AS4LOCAL = 'A'

AND AS4VERS = DD01L-AS4VERS

AND DDLANGUAGE = SY-LANGU.

ENDSELECT.

SELECT * FROM DD01V

WHERE DOMNAME LIKE 'CHAR%'

AND DDLANGUAGE = SY-LANGU.

ENDSELECT.

Select with index support

SELECT * FROM T100

WHERE ARBGB = '00'

AND MSGNR = '999'.

ENDSELECT.

SELECT * FROM T002.

SELECT * FROM T100

WHERE SPRSL = T002-SPRAS

AND ARBGB = '00'

AND MSGNR = '999'.

ENDSELECT.

ENDSELECT.

Select … Into table

REFRESH X006.

SELECT * FROM T006 INTO X006.

APPEND X006.

ENDSELECT

SELECT * FROM T006 INTO TABLE X006.

Select with selection list

SELECT * FROM DD01L

WHERE DOMNAME LIKE 'CHAR%'

AND AS4LOCAL = 'A'.

ENDSELECT

SELECT DOMNAME FROM DD01L

INTO DD01L-DOMNAME

WHERE DOMNAME LIKE 'CHAR%'

AND AS4LOCAL = 'A'.

ENDSELECT

Key access to multiple lines

LOOP AT TAB.

CHECK TAB-K = KVAL.

" ...

ENDLOOP.

LOOP AT TAB WHERE K = KVAL.

" ...

ENDLOOP.

Copying internal tables

REFRESH TAB_DEST.

LOOP AT TAB_SRC INTO TAB_DEST.

APPEND TAB_DEST.

ENDLOOP.

TAB_DEST[] = TAB_SRC[].

Modifying a set of lines

LOOP AT TAB.

IF TAB-FLAG IS INITIAL.

TAB-FLAG = 'X'.

ENDIF.

MODIFY TAB.

ENDLOOP.

TAB-FLAG = 'X'.

MODIFY TAB TRANSPORTING FLAG

WHERE FLAG IS INITIAL.

Deleting a sequence of lines

DO 101 TIMES.

DELETE TAB_DEST INDEX 450.

ENDDO.

DELETE TAB_DEST FROM 450 TO 550.

Linear search vs. binary

READ TABLE TAB WITH KEY K = 'X'.

READ TABLE TAB WITH KEY K = 'X' BINARY SEARCH.

Comparison of internal tables

DESCRIBE TABLE: TAB1 LINES L1,

TAB2 LINES L2.

IF L1 <> L2.

TAB_DIFFERENT = 'X'.

ELSE.

TAB_DIFFERENT = SPACE.

LOOP

AT TAB1.

READ TABLE TAB2 INDEX SY-TABIX.

IF TAB1 <> TAB2.

TAB_DIFFERENT = 'X'. EXIT.

ENDIF.

ENDLOOP.

ENDIF.

IF TAB_DIFFERENT = SPACE.

" ...

ENDIF.

IF TAB1[] = TAB2[].

" ...

ENDIF.

Modify selected components

LOOP AT TAB.

TAB-DATE = SY-DATUM.

MODIFY TAB.

ENDLOOP.

WA-DATE = SY-DATUM.

LOOP AT TAB.

MODIFY TAB FROM WA TRANSPORTING DATE.

ENDLOOP.

Appending two internal tables

LOOP AT TAB_SRC.

APPEND TAB_SRC TO TAB_DEST.

ENDLOOP

APPEND LINES OF TAB_SRC TO TAB_DEST.

Deleting a set of lines

LOOP AT TAB_DEST WHERE K = KVAL.

DELETE TAB_DEST.

ENDLOOP

DELETE TAB_DEST WHERE K = KVAL.

Tools available in SAP to pin-point a performance problem

· The runtime analysis (SE30)

· SQL Trace (ST05)

· Tips and Tricks tool

· The performance database

Optimizing the load of the database

Using table buffering

Using buffered tables improves the performance considerably. Note that in some cases a statement can not be used with a buffered table, so when using these statements the buffer will be bypassed. These statements are:

Select DISTINCT

ORDER BY / GROUP BY / HAVING clause

Any WHERE clause that contains a sub query or IS NULL expression

JOIN s

A SELECT... FOR UPDATE

If you wan t to explicitly bypass the buffer, use the BYPASS BUFFER addition to the SELECT clause.

