BDC for PO CREATE USING ME21

[Former Member]

Iam Creating BDC Program bu using ME21 for Uploading PO.

Iam getting error at Income term2 in the Second Screen of ME21. Iam Passing this value through Excel Sheet But event then it is not picking. When i check in debugging the value of income term2 is populating.

Let me know what are the mandotory fields for creating PO using Me21.

Here iam also attaching the code, Please help us because it is very urgent.

report ZPOUPLOADME21

no standard page heading line-size 255.

*include bdcrecx1.

INCLUDE YMM_BDCRECX1.

*********************************************************************

• Internal Table T_BDCDATA to store BDC data

*********************************************************************

• Batchinputdata of single transaction

DATA: T_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.

*********************************************************************

• Internal Table T_BDC_MSG to store BDC messages

*********************************************************************

DATA: T_BDC_MSG LIKE STANDARD TABLE OF BDCMSGCOLL INITIAL

SIZE 0 WITH HEADER LINE.

DATA: V_FILE LIKE RLGRAP-FILENAME ,

V_COUNT(5) TYPE C,

V_MESSAGE_CNT(5) TYPE C .

DATA : BEGIN OF IT_DATA OCCURS 0,

LIFNR LIKE EKKO-LIFNR, " Vendor

BSART LIKE RM06E-BSART, " Order Type

BEDAT(10) TYPE C, " Date

EKORG LIKE EKKO-EKORG, " Purchasing Organization

EKGRP LIKE EKKO-EKGRP, " Purchasing Group

WERKS LIKE RM06E-WERKS, " Plant

INCO2 LIKE EKKO-INCO2, " Inco Terms

KNTTP LIKE EKPO-KNTTP, " A/C Assignment Category

EMATN LIKE EKPO-EMATN, " Material Number

MENGE LIKE EKPO-MENGE, " Purchase Order Quantity

NETPR LIKE EKPO-NETPR, " Net Price

MWSKZ LIKE EKPO-MWSKZ, " Tax Code

NPLNR LIKE MSEG-NPLNR, " Network

VORNR LIKE PSORDER-VORNR, " Operation

END OF IT_DATA.

START-OF-SELECTION.

PERFORM OPEN_GROUP.

PERFORM DATA_UPLOAD.

PERFORM CALL_TRANSACTION.

PERFORM CLOSE_GROUP.

PERFORM WRITE_ERROR.

&----

---

*& Form DATA_UPLOAD

&----

---

• text

-

---

• --> p1 text

• <-- p2 text

-

---

FORM DATA_UPLOAD.

*call function ws_upload to retrieve data from a flat file in the

*presentation server into an internal table

CALL FUNCTION 'UPLOAD'

EXPORTING

FILENAME = V_FILE

FILETYPE = 'DAT'

TABLES

DATA_TAB = IT_DATA

EXCEPTIONS

CONVERSION_ERROR = 1

INVALID_TABLE_WIDTH = 2

INVALID_TYPE = 3

NO_BATCH = 4

UNKNOWN_ERROR = 5

GUI_REFUSE_FILETRANSFER = 6

OTHERS = 7.

• if ws_upload fails then display appropriate message

IF SY-SUBRC 0.

• MESSAGE E000 WITH 'Data not Uploaded into internal table'.

ENDIF.

ENDFORM. " DATA_UPLOAD

&----

---

*& Form CALL_TRANSACTION

&----

---

• text

-

---

• --> p1 text

• <-- p2 text

-

---

FORM CALL_TRANSACTION.

DATA : V_IVDAT(10) TYPE C,

V_AKTIV(10) TYPE C,

V_MESSAGE(404) TYPE C.

REFRESH T_BDCDATA.

CLEAR T_BDCDATA.

V_COUNT = 0.

V_MESSAGE_CNT = 0.

LOOP AT IT_DATA .

V_COUNT = V_COUNT + 1.

