Solution Manager 7.2 - Installation and Configurat...

yakcinar · ‎02-16-2016

Part 7: Solution Manager 7.2 - Installation and Configuration - VII - Managed System Config - Busines Object...

Part 8: Solution Manager 7.2 - Installation and Configuration - VIII - Managed System Config - Java System

Solution Manager 7.2 is already in Ramp-Up.

I watched the video of the chearful team of Solution Manager 7.2.

As System Administrators we willl also be installing and configuring Solution Manager 7.2 from now on.

So I decided to install it on premise.

Cloud version of Solution Manager 7.2 is also available on SAP Cloud Appliance Library https://cal.sap.com/

(SAP Solution Manager 7.2 SPS01 on SAP HANA for Content Activation Evaluation of a Customer's Own Documentation)

I am going to try to write some series of blogs on Solution Manager 7.2 in terms of System Administration.

They will be about installations, configurations, changes and managed system configurations.

Below you can find the installation specific part of this series of blogs.

Preperation Steps

Since Solution Manager 7.2 is in Ramp-Up yet you need to apply for this. You can find detailed info about Ramp-Up in links Demystifying SAP's Ramp-Up process and SAP Ramp-Up

Prepare a system for installation. If possible find a system that you could install SM 7.2 on HANA DB. Unfortunately I did not have chance to use HANA DB. I installed my system on SQL Server 2012. My system is a virtual system with 4 vCPU and 32 GB of RAM and enough disks.

Download DVDs

Obtain Master Guide and Installation Guides

Read SAP Notes about Solution Manager 7.2

Preperatory Steps on the system
- Turn Off UAC
- Turn off Automatic Updates
- Turn off Windows Firewall
- Turn off IE ESC
- Timezone Settings
- Regional Settings
- Configure Hostname
- Configure Page File Size
- Configure DEP
- Configure Folder Options
- Configure Start Menu
- Configure Command Prompt
- Activate Telnet Client
- Install Notepad++

After preperation steps I followed the Implementation sequence from Master Guide in below order.

Master Guide

For information on the installation of SAP Solution Manager go to link SYSTEM PROVISIONING - SAP SOLUTION MANAGER 7.2 SPS 01 BASED ON SAP NETWEAVER 7.4 ABAP +JAVA (from master Guide: see service.sap.com/instguides --> SAP ComponentsSAP Solution ManagerRelease 7.2 --> InstallationSystem Provisioning for SAP Solution Manager 7.2)

From PAM page you can go below links about Solution Manager 7.2

SAP Road Map

Product Homepage

Master Guide

Installation / Upgrade Guide

SAP Help Portal

Release Notes

Release Restrictions Note

Additional Release Information

SAP Community Network

Installation and Configuration

The installation of SAP Solution Manager 7.2 SP01 needs to be run in the following way:

1. Instal DB Software (Microsoft SQL Server 2012)

Installed DB Software Microsoft SQL Server 2012 SP1 and then updated to SP2. (Upgrade to and Installation of SQL Server 2012 in an SAP Environment)

2. Install the SAP Solution Manager 7.2 SP01 ABAP system with SWPM and the resulting stack.xml.

Followed below Guide for installing ABAP part of the system.

Installation of SAP Systems Based on SAP NetWeaver 7.1 to 7.5 Using Software Provisioning Manager 1....