Use the ABAP SORT Clause Instead of ORDER BY

The ORDER BY clause is executed on the database server while the ABAP SORT statement is executed on the application server. The database server will usually be the bottleneck, so sometimes it is better to move the sort from the database server to the application server.

If you are not sorting by the primary key ( E.g. using the ORDER BY PRIMARY key statement) but are sorting by another key, it could be better to use the ABAP SORT statement to sort the data in an internal table. Note however that for very large result sets it might not be a feasible solution and you would want to let the database server sort it.

Avoid the SELECT DISTINCT Statement

As with the ORDER BY clause it could be better to avoid using SELECT DISTINCT, if some of the fields are not part of an index. Instead use ABAP SORT + DELETE ADJACENT DUPLICATES on an internal table, to delete duplicate rows.

Kishore

[Former Member]

hi Gaurav,

<b>Welcome to the forum!</b>

for improving performance you need to follow the basic suggestions listed below:

1. Avoid nested loops.

2. Avoid database statements inside loops.

3. while using READ <internal table> statements, use BINARY SEARCH option.

4. avoid using "into corresponding fields of table".

5. while using "SELECT SINGLE * FROM <table>", mention full key in the where clause.

These points might help you to improve the program performance.

Sajan Joseph.

[Former Member]

hi gaurav,

plz refer to the following lines.

For all entries

Nested selects

Select using JOINS

Use the selection criteria

Use the aggregated functions

Select with view

Select with index support

Select … Into table

Select with selection list

Key access to multiple lines

Copying internal tables

Modifying a set of lines

Deleting a sequence of lines

Linear search vs. binary

Comparison of internal tables

Modify selected components

Appending two internal tables

Deleting a set of lines

Tools available in SAP to pin-point a performance problem

Optimizing the load of the database

Other General Tips & Tricks for Optimization

For all entries:

The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.

The plus

• Large amount of data

• Mixing processing and reading of data

• Fast internal reprocessing of data

• Fast

The Minus

• Difficult to program/understand

• Memory could be critical (use FREE or PACKAGE size)

Some steps that might make FOR ALL ENTRIES more efficient:

• Removing duplicates from the the driver table

• Sorting the driver table

• If possible, convert the data in the driver table to ranges so a BETWEEN statement is used instead of and OR statement:

• FOR ALL ENTRIES IN i_tab

• WHERE mykey >= i_tab-low and

• mykey <= i_tab-high.

Nested selects:

The plus:

• Small amount of data

• Mixing processing and reading of data

• Easy to code - and understand

The minus:

• Large amount of data

• when mixed processing isn’t needed

• Performance killer no. 1

Select using JOINS:

The plus

• Very large amount of data

• Similar to Nested selects - when the accesses are planned by the programmer

• In some cases the fastest

• Not so memory critical

The minus

• Very difficult to program/understand

• Mixing processing and reading of data not possible

Use the selection criteria

SELECT * FROM SBOOK.

CHECK: SBOOK-CARRID = 'LH' AND

SBOOK-CONNID = '0400'.

ENDSELECT.

SELECT * FROM SBOOK

WHERE CARRID = 'LH' AND

CONNID = '0400'.

ENDSELECT.

Use the aggregated functions

C4A = '000'.

SELECT * FROM T100

WHERE SPRSL = 'D' AND

ARBGB = '00'.

CHECK: T100-MSGNR > C4A.

C4A = T100-MSGNR.

ENDSELECT.

SELECT MAX( MSGNR ) FROM T100 INTO C4A

WHERE SPRSL = 'D' AND

ARBGB = '00'.

Select with view

SELECT * FROM DD01L

WHERE DOMNAME LIKE 'CHAR%'

AND AS4LOCAL = 'A'.

SELECT SINGLE * FROM DD01T

WHERE DOMNAME = DD01L-DOMNAME

AND AS4LOCAL = 'A'

AND AS4VERS = DD01L-AS4VERS

AND DDLANGUAGE = SY-LANGU.

