BDC Session

[Former Member]

Hello,

Can any one tell me how to proceed with BDC using session method

[Former Member]

Hi Kring,

For which transaction you want BDC.

Check wiki if it can help you

https://wiki.sdn.sap.com/wiki/display/ABAP/DataTransfers-LSMW,ALE,+BDC

Regards,

Atish

[Former Member]

Go to SHDB, create a new recording session for the t-code mk01.

2. Go though the t-code and create an entry and complete the transaction.

3. Once that's done, it will record everthing, save and transfer it to a program.

4. Go to the program in change mode, upload the flat file into a internal table using FM 'upload' or 'gui_upload'.

5. Use the internal table to populate further interies into the tcode.

Please go through the following link to understand the process better:

http://www.sap-img.com/abap/learning-bdc-programming.htm

Please go through the following code also:

report ZABC_BDC

no standard page heading line-size 255.

include bdcrecx1.

*parameters: dataset(132) lower case.

• DO NOT CHANGE - the generated data section - DO NOT CHANGE ***

*

• If it is nessesary to change the data section use the rules:

• 1.) Each definition of a field exists of two lines

• 2.) The first line shows exactly the comment

• '* data element: ' followed with the data element

• which describes the field.

• If you don't have a data element use the

• comment without a data element name

• 3.) The second line shows the fieldname of the

• structure, the fieldname must consist of

• a fieldname and optional the character '_' and

• three numbers and the field length in brackets

• 4.) Each field must be type C.

*

• Generated data section with specific formatting - DO NOT CHANGE ***

data: begin of record,

• data element: MATNR

MATNR_001(018),

• data element: MBRSH

MBRSH_002(001),

• data element: MTART

MTART_003(004),

• data element: XFELD

KZSEL_01_004(001),

• data element: MAKTX

MAKTX_005(040),

• data element: MEINS

MEINS_006(003),

end of record.

• End generated data section ***

DATA : ITAB LIKE TABLE OF RECORD WITH HEADER LINE.

start-of-selection.

CALL FUNCTION 'UPLOAD'

EXPORTING

• CODEPAGE = ' '

FILENAME = 'C:\Documents and Settings\sa01.indelgpttrg\Desktop'

FILETYPE = 'DAT'

• ITEM = ' '

• FILEMASK_MASK = ' '

• FILEMASK_TEXT = ' '

• FILETYPE_NO_CHANGE = ' '

• FILEMASK_ALL = ' '

• FILETYPE_NO_SHOW = ' '

• LINE_EXIT = ' '

• USER_FORM = ' '

• USER_PROG = ' '

• SILENT = 'S'

• IMPORTING

• FILESIZE =

• CANCEL =

• ACT_FILENAME =

• ACT_FILETYPE =

TABLES

DATA_TAB = ITAB

• EXCEPTIONS

• CONVERSION_ERROR = 1

• INVALID_TABLE_WIDTH = 2

• INVALID_TYPE = 3

• NO_BATCH = 4

• UNKNOWN_ERROR = 5

• GUI_REFUSE_FILETRANSFER = 6

• OTHERS = 7

.

IF SY-SUBRC <> 0.

• MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

• WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

*perform open_dataset using dataset.

perform open_group.

*do.

*read dataset dataset into record.

*do.

LOOP AT ITAB.

if sy-subrc <> 0. exit. endif.

perform bdc_dynpro using 'SAPLMGMM' '0060'.

perform bdc_field using 'BDC_CURSOR'

'RMMG1-MTART'.

perform bdc_field using 'BDC_OKCODE'

'=AUSW'.

perform bdc_field using 'RMMG1-MATNR'

ITAB-MATNR_001.

perform bdc_field using 'RMMG1-MBRSH'

ITAB-MBRSH_002.

perform bdc_field using 'RMMG1-MTART'

ITAB-MTART_003.

perform bdc_dynpro using 'SAPLMGMM' '0070'.

perform bdc_field using 'BDC_CURSOR'

'MSICHTAUSW-DYTXT(01)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_field using 'MSICHTAUSW-KZSEL(01)'