SID	SMA
Instance Numbers	00, 01

Post Installation Steps for ABAP:

- Logon to System
- Perform the automated initial setup
- Install the SAP license
- Perform the consistency check
- Configure the Transport Management System
- You perform post-installation steps for the application server ABAP
  - Upload and set system profiles using transaction RZ10

Configure your Solution Manager 7.2 profile parameters according to the note

2048519 - Profile parameters for SAP Solution Manager 7.2

- - Create logon and RFC server groups using transactions SMLG and RZ12
  - Create operation modes using transaction RZ04
  - Schedule standard jobs using transaction SM36
  - Configuration of SLD data supplier using transaction RZ70 (After installation of Java and configuration of SLD)
  - Perform load generation using transaction SGEN
- If required, you install additional languages and perform language transport
- SAP Kernel Release 7.40 and Higher: You perform IP Multicast Configuration
- You configure the user management
- You ensure user security
- If required, you perform the client copy
- SAP systems based on SAP NetWeaver 7.40 and higher only: If required, you change the keys for the secure storage
- You apply the latest kernel and Support Packages

You run Maintenance Planner instead of Maintenance Optimizer transaction using the link Maintenance Planner for applying SP Stack 01. You can have detailed information about planner using Maintenance Tools: Maintenance Planner and Maintenance Optimizer

These are the screenshots from maintenance planner. You can download stack.xml file on download files tab of the application.

You get stack.xml file and download Support Packages

Before applying the stack you should check below notes and according to directions you need to apply some of them before, some of them during update and some of the others after SUM update.

I advise you to read the notes carefully because this can effect the update and later configurations.

2084104 - Central Note - Software Update Manager 1.0 SP14 [lmt_005]

1595736 - Solution Manager: Overview on Release Information Notes

2229953 - Solution Manager 7.2 SP Stack 01S0014395147: recommended corrections

1668882 - Note Assistant: Important notes for SAP_BASIS 730,731,740

2248091 - Change to reimplementation handling

2087917 - SAP Solution Manager 7.20 SP1 - Basic functions

2216794 - ABAP Download Service: Correction of Transformation

2166856 - API roles: Maintenance of organizational levels

2189071 - DGP: Improved clean up for waiting export entries

1472465 - SAP Solution Manager 7.1 and 7.2 - System Landscape Setup Guide

2154957 - Unified Rendering for SAP_UI 740

You download SUM also to update the ABAP system and run the tool. You can see some screenshots from the tool below.

You can see initial and target stack SP versions and levels in below report of SUM.

- You perform a full system backup

3. Install the SAP Solution Manager 7.2 SP01 Java system with SWPM from the Java DVD.

Followed below Guide for installing Java part of the system.

Installation of SAP Systems Based on SAP NetWeaver 7.1 to 7.5 Using Software Provisioning Manager 1....

SID	SMJ
Instance Numbers	02, 03

Post Installation Steps for Java:

- You check whether you can log on to the application server
- You provide access to the NetWeaver Administrator
- You install the SAP license
- You apply the latest kernel and Support Packages
  - You apply Kernel Patch
  - For Java components' patches apply the recommendations in note 2229953 - Solution Manager 7.2 SP Stack 01S0014395147: recommended corrections.

Java component patches shall be downloaded from the Support Portal at https://support.sap.com/swdc -> Software Download -> Support Packages and Patches -> Browse Our Download Catalog -> SAP Technology Components -> SAP Solution Manager -> SAP Solution Manager 7.2 -> Solution Manager JAVA Stack. After download, place the files corresponding to the below software component list, in a preferred folder in order to implement the patches. See the SUM guide for further details (see link above, 'Chapter: 7 Applying Single Component Updates and Patches Using a Manually Prepared Directory').

