dialog programming with table control

[Former Member]

Can anyone explain me how to create a screen with table control for updating custom tables with a simple example? I appreciate your responses

[former_member673464]

hi..

Check these demo programs

<b>demo_dynpro_tabcont_loop

demo_dynpro_tabcont_loop_at.</b>

To handle table controls in ABAP programs, you must declare a control in the declaration part of the program for each table control using the following statement:

CONTROLS <ctrl> TYPE TABLEVIEW USING SCREEN <scr>.

where <ctrl> is the name of the table control on a screen in the ABAP program. The control allows the ABAP program to read the attributes of the table control and to influence the control. The statement also declares a deep structure of name <ctl>. The data type of the structure corresponds to the type CXTAB_CONTROL defined in the type group CXTAB in the ABAP Dictionary.

At runtime the components of the structure contain the attributes of the table control. Several of the initial values are determined in the Screen Painter. The initial value for the control <ctl> is taken from the screen which is determined using the addition USING.

If you write the statement

REFRESH CONTROL <ctrl> FROM SCREEN <scr>.

you can initialize a table control at any time with the initial value of a screen <scr>. Values that are not taken from the settings in the Screen Painter, are set to the current status of the table control at PAI.

Structure CXTAB_CONTROL

The deep structure CXTAB_CONTROL contains the general attributes of the table control on the highest level. The component CXTAB_CONTROL is a table of the structure CXTAB_COLUMN and contains the attributes of a column. The component CXTAB_CONTROL-COLS-SCREEN is a flat structure of the same type as system table SCREEN and contains the attributes of the individual screen elements.

regards,

veeresh

[Former Member]

Following is a sample code of handling table control in BDC.

REPORT Y730_BDC5 .

*HANDLING TABLE CONTROL IN BDC

DATA : BEGIN OF IT_DUMMY OCCURS 0,

DUMMY(100) TYPE C,

END OF IT_DUMMY.

DATA : BEGIN OF IT_XK01 OCCURS 0,

LIFNR(10) TYPE C,

BUKRS(4) TYPE C,

EKORG(4) TYPE C,

KTOKK(4) TYPE C,

NAME1(30) TYPE C,

SORTL(10) TYPE C,

LAND1(3) TYPE C,

SPRAS(2) TYPE C,

AKONT(6) TYPE C,

FDGRV(2) TYPE C,

WAERS(3) TYPE C,

END OF IT_XK01,

BEGIN OF IT_BANK OCCURS 0,

BANKS(3) TYPE C,

BANKL(10) TYPE C,

BANKN(10) TYPE C,

KOINH(30) TYPE C,

LIFNR(10) TYPE C,

END OF IT_BANK.

DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,

IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = 'C:\VENDOR.TXT'

FILETYPE = 'ASC'

TABLES

DATA_TAB = IT_DUMMY.

LOOP AT IT_DUMMY.

IF IT_DUMMY-DUMMY+0(2) = '11'.

IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).

IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).

IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).

IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).

IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).

IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).

IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).

IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).

IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).

IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).

IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).

APPEND IT_XK01.

ELSE.

IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).

IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).

IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).

IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).

IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).

APPEND IT_BANK.

ENDIF.

ENDLOOP.

LOOP AT IT_XK01.

REFRESH IT_BDCDATA.

perform bdc_dynpro using 'SAPMF02K' '0100'.

perform bdc_field using 'BDC_CURSOR'

'RF02K-REF_LIFNR'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'RF02K-LIFNR'

IT_XK01-LIFNR.

perform bdc_field using 'RF02K-BUKRS'

IT_XK01-BUKRS.

perform bdc_field using 'RF02K-EKORG'

IT_XK01-EKORG.

perform bdc_field using 'RF02K-KTOKK'

IT_XK01-KTOKK.

perform bdc_dynpro using 'SAPMF02K' '0110'.

perform bdc_field using 'BDC_CURSOR'

'LFA1-TELX1'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFA1-NAME1'

IT_XK01-NAME1.

perform bdc_field using 'LFA1-SORTL'

IT_XK01-SORTL.

perform bdc_field using 'LFA1-LAND1'

IT_XK01-LAND1.

perform bdc_field using 'LFA1-SPRAS'

IT_XK01-SPRAS.

perform bdc_dynpro using 'SAPMF02K' '0120'.

perform bdc_field using 'BDC_CURSOR'

'LFA1-KUNNR'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0130'.

perform bdc_field using 'BDC_CURSOR'

'LFBK-KOINH(02)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

DATA : FNAM(20) TYPE C,

IDX TYPE C.