*perform open_group.

perform bdc_dynpro using 'SAPMM06E' '0100'.

perform bdc_field using 'BDC_CURSOR'

'RM06E-WERKS'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'EKKO-LIFNR'

IT_DATA-LIFNR.

perform bdc_field using 'RM06E-BSART'

IT_DATA-BSART.

*perform bdc_field using 'RM06E-BEDAT'

• '24.01.2008'.

perform bdc_field using 'RM06E-BEDAT'

IT_DATA-BEDAT.

perform bdc_field using 'EKKO-EKORG'

IT_DATA-EKORG.

perform bdc_field using 'EKKO-EKGRP'

IT_DATA-EKGRP.

*perform bdc_field using 'RM06E-LPEIN'

• 'T'.

perform bdc_field using 'RM06E-WERKS'

IT_DATA-WERKS.

perform bdc_dynpro using 'SAPMM06E' '0101'.

perform bdc_field using 'BDC_CURSOR'

'EKKO-INCO2'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

**************************************************

*perform bdc_field using 'EKKO-EKGRP'

• IT_DATA-EKGRP1. "'SP3'.

*perform bdc_field using 'EKKO-PINCR'

• IT_DATA-PINCR. "'10'.

*perform bdc_field using 'EKKO-SPRAS'

• IT_DATA-SPRAS. "'EN'.

*perform bdc_field using 'EKKO-UPINC'

• IT_DATA-UPINC. "'1'.

*perform bdc_field using 'EKKO-ZTERM'

• IT_DATA-ZTERM.

*perform bdc_field using 'EKKO-WAERS'

• IT_DATA-WAERS. "'INR'.

*perform bdc_field using 'EKKO-ZBD1T'

• IT_DATA-ZBD1T. "'44'.

*

*perform bdc_field using 'EKKO-WKURS'

• IT_DATA-WKURS. "' 1.00000'.

*****************************************************

*perform bdc_field using 'EKKO-INCO1'

• IT_DATA-INCO1.

perform bdc_field using 'EKKO-INCO2'

IT_DATA-INCO2.

perform bdc_dynpro using 'SAPMM06E' '0120'.

perform bdc_field using 'BDC_CURSOR'

'EKPO-NETPR(01)'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

*perform bdc_field using 'EKPO-KNTTP(01)'

• 'N'.

perform bdc_field using 'EKPO-KNTTP(01)'

IT_DATA-KNTTP.

perform bdc_field using 'EKPO-EMATN(01)'

IT_DATA-EMATN.

perform bdc_field using 'EKPO-MENGE(01)'

IT_DATA-MENGE.

perform bdc_field using 'EKPO-NETPR(01)'

IT_DATA-NETPR.

perform bdc_dynpro using 'SAPMM06E' '0111'.

perform bdc_field using 'BDC_CURSOR'

'EKPO-MWSKZ'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

*perform bdc_field using 'EKPO-KNTTP'

• 'N'.

*perform bdc_field using 'EKPO-TXZ01'

• 'Clamps & Connector'.

*perform bdc_field using 'EKPO-MENGE'

• '4'.

*perform bdc_field using 'EKPO-SPINF'

• 'A'.

*perform bdc_field using 'EKPO-NETPR'

• '100.00'.

*perform bdc_field using 'EKPO-PEINH'

• '1'.

*perform bdc_field using 'EKPO-BPRME'

• 'NO'.

*perform bdc_field using 'EKPO-BPUMN'

• '1'.

*perform bdc_field using 'EKPO-BPUMZ'

• '1'.

*perform bdc_field using 'EKPO-PRSDR'

• 'X'.

*perform bdc_field using 'RM06E-EEIND'

• '24.01.2008'.

*perform bdc_field using 'RM06E-LPEIN'

• 'D'.

*perform bdc_field using 'EKPO-WEPOS'

• 'X'.

perform bdc_field using 'EKPO-MWSKZ'

IT_DATA-MWSKZ.