- - - J2EE ENGINE SERVERCORE 7.40 -> OS independent: Patch 20 (or higher) for J2EE ENGINE SERVERCORE 7.40 SP 11
    - J2EE ENGINE LM-CORE 7.40 -> OS independent: Patch 5 (or higher) for J2EE ENGINE LM-CORE 7.40 SP 11
    - J2EE ENGINE CORE TOOLS -> OS independent: Patch 1 (or higher) for J2EE ENGINE CORE TOOLS SP 11
    - J2EE ENGINE APPLICATIONS -> OS independent: Patch 4 (or higher) for J2EE ENGINE APPLICATIONS SP 11
    - J2EE ENGINE FRAMEWORK 7.40 -> OS independent: Patch 6 (or higher) for J2EE ENGINE FRAMEWORK 7.40 SP 11
    - J2EE ENGINE FACADE 7.40 -> OS independent: Patch 1 (or higher) for J2EE ENGINE FACADE 7.40 SP 11
    - LMNWABASICCOMP 7.40 -> OS independent: Patch 1 (or higher) for LMNWABASICCOMP 7.40 SP 11
    - ENGINEAPI 7.40 -> OS independent: Patch 6 (or higher) for ENGINEAPI 7.40 SP 11
    - LM NWA BASIC APPS 7.40 -> OS independent: Patch 4 (or higher) for LM NWA BASIC APPS 7.40 SP 11
    - UME ADMINISTRATION 7.40 -> OS independent: Patch 6 (or higher) for UME ADMINISTRATION 7.40 SP 11
    - LM CONFIGURATION WIZARD 7.40 -> OS independent: Patch 1 (or higher) for LM CONFIGURATION WIZARD 7.40 SP 11
    - In case you do operate Introscope 9.5 (and not yet 9.7):
      WILY INTRO AGT 9.5 MIN J5VIASM -> OS independent: Patch 1 (or higher) for WILY INTRO AGT 9.5 MIN J5VIASM SP 06

Use SUM and apply the patches like below.

- You configure the user management
- You ensure user security
- You run automated configuration
  - SLD Configuration

Use http://<hostname>:<port>/sld/fun and enable SLD automatically.

- - Update CR Content to the currnet using the Note 669669 - Update of SAP System Component Repository in SLD

- You perform a full system backup

And this is the end of the installation phases of Solution Manager 7.2.

I will continue on Configurations blog coming soon.

See you soon.

former_member182655 · ‎02-16-2016

Great job, Yüksel!

Do you have plans to post "upgrade to SM7.2" blog?

Regards,

Artem

yakcinar · ‎02-16-2016

Hello Artem,

Thank you for reminding.

It wasnot in my plan.

I added upgrade work to my plan now.

Let's see when it occurs.

Regards,

Yuksel AKCINAR

Former Member · ‎02-17-2016

Hello Artem.

As a Customer representative I sent a request to participate in the RAMP Up program.

Please explain to me how can I download the DVS´s and do a On permisse installation.

Nice work with this blog

Regards.

Osvaldo Ferreira

yakcinar · ‎02-17-2016

Hello Osvaldo,

You download DVDs as usual installations.

But they appear under Solution Manager after approval of Ramp-Up.

Thanks and Regards,

Yuksel AKCINAR

roybrasse · ‎02-23-2016

Hi Yüksel,

I tried my first install the way you described and of course, I ended up with 7.2 SP00. In trying to update to SP01, I ran into some problems that I could not resolve.

The way I actually successfully installed 7.2 SP01 was by following the installation directions found on the download page. See below.

Installation:

The installation of SAP Solution Manager 7.2 SP01 needs to be run in the following way:

Plan the ABAP installation with the maintenance planner.
Install the SAP Solution Manager 7.2 SP01 ABAP system with SWPM and the stack.xml from step 1.
Install the SAP Solution Manager 7.2 SP01 Java system with SWPM from the Java DVD.
Connect the systems.

Thanks,

Roy

yakcinar · ‎02-23-2016

Hello Raufman,

I mentioned about the SP01 stack implementation in my blog under "You apply the latest kernel and Support Packages" section. And there are notes you must read and apply before SP01 implementation. Read the notes carefully.

And for Java, you donot implement SP01. Instead you must apply the pathces according to the note 2229953 - Solution Manager 7.2 SP Stack 01S0014395147: recommended corrections. as I mentioned in the blog.

Regards,

Yuksel AKCINAR

rvznavarro · ‎02-24-2016

Very informative blog. Thanks for Yüksel!

Regards,

Ronald

Former Member · ‎02-24-2016

Thank you for everythink.

