abt bdc

[Former Member]

Hi all

can any 1 tell me in which FM session is created and explain

[Former Member]

Hi

it will created in BDC_OPEN

in this FM only we use to give info abt the session

[Former Member]

Hi Neni,

BDC_OPEN_GROUP is the FM where its creates the batch input session.

which has got a parameter called KEEP = ' X ' - which keep the session in batch i/p without deleting...

Regards..

Balaji ( Assign points if its useful)

[Former Member]

check erpgenie.com

[Former Member]

hi,

BDC_OPEN_GROUP is used to open a session.

Whenever a session is opened u need to close it using BDC_CLOSW_GROUP.

U can insert data using BDC_INSERT.

These three are the function modules used to upload data using session method.

[Former Member]

Hi

The session is created in BDC_openGROUP.

The reords are insserted in bdc_insert.

and the session is closed in BDC_closegroup.

Regards abhi

[Former Member]

hi NENI,

BATCH DATA COMMUNICATION

About Data Transfer In R/3 System

When a company decides to implement the SAP R/3 to manage business-critical data, it usually does not start from a no-data situation. Normally, a SAP R/3 project comes into replace or complement existing application.

In the process of replacing current applications and transferring application data, two situations might occur:

• The first is when application data to be replaced is transferred at once, and only once.

• The second situation is to transfer data periodically from external systems to SAP and vice versa.

• There is a period of time when information has to be transferred from existing application, to SAP R/3, and often this process will be repetitive.

The SAP system offers two primary methods for transferring data into SAP systems. From non-SAP systems or legacy system. These two methods are collectively called “batch input” or “batch data communication”.

1. SESSION METHOD

2. CALL TRANSACTION

3. DIRECT INPUT

Advantages offered by BATCH INPUT method:

1. Can process large data volumes in batch.

2. Can be planned and submitted in the background.

3. No manual interaction is required when data is transferred.

4. Data integrity is maintained as whatever data is transferred to the table is through transaction. Hence batch input data is submitted to all the checks and validations.

To implement one of the supported data transfers, you must often write the program that exports the data from your non-SAP system. This program, known as a “data transfer” program must map the data from the external system into the data structure required by the SAP batch input program.

The batch input program must build all of the input to execute the SAP transaction.

Two main steps are required:

• To build an internal table containing every screen and every field to be filled in during the execution of an SAP transaction.

• To pass the table to SAP for processing.

Prerequisite for Data Transfer Program

Writing a Data Transfer Program involves following prerequisites:

Analyzing data from local file

Analyzing transaction

Analyzing transaction involves following steps:

• The transaction code, if you do not already know it.

• Which fields require input i.e., mandatory.

• Which fields can you allow to default to standard values.

• The names, types, and lengths of the fields that are used by a transaction.

• Screen number and Name of module pool program behind a particular transaction.

To analyze a transaction::

• Start the transaction by menu or by entering the transaction code in the command box.

(You can determine the transaction name by choosing System – Status.)

• Step through the transaction, entering the data will be required for processing your batch input data.

• On each screen, note the program name and screen (dynpro) number.

(dynpro = dyn + pro. Dyn = screen, pro = number)

• Display these by choosing System – Status. The relevant fields are Program (dynpro) and Dynpro number. If pop-up windows occur during execution, you can get the program name and screen number by pressing F1 on any field or button on the screen.

The technical info pop-up shows not only the field information but also the program and screen.

• For each field, check box, and radio button on each screen, press F1 (help) and then choose Technical Info.

Note the following information:

- The field name for batch input, which you’ll find in its own box.

- The length and data type of the field. You can display this information by double clicking on the Data Element field.

• Find out the identification code for each function (button or menu) that you must execute to process the batch-input data (or to go to new screen).

Place the cursor on the button or menu entry while holding down the left mouse button. Then press F1.

In the pop-up window that follows, choose Technical info and note the code that is shown in the Function field.

You can also run any function that is assigned to a function key by way of the function key number. To display the list of available function keys, click on the right mouse button. Note the key number that is assigned to the functions you want to run.

Once you have program name, screen number, field name (screen field name), you can start writing.

DATA TRANSFER program.

Declaring internal table

First Integral Table similar to structure like local file.

Declaring internal table like BDCDATA

The data from internal table is not transferred directly to database table, it has to go through transaction. You need to pass data to particular screen and to particular screen-field. Data is passed to transaction in particular format, hence there is a need for batch input structure.

The batch input structure stores the data that is to be entered into SAP system and the actions that are necessary to process the data. The batch input structure is used by all of the batch input methods. You can use the same structure for all types of batch input, regardless of whether you are creating a session in the batch input queue or using CALL TRANSACTION.

This structure is BDCDATA, which can contain the batch input data for only a single run of a transaction. The typical processing loop in a program is as follows:

• Create a BDCDATA structure

• Write the structure out to a session or process it with CALL TRANSACTION USING; and then

• Create a BDCDATA structure for the next transaction that is to be processed.