ITAB-KZSEL_01_004.

perform bdc_dynpro using 'SAPLMGMM' '4004'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'BDC_CURSOR'

'MAKT-MAKTX'.

perform bdc_field using 'MAKT-MAKTX'

ITAB-MAKTX_005.

perform bdc_field using 'BDC_CURSOR'

'MARA-MEINS'.

perform bdc_field using 'MARA-MEINS'

ITAB-MEINS_006.

perform bdc_dynpro using 'SAPLSPO1' '0300'.

perform bdc_field using 'BDC_OKCODE'

'=YES'.

perform bdc_transaction using 'MM01'.

*enddo.

ENDLOOP.

perform close_group.

*perform close_dataset using dataset.

http://help.sap.com/saphelp_nw04/helpdata/en/69/c2501a4ba111d189750000e8322d00/frameset.htm

http://help.sap.com/saphelp_nw04/helpdata/en/fa/09715a543b11d1898e0000e8322d00/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/fa/097119543b11d1898e0000e8322d00/frameset.htm

http://myweb.dal.ca/hchinni/sap/bdc_home.htm

http://www.sapdevelopment.co.uk/bdc/bdchome.htm

http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm

http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html

Please reward the helpful entries.

[Former Member]

Hi

<b>Transaction Recorder (SHDB)</b>

How to Upload Presentation Server Flat file to SAP R/3 system???

How to upload application server file to R/3 system?

Definition

Example - Call Transaction Method

<b>Transaction Recorder (SHDB)</b>

Before you work with the Batch Input methods, you should know the purpose of the tool

Transaction Recorder.

Use:

You can use the transaction recorder to record a series of transactions and their screens.

Features:

You can use the recording to create

Data transfer programs that use batch input or CALL TRANSACTION

Batch input sessions

Test data

Function modules.

Note: It doesn’t record F1, F4 and Scrollbar movements

<b>Upload Flat file from Presentation Server to SAP R/3</b>

CALL FUNCTION ‘GUI_UPLOAD'

EXPORTING

CODEPAGE = ‘IBM'

FILENAME = P_UFILE

FILETYPE = 'DAT'

TABLES

DATA_TAB = INT_TAB

EXCEPTIONS

CONVERSION_ERROR = 1

FILE_OPEN_ERROR = 2

FILE_READ_ERROR = 3

INVALID_TYPE = 4

NO_BATCH = 5

UNKNOWN_ERROR = 6

INVALID_TABLE_WIDTH = 7

GUI_REFUSE_FILETRANSFER = 8

CUSTOMER_ERROR = 9

OTHERS = 10 .

IF SY-SUBRC NE 0.

MESSAGE E999(FR) WITH 'ERROR IN FILE UPLOAD'.

ENDIF.

<b>Upload file from application server to SAP R/3</b>

Open the the application server file

OPEN DATASET <dsn> FOR INPUT <mode>

Read the data from application server file

READ DATASET <dsn> INTO <wa>

And then close the application server file

CLOSE DATASET <dsn>

<b>Definition- Declaring BDC Table</b>

DATA: BDC_TAB LIKE STANDARD TABLE OF

BDCDATA INITIAL SIZE 6

WITH HEADER LINE .

The internal table used to collect the transaction’s information must be declared “LIKE BDCDATA”.

<b>Filling BDC Table – Method #1</b>

FORM FILL_BDC_TAB.

REFRESH BDC_TAB.

CLEAR BDC_TAB.

BDC_TAB-PROGRAM = ‘SAPMF02K’.

BDC_TAB-DYNPRO = ‘01016’.

BDC_TAB-DYNBEGIN = ‘X’.

APPEND BDC_TAB.

CLEAR BDC_TAB.

BDC_TAB-FNAM = ‘RF02K-LIFNR’.

BDC_TAB-FVAL = ‘TEST1’.

APPEND BDC_TAB.

CLEAR BDC_TAB.

BDC_TAB-FNAM = ‘RF02K-D0010’.