Best Regards.

yakcinar · ‎02-24-2016

Thanks Ronald.

Thanks Omer.

former_member80258 · ‎02-25-2016

Excellent Work!!!!!

yakcinar · ‎02-25-2016

Thanks Eric.

khampariamukesh · ‎02-26-2016

Good Work Yuksel,

I have few questions, if you can reply -

1. Could you please tell me, in which step of JAVA installation, installer will understand that SMA is abap part of SMJ (java system)?

2. Whether they will be 2 database instances?

3. I just click on "Maintenance Planner" and it is showing only one system from my landscape, not all. Do we need to make any setting some where to see all the systems.?

4. In above link, I have not found the option to maintained the system, I mean to generate stack file.

Thanks

Mukesh

Caroleigh Deneen - removed email address

yakcinar · ‎02-26-2016

Hello Mukesh,

Here are the answers;

1- When you are maintaining UME information you give the ABAP systems info and user informations.

2- I put my Java DB in my ABAP DB Instance. You can install them on different instances. Also you can install the ABAP Java instances on seperate hosts.

3- I am not sure about it but I think the system definitions come from SMP. And SMP is getting the info from your solution manager. I need to check this also. If you find a doc send us also please.

4. In that link you could either plan a new system using "Plan a New System" and or select a system to plan a software change on your system by clicking "Plan".

Rregards,

Yuksel AKCINAR

khampariamukesh · ‎02-26-2016

Thanks Yuksel.

patelyogesh · ‎02-29-2016

I am going to work on upgrade proceess of solman 7.2.

yakcinar · ‎02-29-2016

Very well Yogesh.

I have a plan also for an upgrade but don't have time nowadays.

Waiting your comments on upgrade process and also for your blog.

Regards,

Yuksel AKCINAR

patelyogesh · ‎03-01-2016

I have started working on it and posted first document already

-Yogesh

Documents

Solution Manager 7.2 - Upgrade - I - Technical Checks and Preparations

Solution Manager 7.2 - Upgrade - II - Actual Upgrade Process

Solution Manager 7.2 - Upgrade - III - Dual Stack Split

Solution Manager 7.2 - Upgrade - IV - Correction After Dual Stack Split

Solution Manager 7.2 - Upgrade - V - SolMan Support Pack Stack 01 Correction

Solution Manager 7.2 - Upgrade - VI - SOLMAN_SETUP Wizard

Former Member · ‎03-02-2016

Hi Folks,

I am stuck in installing SOLMAN 7.1 on Windows 2012 R2 standard machine.

Downloaded all media from MarketPlace.

Faced a lot of issues, as not all needed media were in the same place like The Kernel.

Each time I got stuck at one level: Import ABAP.

My question: Is it easier to install SOLMAN 7.2 ? so, i can switch !

And which version of Software Provisioning i shall use ? mine is 1.0 and does not show the SOLMAN 7.2 in the options list.

Please help, I am lost in SAP jungle

More details, if you allow me:

Opened a thread at SAP community and the media corruption was suspected : http://scn.sap.com/message/16533177#16533177

I have downloaded again the media, but got the same error (please check attached)

"

An error occurred while processing option SAP NetWeaver 7.5 > MaxDB > SAP Systems > Application Server ABAP > Standard System > Standard System( Last error reported by the step: Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now:

Choose Retry
Choose Log Files
Stop the option and continue later.

Log files are written to C:/Program Files/sapinst_instdir/NW750/ADA/INSTALL/STD/ABAP.

"

Thanks in advance.

Ahmed.

patelyogesh · ‎03-02-2016

Please go through

SAP Note : 2227300 - Future Upgrade Information for SAP Solution Manager 7.2

This will give you some hint...

Thanks

Yogesh

Former Member · ‎03-08-2016

Hi Community Folks,

Still insisting and trying to sort this issue and succeed SOLMAN 7.1 installation.

