on 05-23-2006 7:18 PM
Hi Experts:
I really hope that you can help me out with this.
We had/have a CRM 5.0 system, we changed its IP from Dynamic to Static (that went fine). We rebooted the system up (that also went fine)
The next morning we noticed that some of the processes were showing red (in SAP MMC). We waited on that hoping that it would resolve it self.
HOwever, till early evening, the system was still showing red processes. So, we decided to reboot the system up. HOwever, the dispatcher is not starting up. Essentially none of the java applications (SDM, Dispatcher, and Server) are starting up.
I have opened up a ticket with SAP, and they beleive that the issue is with Oracle Listener as that is refusing to recognize the SID from our SAP system.
Since then I have turned off the static IP and tried restarting the CI, but still it continues to give the same error.
During the Disp+Work.exe start up protocol...it continues to show "J2EE status info unavailable".
Have any of you encountered something like this in regards to NetWeaver 2004s or anyother SAP application.
Any help would be appreciated.....
Imran
There could be a few different issues that are causing the problem. The old IP address might still reside in the resolver cache. Open up a command propmt and type in: ipconfig -flushdns and try to restart the instance. If the instance still does not restart, post the trace file. In the MMC, right click on the red process and select Developer Trace.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI Shaun:
Thanks for all your help.
Hopefully SAP will have a solution.
Thanks for all your help with this.
I really appreciate it.
Imran
PS Sorry for the last "type o" with your name.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Hi Paritosh:
Usually, it is not suppose to give you any problems after an IP change. Ours was giving us problems because another member of our group had installed another SAP product on the server, and listener was pointing towards this new product. So, i suggest that you look at tnsnames.ora and listener.ora files, make sure that they ar pointing towards the correct DB.
Also, monitor the start up process to see where is it that it exactly decides to stop. That could provide you with a clue as to what the issue is.
Also have a look at the host file.
"C:\WINDOWS\system32\drivers\etc\hosts file"
Hostname & domain name together is the FQDN (fully qualified domain name) Name
I hope this helps you out.
Ok, sounds like you are in good hands now. I have an inkling that during the install it converted the hostname to a IP address and stored it somewhere in the properties files. Now that you changed the IP it can not find the DB. If you know the old IP address you might want to try to search the file contents for the address.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI Sean:
That seems to be in line with what SAP is saying. Essentially, they have said that the Oracle Listener is not recoginizing the SID of the SAP system. I have a note open with them, hopefully they'll have a solution.
WE installed the CRM on Oracle 10g.
CRM is running the latest SP level (I think 6 or 7). But i finished updating that on May 12th.
It is based on NW2004s architecture kernel release 700.
It uses both AS-ABAP and AS-JAVA. We also installed EP 7.0 as well so we could integrate both CRM and 7.0 as well.
We are actually a ramp up partner for CRM 5.0 So, thats how we got our hands on it.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
It looks like the J2EE is having a problem connecting to the DB. What are the specifics of the installation CRM 5.0 SPx? Also, what DB and DB version are you utilizing.
BTW, how did you get CRM 5.0 before the rest of us?