Within a BDCDATA structure, organize the data of screens in a transaction. Each screen that is processed in the course of a transaction must be identified with a BDCDATA record. This record uses the Program, Dynpro, and Dynbegin fields of the structure.

The screen identifier record is followed by a separate BDCDATA record for each value, to be entered into a field. These records use the FNAM and FVAL fields of the BDCDATA structure. Values to be entered in a field can be any of the following:

• Data that is entered into screen fields.

• Function codes that are entered into the command field. Such function codes execute functions in a transaction, such as Save or Enter.

The BDCDATA structure contains the following fields:

• PROGRAM: Name of module pool program associated with the screen. Set this field only for the first record for the screen.

• DYNPRO: Screen Number. Set this field only in the first record for the screen.

• DYNBEGIN: Indicates the first record for the screen. Set this field to X, only for the first record for the screen. (Reset to ‘ ‘ (blank) for all other records.)

• FNAM: Field Name. The FNAM field is not case-sensitive.

• FVAL: Value for the field named in FNAM. The FVAL field is case-sensitive. Values assigned to this field are always padded on the right, if they are less than 132 characters. Values must be in character format.

Transferring data from local file to internal table

Data is uploaded to internal table by UPLOAD of WS_UPLOAD function.

Population of BDCDATA

For each record of internal table, you need to populate Internal table, which is similar to BDCDATA structure.

All these five initial steps are necessary for any type of BDC interface.

DATA TRANSFER program can call SESSION METHOD or CALL TRANSACTION. The initial steps for both the methods are same.

First step for both the methods is to upload the data to internal table. From Internal Table, the data is transferred to database table by two ways i.e., Session method and Call transaction.

SESSION METHOD

About Session method

In this method you transfer data from internal table to database table through sessions.

In this method, an ABAP/4 program reads the external data that is to be entered in the SAP System and stores the data in session. A session stores the actions that are required to enter your data using normal SAP transaction i.e., Data is transferred to session which in turn transfers data to database table.

Session is intermediate step between internal table and database table. Data along with its action is stored in session i.e., data for screen fields, to which screen it is passed, the program name behind it, and how the next screen is processed.

When the program has finished generating the session, you can run the session to execute the SAP transactions in it. You can either explicitly start and monitor a session or have the session run in the background processing system.

Unless session is processed, the data is not transferred to database table.

BDC_OPEN_GROUP

You create the session through program by BDC_OPEN_GROUP function.

Parameters to this function are:

• User Name: User name

• Group: Name of the session

• Lock Date: The date on which you want to process the session.

• Keep: This parameter is passed as ‘X’ when you want to retain session after

processing it or ‘ ‘ to delete it after processing.

BDC_INSERT

This function creates the session & data is transferred to Session.

Parameters to this function are:

• Tcode: Transaction Name

• Dynprotab: BDC Data

BDC_CLOSE_GROUP

This function closes the BDC Group. No Parameters.

Some additional information for session processing

When the session is generated using the KEEP option within the BDC_OPEN_GROUP, the system always keeps the sessions in the queue, whether it has been processed successfully or not.

However, if the session is processed, you have to delete it manually. When session processing is completed successfully while KEEP option was not set, it will be removed automatically from the session queue. Log is not removed for that session.

If the batch-input session is terminated with errors, then it appears in the list of INCORRECT session and it can be processed again. To correct incorrect session, you can analyze the session. The Analysis function allows to determine which screen and value has produced the error. If you find small errors in data, you can correct them interactively, otherwise you need to modify batch input program, which has generated the session or many times even the data file.

PS:Please reward if helpful.

Thanks,

chandra.

[Former Member]

HI.

Refer this .

Use multiple 'BDC_INSERT' FM call within one 'BDC_OPEN_GROUP' FM call and 'BDC_CLOSE_GROUP' FM call. Recording will be different for each BDC_INSERT.

Ex:

CALL FUNCTION 'BDC_OPEN_GROUP'

EXPORTING

client = sy-mandt

group = session_name

keep = p_keep

user = sy-uname

CALL FUNCTION 'BDC_INSERT'

EXPORTING

tcode = ‘MM01'

TABLES

dynprotab = i_bdcdata

EXCEPTIONS

…..

CALL FUNCTION 'BDC_INSERT'

EXPORTING

tcode = ‘MM02'

TABLES

dynprotab = i_bdcdata1

EXCEPTIONS

…..

CALL FUNCTION 'BDC_CLOSE_GROUP'

Reward all helpfull answers.

Regards.

Jay

[Former Member]

hi,

Use the BDC_OPEN_GROUP function module to create a new session.

You cannot reopen a session that already exits and has been closed. If you call BDC_OPEN_GROUP with the name of an existing session, then an additional session with the same name is created.

A batch input program may have only one session open at a time. Before opening a session, make sure that any sessions that program closes any sessions that it previously had opened.

Use the BDC_CLOSE_GROUP function module to close a session after you have inserted all of your batch input data into it. Once a session is closed, it can be processed.

Regards,

Aparna