Dynamic Internal tables

[former_member2382]

Hi,

Would like to know about the Dynamic Internal tables. How do we use them and in what conditions. Can you please elaborate in detail.

Many thanks.

Parvez.

[former_member2382]

Hi,

Would like to know about the Dynamic Internal tables. How do we use them and in what conditions. Can you please elaborate in detail.

Many thanks.

Parvez.

[Former Member]

hi,

Dynanmic internal table has nothing to do with include file etc.

It has to do with field-symbols.

If your requirement is creating a dynamic internal table,

(provided u have the information about which-which fields should be in the table)

, then u can use the below code

There is an INDEPENDENT FORM

whose inputs are FIELD LIST

and from those, it consructs dynamic table.

. Here is the program.

the dynamic table name will be

<DYNTABLE>.

U can use this program (FORM in this program)

to generate any kind of internal table

by specifying some inputs (ie. field list)

REPORT abc.

*----

---

COMPULSORY

FIELD-SYMBOLS: <dyntable> TYPE ANY TABLE.

FIELD-SYMBOLS: <dynline> TYPE ANY.

DATA: lt TYPE lvc_t_fcat.

DATA: ls TYPE lvc_s_fcat.

FIELD-SYMBOLS: <fld> TYPE ANY.

DATA : fldname(50) TYPE c.

*----

---

PARAMETERS : infty(4) TYPE c OBLIGATORY.

DATA : iname LIKE dd02l-tabname.

START-OF-SELECTION.

*----

---

GET INFO

CONCATENATE 'P' infty INTO iname.

DATA : ddfields LIKE ddfield OCCURS 0 WITH HEADER LINE.

CALL FUNCTION 'DD_NAMETAB_TO_DDFIELDS'

EXPORTING

tabname = iname

TABLES

ddfields = ddfields.

.

*----

---

CONSTRUCT FIELD LIST

LOOP AT ddfields.

ls-fieldname = ddfields-fieldname.

APPEND ls TO lt.

ENDLOOP.

*----

---

PERFORM

PERFORM mydyntable USING lt.

BREAK-POINT.

*----

---

• INDEPENDENT FORM

*----

---

FORM mydyntable USING lt TYPE lvc_t_fcat .

*----

---

Create Dyn Table From FC

FIELD-SYMBOLS: <fs_data> TYPE REF TO data.

FIELD-SYMBOLS: <fs_1>.

FIELD-SYMBOLS: <fs_2> TYPE ANY TABLE.

DATA: lt_data TYPE REF TO data.

ASSIGN lt_data TO <fs_data>.

CALL METHOD cl_alv_table_create=>create_dynamic_table

EXPORTING

it_fieldcatalog = lt

IMPORTING

ep_table = <fs_data>

EXCEPTIONS

generate_subpool_dir_full = 1

OTHERS = 2.

IF sy-subrc <> 0.

ENDIF.

*----

---

Assign Dyn Table To Field Sumbol

ASSIGN <fs_data>->* TO <fs_1>.

ASSIGN <fs_1> TO <fs_2>.

ASSIGN <fs_1> TO <dyntable>.

ENDFORM. "MYDYNTABLE

<b>Reward Points if it is helpful</b>

Thanks

ASHOK

[Former Member]

Hi,

dynamic internal table is a table which is not defined until runtime, inside ABAP code.

Dynamic internal table is internal table that we create on the fly with flexible column numbers.

Sample OCde:

