Error Upgrade Phase MAIN_SHDRUN/RUN_RSPTBFIL_INISHD

[former_member287614]

Hello guys !!!

I´m running the Upgrade ERP EHP5 to EHP7 with the SUM 1.0 SP14 (SUM10SP14_4-20006676.SAR)

I have error in the phase MAIN_SHDRUN/RUN_RSPTBFIL_INISHD

Last error code set: Single errors (code <= 😎 found in logfile 'RSPTBSHDIN_PH.ELG'

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PUTTB_SHD destination filling ERRORS and RETURN CODE in RSPTBSHDIN.<SID>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4 ETG011 "[VIEW_DESTINFO]""WDRV_ADP_PROPMP ->""DEST T/F =""J/T"
4 ETG011 "[VIEW_DESTINFO]""WDRV_ADP_UCAMP ->""DEST T/F =""J/T"
4 ETG011 "[VIEW_DESTINFO]""WDR_TEST_SFBOOKV ->""DEST T/F =""J/T"
4 ETG011 "[VIEW_DESTINFO]""WDY_VD_UI_ELEM_V ->""DEST T/F =""J/T"
4 ETG011 "[VIEW_DESTINFO]""ZUSV ->""DEST T/F =""J/T"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""PPHMRPLOG_PP_ST"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""PPHMRPLOG_STAT"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""PPHMRPLOG_SUM_I"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""PPHMRP_PERF"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""PPHMRP_PERFITEM"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_MRP_ACCSHORTEX"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_MRP_CHECK_BUF"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_MRP_PURCH_DOC"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_MRP_RESERV"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_MRP_SCHEDAGRMT"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_MRP_SDIVTOTALS"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_MRP_SUPPLIERS"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_EBAN"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_EBKN"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MARD"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MDBS_SL"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MDLA_1"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MDPB"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MDQM"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MDRELA"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MDRELA_1"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MDUA"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MDUR"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MRBED"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MRBED_1"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MSKA"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MSPR"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MSSA"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MSSL"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_MSSQ"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_PLAF_PW"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_PLAF_RG"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_PLAF_UL"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_PROW"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_RESB_AGG"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_RESB_AGG_1"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_RESB_AGG_2"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_RESB_FLEX"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_VBBE"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_PPH_VBBE_AGG"
2EETG011 "[VIEW_DESTINFO] Error retrieving nametab""V_VBBE_AGG_1"

When i enter the shadow instance in check the SE14 the view does not exist in the database, when i create in database give me an error with all views.

I´m search oss notes but I can not find.

Regards.

Desirée C.

RSPTBSHDIN_PH.txt.zip

[former_member189797 · Accepted solution]

Hi Desiree,

This kind of issue generally occurs if errors in ACT_UPG are ignored or not handled properly.
Could you let me know if you had faced the issue in ACT_UPG ? How were they handled ?
I am mainly concerned about the errors with DDL sources .

Thank you.

Best Regards,
Gaurav

[former_member287614 · Accepted solution]

Hello Gaurav

Certainly I had problems in the ACT_UPG phase with the following messages:

To resolve the error run the program following a forum RUTDDLSACT I found: https://scn.sap.com/thread/3830244

The errors messages for phase ACT_UPG:

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_AFPO"
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_AFPO_1" existiert nicht oder ist nicht aktiv.
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_AFPO_1" existiert nicht oder ist nicht aktiv.
 

A3 DDDLS 027XDdl Source "PPH_DDL_AFPO" konnte nicht aktiviert werden
1EEDO519X"Ddl Source" "PPH_DDL_AFPO" could not be activated

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_AFPO_1"
   A1EDSDDL_PARSER_MSG 010 Die Spalte "SGT_SCAT" ist nicht bekannt.
   A3 DDDLS 027XDdl Source "PPH_DDL_AFPO_1" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_AFPO_1" could not be activated

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_AFPO_PW"
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_AFPO_1" existiert nicht oder ist nicht aktiv.
   A3 DDDLS 027XDdl Source "PPH_DDL_AFPO_PW" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_AFPO_PW" could not be activated

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_AFPO_RG"
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_AFPO_1" existiert nicht oder ist nicht aktiv.
   A3 DDDLS 027XDdl Source "PPH_DDL_AFPO_RG" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_AFPO_RG" could not be activated

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_MDBS"
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_MDBS_4" existiert nicht oder ist nicht aktiv.
   A3 DDDLS 027XDdl Source "PPH_DDL_MDBS" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_MDBS" could not be activated

   A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_MDBS_1"
   A1EDSDDL_PARSER_MSG 010 Die Spalte "SGT_SCAT" ist nicht bekannt.
 

A3 DDDLS 027XDdl Source "PPH_DDL_MDBS_1" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_MDBS_1" could not be activated

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_MDBS_2"
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_MDBS_1" existiert nicht oder ist nicht aktiv.
 

A3 DDDLS 027XDdl Source "PPH_DDL_MDBS_2" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_MDBS_2" could not be activated

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_MDBS_3"
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_MDBS_2" existiert nicht oder ist nicht aktiv.
 

A3 DDDLS 027XDdl Source "PPH_DDL_MDBS_3" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_MDBS_3" could not be activated

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_MDBS_4"
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_MDBS_3" existiert nicht oder ist nicht aktiv.
 