BDC_TAB-FVAL = ‘X’.

APPEND BDC_TAB.

CLEAR BDC_TAB.

BDC_TAB-PROGRAM = ‘SAPMF02K’.

BDC_TAB-DYNPRO = ‘0110’.

BDC_TAB-DYNBEGIN = ‘X’.

APPEND BDC_TAB.

CLEAR BDC_TAB.

BDC_TAB-FNAM = ‘LFA1-STRAS’.

BDC_TAB-FVAL = ‘123 Main St.’.

APPEND BDC_TAB.

CLEAR BDC_TAB.

BDC_TAB-FNAM = ‘BDC_OKCODE’.

BDC_TAB-FVAL = ‘/11’.

APPEND BDC_TAB.

ENDFORM.

<b>Filling BDC Table – Method #2</b>

FORM FILL_BDC_TAB.

REFRESH BDC_TAB.

PERFORM POPULATE_BDC_TAB

USING:

‘1’ ‘SAPMF02K’ ‘0106’,

‘ ‘ ‘RF02K-LIFNR’ ‘TEST1’,

‘ ‘ ‘RF02K-D0010’ ‘X’,

‘1’ ‘SAPMF02K’ ‘0110’,

‘ ‘ ‘LFA1-STRAS’, ‘123 Main St.’,

‘ ‘ ‘BDC_OKCODE’, ‘/11’.

ENDFORM.

FORM POPULATE_BDC_TAB USING FLAG VAR1 VAR2.

CLEAR BDC_TAB.

IF FLAG = ‘1’.

BDC_TAB-PROGRAM = VAR1.

BDC_TAB-DYNPRO = VAR2..

BDC_TAB-DYNBEGIN = ‘X’.

ELSE.

BDC_TAB-FNAM = VAR1.

BDC_TAB-FVAL = VAR2.

ENDIF.

APPEND BDC_TAB.

ENDFORM.

This two subroutine method to fill the BDC table is preferable because the “POPULATE_BDC_TABLE” subroutine is reusable throughout all batch input programs.

<b>Example #1 - Change Vendor (Call Transaction Method)</b>

Example #1- Declaration Section

REPORT Y180DM10.

DATA: BDC_TAB LIKE STANDARD TABLE OF

BDCDATA INITIAL SIZE 6 WITH HEADER LINE.

INFILE(20) VALUE ‘/tmp/bc180_file4’.

DATA: BEGIN OF INREC.

VENDNUM LIKE LFA1-LIFNR.

STREET LIKE LFA1-STRAS.

END OF INREC.

PARAMETERS: DISPMODE DEFAULT ‘A’,

UPDAMODE DEFAULT ‘S’.

START-OF-SELECTION.

OPEN DATASET INFILE

FOR INPUT IN TEXT MODE.

DO.

READ DATASET INFILE INTO INREC.

IF SY-SUBRC < > 0. EXIT. ENDIF.

PERFORM FILL_BDC_TAB.

CALL TRANSACTION ‘FK02’

USING BDC_TAB

MODE DISPMODE

UPDATE UPDAMODE.

IF SY-SUBRC < > 0.

WRITE: /‘ERROR’.

ENDIF.

ENDDO.

CLOSE DATASET INFILE.

<b>synchronous updating</b>

DO.

………

PERFORM FILL_BDC_TAB.

CALL TRANSACTION ‘FK02’

USING BDC_TAB

MODE ‘N’

UPDATE ‘S’.

IF SY-SUBRC < > 0.

WRITE: /‘ERROR’.

ENDIF.

ENDDO.

With synchronous updating, we can check SY-SUBRC to determine the success of the transaction and the actual update to the database.

<b>asynchronous updating</b>

DO.

………

PERFORM FILL_BDC_TAB.

CALL TRANSACTION ‘FK02’

USING BDC_TAB

MODE ‘N’

UPDATE ‘A’.

IF SY-SUBRC < > 0.

WRITE: /‘ERROR’.

ENDIF.

ENDDO.