ENDSELECT.

SELECT * FROM DD01V

WHERE DOMNAME LIKE 'CHAR%'

AND DDLANGUAGE = SY-LANGU.

ENDSELECT.

Select with index support

SELECT * FROM T100

WHERE ARBGB = '00'

AND MSGNR = '999'.

ENDSELECT.

SELECT * FROM T002.

SELECT * FROM T100

WHERE SPRSL = T002-SPRAS

AND ARBGB = '00'

AND MSGNR = '999'.

ENDSELECT.

ENDSELECT.

Select … Into table:

REFRESH X006.

SELECT * FROM T006 INTO X006.

APPEND X006.

ENDSELECT

SELECT * FROM T006 INTO TABLE X006.

Select with selection list:

SELECT * FROM DD01L

WHERE DOMNAME LIKE 'CHAR%'

AND AS4LOCAL = 'A'.

ENDSELECT

SELECT DOMNAME FROM DD01L

INTO DD01L-DOMNAME

WHERE DOMNAME LIKE 'CHAR%'

AND AS4LOCAL = 'A'.

ENDSELECT

Key access to multiple lines:

LOOP AT TAB.

CHECK TAB-K = KVAL.

" ...

ENDLOOP.

LOOP AT TAB WHERE K = KVAL.

" ...

ENDLOOP.

Copying internal tables:

REFRESH TAB_DEST.

LOOP AT TAB_SRC INTO TAB_DEST.

APPEND TAB_DEST.

ENDLOOP.

TAB_DEST[] = TAB_SRC[].

Modifying a set of lines:

LOOP AT TAB.

IF TAB-FLAG IS INITIAL.

TAB-FLAG = 'X'.

ENDIF.

MODIFY TAB.

ENDLOOP.

TAB-FLAG = 'X'.

MODIFY TAB TRANSPORTING FLAG

WHERE FLAG IS INITIAL.

Deleting a sequence of lines:

DO 101 TIMES.

DELETE TAB_DEST INDEX 450.

ENDDO.

DELETE TAB_DEST FROM 450 TO 550.

Linear search vs. binary:

READ TABLE TAB WITH KEY K = 'X'.

READ TABLE TAB WITH KEY K = 'X' BINARY SEARCH.

Comparison of internal tables

DESCRIBE TABLE: TAB1 LINES L1,

TAB2 LINES L2.

IF L1 <> L2.

TAB_DIFFERENT = 'X'.

ELSE.

TAB_DIFFERENT = SPACE.

LOOP AT TAB1.

READ TABLE TAB2 INDEX SY-TABIX.

IF TAB1 <> TAB2.

TAB_DIFFERENT = 'X'. EXIT.

ENDIF.

ENDLOOP.

ENDIF.

IF TAB_DIFFERENT = SPACE.

" ...

ENDIF.

IF TAB1[] = TAB2[].

" ...

ENDIF.

Modify selected components:

LOOP AT TAB.

TAB-DATE = SY-DATUM.

MODIFY TAB.

ENDLOOP.

WA-DATE = SY-DATUM.

LOOP AT TAB.

MODIFY TAB FROM WA TRANSPORTING DATE.

ENDLOOP.

Appending two internal tables:

LOOP AT TAB_SRC.

APPEND TAB_SRC TO TAB_DEST.

ENDLOOP

APPEND LINES OF TAB_SRC TO TAB_DEST.

Deleting a set of lines:

LOOP AT TAB_DEST WHERE K = KVAL.

DELETE TAB_DEST.

ENDLOOP

DELETE TAB_DEST WHERE K = KVAL.

Tools available in SAP to pin-point a performance problem

• The runtime analysis (SE30)

• SQL Trace (ST05)

• Tips and Tricks tool

• The performance database

Optimizing the load of the database

Using table buffering:

Using buffered tables improves the performance considerably. Note that in some cases a stament can not be used with a buffered table, so when using these staments the buffer will be bypassed. These staments are:

• Select DISTINCT

• ORDER BY / GROUP BY / HAVING clause

• Any WHERE clasuse that contains a subquery or IS NULL expression

• JOIN s

• A SELECT... FOR UPDATE

If you wnat to explicitly bypass the bufer, use the BYPASS BUFFER addition to the SELECR clause.

