bdc

[Former Member]

hi,

what is different between lsmw and bdc ? which one is best.

[Former Member]

Hi,

LSMW and BDC are vastly different.

BDC (Batch Data Communication) is a technology used for data transfer. it is meant for transferring data thru SAP transactions itself. when u use BDC for data transfer, the sequence of steps is the same as when u use standard sap transaction screens for data upload. the only difference is that u can use different options for foreground/backgrou nd processing.

LSMW on the other hand is a tool that helps migrate data from a legacy system (non-sap system ) to SAP system. it offers u various options to use either batch input, direct input, BAPIs or idocs. it involves a series of some 17-18 steps to migrate data.

BDC:

Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.

Features :

BDC is an automatic procedure.

This method is used to transfer large amount of data that is available in electronic medium.

BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).

BDC uses normal transaction codes to transfer data.

Types of BDC :

CLASSICAL BATCH INPUT (Session Method)

CALL TRANSACTION

BATCH INPUT METHOD:

This method is also called as ‘CLASSICAL METHOD’.

Features:

Asynchronous processing.

Synchronous Processing in database update.

Transfer data for more than one transaction.

Batch input processing log will be generated.

During processing, no transaction is started until the previous transaction has been written to the database.

CALL TRANSACTION METHOD :

This is another method to transfer data from the legacy system.

Features:

Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.

Updating the database can be either synchronous or asynchronous. The program specifies the update type.

Transfer data for a single transaction.

Transfers data for a sequence of dialog screens.

No batch input processing log is generated.

LSMW:

The LSM Workbench is an R/3-based tool that supports You when transferring data from non-SAP systems ("Legacy Systems") to R/3 once or periodically.

The tool supports conversion of data of the legacy system in a convenient way. The data can then be imported into the R/3 system via batch input, direct input, BAPIs or IDocs.

Furthermore, the LSM Workbench provides a recording function that allows to generate a "data migration object" in an entry or change transaction.

The main advantages of the LSM Workbench:

• Part of R/3 and thus independent of individual platforms

• A variety of technical possibilities of data conversion:

• Data consistency due to standard import techniques:

Batch input

Direct input

BAPIs (Business Application Programming Interfaces)

IDocs (Intermediate Documents)

The import technique to be used in an individual case depends on the business object.

• Generation of the conversion program on the basis of defined rules

• Clear interactive process guide

• Interface for data in spreadsheet format

• Creation of data migration objects on the basis of recorded transactions

• Charge-free for SAP customers and SAP partners

Regards

Gaurav

[Former Member]

Hi jaya,

Hope this link helps u.

Regards....

Arun.

Reward pts if useful

[Former Member]

Hi,

LSMW and BDC are vastly different.

BDC (Batch Data Communication) is a technology used for data transfer. it is meant for transferring data thru SAP transactions itself. when u use BDC for data transfer, the sequence of steps is the same as when u use standard sap transaction screens for data upload. the only difference is that u can use different options for foreground/backgrou nd processing.

LSMW on the other hand is a tool that helps migrate data from a legacy system (non-sap system ) to SAP system. it offers u various options to use either batch input, direct input, BAPIs or idocs. it involves a series of some 17-18 steps to migrate data.

BDC:

Batch Data Communication (BDC) is the process of transferring data from one SAP System to another SAP system or from a non-SAP system to SAP System.

Features :

BDC is an automatic procedure.

This method is used to transfer large amount of data that is available in electronic medium.

BDC can be used primarily when installing the SAP system and when transferring data from a legacy system (external system).

BDC uses normal transaction codes to transfer data.

Types of BDC :

CLASSICAL BATCH INPUT (Session Method)

CALL TRANSACTION

BATCH INPUT METHOD:

This method is also called as ‘CLASSICAL METHOD’.

Features:

Asynchronous processing.

Synchronous Processing in database update.

Transfer data for more than one transaction.

Batch input processing log will be generated.

During processing, no transaction is started until the previous transaction has been written to the database.

CALL TRANSACTION METHOD :

This is another method to transfer data from the legacy system.

Features:

Synchronous processing. The system performs a database commit immediately before and after the CALL TRANSACTION USING statement.

Updating the database can be either synchronous or asynchronous. The program specifies the update type.

Transfer data for a single transaction.

Transfers data for a sequence of dialog screens.

No batch input processing log is generated.

LSMW:

The LSM Workbench is an R/3-based tool that supports You when transferring data from non-SAP systems ("Legacy Systems") to R/3 once or periodically.

The tool supports conversion of data of the legacy system in a convenient way. The data can then be imported into the R/3 system via batch input, direct input, BAPIs or IDocs.

Furthermore, the LSM Workbench provides a recording function that allows to generate a "data migration object" in an entry or change transaction.

The main advantages of the LSM Workbench:

• Part of R/3 and thus independent of individual platforms

• A variety of technical possibilities of data conversion:

• Data consistency due to standard import techniques:

Batch input

Direct input

BAPIs (Business Application Programming Interfaces)

IDocs (Intermediate Documents)

The import technique to be used in an individual case depends on the business object.