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Database Error Log Details:
#1.5#0014C25BD5C200200000001900000838000414158D4FFE4F#1147982704552#/System/Database/sql/jdbc/direct##com.sap.sql.jdbc.direct.DirectConnection#######Thread[Thread-25,5,main]##0#0#Error#1#com.sap.sql.jdbc.direct.DirectConnection#Java#com.sap.sql_0003#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection TWATSCRM1001:crm:SAPSR3DB: code=17,002, state="null", message="Io exception: Connection reset by peer: socket write error";
SQL statement is "ROLLBACK".#5#17002#<null>#Io exception: Connection reset by peer: socket write error#TWATSCRM1001:crm:SAPSR3DB#ROLLBACK#
#1.5#0014C25BD5C200200000001B00000838000414158D500432#1147982704552#/System/Database/sql/jdbc/direct##com.sap.sql.jdbc.direct.DirectConnection#######Thread[Thread-25,5,main]##0#0#Error#1#com.sap.sql.jdbc.direct.DirectConnection#Java#com.sap.sql_0003#com.sap.sql.log.OpenSQLResourceBundle#SQL error occurred on connection TWATSCRM1001:crm:SAPSR3DB: code=17,008, state="null", message="Closed Connection";
SQL statement is "ROLLBACK".#5#17008#<null>#Closed Connection#TWATSCRM1001:crm:SAPSR3DB#ROLLBACK#
#1.5#0014C25BD5C2000000000012000009EC000414159C4A56A5#1147982955818#/System/Database/sql/trace##com.sap.sql.trace.SQLTrace#######Thread[Thread-1,5,main]##0#0#Info#1#com.sap.sql.trace.SQLTrace#Java#com.sap.sql.trace_1602#com.sap.sql.log.OpenSQLResourceBundle#SQLTrace: Using implementation .#1#MIXED# Server Log Details: #1.5#0014C25BD5C2001C0000001B000009EC00041429222FD7F3#1148066806630#/System/Server##com.sap.engine.core.locking.AbstractLockingManagerImpl.shutDown(properties)#######Thread[Thread-24,5,main]##0#0#Info#1#com.sap.engine.core.locking.AbstractLockingManagerImpl#Java### stopped successfully#1#LockingManager#
#1.5#0014C25BD5C2001E00000000000009EC00041429225DA168#1148066809630#/System/Server##com.sap.engine.core.cluster.impl6.ms.MSListenerQueue.run()#######SAP J2EE Engine|MS Queue Listener##0#0#Info#1#com.sap.engine.core.cluster.impl6.ms.MSListenerQueue#Plain###MSLib: Received error command to stop listener queue.#
#1.5#0014C25BD5C2001F00000000000009EC00041429225DA3F6#1148066809630#/System/Server##com.sap.engine.core.thread.impl6.SingleThread.SingleThread.run().Interrupted#######OrderedChannel for service##0#0#Warning#1#com.sap.engine.core.thread.impl6.SingleThread#Plain###Thread interrupted while waiting for new task to process. Probably the system is shutting down. null#
Security Log Details:
#1.5#0014C25BD5C2001C0000000D00000F980004127E3F4684CC#1146233343599#/System/Security##com.sap.engine.services.keystore#######Timeout Service Synchronous Internal Thread##0#0#Error#1#com.sap.engine.services.keystore#Java###Source: com.sap.engine.frame.core.configuration.NameNotFoundException: A file entry with the name "ssl-credentials" cannot be found in the configuration "keystore/TrustedCAs/entries".; Description: EntriesStorage - readEntry(ssl-credentials) in configuration [keystore/TrustedCAs/entries] failed with unexpected exception; Consequences: ; Countermeasures:check log for details##
#1.5#0014C25BD5C2001C0000001000000F980004127E3F469E33#1146233343615#/System/Security##com.sap.engine.services.keystore#######Timeout Service Synchronous Internal Thread##0#0#Error#1#com.sap.engine.services.keystore#Java###Source: com.sap.engine.frame.core.configuration.NameNotFoundException: A file entry with the name "ssl-credentials" cannot be found in the configuration "keystore/TrustedCAs/entries".; Description: EntriesStorage - readEntry(ssl-credentials) in configuration [keystore/TrustedCAs/entries] failed with unexpected exception; Consequences: ; Countermeasures:check log for details##
Network Log Details:
#1.5#0014C25BD5C2000800000001000009EC00041429222F14DB#1148066806583#/System/Network##com.sap.engine.core.port.impl0.PortsManagerImpl#######SAPEngine_System_Thread[impl:6]_17##0#0#Info#1#com.sap.engine.core.port.impl0.PortsManagerImpl#Java###Protocol is no longer managed.#1#httptunneling#
#1.5#0014C25BD5C2001200000001000009EC00041429225DCA01#1148066809630#/System/Network##com.sap.engine.core.manipulator.TCPRunnableConnection.disposeConnection()#######SAPEngine_System_Thread[impl:6]_25##0#0#Error#1#/System/Network#Plain###Cannot dispose connection.#
Thanks Again.....I really appreciate your help with this.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
Sorry, I did not include the path.