Actually, in Market Place, only Media for 7.1 are available (and have downloaded all of them), so that decided to continue with it.

I have downloaded the latest version of SLTOOLSET Software Provisionning and , restarted the installation, but unfortunately, with same error at same level...

However, i took a look at the sapinst_dev and sapinst_loginquirer files and found one pertinent error:

System call failed. Error 5 (Access is denied.

) in execution of system call 'CreateFile' with parameter (C:\Documents and Settings), line (26) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxclink.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\guiengine\iaxxdirbrs.cpp: 74: CDirectoryBrsHandler::doHandleDoc()

d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\guiengine\iaxxdirbrs.cpp: 148: CDirectoryBrsHandler::findFiles()

d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\syxxclink.cpp: 131: CSyLinkImpl::isResolvable()

d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxclink.cpp: 85: CSyLinkImpl::resolveTarget()

d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxclink.cpp: 18: CSyLinkImpl::getTargetPathObject()

.

Failed action: CreateFile with parameters C:\Documents and Settings

Error number 5 error type WIN32_ERROR

The problem, is that I do not have drive (D:) in my virtual Windows machine !!!

And during the preparation phase, i have never mentionned a path with 😧 (C: rather, contains all media).

So, this might be the root cause ??

Can anyone help, please ??

Thanks,

Ahmed.

patelyogesh · ‎03-08-2016

Hello Ahmed,

This is Operationg system access related issue. make sure <sid>adm and SAPService<SID> user have full access to D Drive

Regards,

Yogesh

Former Member · ‎03-08-2016

Dear Yogesh,

Thanks for your input.

Actually, I have checked the User profiles and they do not have any access restrction.

Besides, the 😧 drive does not exist at my system. It is a DVD and my system is virtual !!!!

I got another advice from one colleague also to disable Integrity checks, but did not succeed:

Microsoft Windows [Version 6.3.9600]

C:\Windows\System32>bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS

The operation completed successfully.

C:\Windows\System32>

Please see attached.

Thanks.

Ahmed.

patelyogesh · ‎03-08-2016

Can you please search "d:\depot\bas\720_rel\bc_720-2_rel" in your windows server registry ?

Former Member · ‎03-09-2016

Hi Yogesh,

Unfortunately, there is no single entry in the registry database refering to this path..

Please, see snapshot with search & result.

In the other hand, during pre-checks, the Software Provisionning alarted me about 2 pre-requisities (One Windows fix + Swap size): Please, may you have a look (in the same snapshot).

Best Regards,

khampariamukesh · ‎03-09-2016

HI Ahmad,

which user you are trying to install solution manager. Please make sure it should have Administrative Right. It must not be SIDADM.

If you can tell me the steps, I may help further.

Thanks

Mukesh

Former Member · ‎03-09-2016

Hi Mukesh,

I am usig the super user (administrator) to run the sapinst.

This user should have the full access rights.

The installation is launched, bt got stuck at import ABAP level with the above mentionned ERROR

Thanks for your help.

patelyogesh · ‎03-09-2016

Can you start SAP installation from begening as new installation and make sure you remove folder C:\Program Files\sapinst_instdir

-Yogesh

khampariamukesh · ‎03-09-2016

Hi Ahmad,

why it is showing 7.5

SOLMAN 7.1 is in NW740.

Former Member · ‎03-10-2016

Hi Mukesh,

I think, it depends on the SLTOOL Softare Provisioning Manager.

I have downloaded the latest version 1.2016 (see snapshot).

I am trying to install the Netweaver now, then, will install the SOLMAN on top of it.

if you have any suggestion, please advice.

If you have any smart hand procedure, apart from the official mauals, please share it with me; because I am really lost.

khampariamukesh · ‎03-10-2016

Hi Ahmad,

1. You have to understand that you are installing SAP SOLMAN 7.1 .. Right ?

2. If Yes, SOLMAN 7.1 is based on NW 740. Then there is no meaning of taking SWPM that has feature of 7.5 and SOLMAN 7.2.