MOVE 1 TO IDX.

LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.

CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKS.

CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKL.

CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKN.

CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-KOINH.

IDX = IDX + 1.

ENDLOOP.

perform bdc_dynpro using 'SAPMF02K' '0130'.

perform bdc_field using 'BDC_CURSOR'

'LFBK-BANKS(01)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_dynpro using 'SAPMF02K' '0210'.

perform bdc_field using 'BDC_CURSOR'

'LFB1-FDGRV'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFB1-AKONT'

IT_XK01-AKONT.

perform bdc_field using 'LFB1-FDGRV'

IT_XK01-FDGRV.

perform bdc_dynpro using 'SAPMF02K' '0215'.

perform bdc_field using 'BDC_CURSOR'

'LFB1-ZTERM'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0220'.

perform bdc_field using 'BDC_CURSOR'

'LFB5-MAHNA'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0310'.

perform bdc_field using 'BDC_CURSOR'

'LFM1-WAERS'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFM1-WAERS'

IT_XK01-WAERS.

perform bdc_dynpro using 'SAPMF02K' '0320'.

perform bdc_field using 'BDC_CURSOR'

'WYT3-PARVW(01)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_dynpro using 'SAPLSPO1' '0300'.

perform bdc_field using 'BDC_OKCODE'

'=YES'.

CALL TRANSACTION 'XK01' USING IT_BDCDATA

MODE 'A'

UPDATE 'S'

MESSAGES INTO IT_BDCMSGCOLL.

ENDLOOP.

FORM BDC_DYNPRO USING PROG SCR.

CLEAR IT_BDCDATA.

IT_BDCDATA-PROGRAM = PROG.

IT_BDCDATA-DYNPRO = SCR.

IT_BDCDATA-DYNBEGIN = 'X'.

APPEND IT_BDCDATA.

ENDFORM.

FORM BDC_FIELD USING FNAM FVAL.

CLEAR IT_BDCDATA.

IT_BDCDATA-FNAM = FNAM.

IT_BDCDATA-FVAL = FVAL.

APPEND IT_BDCDATA.

ENDFORM.

[Former Member]

First have to know the concept of Table control

The main purpose of table control is to display multiple records in a table like format.

so when to wants to display the multiple records, the internal table from which the table control has to be populated has to be kept in loop both in PAI and PBO.

see the doc

Check the below link:

http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F

http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm

http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm

http://sap.mis.cmich.edu/sap-abap/abap09/index.htm

You can also check the transaction ABAPDOCU which gives you lot of sample programs.

Also you can see the below examples...

Go to se38 and give demodynpro and press F4.

YOu will get a list of demo module pool programs.

One more T-Code is ABAPDOCU.

YOu can find more examples there.

See the prgrams:

DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement

DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB

http://www.geocities.com/ZSAPcHAT

http://www.allsaplinks.com/files/using_table_in_screen.pdf

reward points if useful

[Former Member]

Hi,

Look at the below demo Programs in SE38

DEMO_DYNPRO_TABLE_CONTROL_1

DEMO_DYNPRO_TABLE_CONTROL_2

Regards

Sudheer

[Former Member]

you can chk this demo program <b>DEMO_DYNPRO_TABCONT_LOOP_AT</b>

and use the UPDATE or MODIFY statement to update ur custom table

[Former Member]

Hi Deepthi,

It is better to create a table maintenance for the ztable you have created. It involves no coding (Or very minimal coding if required).

Regards,

Ravi