cancel
Showing results for 
Search instead for 
Did you mean: 

SAP NetWeaver 7.52 SP Abort execution because of Step returns modlib.jslib.caughtException

former_member667878
Discoverer
0 Kudos

Hi, I can't install, using VirtualBox in opensuse leap, because of

"Abort execution because of
Step returns modlib.jslib.caughtException"

Can anyone help?

The complete log:

To install this TestDrive you have to accept
the SAP COMMUNITY DEVELOPER License (DEV).
Do you agree to the above license terms? yes/no:
User's response to the accept license prompt = 'yes'
Please enter a password:
Please re-enter password for verification:
extracting data archives...
extracting /media/sf_sapinst/server/TAR/x86_64/sapmnt.tgz-*
Checking Linux kernel memory management parameters according to SAP Note 941735
Backing up /etc/sysctl.conf in /etc/sysctl.backup
Checking Linux kernel parameter vm.max_map_count according to SAP Note 900929
Checking presence of new SYBASE license files
No new licenses were copied from /media/sf_sapinst/server/TAR/x86_64 to /sybase/NPL/SYSAM-2_0/licenses
Install service
Check Installation Path ... saphostexec is already running (pid=1471). Stopping...Stopped
ok
Copy Executable ...
ok
Generate Profile ...
ok
Install SYS-V service ...
ok
-> Start /usr/sap/hostctrl/exe/saphostexec pf=/usr/sap/hostctrl/exe/host_profile <-
start hostcontrol using profile /usr/sap/hostctrl/exe/host_profile
ok
[OK] SAPHostExec / SAPHostControl succesfully installed
Executing: "/usr/sap/hostctrl/exe/SAPCAR" -xvf "./SHADBMETRICSDEF.SAR" -R "/usr/sap/hostctrl/exe/config.d"
SAPCAR: processing archive ./SHADBMETRICSDEF.SAR (version 2.01)
x dbmetric.definition.db4.cimobj
x dbmetric.definition.db6.cimobj
x dbmetric.definition.hdb.cimobj
x dbmetric.definition.mss.cimobj
x dbmetric.definition.ora.cimobj
x dbmetric.definition.sap.cimobj
x dbmetric.definition.siq.cimobj
x dbmetric.definition.syb.cimobj
x dbmetric.definition.tst.cimobj
x dbmetrics.d
x dbmetrics.d/00.general.hdb.cimobj
x dbmetrics.d/00.state.hdb.cimobj
x dbmetrics.d/10.host.capacity.hdb.cimobj
x dbmetrics.d/20.indexserver.hdb.cimobj
x dbmetrics.d/20.nameserver.hdb.cimobj
SAPCAR: 15 file(s) extracted
SAPCAR: rc 0
=>sapparam(1c): No Profile used.
=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
################################################
Abort execution because of
Step returns modlib.jslib.caughtException
################################################

