dynpro does not exist

[Former Member]

Hello Guys,

iam enhancing the screen i did all the coding and also created subscreen now iam getting error saying that dynpro does not exists.

The system attempted to use dynpro 0100 in program "SAPLZFCA".

This dynpro does not exist.

can any body please give me suggestions.

all your help will be appreciated.

Regards

Jana

[Former Member]

Hi Jana

What is the no and name of the subscreen that you have created, this error message can pop due to various reasons, just check if you have activated all the components of your dialogue program, flow logic, layout etc. Then check if you are referncing the subscreen correctly in the flow logic and layout. If there are no obvious problems then send me your code I will try and analyse it for you.

Cheers.

[Former Member]

Check the below link and some one had same type issue

Thanks

Seshu

[Former Member]

Hello sameer/seshu,

can u explain more about how i need to check the whether screen is referenced in flow logic.its really urgent .can you give me ur email id please.

Regards

jana

[Former Member]

step 1.

goto se80

program

program name

enter:

list will be display.

DEMO_DYNPRO_TABSTRIP_LOCAL Tabstrip Control - Scrolling at SAPgui

field

pbo module

pai

screen.

click screen >>>>>>>>>>>>>.u r create sub screen display or not check.

next step.

active full program.

place the cursor on program name . right click ->list dispaly->active .

next step.

in program u call sub screen correctly check

[Former Member]

Hi, I got the same error.I copied this from some webpage and try to run code but I couldnt found what went wrong.Here is my code.Can someone help me.Which one doesnt activated. I dont get it.Please help me.Tq

*I am beginner in sap.

TABLES: ekko.

TYPE-POOLS: slis. "ALV Declarations

TYPES: BEGIN OF t_ekko,

ebeln TYPE ekpo-ebeln,

ebelp TYPE ekpo-ebelp,

statu TYPE ekpo-statu,

aedat TYPE ekpo-aedat,

matnr TYPE ekpo-matnr,

menge TYPE ekpo-menge,

meins TYPE ekpo-meins,

netpr TYPE ekpo-netpr,

peinh TYPE ekpo-peinh,

END OF t_ekko.

DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,

      it_ekpo TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,

      it_emptytab TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,

      wa_ekko TYPE t_ekko,

      wa_ekpo TYPE t_ekko.

DATA: ok_code like sy-ucomm, "OK-Code

      save_ok like sy-ucomm.

*ALV data declarations

DATA: fieldcatalog TYPE lvc_t_fcat WITH HEADER LINE.

DATA: gd_fieldcat TYPE lvc_t_fcat,

gd_tab_group TYPE slis_t_sp_group_alv,

gd_layout TYPE slis_layout_alv.

*ALVtree data declarations

CLASS cl_gui_column_tree DEFINITION LOAD.

CLASS cl_gui_cfw DEFINITION LOAD.

DATA: gd_tree TYPE REF TO cl_gui_alv_tree,

gd_hierarchy_header TYPE treev_hhdr,

gd_report_title TYPE slis_t_listheader,

gd_logo TYPE sdydo_value,

gd_variant TYPE disvariant.

*Create container for alv-tree

DATA: l_tree_container_name(30) TYPE c,

l_custom_container TYPE REF TO cl_gui_custom_container.

************************************************************************

*Includes

*INCLUDE ZDEMO_ALVTREEO01. "Screen PBO Modules

*INCLUDE ZDEMO_ALVTREEI01. "Screen PAI Modules

*INCLUDE ZDEMO_ALVTREEF01. "ABAP Subroutines(FORMS)

************************************************************************

*Start-of-selection.

START-OF-SELECTION.

* ALVtree setup data

PERFORM data_retrieval.

PERFORM build_fieldcatalog.

PERFORM build_layout.

PERFORM build_hierarchy_header CHANGING gd_hierarchy_header.

PERFORM build_report_title USING gd_report_title gd_logo.

PERFORM build_variant.

* Display ALVtree report

call screen 100.

*&---------------------------------------------------------------------*

*& Form DATA_RETRIEVAL

*&---------------------------------------------------------------------*

* Retrieve data into Internal tables

*----------------------------------------------------------------------*

FORM data_retrieval.

SELECT ebeln

UP TO 10 ROWS

FROM ekko

INTO corresponding fields of TABLE it_ekko.

loop at it_ekko into wa_ekko.

SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh

FROM ekpo

appending TABLE it_ekpo

where ebeln eq wa_ekko-ebeln.

endloop.

ENDFORM. " DATA_RETRIEVAL

*&---------------------------------------------------------------------*

*& Form BUILD_FIELDCATALOG

*&---------------------------------------------------------------------*

* Build Fieldcatalog for ALV Report

*----------------------------------------------------------------------*

FORM build_fieldcatalog.

* Please not there are a number of differences between the structure of

* ALVtree fieldcatalogs and ALVgrid fieldcatalogs.

* For example the field seltext_m is replace by scrtext_m in ALVtree.

fieldcatalog-fieldname = 'EBELN'. "Field name in itab

fieldcatalog-scrtext_m = 'Purchase Order'. "Column text

fieldcatalog-col_pos = 0. "Column position

fieldcatalog-outputlen = 15. "Column width

fieldcatalog-emphasize = 'X'. "Emphasize (X or SPACE)

fieldcatalog-key = 'X'. "Key Field? (X or SPACE)

* fieldcatalog-do_sum = 'X'. "Sum Column?

* fieldcatalog-no_zero = 'X'. "Don't display if zero

APPEND fieldcatalog TO gd_fieldcat.

