idoc

[Former Member]

what is idoc?

how to use idoc?

when to use idoc?

Message was edited by:

Tanaya Amdekar

[Former Member]

Hi

IDOC means Intermediate Document which is used for application data carrier

See the doc

IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an

asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.

While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.

IDoc is a intermediate document to exchange data between two SAP Systems.

*IDocs are structured ASCII files (or a virtual equivalent).

*Electronic Interchange Document

*They are the file format used by SAP R/3 to exchange data with foreign systems.

*Data Is transmitted in ASCII format, i.e. human readable form

*IDocs exchange messages

*IDocs are used like classical interface files

IDOC types are templates for specific message types depending on what is the business document, you want to exchange.

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

FOr testing you can use WE19.

How to create idoc?

*WE30 - you can create a IDOC type

For more information in details on the same along with the examples can be viewed on:

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm

http://www.sappoint.com/presentation.html

http://www.allsaplinks.com/idoc_search.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://www.erpgenie.com/sapedi/idoc_abap.htm

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30 )

Create Message Type ( WE81 )

Assign Idoc Type to Message Type ( WE82 )

Creating a Segment

Go to transaction code WE31

Enter the name for your segment type and click on the Create icon

Type the short text

Enter the variable names and data elements

Save it and go back

Go to Edit -> Set Release

Follow steps to create more number of segments

Create IDOC Type

Go to transaction code WE30

Enter the Object Name, select Basic type and click Create icon

Select the create new option and enter a description for your basic IDOC type and press enter

Select the IDOC Name and click Create icon

The system prompts us to enter a segment type and its attributes

Choose the appropriate values and press Enter

The system transfers the name of the segment type to the IDOC editor.

Follow these steps to add more number of segments to Parent or as Parent-child relation

Save it and go back

Go to Edit -> Set release

Create Message Type

Go to transaction code WE81

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter

Click New Entries to create new Message Type

Fill details

Save it and go back

Assign Message Type to IDoc Type

Go to transaction code WE82

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.

Click New Entries to create new Message Type.

Fill details

Save it and go back

Check these out..

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

ALE/ IDOC

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

go trough these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...

1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.

2.IDOCs are independent of the sending and receiving systems.

3.IDOCs are independent of the direction of data exchange.

The two available process for IDOCs are

Outbound Process

Inbound Process

AND There are basically two types of IDOCs.

Basic IDOCs

Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.

Extended IDOCs

Extending the functionality by adding more segments to existing Basic IDOCs.

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30)

Create Message Type ( WE81)

Assign Idoc Type to Message Type ( WE82)

imp links

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

www.sappoint.com

--here u can find the ppts and basic seetings for ALE

http://sappoint.com/presentation.html

www.sapgenie.com

http://www.sapgenie.com/ale/index.htm

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

Try this..Hope this will help.

>>>> SAP ALE & IDOC<<<<

Steps to configuration(Basis) >>

1. Create Logical System (LS) for each applicable ALE-enabled client

2. Link client to Logical System on the respective servers

3. Create background user, to be used by ALE(with authorizaton for ALE postings)

4. Create RFC Destinations(SM59)

5. Ports in Idoc processing(WE21)

6. Generate partner profiles for sending system

The functional configuration(Tcode: SALE)

• Create a Customer Distribution Model (CDM);

• Add appropriate message types and filters to the CDM;

• Generate outbound partner profiles;

• Distribute the CDM to the receiving systems; and

• Generate inbound partner profiles on each of the clients.

Steps to customize a new IDoc >>>

1. Define IDoc Segment (WE31)

2. Convert Segments into an IDoc type (WE30)

3. Create a Message Type (WE81)

4. Create valid Combination of Message & IDoc type(WE82)

5. Define Processing Code(WE41 for OUT / WE42 for IN)

6. Define Partner Profile(WE20)

Important Transaction Codes:

SALE - IMG ALE Configuration root

WE20 - Manually maintain partner profiles

BD64 - Maintain customer distribution model

BD71 - Distribute customer distribution model

SM59 - Create RFC Destinations

BDM5 - Consistency check (Transaction scenarios)

BD82 - Generate Partner Profiles

BD61 - Activate Change Pointers - Globally

BD50 - Activate Change Pointer for Msg Type

BD52 - Activate change pointer per change.doc object

BD59 - Allocation object type -> IDOC type

BD56 - Maintain IDOC Segment Filters

BD53 - Reduction of Message Types

BD21 - Select Change Pointer

BD87 - Status Monitor for ALE Messages

BDM5 - Consistency check (Transaction scenarios)