 type-pools : abap. 
  field-symbols: <dyn_table> type standard table, 
               <dyn_wa>, 
               <dyn_field>. 
  data: dy_table type ref to data, 
      dy_line  type ref to data, 
      xfc type lvc_s_fcat, 
      ifc type lvc_t_fcat. 
  selection-screen begin of block b1 with frame. 
parameters: p_table(30) type c default 'T001'. 
selection-screen end of block b1. 
  start-of-selection. 
    perform get_structure. 
  perform create_dynamic_itab.      **********Creates a dyanamic internal table********** 
  perform get_data. 
  perform write_out. 
  form get_structure. 
  data : idetails type abap_compdescr_tab, 
       xdetails type abap_compdescr. 
  data : ref_table_des type ref to cl_abap_structdescr. 
  * Get the structure of the table. 
  ref_table_des ?=  
      cl_abap_typedescr=>describe_by_name( p_table ). 
  idetails[] = ref_table_des->components[]. 
    loop at idetails into xdetails. 
    clear xfc. 
    xfc-fieldname = xdetails-name . 
    xfc-datatype = xdetails-type_kind. 
    xfc-inttype = xdetails-type_kind. 
    xfc-intlen = xdetails-length. 
    xfc-decimals = xdetails-decimals. 
    append xfc to ifc. 
  endloop. 
  endform. 
  form create_dynamic_itab. 
  * Create dynamic internal table and assign to FS 
  call method cl_alv_table_create=>create_dynamic_table 
               exporting 
                  it_fieldcatalog = ifc 
               importing 
                  ep_table        = dy_table. 
    assign dy_table->* to <dyn_table>. 
  * Create dynamic work area and assign to FS 
  create data dy_line like line of <dyn_table>. 
  assign dy_line->* to <dyn_wa>. 
  endform. 
    
  form get_data. 
  * Select Data from table. 
  select * into table <dyn_table> 
             from (p_table). 
  endform. 
   Write out data from table. 
  loop at <dyn_table> into <dyn_wa>. 
    do. 
      assign component  sy-index   
         of structure <dyn_wa> to <dyn_field>. 
      if sy-subrc <> 0. 
        exit. 
      endif. 
      if sy-index = 1. 
        write:/ <dyn_field>. 
      else. 
        write: <dyn_field>. 
      endif. 
    enddo. 
  endloop.

Regards

Sudheer

[Former Member]

How to create a Dynamic Internal Table or Array?

Can you create an internal table dynamically? (at run time)

Yes , you can create a Dynamic Internal table .Just chek out this program .

type-pools : abap.

field-symbols: <dyn_table> type standard table,

<dyn_wa>,

<dyn_field>.

data: dy_table type ref to data,

dy_line type ref to data,

xfc type lvc_s_fcat,

ifc type lvc_t_fcat.

selection-screen begin of block b1 with frame.

parameters: p_table(30) type c default 'T001'.

selection-screen end of block b1.

start-of-selection.

perform get_structure.

perform create_dynamic_itab. *********Creates a dyanamic internal table*********

perform get_data.

perform write_out.

form get_structure.

data : idetails type abap_compdescr_tab,

xdetails type abap_compdescr.

data : ref_table_des type ref to cl_abap_structdescr.

• Get the structure of the table.

ref_table_des ?=

cl_abap_typedescr=>describe_by_name( p_table ).

idetails[] = ref_table_des->components[].

loop at idetails into xdetails.

clear xfc.

xfc-fieldname = xdetails-name .

xfc-datatype = xdetails-type_kind.

xfc-inttype = xdetails-type_kind.

xfc-intlen = xdetails-length.

xfc-decimals = xdetails-decimals.

append xfc to ifc.

endloop.

endform.

form create_dynamic_itab.

• Create dynamic internal table and assign to FS

call method cl_alv_table_create=>create_dynamic_table

exporting

it_fieldcatalog = ifc

importing

ep_table = dy_table.

assign dy_table->* to <dyn_table>.

• Create dynamic work area and assign to FS

create data dy_line like line of <dyn_table>.

assign dy_line->* to <dyn_wa>.

endform.

form get_data.

• Select Data from table.

select * into table <dyn_table>

from (p_table).

endform.

Write out data from table.

loop at <dyn_table> into <dyn_wa>.

do.

assign component sy-index

of structure <dyn_wa> to <dyn_field>.

if sy-subrc <> 0.

exit.

endif.

if sy-index = 1.

write:/ <dyn_field>.

else.

write: <dyn_field>.

endif.

enddo.

endloop.

-

---

REPORT ZCLUST1 .

• Example: how to create a dynamic internal table

• The dynamic internal table stucture

DATA: BEGIN OF STRUCT OCCURS 10,

FILDNAME(8) TYPE C,

ABPTYPE TYPE C,

LENGTH TYPE I,

END OF STRUCT.