CLEAR fieldcatalog.

fieldcatalog-fieldname = 'EBELP'.

fieldcatalog-scrtext_m = 'PO Iten'.

fieldcatalog-outputlen = 15.

fieldcatalog-col_pos = 1.

APPEND fieldcatalog TO gd_fieldcat..

CLEAR fieldcatalog.

fieldcatalog-fieldname = 'STATU'.

fieldcatalog-scrtext_m = 'Status'.

fieldcatalog-outputlen = 15.

fieldcatalog-col_pos = 2.

APPEND fieldcatalog TO gd_fieldcat..

CLEAR fieldcatalog.

fieldcatalog-fieldname = 'AEDAT'.

fieldcatalog-scrtext_m = 'Item change date'.

fieldcatalog-outputlen = 15.

fieldcatalog-col_pos = 3.

APPEND fieldcatalog TO gd_fieldcat..

CLEAR fieldcatalog.

fieldcatalog-fieldname = 'MATNR'.

fieldcatalog-scrtext_m = 'Material Number'.

fieldcatalog-outputlen = 15.

fieldcatalog-col_pos = 4.

APPEND fieldcatalog TO gd_fieldcat..

CLEAR fieldcatalog.

fieldcatalog-fieldname = 'MENGE'.

fieldcatalog-scrtext_m = 'PO quantity'.

fieldcatalog-outputlen = 15.

fieldcatalog-col_pos = 5.

APPEND fieldcatalog TO gd_fieldcat..

CLEAR fieldcatalog.

fieldcatalog-fieldname = 'MEINS'.

fieldcatalog-scrtext_m = 'Order Unit'.

fieldcatalog-outputlen = 15.

fieldcatalog-col_pos = 6.

APPEND fieldcatalog TO gd_fieldcat..

CLEAR fieldcatalog.

fieldcatalog-fieldname = 'NETPR'.

fieldcatalog-scrtext_m = 'Net Price'.

fieldcatalog-outputlen = 15.

fieldcatalog-col_pos = 7.

fieldcatalog-datatype = 'CURR'.

APPEND fieldcatalog TO gd_fieldcat..

CLEAR fieldcatalog.

fieldcatalog-fieldname = 'PEINH'.

fieldcatalog-scrtext_m = 'Price Unit'.

fieldcatalog-outputlen = 15.

fieldcatalog-col_pos = 8.

APPEND fieldcatalog TO gd_fieldcat..

CLEAR fieldcatalog.

ENDFORM. " BUILD_FIELDCATALOG

*&---------------------------------------------------------------------*

*& Form BUILD_LAYOUT

*&---------------------------------------------------------------------*

* Build layout for ALV grid report

*----------------------------------------------------------------------*

FORM build_layout.

gd_layout-no_input = 'X'.

gd_layout-colwidth_optimize = 'X'.

gd_layout-totals_text = 'Totals'(201).

* gd_layout-totals_only = 'X'.

* gd_layout-f2code = 'DISP'. "Sets fcode for when double

* "click(press f2)

* gd_layout-zebra = 'X'.

* gd_layout-group_change_edit = 'X'.

* gd_layout-header_text = 'helllllo'.

ENDFORM. " BUILD_LAYOUT

*&---------------------------------------------------------------------*

*& Form build_hierarchy_header

*&---------------------------------------------------------------------*

* build hierarchy-header-information

*----------------------------------------------------------------------*

* -->P_L_HIERARCHY_HEADER structure for hierarchy-header

*----------------------------------------------------------------------*

FORM build_hierarchy_header CHANGING

p_hierarchy_header TYPE treev_hhdr.

p_hierarchy_header-heading = 'Hierarchy Header'(013).

p_hierarchy_header-tooltip = 'This is the Hierarchy Header !'(014).

p_hierarchy_header-width = 30.

p_hierarchy_header-width_pix = ''.

ENDFORM. " build_hierarchy_header

*&---------------------------------------------------------------------*

*& Form BUILD_REPORT_TITLE

*&---------------------------------------------------------------------*

* Build table for ALVtree header

*----------------------------------------------------------------------*

* <-> p1 Header details

* <-> p2 Logo value

*----------------------------------------------------------------------*

FORM build_report_title CHANGING

pt_report_title TYPE slis_t_listheader

pa_logo TYPE sdydo_value.

DATA: ls_line TYPE slis_listheader,

ld_date(10) TYPE c.

* List Heading Line(TYPE H)

CLEAR ls_line.

ls_line-typ = 'H'.

* ls_line-key "Not Used For This Type(H)

ls_line-info = 'PO ALVTree Display'.

APPEND ls_line TO pt_report_title.

* Status Line(TYPE S)

ld_date(2) = sy-datum+6(2).

ld_date+2(1) = '/'.

ld_date+3(2) = sy-datum+4(2).

ld_date+5(1) = '/'.

ld_date+6(4) = sy-datum(4).

ls_line-typ = 'S'.

ls_line-key = 'Date'.

ls_line-info = ld_date.

APPEND ls_line TO pt_report_title.

* Action Line(TYPE A)

CLEAR ls_line.

ls_line-typ = 'A'.

CONCATENATE 'Report: ' sy-repid INTO ls_line-info SEPARATED BY space.

APPEND ls_line TO pt_report_title.

ENDFORM.

*&---------------------------------------------------------------------*

*& Form BUILD_VARIANT

*&---------------------------------------------------------------------*

* Build variant

*----------------------------------------------------------------------*

FORM build_variant.

* Set repid for storing variants

gd_variant-report = sy-repid.

ENDFORM. " BUILD_VARIANT