BD62 - Define rules

BD79 - Maintain rules

BD55 - Defining settings for IDoc conversion

WEDI - ALE IDoc Administration

WE21 - Ports in Idoc processing

WE60 - IDoc documentation

SARA - IDoc archiving (Object type IDOC)

WE47 - IDoc status maintenance

WE07 - IDoc statistics

BALE - ALE Distribution Administration

WE05 - IDoc overview

BD87 - Inbound IDoc reprocessing

BD88 - Outbound IDoc reprocessing

BDM2 - IDoc Trace

BDM7 - IDoc Audit Analysis

BD21 - Create IDocs from change pointers

SM58 - Schedule RFC Failures

Basic config for Distributed data:

BD64: Maintain a Distributed Model

BD82: Generate Partner Profile

BD64: Distribute the distribution Model

Programs

RBDMIDOC – Creating IDoc Type from Change Pointers

RSEOUT00 – Process all selected IDocs (EDI)

RBDAPP01 - Inbound Processing of IDocs Ready for Transfer

RSARFCEX - Execute Calls Not Yet Executed

RBDMOIND - Status Conversion with Successful tRFC Execution

RBDMANIN - Start error handling for non-posted IDocs

RBDSTATE - Send Audit Confirmations

FOr testing you can use WE19.

Check these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

Please check this PDF documents for ALE and IDoc.

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

<b>Reward points for useful Answers</b>

Regards

Anji

[Former Member]

Hi,

<b>what is idoc??</b>

IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system.

<b>How to use Idoc?</b>

Receiving System(Inbound ALE )

Create Idoc type – Transaction WE30.

Idoc type Idoc segments

Z_idoc

Create Message Type – Transaction WE81.

Message type

z_msg

Assign Message Type to Idoc type – Transaction WE82.

Idoc type Message type

z_idoc z_msg

Create a function module through SE37

z_idoc_input

Assign characteristic of function module BD51

Assign fn module to Idoc type and Message Type WE57

Idoc type Message type Fn Module

z_idoc z_msg z_idoc_input

Create Inbound process code and assign inbound function module – Transaction WE42.

Process code Inbound function module

zcode z_idoc_input

Create a distribution Model - Transaction BD64

Create distribution model for distribution of messages

with the message type of z_msg

Update inbound parameters of the Partner profile – Transaction WE20

For the Logical system A for the above message type update the partner profile

inbound parameter and specify the process code of zcode.

For Outbound ALE Configurations: (Example)

IDoc definitions and necessary ALE configurations settings for the outbound .

Create Idoc segments – Transaction WE31.

Create Idoc type – Transaction WE30.

Create Message Type – Transaction WE81.

Assign Message Type to Idoc type – Transaction WE82.

Create a distribution Model - Transaction BD64

<b>When to us idoc?</b>

IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database.

<b>plz reward points if helpful </b>

[Former Member]

Hi,

check it out

There are basically two types of IDOCs.

Basic IDOCs

Extended IDOCs

Idoc Components

Basic Idoc

Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.

Extension Idoc

Extending the functionality by adding more segments to existing Basic IDOCs.

Creation of IDoc

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30)

Create Message Type ( WE81)

Assign Idoc Type to Message Type ( WE82)

Creating a Segment

Go to transaction code WE31

Enter the name for your segment type and click on the Create icon

Type the short text

Enter the variable names and data elements

Save it and go back

Go to Edit -> Set Release

Follow steps to create more number of segments

Create IDOC Type

Go to transaction code WE30

Enter the Object Name, select Basic type and click Create icon

Select the create new option and enter a description for your basic IDOC type and press enter

Select the IDOC Name and click Create icon

The system prompts us to enter a segment type and its attributes

Choose the appropriate values and press Enter

The system transfers the name of the segment type to the IDOC editor.

Create IDOC Type

Follow these steps to add more number of segments to Parent or as Parent-child relation

Save it and go back

Go to Edit -> Set release

Create Message Type

Go to transaction code WE81

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter

Click New Entries to create new Message Type

Fill details

Save it and go back

Assign Message Type to IDoc Type

Go to transaction code WE82

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.

Click New Entries to create new Message Type.

Fill details

Save it and go back

u can also check all these links related to idocs

http://www.allsaplinks.com/idoc_sample.html

http://www.allsaplinks.com/

http://www.sap-img.com/

http://www.sappoint.com/abap.html

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://expertanswercenter.techtarget.com/eac/knowledgebaseCategory/0,295197,sid63_tax296858_idx0_off...

http://sap.ittoolbox.com/documents/popular-q-and-a/extending-a-basic-idoc-type-2358

http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7eee43d711d1893e0000e8323c4f/frameset.htm

Regards