*perform bdc_field using 'EKPO-REPOS'

• 'X'.

perform bdc_dynpro using 'SAPMM06E' '0511'.

perform bdc_field using 'BDC_CURSOR'

'EKKN-SAKTO'.

perform bdc_field using 'BDC_OKCODE'

'=ENTE'.

*perform bdc_field using 'EKKN-SAKTO'

• '6034025'.

*perform bdc_field using 'DKACB-FMORE'

• 'X'.

perform bdc_dynpro using 'SAPLKACB' '0002'.

*perform bdc_field using 'BDC_CURSOR'

• 'COBL-VORNR'.

perform bdc_field using 'BDC_OKCODE'

'=ENTE'.

perform bdc_field using 'COBL-NPLNR'

IT_DATA-NPLNR.

perform bdc_field using 'COBL-VORNR'

IT_DATA-VORNR.

perform bdc_dynpro using 'SAPMM06E' '0111'.

perform bdc_dynpro using 'SAPMM06E' '0120'.

perform bdc_field using 'BDC_CURSOR'

'RM06E-EBELP'.

perform bdc_field using 'BDC_OKCODE'

'=BU'.

*perform bdc_field using 'RM06E-EBELP'

• '10'.

perform bdc_dynpro using 'SAPLSPO1' '0300'.

perform bdc_field using 'BDC_OKCODE'

'=YES'.

perform bdc_transaction using 'ME21'.

perform close_group.

LOOP AT T_MESSTAB WHERE REC_NO IS INITIAL.

AT FIRST.

V_MESSAGE_CNT = V_MESSAGE_CNT + 1.

T_MESSTAB-REC_NO = V_COUNT.

ENDAT.

MODIFY T_MESSTAB TRANSPORTING REC_NO.

ENDLOOP.

REFRESH T_BDCDATA.

CLEAR T_BDCDATA.

ENDLOOP.

SKIP.

WRITE : /10 'Record Number ', 30 'Error Message'.

SKIP.

endform.

&----

---

*& Form WRITE_ERROR

&----

---

• text

-

---

• --> p1 text

• <-- p2 text

-

---

FORM WRITE_ERROR.

LOOP AT T_MESSTAB.

WRITE : /10 T_MESSTAB-REC_NO , 30 T_MESSTAB-MESSAGE.

ENDLOOP.

ULINE /10(100).

WRITE : /10 'No of Records : ' , V_COUNT.

WRITE : /10 'No of Erroneous Records : ' , V_MESSAGE_CNT.

ULINE /10(100).

ENDFORM. " WRITE_ERROR

&----

---

*& Form CHECK_BDC

&----

---

• text

-

---

• --> p1 text

• <-- p2 text

-

---

FORM CHECK_BDC.

DATA: L_CHECK LIKE YMMT_CHECK_BDC-YCHECK.

SELECT SINGLE YCHECK INTO L_CHECK FROM YMMT_CHECK_BDC

WHERE PROGRAMM EQ SY-REPID

AND YCHECK EQ 'X'.

IF SY-SUBRC NE 0.

MESSAGE S000(YM) WITH 'Execution not possible'.

STOP.

ENDIF.

ENDFORM. " CHECK_BDC

*****************

Your Help will be highly awarded.

Please if you have any Bapi please send me.

[Former Member]

Hi,

PO creation can be done easily by BAPI: BAPI_PO_CREATE / BAPI_PO_CREATE1 which has good FM documentation.

Best Regards, Murugesh

[Former Member]

Hi Murugesh,

If you have code could you please send me

at mrl.sapabap@gmail.com

Your help will be highly awarded.

Thanks

Rahul

[Former Member]

For sample code check program: RBUS2102 for BAPI_PO_CREATE1 & BAPI_PO_CREATE.

and search forum by giving these BAPIs as key search words.

Hope this helps.

Best Regards, Murugesh