Use the ABAP SORT Clause Instead of ORDER BY:

The ORDER BY clause is executed on the database server while the ABAP SORT statement is executed on the application server. The datbase server will usually be the bottleneck, so sometimes it is better to move thje sort from the datsbase server to the application server.

If you are not sorting by the primary key ( E.g. using the ORDER BY PRIMARY key statement) but are sorting by another key, it could be better to use the ABAP SORT stament to sort the data in an internal table. Note however that for very large result sets it might not be a feasible solution and you would want to let the datbase server sort it.

Avoid ther SELECT DISTINCT Statement:

As with the ORDER BY clause it could be better to avoid using SELECT DISTINCT, if some of the fields are not part of an index. Instead use ABAP SORT + DELETE ADJACENT DUPLICATES on an internal table, to delete duplciate rows.

TIPS & TRICKS FOR OPTIMIZATION

• Use the GET RUN TIME command to help evaluate performance. It's hard to know whether that optimization technique REALLY helps unless you test it out. Using this tool can help you know what is effective, under what kinds of conditions. The GET RUN TIME has problems under multiple CPUs, so you should use it to test small pieces of your program, rather than the whole program.

• Generally, try to reduce I/O first, then memory, then CPU activity. I/O operations that read/write to hard disk are always the most expensive operations. Memory, if not controlled, may have to be written to swap space on the hard disk, which therefore increases your I/O read/writes to disk. CPU activity can be reduced by careful program design, and by using commands such as SUM (SQL) and COLLECT (ABAP/4).

• Avoid 'SELECT *', especially in tables that have a lot of fields. Use SELECT A B C INTO instead, so that fields are only read if they are used. This can make a very big difference.

• Field-groups can be useful for multi-level sorting and displaying. However, they write their data to the system's paging space, rather than to memory (internal tables use memory). For this reason, field-groups are only appropriate for processing large lists (e.g. over 50,000 records). If you have large lists, you should work with the systems administrator to decide the maximum amount of RAM your program should use, and from that, calculate how much space your lists will use. Then you can decide whether to write the data to memory or swap space.

• Use as many table keys as possible in the WHERE part of your select statements.

• Whenever possible, design the program to access a relatively constant number of records (for instance, if you only access the transactions for one month, then there probably will be a reasonable range, like 1200-1800, for the number of transactions inputted within that month). Then use a SELECT A B C INTO TABLE ITAB statement.

• Get a good idea of how many records you will be accessing. Log into your productive system, and use SE80 -> Dictionary Objects (press Edit), enter the table name you want to see, and press Display. Go To Utilities -> Table Contents to query the table contents and see the number of records. This is extremely useful in optimizing a program's memory allocation.

• Try to make the user interface such that the program gradually unfolds more information to the user, rather than giving a huge list of information all at once to the user.

• Declare your internal tables using OCCURS NUM_RECS, where NUM_RECS is the number of records you expect to be accessing. If the number of records exceeds NUM_RECS, the data will be kept in swap space (not memory).

• Use SELECT A B C INTO TABLE ITAB whenever possible. This will read all of the records into the itab in one operation, rather than repeated operations that result from a SELECT A B C INTO ITAB... ENDSELECT statement. Make sure that ITAB is declared with OCCURS NUM_RECS, where NUM_RECS is the number of records you expect to access.

• If the number of records you are reading is constantly growing, you may be able to break it into chunks of relatively constant size. For instance, if you have to read all records from 1991 to present, you can break it into quarters, and read all records one quarter at a time. This will reduce I/O operations. Test extensively with GET RUN TIME when using this method.

• Know how to use the 'collect' command. It can be very efficient.

• Use the SELECT SINGLE command whenever possible.

• Many tables contain totals fields (such as monthly expense totals). Use these avoid wasting resources by calculating a total that has already been calculated and stored.

ABAP/4 Development Code Efficiency Guidelines

ABAP/4 (Advanced Business Application Programming 4GL) language is an "event-driven", "top-down", well-structured and powerful programming language. The ABAP/4 processor controls the execution of an event. Because the ABAP/4 language incorporates many "event" keywords and these keywords need not be in any specific order in the code, it is wise to implement in-house ABAP/4 coding standards.