<Drive>\usr\sap\XIT\DVEBMGS00\j2ee\cluster\dispatcher\log\system
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
In the following file directory you will find some trace files. Look through them and post a few errors (don't post the whole file as it can be quite long). Also, does your system have multiple NIC's? Run a ipconfig /all.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI Shaun:
I have tried what you had suggested, but still no luck.
J2EE table is still empty and is not loading up any of the three applications. It also continues to say "J2EE status info unavailable"
I tried the ipconfig command and the restart of various Oracle and SAP related services, but still no luck.
Imran
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
I had a error similar to this a couple of time and what it turns out to be is that one or all of the services get into a inconsistant state. So try this
1) Stop the CRM instance
2) Go to Start >> All Program >> Adminsitrative Tools >> Services.
3) Restart each of the services: SAPOSCOL, SAPCRM_00, SAPCRM_01 (SAPCRM_xx might differ on your system)
4) Now start up the CRM instance
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
HI Shaun:
Thanks for your reply, however it is still giving the same error. As requested I am attaching the trace file:
Again..I really appreciate this.
-
trc file: "dev_disp", trc level: 1, release: "700"
-
sysno 02
sid CRM
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 48
intno 20050900
make: multithreaded, Unicode, optimized
pid 2584
Tue May 23 14:32:51 2006
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 2584) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 48 successfully loaded
shared lib "dw_xtc.dll" version 48 successfully loaded
shared lib "dw_stl.dll" version 48 successfully loaded
shared lib "dw_gui.dll" version 48 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3902
Tue May 23 14:32:56 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is active
DpIPCInit2: start server >TWATSCRM1001_CRM_02 <
DpShMCreate: sizeof(wp_adm) 14080 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=2000/8/160056/160064
DpShMCreate: sizeof(file_adm) 160064 (72)
DpShMCreate: sizeof(vmc_adm) 14520 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05EF0040, size: 4783504)
DpShMCreate: allocated sys_adm at 05EF0040
DpShMCreate: allocated wp_adm at 05EF1E28
DpShMCreate: allocated tm_adm_list at 05EF5528
DpShMCreate: allocated tm_adm at 05EF5558
DpShMCreate: allocated wp_ca_adm at 062BAAF0
DpShMCreate: allocated appc_ca_adm at 062C08B0
DpShMCreate: allocated comm_adm at 062C27F0
DpShMCreate: allocated file_adm at 063436B0
DpShMCreate: allocated vmc_adm_list at 0636A7F0
DpShMCreate: allocated gw_adm at 0636A830
DpShMCreate: allocated vmc_adm at 0636A860
DpShMCreate: allocated ca_info at 0636E118
DpShMCreate: allocated wall_adm at 0636E120
MBUF state OFF
DpSesCreateTable: created session table at 063F0040 (len=138424)
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3192
argv[0] = D:\usr\sap\CRM\DVEBMGS02\exe\jcontrol.EXE
argv[1] = D:\usr\sap\CRM\DVEBMGS02\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\CRM\SYS\profile\CRM_DVEBMGS02_TWATSCRM1001
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=3927
argv[5] = -DSAPSYSTEM=02
argv[6] = -DSAPSYSTEMNAME=CRM
argv[7] = -DSAPMYNAME=TWATSCRM1001_CRM_02
argv[8] = -DSAPPROFILE=D:\usr\sap\CRM\SYS\profile\CRM_DVEBMGS02_TWATSCRM1001
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0K=> DpMsAttach, mscon ( TWATSCRM1001) [dpxxdisp.c 11349]
DpStartStopMsg: send start message (myname is >TWATSCRM1001_CRM_02 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 48
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Tue May 23 14:33:00 2006
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1412
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:3929) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3192)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Tue May 23 14:33:36 2006
ERROR => W0 (pid 1088) died [dpxxdisp.c 13947]
ERROR => W1 (pid 3392) died [dpxxdisp.c 13947]