I can suggest, please use lower version of SWPM which has option for SOLMAN 7.1 and select option as I suggested in previous screenshot.

Thanks

Mukesh

Former Member · ‎03-11-2016

Hi Mukesh,

Thanks, totally agree with you...

However, in all SAP notes and guides, they advise to use the latest version of SWPM !!

Besides, please, can you guide me which exact version i might use and from where I can download ?

I used this link to fetch the latest version, but all of the available versions are (new) of 2016:

https://websmp110.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=Y&FUNCTIO...

Used also : https://support.sap.com/software/installations/a-z-index.html

then, Installations and Upgrades - S" SL TOOLSET" SL TOOLSET 1.0

Thanks for your guidance, and let us cose this discussion here, as part of SOLMAN 7.2

Warm Regards,

Ahmed.

Former Member · ‎03-11-2016

I found where to fetch the SWPM for SOLMAN 7.1:

The version should be 70SWPM10SP09_9-20009707

It is located in MaretPlace :

https://websmp202.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=Y&FUNCTIO...

Then click : Software Logistics Toolset 1.0

Then scroll down and click :

download tool /

Then : Support Package patches ==> look down and select from the 4 lines the desired version.

For SOLMAN 7.1, as it is based on Netweaver 7.0, then we can select either:

-

70SWPM10SP09_9-20009707.sar

SWPM 1.0 SP09 for NW7.0x

70SWPM10SP10_2-20009707.sar

SWPM 1.0 SP10 for NW7.0x

Will resume the setup, and see if this will work for me.

Thanks and I suggest that this shoule be included in the guides...

Former Member · ‎03-11-2016

Solution Manager 7.1 is based on NW 7.02.

Former Member · ‎03-16-2016

Hi,

I downloaded SWPM from the Maintenance planner and obtained the stack file. However when I try to execute SAPINST I get the following error message:

Seems like it is trying to target SP2 instead of SP1 in the stack.xml.

Any pointer as to how I can solve that ?

Generated XML file points to the following info:

Thanks.

patelyogesh · ‎03-22-2016

Where do you see that its trying SP2 ?

Former Member · ‎03-22-2016

Hi Yogesh,

I must have misused Maintenance Planner because it was trying to install Solution Manager 7.2 with SAP Fiori for Solution Manager 1.0 instead of Netweaver 7.4...

I was able to regenerate a stack file with the correct information and it worked.

However, I am now stuck during the installation of SP01 with SUM.

Upgrade is stuck during phase MAIN_UPTRANS/SUCCCHK because of Transport Request SAPK-74022INCTSPLGN.

I have followed the recommendations of SAP Note 2197897 and it has not worked so far.

I am opening an OSS message for this problem.

Thank you for your time.

Former Member · ‎03-22-2016

Marc see note https://websmp230.sap-ag.de/sap/support/notes/2220306

You need to remove the transport from the buffer. here are my notes:

-

Take the backup of the buffer file SMD in the directory <Drive>:\SUM\abap\buffer by copying it to another folder

Then

Execute the command in CMD Prompt in your above described buffer directory "tp delfrombuffer SAPK-74022INCTSPLGN <SID> pf=<drive_letter>:\SUM\abap\var\DEFAULT.TPP". This will delete the package from buffer

so for example my SUM folder was on X:\ on Windows and my SID was SMD - X:\SUM\abap\buffer>tp delfrombuffer SAPK-74021INCTSPLGN SMD pf=X:\SUM\abap\var\DEFAULT.TPP

Former Member · ‎03-22-2016

That worked!

Thank you for your Help Andrew!

Upgrade is now on its way again!