• The dynamic program source table

DATA: BEGIN OF INCTABL OCCURS 10,

LINE(72),

END OF INCTABL.

DATA: LNG TYPE I, TYPESRTING(6).

• Sample dynamic internal table stucture

STRUCT-FILDNAME = 'field1'. STRUCT-ABPTYPE = 'c'. STRUCT-LENGTH = '6'.

APPEND STRUCT. CLEAR STRUCT.

STRUCT-FILDNAME = 'field2'. STRUCT-ABPTYPE = 'd'.

APPEND STRUCT. CLEAR STRUCT.

STRUCT-FILDNAME = 'field3'. STRUCT-ABPTYPE = 'i'.

APPEND STRUCT. CLEAR STRUCT.

• Create the dynamic internal table definition in the dyn. program

INCTABL-LINE = 'program zdynpro.'. APPEND INCTABL.

INCTABL-LINE = 'data: begin of dyntab occurs 10,'. APPEND INCTABL.

LOOP AT STRUCT.

INCTABL-LINE = STRUCT-FILDNAME.

LNG = STRLEN( STRUCT-FILDNAME ).

IF NOT STRUCT-LENGTH IS INITIAL .

TYPESRTING(1) = '('.

TYPESRTING+1 = STRUCT-LENGTH.

TYPESRTING+5 = ')'.

CONDENSE TYPESRTING NO-GAPS.

INCTABL-LINE+LNG = TYPESRTING.

ENDIF.

INCTABL-LINE+15 = 'type '.

INCTABL-LINE+21 = STRUCT-ABPTYPE.

INCTABL-LINE+22 = ','.

APPEND INCTABL.

ENDLOOP.

INCTABL-LINE = 'end of dyntab. '.

APPEND INCTABL.

• Create the code processes the dynamic internal table

INCTABL-LINE = ' '. APPEND INCTABL.

INCTABL-LINE = 'dyntab-field1 = ''aaaaaa''.'. APPEND INCTABL.

INCTABL-LINE = 'dyntab-field1 = ''19970814''.'. APPEND INCTABL.

INCTABL-LINE = 'dyntab-field1 = 1.'. APPEND INCTABL.

INCTABL-LINE = 'append dyntab.'. APPEND INCTABL.

INCTABL-LINE = ' '. APPEND INCTABL.

INCTABL-LINE = 'loop at dyntab.'. APPEND INCTABL.

INCTABL-LINE = 'write: / dyntab.'. APPEND INCTABL.

INCTABL-LINE = 'endloop.'. APPEND INCTABL.

• Create and run the dynamic program

INSERT REPORT 'zdynpro'(001) FROM INCTABL.

SUBMIT ZDYNPRO.

-

---

or Just try out this simpler dynamic internal tables

DATA: itab TYPE STANDARD TABLE OF spfli,

wa LIKE LINE OF itab.

DATA: line(72) TYPE c,

list LIKE TABLE OF line(72).

START-OF-SELECTION.

*line = ' CITYFROM CITYTO '.

line = ' AIRPTO '.

APPEND line TO list.

SELECT DISTINCT (list)

INTO CORRESPONDING FIELDS OF TABLE itab

FROM spfli.

IF sy-subrc EQ 0.

LOOP AT itab INTO wa.

• WRITE: / wa-cityfrom, wa-cityto.

WRITE 😕 wa-airpto.

ENDLOOP.

ENDIF.

sample.

REPORT zzz_test1

NO STANDARD PAGE HEADING

MESSAGE-ID zcs_c2c_001.

type-pools : abap.

field-symbols: <dyn_table> type standard table,

<dyn_wa>,

<dyn_field>.

data: dy_table type ref to data,

dy_line type ref to data,

xfc type lvc_s_fcat,

ifc type lvc_t_fcat.

selection-screen begin of block b1 with frame.

parameters: p_table(30) type c default 'T001'.

selection-screen end of block b1.

start-of-selection.

perform get_structure.

perform create_dynamic_itab.

perform get_data.

perform write_out.

form get_structure.

data : idetails type abap_compdescr_tab,

xdetails type abap_compdescr.

data : ref_table_des type ref to cl_abap_structdescr.

