Difference between user exit&customer exit

[Former Member]

what is the difference between user exit and customer exit

[Former Member]

userexits are used inSD module only but customer exits are in SD, MM and PP also

User Exits are "form-based" custom enhancements.

Customer Exits are Function Module-based custom enhancements.

User Exit

1. Implemented as Subroutines.

2. Created in SAP namespace.

3. You require access key to make changes

Customer Exit

1.Implemented as FM.

2. Created in customer namespace.

3. Do not require access key to make changes.

[Former Member]

Hi,

Difference between user exits & customer exits:

User exit - A user exit is a three character code that instructs the system to access a program during system processing.

SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.

UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number

Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.

Regards,

Bhaskar

[Former Member]

Hi

*User Exit * : A user exit is a three character code that instructs the system to access a program during system processing.

SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.

UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number.

Customer Exit : The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks

Reward if useful.

Thanks

Swati

[Former Member]

hi,

USER EXITS->

1. Introduction:

User exits (Function module exits) are exits developed by SAP.

The exit is implementerd as a call to a functionmodule.

The code for the function module is writeen by the developer.

You are not writing the code directly in the function module,

but in the include that is implemented in the function module.

The naming standard of function modules for functionmodule exits is:

EXIT_<program name><3 digit suffix>

The call to a functionmodule exit is implemented as:

CALL CUSTOMER.-FUNCTION ❤️ digit suffix>

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

CUSTOMER EXITS-> t-code CMOD.

As of Release 4.6A SAP provides a new enhancement technique, the Business Add-Ins.

Among others, this enhancement technique has the advantage of

being based on a multi-level system landscape (SAP, country versions, IS solutions, partner,

customer, and so on)

instead of a two-level landscape (SAP, customer) as with the customer exits.

You can create definitions and implementations of business add-ins at any level of the system landscape.

To unify enhancements of the SAP Standard you can migrate customer exits to business add-ins.

http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm

*****************

In order to find out the user exits for any tcode,

1. get the developement class of the tcode from SE93.

2. Now goto transaction SMOD and press F4,

3. give in the Deve class in the dev class and Press ENTER

this will show u the exits for any tcode.

or execute this report

http://www.erpgenie.com/sap/abap/code/abap26.htm

which gives the list of exits for a tcode

http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm

For information on Exits, check these links

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sapgenie.com/abap/code/abap26.htm

http://www.sap-img.com/abap/what-is-user-exits.htm

http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction

http://www.easymarketplace.de/userexit.php

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sappoint.com/abap/userexit.pdfUser-Exit

Regards

Kiran sURE

[Former Member]

Hi,

User exit - A user exit is a three character code that instructs the system to access a program during system processing.

SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.

UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number

Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.

The program for transaction VA01 Create salesorder is SAPMV45A

If you search for CALL CUSTOMER-FUNCTION i program

SAPMV45A you will find ( Among other user exits):

CALL CUSTOMER-FUNCTION '003'

exporting

xvbak = vbak

xvbuk = vbuk

xkomk = tkomk

importing

lvf_subrc = lvf_subrc

tables

xvbfa = xvbfa

xvbap = xvbap

xvbup = xvbup.

The exit calls function module EXIT_SAPMV45A_003

Development

Creating a Project to include the enhancement

1. Go to transaction CMOD and create a project.

2. Enter a description for the project. Then, click on the pushbutton ‘Enhancement Assignments’ in the Application Toolbar.

3. Enter the name of the enhancement and Save.

4. Go to ‘Components’.

Creating Custom Include for ANLU

The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.

Create the include structure with three new fields, as required. Then, save and activate it.

Develop the subscreen and the program

Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.

Create it as subscreen.

Then, go to the Layout of the screen and create three new fields from Database table ANLU.

Drag the fields in the screen body and place them.

Then, save and activate the screen and come back to screen flow editor.

Create the PAI module to add validation for field “Location 2”, as required .

Activate the whole function group and come out.

Write code in the Function Exits to synchronize the programs

Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.

Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:

Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.

Then, activate everything – the whole project and come out.

Complete the configuration to link the subscreen

The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.

Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.

Here, the requirement is to create these three custom fields in the tab page ‘General’ of asset master screen ( AS01/AS02/AS03/AS91).

Determine the Layout

To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class ‘1000’ and click on folder ‘General Assignment of Layout’.

Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout ‘SAP’ cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.