SAP-recommended customer-specific ABAP/4 development guidelines can be found in the SAP-documentation.

This page contains some general guidelines for efficient ABAP/4 Program Development that should be considered to improve the systems performance on the following areas:-

Physical I/O - data must be read from and written into I/O devices. This can be a potential bottle neck. A well configured system always runs 'I/O-bound' - the performance of the I/O dictates the overall performance.

Memory consumption of the database resources eg. buffers, etc.

CPU consumption on the database and application servers

Network communication - not critical for little data volumes, becomes a bottle neck when large volumes are transferred.

Policies and procedures can also be put into place so that every SAP-customer development object is thoroughly reviewed (quality – program correctness as well as code-efficiency) prior to promoting the object to the SAP-production system. Information on the SAP R/3 ABAP/4 Development Workbench programming tools and its features can be found on the SAP Public Web-Server.

-

---

CLASSIC GOOD 4GL PROGRAMMING CODE-PRACTICES GUIDELINES

Avoid dead-code :

Remove unnecessary code and redundant processing

Spend time documenting and adopt good change control practices

Spend adequate time anayzing business requirements, process flows, data-structures and data-model

Quality assurance is key: plan and execute a good test plan and testing methodology

Experience counts

-

---

SELECT * FROM <TABLE>

CHECK: <CONDITION>

ENDSELECT

vs.

SELECT * FROM <TABLE>

WHERE <CONDITION>

ENDSELECT

In order to keep the amount of data which is relevant to the query the hit set small, avoid using SELECT+CHECK statements wherever possible. As a general rule of thumb, always specify all known conditions in the WHERE clause (if possible). If there is no WHERE clause the DBMS has no chance to make optimizations. Always specify your conditions in the Where-clause instead of checking them yourself with check-statements. The database system can also potentially make use a database index (if possible) for greater efficiency resulting in less load on the database server and considerably less load on the network traffic as well.

Also, it is important to use EQ (=) in the WHERE clause wherever possible, and analyze the SQL-statement for the optimum path the database optimizer will utilize via SQL-trace when necessary.

Also, ensure careful usage of "OR", "NOT" and value range tables (INTTAB) that are used inappropriately in Open SQL statements.

-

---

SELECT *

vs.

SELECT SINGLE *

If you are interested in exactly one row of a database table or view, use the SELECT SINGLE statement instead of a SELECT * statement. SELECT SINGLE requires one communication with the database system whereas SELECT * requires two.

-

---

SELECT * FROM <TABLE> INTO <INT-TAB>

APPEND <INT-TAB>

ENDSELECT

vs.

SELECT * FROM <TABLE> INTO TABLE <INT-TAB>

It is usually faster to use the INTO TABLE version of a SELECT statement than to use APPEND statements

-

---

SELECT ... WHERE + CHECK

vs.

SELECT using aggregate function

If you want to find the maximum, minimum, sum and average value or the count of a database column, use a select list with aggregate functions instead of computing the aggregates within the program. The RDBMS is responsible for aggregated computations instead of transferring large amount of data to the application. Overall Network, Application-server and Database load is also considerably less.

-

---

SELECT INTO TABLE <INT-TAB> + LOOP AT T

…………

SELECT * FROM <TABLE> INTO TABLE <INT-TAB>.

LOOP AT <INT-TAB>.

ENDLOOP.

vs.

SELECT * FROM <TABLE>

……….

ENDSELECT

If you process your data only once, use a SELECT-ENDSELECT loop instead of collecting data in an internal table with SELECT ... INTO TABLE. Internal table handling takes up much more space

-

---

Nested SELECT statements:

SELECT * FROM <TABLE-A>

SELECT * FROM <TABLE-B>

……..

ENDSELECT.

ENDSELECT

vs.

Select with view

SELECT * FROM <VIEW>

ENDSELECT

To process a join, use a view wherever possible instead of nested SELECT statements.

Using nested selects is a technique with low performance. The inner select statement is executed several times which might be an overhead. In addition, fewer data must be transferred if another technique would be used eg. join implemented as a view in ABAP/4 Repository.