• Generation of the conversion program on the basis of defined rules

• Clear interactive process guide

• Interface for data in spreadsheet format

• Creation of data migration objects on the basis of recorded transactions

• Charge-free for SAP customers and SAP partners

i hope it is clear

http://www.allinterview.com/showanswers/1646

http://www.geekinterview.com/question_details/33450

Regards

Sudheer

[Former Member]

Hi Jaya Chandran,

Go through the following Differences for LSMW over BDC

Go through the following Document

BDC SESSION

CALL TRANSACTION

CALL DIALOG

What is BDC or batch input

The Batch Input is a SAP technic that allows automating the input in transactions. It lies on a BDC (Batch Data Commands) scenario.

BDC functions:

E BDC_OPEN_GROUP : Opens a session group

E BDC_CLOSE_GROUP : Closes a session

E BDC_INSERT : Insert a BDC scenario in the session

E The ABAP statement "CALL TRANSACTION" is also called to run directly a transaction from its BDC table.

It runs the program RSBDCSUB in order to launch automatically the session. The session management is done through the transaction code SM35.

The object itself is maintanable through the transaction SE24.

BDC methods:

Method

Description

Parameters

OPEN_SESSION

Opens a session

SUBRC (Return Code ? 0 OK)

SESSIONNAME (Session to be created)

CLOSE_SESSION

Closes a session

None

RESET_BDCDATA

Resets the BDC Internal Table...

None. Normally, for internal purposec

BDC_DYNPRO

Handles a new screen

PROGNAME (Name of the program)

DYNPRONR (Screen Number)

BDC_FIELD

Puts a value on the screen

FIELDNAME (Name of the field)

FIELDVALUE (Value to be passed)

CONSTRUCTOR

Constructor - Initializes NO_DATA

NODATA (No data character). The constructor is called automatically when the object is created.

RUN_SESSION

Launches a session with RSBDCBTC

None

CALL_TRANSACTION

Calls a transaction with the current BDC Data

MODE (Display Mode)

UPDATE (Update Mode)

TCODE (Transaction to be called)

BDC_INSERT

Inserts the BDC scenario in the session

TCODE (Transaction to be called)

BDC techniques used in programs:

1) Building a BDC table and calling a transaction,

2) Building a session and a set of BDC scenarios and keeping the session available in SM35,

3) Building a session and lauching the transaction right after closing the session.

-

---

BDC using Call Transaction

BDC using Call transaction involves calling an SAP transaction in back ground from within the ABAP

program. The process involves building an Internal BDC table containing the screen information needed to

execute the required transaction and then passing this to the Call transaction command (See code example).

The full procedure for creating a BDC program is as follows:

-

---

What is the difference between batch input and call transaction in BDC?

Session method.

1) synchronous processing.

2) can tranfer large amount of data.

3) processing is slower.

4) error log is created

5) data is not updated until session is processed.

Call transaction.

1) asynchronous processing

2) can transfer small amount of data

3) processing is faster.

4) errors need to be handled explicitly

5) data is updated automatically

-

---

BATINPUT/DIRECT INPUT

-

---

A: Batch-inputs can not be used to fill the "delivery due list" screen because it is not a dynpro. This is a standard SAP report. A SAP report (check with "System -> Status") may be called using SUBMIT sentence with the appropriate options . It is preferred to call a report than create a Batch-input program.

GO THROUGH THIS LINK

http://www.guidancetech.com/people/holland/sap/abap/zzsni001.htm

The LSM Workbench is an SAP R/3 based tool that supports the one-time or periodic transfer of data from non-SAP systems ("legacy systems") to SAP systems.

The LSM Workbench helps you to organize your data migration project and guides you through the process by using a clear sequence of steps.

The most common conversion rules are predefined. Reusable conversion rules assure consistent data conversion for different data objects.

LSMW vs DX Workbench

The LSM Workbench covers the following steps:

Read the legacy data from one or several files (e.g. spreadsheet tables, sequential files).

Convert the data from source format to target format.

Import the data using standard interfaces (Batch Input, Direct Input, BAPI, IDoc).

Experiences made in successful implementation projects have shown that using the LSM Workbench significantly contributes to accelerating data migration.

SAP provides this tool along with documentation to customers and partners free of charge.

Users of the LSM Workbench receive the usual support via SAP Net - R/3 Frontend (component BC-SRV-DX-LSM).

Releases:

Version 1.7.2 of the LSM Workbench ("LSMW 1.7.2") available

Attention : LSMW 1.7.2 requires an SAP R/3 system with SAP R/3 4.0 or SAP R/3 4.5.

Version 1.8.0 of the LSM Workbench (1.21mb) ("LSMW 1.8.0") available

Attention : LSMW 1.8.0 requires an SAP R/3 system with SAP R/3 4.6.

Version 3.0 of the LSM Workbench (1.89mb) ("LSMW 3.0") available for Web Application Server 6.10

Attention : LSMW 3.0 requires a SAP WAS 6.10. Functionality of version 1.7.2 and 3.0 are identical !

Version 4.0 of the LSM Workbench ("LSMW 4.0") integrated in Web Application Server 6.20

Attention : LSMW 4.0 is an integrated part of SAP WAS 6.20.

You will go for BDC when the it is Transactional Data

You will go for LSMW when the it is Master Data

Regards

Sreeni