Create new tab layout

Go to transaction AOLA. Copy the tab layout ‘SAP’ to create another layout, say, YSUB.

System will copy all the settings and will inform you about that.

Select your newly created layout and double-click on the folder ‘Tab page titles’.

You want to put your custom fields in the tab page “General”. So, select this tab page entry and double-click on the folder "Position of Groups".

Here, all the field groups currently residing in the tab-page “General” are shown. Add an entry for your newly created fields.

Select the group box from the list. An entry will come with “U” padded with the custom subscreen prepared by you.

Then, save and come out.

Assign the new Layout to Asset Class

Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.

Save and come out.

Test the Exit

Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to them…save. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.

Please check these links for more information.

http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm

http://www.sapdevelopment.co.uk/enhance/enhancehome.htm

http://www.sap-img.com/abap/what-is-user-exits.htm

Regards,

Raj

[Former Member]

HI,

USER EXITS are FORMS and are called by SAP standard programs

using PERFORM.

CUSTOMER EXITS are FUNCTIONS so they are called using CALL

FUNCTION (or more exactly CALL CUSTOMER FUNCTION).

2.

Inside the form (user exit) you can read and change almost

any global data from host program.

Inside a function (customer exit) you can only acces your

import/export/changing/tables parameters.

3.

User exits are more flexible because you have more

information to use in your code but on the other hand , it

is very easy to manipulate erroneously global data and lead

the standard program to a dump or even to make database

inconsistent.

Customer exits are more restrictive but you are sure any

change you can make to any parameters will never lead to

inconsistency

4.

User-exit doesn’t have any classification.

In customer-exit we have function-module exit , screen exit

, menu exit.

5.

User exits are Basically designed For SD module.

Costomer exits Are available for MM,SD,FI,HR…..Basically

designed for all modules.

[Former Member]

Hi

Difference between user exits & customer exits:

User exit - A user exit is a three character code that instructs the system to access a program during system processing.

SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.

UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number

Customer exit - The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks

[Former Member]

Hi bindu,

1. Good question !

2. Previously there were only user-exits.

3. Then came the concept of customer-exits.

4.

user exits were nothing but

subroutines

FORM/PERFORM

called from standard programs.

5. The FORM defintion was placed inside

an empty include file.

6. So It was called EVERYTIME.

and we need to MODIFY/REPAIR the

standard include .

7. Then it came with concept of customer-exit

8. It consists of calling a FUNCTION MODULE,

which is called only if

the user-exit is ACTIVATED (other wise not called)

In this case, the code in put inside

a pre-defined Z include.

*----

---

9. Functionality of both is same, howerver

we can note the following important differences

a) Customer exit is called only if activated.

(hence, it does not waste resources)

b) in customer exit, REPAIR does not happen

to the standard include.

regards,

amit m.

[Former Member]

Hi,

User exits (Function module exits) are exits developed by SAP.

The exit is implementerd as a call to a functionmodule.

The code for the function module is writeen by the developer.

You are not writing the code directly in the function module,

but in the include that is implemented in the function module.

As of Release 4.6A SAP provides a new enhancement technique, the Business Add-Ins.

Among others, this enhancement technique has the advantage of

being based on a multi-level system landscape (SAP, country versions, IS solutions, partner,

customer, and so on)

instead of a two-level landscape (SAP, customer) as with the customer exits.

user exits are provided function modules, with no implementations

customer exits are enhancements, like z includes that we are wrinting.

The R/3 enhancement concept allows you to add your own functionality to SAP’s standard business applications without having to modify the original applications. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.

AMAL

[Former Member]

hi,

User exits :User exits are actually empty subroutines that SAP developers provide for you. You can fill them with your own source code.The original purpose of user exits was to allow the user to avoid modification adjustment.

Customer exits: A pre-planned enhancement to the standard SAP System.SAP anticipates potential customer requests not already implemented in the standard system by predefining them as empty modification modules. Customers fill these modules with their own logic according to their own requirements.SAP creates customer exits using the Transaction SMOD. From these customer exits, customers then use the Transaction CMOD to choose the enhancements they want to process, assign them to enhancement projects, edit the components, and activate the relevant projects.

Using customer exits guarantees upwards compatibility. This is because calls to exits from the standard software and the validity of the call interface are retained, even in future release upgrades.SAP creates customer exits for specific programs,screens,Menus within standard R/3 applications.

pls reward if helpful.

Thanks,

Rajyalakshmi.