A3 DDDLS 027XDdl Source "PPH_DDL_MDBS_4" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_MDBS_4" could not be activated

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_MDUB"
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_MDUB_2" existiert nicht oder ist nicht aktiv.
 

A3 DDDLS 027XDdl Source "PPH_DDL_MDUB" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_MDUB" could not be activated

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_MDUB_1"
   A1EDSDDL_PARSER_MSG 010 Die Spalte "SGT_SCAT" ist nicht bekannt.
   A1EDSDDL_PARSER_MSG 010 Die Spalte "SGT_RCAT" ist nicht bekannt.
 

A3 DDDLS 027XDdl Source "PPH_DDL_MDUB_1" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_MDUB_1" could not be activated

A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_MDUB_2"
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_MDUB_1" existiert nicht oder ist nicht aktiv.
 

A3 DDDLS 027XDdl Source "PPH_DDL_MDUB_2" konnte nicht aktiviert werden
   A3 DDDLS 030XAktiviere Ddl Source "PPH_DDL_MDUB_2"
   A1EDSDDL_PARSER_MSG 004 Das Basisobjekt "PPH_E_MDUB_1" existiert nicht oder ist nicht aktiv.
 

A3 DDDLS 027XDdl Source "PPH_DDL_MDUB_2" konnte nicht aktiviert werden
1EEDO519 "Ddl Source" "PPH_DDL_MDUB_2" could not be activated
1 ETP111 exit code           : "8"

Regards.

Desirée

[former_member189797 · Accepted solution]

Hi Desiree,

I am sorry for the bad news but this report should not be used in shadow instance.
Usage of this report are documented in Note 2023690.

This report activated the objects in online mode which is not same as how upgrade tool activated the objects in ACT_UPG in shadow. You should follow the Note 2086899 and use the report attached in Note to activate the DDL sourced mentioned above. This report was specially written for ACT_UPG phase .

At this point, I can only suggest to try activating the DDL objects mentioned in ACT_UPG again with report in Note 2086899 and repeat the phase. But in case this do not work then you would need to reset the upgrade and then start the upgrade again. In case you face the same issue then please
use the report from 2086899 to activate the objects .

Thank you.

Best Regards,
Gaurav

[former_member287614 · Accepted solution]

Hello

When i apply the OSS Note 2086899 in the source system give me error: "The Dictionary structure or table "DDLDEPENDENCY" not exist", the table not exist in the source system. Only exists in the shadow instance the table DDLDEPENDENCY

Even views (DDLS) showing errors in the log does not exist in the source system.

I'm confused on how to apply this note.

Regards.

[former_member189797 · Accepted solution]

Hi Desiree,

Offcourse because this was written for shadow instance. I had written that other report which you used should not be used in shadow instance. But this should be used in shadow to activate the objects.

Reagrds,
Gaurav

[former_member287614 · Accepted solution]

Hello Gaurav thanks for replay

In the shadow instance the program RUTDDLSACT already exists but the code is different. When I try to change the program shows me the user DDIC "User DDIC May not Make Changes in customer systems"

Sorry this is my first Upgrade to EHP, I can enter to modify the program to another account?

Regards.

[former_member189797 · Accepted solution]

Hi Desiree,

I would recommed to please follow the Note. Note do not suggest to change the report
but create the Z report which is attached in the Note.

Best Regards,
Gaurav

[former_member189797 · Accepted solution]

Also , DDIC cannot make changes in the system so you need to use a user other than DDIC. May be you can use the user which you used to perform the SPDD or ask the admin to create a user for you in shadow so you could continue .

BR,
Gaurav

[former_member287614 · Accepted solution]

Thanks Gaurav.

The problem is I can not log in with a different account because the system throws me an error: Upgrade still running: Logon not posible

It seems that I have to start o reset the upgrade

Regards.

Desiree

[former_member189797 · Accepted solution]

You can unlock the shadow instance. Commands should be available in SUM guide as well as there is a KBA also for this... found it 2048823...Once done with changes , lock the system back and then repeat the phase.

Reagrds,
Gaurav

[former_member189797 · Accepted solution]

Hi Desiree,

Since you mentioned that this is your first upgrade . I highly recommend the openSAP course on upgrade. I had the link but not able to paste it here. seems some issue with editor.

How to find the course. Just search google as mentioned below and see first result.

Regards,
Gaurav

[former_member189797 · Accepted solution]

Hi Desiree,

Was you able to continue ?

Regards,
Gaurav

[former_member287614 · Accepted solution]

Hello Gaurav

Sorry for delay, the process continue without problem. In this moment the process is there in step "proccessing" phase MAIN/SHDIMP/SUBMOD_SHDIMP/SHADOW_IMPORT_INC

I thank you for your great help it has been invaluable

I will take into account its recommendation for the courses of upgrade.

I will notify you when the upgrade successfully completed.

Regards.

Desirée

[former_member189797 · Accepted solution]

Hi Desiree,

Glad to know that I could help.

I could see that you had created a incident for the same issue. It can be closed now.
Also do try the course I suggested. It should help you a lot with your upgrade.

Best of luck.

Best Regards,
Gaurav Pandey
SAP Product Support

[fabricepolegato · Accepted solution]

Thanks Gaurav,

I had exactly the same issue and now it's solve.

Solution very well explained

Regards

Fabrice

[former_member189797 · Accepted solution]

Hi Fabrice,

Good to know that it is still helping community.

Regards,
Gaurav