With asynchronous updating, we can check SY-SUBRC to determine the success of the transaction only, not the actual update to the database.

<b>Error Handling</b>

Write an error report.

Send the record(s) in error to an error file.

Create a batch input session with the record(s) in error.

To store error messages ( CALL TRANSACTION )

data: begin of Tab_Mess occurs 0.

include structure bdcmsgcoll.

data : end of Tab_Mess,

CALL TRANSACTION ‘FK02’ USING BDC_TAB MODE ‘N’ UPDATE ‘S’

MESSAGES INTO TAB_MESS.

IF SY-SUBRC NE 0.

WRITE: / Tab_MESS-TCODE, Tab_MESS-DYNUMB, Tab_MESS-MSGTYP ,

Tab_MESS-MSGID.

ENDIF.

i am giving you example for Change Vendor you practice for ur tcode

For our example, we will use the “Change Vendor” transaction (“FK02”) to add a street address to an already existing vendor.

Step #1

Use “System&#61664;Status” menu path to determine online program name (SAPMF02K), screen number (0110)

Step #2

Use “F1” key and “Technical Info” pushbutton in each screen field to be filled to determine the field name.

Step #3

Determine how to proceed in the transaction

(save the record by clicking on the ‘Save’ pushbutton or pressing the ‘F11’ key).

BDC Table Contents

After researching the transaction we can determine the contents of the BDC table.

PROGRAM DYNPRO DYNBEGIN FNAM FVAL

SAMPF02K 0106 X

RF02K-LIFNR TEST1

RF02K-D0110 X

SAMPF02K 0110 X

LFA1-STRAS 123 Main St.

BDC_OKCODE /11

Batch Input Methods

“CALL TRANSACTION USING”

STATEMENT

Call transaction - for data transfer

Processing batch input data with CALL TRANSACTION USING is the faster of the two recommended data transfer methods. In this method, legacy data is processed inline in your data transfer program.

Syntax:

CALL TRANSACTION <tcode>

USING <bdc_tab>

MODE <mode>

UPDATE <update>

A Display all

E Display errors only

N No display

S Synchronous

A Asynchronous

L Local update

The process flow of CALL TRANSACTION

A program that uses CALL TRANSACTION USING to process legacy data should execute thefollowing steps:

Prepare a BDCDATA structure for the transaction that you wish to run.

Prepare a internal table to store error messages Tab_Mess like structure of BDCMSGCOLL.

With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:

CALL TRANSACTION ‘MM01' USING BDCDATA MODE 'A' UPDATE 'S'. MESSAGES INTO TAB_MESS.

IF SY-SUBRC <> 0.

<Error_handling>.

ENDIF.

Overview of Batch Input Session

The first batch input method is to create a batch input session. It is the processing of this batch input session that updates the database, not the execution of the batch input program.

<b>Reward if usefull</b>

[Former Member]

steps.

1.do recording in shdb.

2.create text file according to that with tab sapace.

3.in report create internal table.

4.call function gui_upload.

5.call function 'bdc_open_group'.

loop at bdcdata.

clear bdcdata.

bdcdata-progname = 'sapmf07k'.

bdcdata-dynpro = '1000'.

bdcdata-dynbegin = 'x'

bdcdata-fnam = 'vbeln'.

bdcdata-fval = '1000'.

6.call function 'bdc_insert'.

7.call function'bdc_close_group'.

8.execute.f8.

9.goto sm35.

10.select recording. and process.

[Former Member]

steps.

1.do recording in shdb.

2.create text file according to that with tab sapace.

3.in report create internal table.

4.call function gui_upload.

5.call function 'bdc_open_group'.

loop at bdcdata.

clear bdcdata.

bdcdata-progname = 'sapmf07k'.

bdcdata-dynpro = '1000'.

bdcdata-dynbegin = 'x'

bdcdata-fnam = 'vbeln'.

bdcdata-fval = '1000'.

6.call function 'bdc_insert'.

7.call function'bdc_close_group'.

8.execute.f8.

9.goto sm35.

10.select recording. and process.