• Get the structure of the table.

ref_table_des ?=

cl_abap_typedescr=>describe_by_name( p_table ).

idetails[] = ref_table_des->components[].

loop at idetails into xdetails.

clear xfc.

xfc-fieldname = xdetails-name .

xfc-datatype = xdetails-type_kind.

xfc-intlen = xdetails-length.

xfc-decimals = xdetails-decimals.

append xfc to ifc.

endloop.

endform.

form create_dynamic_itab.

• Create dynamic internal table and assign to FS

call method cl_alv_table_create=>create_dynamic_table

exporting

it_fieldcatalog = ifc

importing

ep_table = dy_table.

assign dy_table->* to <dyn_table>.

• Create dynamic work area and assign to FS

create data dy_line like line of <dyn_table>.

assign dy_line->* to <dyn_wa>.

endform.

form get_data.

• Select Data from table.

select * into table <dyn_table>

from (p_table).

endform.

form write_out.

• Write out data from table.

loop at <dyn_table> into <dyn_wa>.

do.

assign component sy-index

of structure <dyn_wa> to <dyn_field>.

if sy-subrc <> 0.

exit.

endif.

if sy-index = 1.

write:/ <dyn_field>.

else.

write: <dyn_field>.

endif.

enddo.

endloop.

endform.

link

/people/subramanian.venkateswaran2/blog/2004/11/19/dynamic-internal-table

http://www.sap-img.com/ab030.htm

https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/dynamicInternalTable&

/people/subramanian.venkateswaran2/blog/2004/11/19/dynamic-internal-table

regards,

Prabhu

reward if it is helpful

[Former Member]

Hi,

Check this simple report.

PARAMETERS: P_COL1 TYPE I,

P_COL2 TYPE I.

FIELD-SYMBOLS: <FS> TYPE ANY.

DATA: CHECK.

TYPES: BEGIN OF TYP_ITAB,

COL1 TYPE I,

COL2 TYPE I,

COL3 TYPE I,

COL4 TYPE I,

COL5 TYPE I,

COL6 TYPE I,

END OF TYP_ITAB.

DATA: ITAB TYPE TABLE OF TYP_ITAB, WA LIKE LINE OF ITAB.

WA-COL1 = 1.

WA-COL2 = 2.

WA-COL3 = 3.

WA-COL4 = 4.

WA-COL5 = 5.

WA-COL6 = 6.

APPEND WA TO ITAB.

WA-COL1 = 1.

WA-COL2 = 2.

WA-COL3 = 3.

WA-COL4 = 4.

WA-COL5 = 5.

WA-COL6 = 6.

APPEND WA TO ITAB.

DATA: COL1(20),

COL2(20),

CHAR,

CHAR2.

WRITE P_COL1 TO CHAR.

CONCATENATE 'COL' CHAR INTO COL1.

WRITE P_COL2 TO CHAR.

CONCATENATE 'COL' CHAR INTO COL2.

*FIELD-SYMBOLS <F> TYPE ANY.

*ASSIGN (COL1) TO <F>.

DATA: BEGIN OF ITAB1 OCCURS 0,

COL1 TYPE I,

COL2 TYPE I,

END OF ITAB1.

FIELD-SYMBOLS: <FS1> TYPE ANY,

<FS2> TYPE ANY.

DATA: VAR TYPE I.

LOOP AT ITAB ASSIGNING <FS>.

• IF SY-TABIX = 1.

ASSIGN COMPONENT COL1 OF STRUCTURE <FS> TO <FS1>.

• ELSE.

ASSIGN COMPONENT COL2 OF STRUCTURE <FS> TO <FS2>.

• ENDIF.

• APPEND <FS1> TO ITAB1.

MOVE <FS1> TO ITAB1-COL1.

MOVE <FS2> TO ITAB1-COL2.

APPEND ITAB1.

• WRITE:/ <FS1>,<FS2>.

ENDLOOP.

LOOP AT ITAB1.

WRITE:/ ITAB1-COL1, ITAB1-COL2.

ENDLOOP.

Regards