• SELECT ... FORM ALL ENTRIES

• Explicit cursor handling (for more information, goto Transaction SE30 – Tips & Tricks)

-

---

Nested select:

SELECT * FROM pers WHERE condition.

SELECT * FROM persproj WHERE person = pers-persnr.

... process ...

ENDSELECT.

ENDSELECT.

vs.

SELECT persnr FROM pers INTO TABLE ipers WHERE cond. ……….

SELECT * FROM persproj FOR ALL ENTRIES IN ipers

WHERE person = ipers-persnr

………... process .……………

ENDSELECT.

In the lower version the new Open SQL statement FOR ALL ENTRIES is used. Prior to the call, all interesting records from 'pers' are read into an internal table. The second SELECT statement results in a call looking like this (ipers containing: P01, P02, P03):

(SELECT * FROM persproj WHERE person = 'P01')

UNION

(SELECT * FROM persproj WHERE person = 'P02')

UNION

(SELECT * FROM persproj WHERE person = 'P03')

In case of large statements, the R/3's database interface divides the statement into several parts and recombines the resulting set to one. The advantage here is that the number of transfers is minimized and there is minimal restrictions due to the statement size (compare with range tables).

-

---

SELECT * FROM <TABLE>

vs.

SELECT <column(s)> FROM <TABLE>

Use a select list or a view instead of SELECT *, if you are only interested in specific columns of the table. If only certain fields are needed then only those fields should be read from the database. Similarly, the number of columns can also be restricted by using a view defined in ABAP/4 Dictionary. Overall database and network load is considerably less.

-

---

SELECT without table buffering support

vs.

SELECT with table buffering support

For all frequently used, read-only(few updates) tables, do attempt to use SAP-buffering for eimproved performance response times. This would reduce the overall Database activity and Network traffic.

-

---

Single-line inserts

LOOP AT <INT-TAB>

INSERT INTO <TABLE> VALUES <INT-TAB>

ENDLOOP

vs.

Array inserts

Whenever possible, use array operations instead of single-row operations to modify the database tables.

Frequent communication between the application program and database system produces considerable overhead.

-

---

Single-line updates

SELECT * FROM <TABLE>

<COLUMN-UPDATE STATEMENT>

UPDATE <TABLE>

ENDSELECT

vs.

Column updates

UPDATE <TABLE> SET <COLUMN-UPDATE STATEMENT>

Wherever possible, use column updates instead of single row updates to update your database tables

-

---

DO....ENDDO loop with Field-Symbol

vs.

Using CA operator

Use the special operators CO, CA, CS instead of programming the operations yourself

If ABAP/4 statements are executed per character on long strings, CPU consumprion can rise substantially

-

---

Use of a CONCATENATE function module

vs.

Use of a CONCATENATE statement

Some function modules for string manipulation have become obsolete, and should be replaced by ABAP statements or functions

STRING_CONCATENATE... ---> CONCATENATE

STRING_SPLIT... ---> SPLIT

STRING_LENGTH... ---> strlen()

STRING_CENTER... ---> WRITE..TO. ..CENTERED

STRING_MOVE_RIGHT ---> WRITE...TO...RIGHT-JUSTIFIED

-

---

Moving with offset

vs.

Use of the CONCATENATE statement

Use the CONCATENATE statement instead of programming a string concatenation of your own

-

---

Use of SEARCH and MOVE with offset

vs.

Use of SPLIT statement

Use the SPLIT statement instead of programming a string split yourself

-

---

Shifting by SY-FDPOS places

vs

Using SHIFT...LEFT DELETING LEADING...

If you want ot delete the leading spaces in a string use the ABAP/4 statements SHIFT...LEFT DELETING LEADING... Other constructions (with CN and SHIFT... BY SY-FDPOS PLACES, with CONDENSE if possible, with CN and ASSIGN CLA+SY-FDPOS(LEN) ...) are not as fast

-

---

Get a check-sum with field length

vs

Get a check-sum with strlen ()

Use the strlen () function to restrict the DO loop to the relevant part of the field, eg. when determinating a check-sum