Slight adjustment to your recommended solution since I did not have the tp program in my buffer folder for some reason, I had to use the one from my SAP instance at \usr\sap\SM2\DVEBMGS00\exe\tp.exe

Former Member · ‎03-22-2016

Very comprehensive guide which is definitely a very good starting point. At least for me, I know I will use this when I get the chance to play with SolMan 7.2.

patelyogesh · ‎03-23-2016

Hello Jing,

If you plan to UPGRADE your SolMan you can use below ...

Solution Manager 7.2 - Upgrade - I - Technical Checks and Preparations

Solution Manager 7.2 - Upgrade - II - Actual Upgrade Process

Solution Manager 7.2 - Upgrade - III - Dual Stack Split

Solution Manager 7.2 - Upgrade - IV - Correction After Dual Stack Split

Solution Manager 7.2 - Upgrade - V - SolMan Support Pack Stack 01 Correction

Solution Manager 7.2 - Upgrade - VI - SOLMAN_SETUP Wizard

Thanks

Yogesh

Former Member · ‎03-24-2016

Hello yuksel.akcinar4,

How to apply for SOLMAN 7.2?

yakcinar · ‎03-24-2016

Hello Sandeep,

Goto http://service.sap.com/rampup

There is a link for enrollment form.

Regards,

Yuksel AKCINAR

Former Member · ‎04-21-2016

hi

We installed the solman 7.2 vanilla setup. And now while trying to upgrade to SP02 from SP00, SUM complains "j2ee engine was not deinstalled properly". In the stack.xml contains information that the system is a solman and contains a java instance as well. The java is instance running as a tenant db on the oracle DB.

Thanks in advance for the help.

Veena

yakcinar · ‎04-21-2016

Hello Veena,

Solution Manager 7.2 is not a dual stack installation.

When you run maintenance planner as you could see above SM Abap Stack is coming. There is no Java stack.

Regards,

Yuksel AKCINAR

Former Member · ‎04-21-2016

Hi Yüksel

Yes correct its installed as a separate double stack. How can i proceed in upgrading the system then since now i have java instance also running on the machine?

yakcinar · ‎04-21-2016

Hello Veena,

Try creating maintenance transaction using maintenance planner and create the ABAP stack xml. Think Java as different system on the same host. You will deal with it later.

Just create ABAP Stack xml for your system.

Then use latest SUM tool and apply the stack to your ABAP system.

Regards,

Yuksel AKCINAR

Former Member · ‎04-21-2016

Hi Yüksel

The issue we have is, our SOlman 7.2 sp00 is running on Oracle(abap and java on 1 db instance), and during the upgrade, SUM upgrade of abap stack(we only provided abap stack.xml) sees j2ee in the system says the deinstallation of j2ee did not work.

The question now is does the db also need to be seperate, because it looks like the SUM sees java and does not like it.

yakcinar · ‎04-21-2016

Hello Veena,

I am using SQL Server and the same instance with the same DB ID. Only schema differs.

It mustnot be a problem.

What about the definition of your SID on market place. Is it defined "SAP SOLUTION MANAGER 7.2" as product , "Solution Manager ABAP" as usage type and "SAP NETWEAVER" as Installation Product?

Regards,

Yuksel AKCINAR

Former Member · ‎04-27-2016

Hi Yüksel Akçinar,

I have Small Doubt here in solution manager 7.2. I have installed the solution manager 7.2 ABAP successfully & applied all the parameter as suggested by SAP Note no-2048519.after that i have run all the post steps and done the client copy also. So my doubt is can i install the Solution Manager 7.2 JAVA directly or else need to be upgrade the ABAP STACK.

Regards

Hemant Singh

yakcinar · ‎04-27-2016

Hello Hemant,

Install ABAP first. When you are installing Java you can define your ABAP system as UME system.

You don't need to upgrade ABAP before installing Java system. You can do it after Java Installation.

Regards,

Yuksel AKCINAR

Solution Manager 7.2 - Installation and Configuration - I - Installations

Installation:

SAP PI for Beginners

ABAP 7.40 Quick Reference

Fiori: technical installation and configuration of one app from A - Z