ERROR => W2 (pid 3560) died [dpxxdisp.c 13947]
ERROR => W3 (pid 3460) died [dpxxdisp.c 13947]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 3972) died [dpxxdisp.c 13947]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 1052) died [dpxxdisp.c 13947]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 2608) died [dpxxdisp.c 13947]
ERROR => W7 (pid 3636) died [dpxxdisp.c 13947]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W8 (pid 424) died [dpxxdisp.c 13947]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W9 (pid 3356) died [dpxxdisp.c 13947]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:46 2006
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue May 23 18:33:46 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
-
0 DIA 1088 Ended no 1 0 0
1 DIA 3392 Ended no 1 0 0
2 DIA 3560 Ended no 1 0 0
3 DIA 3460 Ended no 1 0 0
4 UPD 3972 Ended no 1 0 0
5 ENQ 1052 Ended no 1 0 0
6 BTC 2608 Ended no 1 0 0
7 BTC 3636 Ended no 1 0 0
8 SPO 424 Ended no 1 0 0
9 UP2 3356 Ended no 1 0 0
Dispatcher Queue Statistics Tue May 23 18:33:46 2006
===========================
--------
+
Typ | now | high | max | writes | reads |
--------
+
NOWP | 0 | 2 | 2000 | 6 | 6 |
--------
+
DIA | 6 | 6 | 2000 | 6 | 0 |
--------
+
UPD | 0 | 0 | 2000 | 0 | 0 |
--------
+
ENQ | 0 | 0 | 2000 | 0 | 0 |
--------
+
BTC | 0 | 0 | 2000 | 0 | 0 |
--------
+
SPO | 0 | 0 | 2000 | 0 | 0 |
--------
+
UP2 | 0 | 0 | 2000 | 0 | 0 |
--------
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Tue May 23 18:33:46 2006
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue May 23 18:33:46 2006
=============================
Slots: 300, Used: 1, Max: 0
--------
+
id | owner | pid | eyecatcher |
--------
+
0 | DISPATCHER | -1 | WPCAAD000 |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:51 2006
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >TWATSCRM1001_CRM_02 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2340) (SOFT_KILL)
Stop icman
killing process (3380) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2340 HANDLE:1496)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:52 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2340 HANDLE:1496)
wait for end of icman
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:53 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:54 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:55 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:56 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:57 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:58 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:33:59 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:34:00 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:34:01 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:34:02 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:3380 HANDLE:1504)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1525
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue May 23 14:34:03 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3380 HANDLE:1504)
[DpProcDied] Process died (PID:3192 HANDLE:1480)
DpStartStopMsg: send stop message (myname is >TWATSCRM1001_CRM_02 <)
NiIMyHostName: hostname = 'TWATSCRM1001'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11633]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1436 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1436 (pos=3)
SiSelNRemove: removed sock 1436
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/10
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1436
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Em2Cleanup: Cleanup EM2
Eg2Cleanup: Cleanup EG2
Es2Cleanup: Cleanup ES2
Es2ResLocSlotClear: clear slot 0
Es2ResLocSlotClear: clear slot 0
Es2ResLocSlotClear: clear slot 0
Es2ResLocSlotClear: clear slot 0
***LOG Q05=> DpHalt, DPStop ( 2584) [dpxxdisp.c 10022]
Good Bye .....
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.
User | Count |
---|---|
3 | |
1 | |
1 | |
1 | |
1 | |
1 | |
1 | |
1 | |
1 | |
1 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.