Error: sapinst has finished with an error code, please find logs in /tmp/sapinst_instdir
Error code: 20
++++ Support data section BEGIN ++++
* mount
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
devtmpfs on /dev type devtmpfs (rw,nosuid,size=2452888k,nr_inodes=613222,mode=755)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
/dev/sda2 on / type btrfs (rw,relatime,space_cache,subvolid=268,subvol=/@/.snapshots/1/snapshot)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14210)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
/dev/sda2 on /var type btrfs (rw,relatime,space_cache,subvolid=258,subvol=/@/var)
/dev/sda2 on /srv type btrfs (rw,relatime,space_cache,subvolid=261,subvol=/@/srv)
/dev/sda2 on /root type btrfs (rw,relatime,space_cache,subvolid=262,subvol=/@/root)
/dev/sda2 on /.snapshots type btrfs (rw,relatime,space_cache,subvolid=267,subvol=/@/.snapshots)
/dev/sda2 on /home type btrfs (rw,relatime,space_cache,subvolid=264,subvol=/@/home)
/dev/sda2 on /opt type btrfs (rw,relatime,space_cache,subvolid=263,subvol=/@/opt)
/dev/sda2 on /boot/grub2/x86_64-efi type btrfs (rw,relatime,space_cache,subvolid=265,subvol=/@/boot/grub2/x86_64-efi)
/dev/sda2 on /usr/local type btrfs (rw,relatime,space_cache,subvolid=259,subvol=/@/usr/local)
/dev/sda2 on /boot/grub2/i386-pc type btrfs (rw,relatime,space_cache,subvolid=266,subvol=/@/boot/grub2/i386-pc)
/dev/sda2 on /tmp type btrfs (rw,relatime,space_cache,subvolid=260,subvol=/@/tmp)
Shared on /media/sf_Shared type vboxsf (rw,nodev,relatime,iocharset=utf8,uid=0,gid=458,dmode=0770,fmode=0770,tag=VBoxAutomounter)
/tmp/swpm/sapinst on /media/sf_sapinst type vboxsf (rw,nodev,relatime,iocharset=utf8,uid=0,gid=458,dmode=0770,fmode=0770,tag=VBoxAutomounter)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=494252k,mode=700,uid=1000,gid=100)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=100)
/dev/sr0 on /run/media/tobias/VBox_GAs_6.1.4 type iso9660 (ro,nosuid,nodev,relatime,uid=1000,gid=100,iocharset=utf8,mode=0400,dmode=0500,uhelper=udisks2)
* df -h
Filesystem Size Used Avail Use% Mounted on
devtmpfs 2.4G 0 2.4G 0% /dev
tmpfs 2.4G 0 2.4G 0% /dev/shm
tmpfs 2.4G 26M 2.4G 2% /run
tmpfs 2.4G 0 2.4G 0% /sys/fs/cgroup
/dev/sda2 98G 43G 55G 44% /
/dev/sda2 98G 43G 55G 44% /var
/dev/sda2 98G 43G 55G 44% /srv
/dev/sda2 98G 43G 55G 44% /root
/dev/sda2 98G 43G 55G 44% /.snapshots
/dev/sda2 98G 43G 55G 44% /home
/dev/sda2 98G 43G 55G 44% /opt
/dev/sda2 98G 43G 55G 44% /boot/grub2/x86_64-efi
/dev/sda2 98G 43G 55G 44% /usr/local
/dev/sda2 98G 43G 55G 44% /boot/grub2/i386-pc
/dev/sda2 98G 43G 55G 44% /tmp
Shared 242G 134G 108G 56% /media/sf_Shared
sapinst 242G 134G 108G 56% /media/sf_sapinst
tmpfs 483M 5.7M 477M 2% /run/user/1000
/dev/sr0 57M 57M 0 100% /run/media/tobias/VBox_GAs_6.1.4
* df -hi
Filesystem Inodes IUsed IFree IUse% Mounted on
devtmpfs 599K 460 599K 1% /dev
tmpfs 604K 1 604K 1% /dev/shm
tmpfs 604K 685 603K 1% /run
tmpfs 604K 18 604K 1% /sys/fs/cgroup
/dev/sda2 0 0 0 - /
/dev/sda2 0 0 0 - /var
/dev/sda2 0 0 0 - /srv
/dev/sda2 0 0 0 - /root
/dev/sda2 0 0 0 - /.snapshots
/dev/sda2 0 0 0 - /home
/dev/sda2 0 0 0 - /opt
/dev/sda2 0 0 0 - /boot/grub2/x86_64-efi
/dev/sda2 0 0 0 - /usr/local
/dev/sda2 0 0 0 - /boot/grub2/i386-pc
/dev/sda2 0 0 0 - /tmp
Shared 1000 -976K 977K - /media/sf_Shared
sapinst 1000 -976K 977K - /media/sf_sapinst
tmpfs 604K 44 604K 1% /run/user/1000
/dev/sr0 0 0 0 - /run/media/tobias/VBox_GAs_6.1.4
* cat /etc/os-release
NAME="openSUSE Leap"
VERSION="15.1"
ID="opensuse-leap"
ID_LIKE="suse opensuse"
VERSION_ID="15.1"
PRETTY_NAME="openSUSE Leap 15.1"
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:opensuse:leap:15.1"
BUG_REPORT_URL="https://bugs.opensuse.org"
HOME_URL="https://www.opensuse.org/"
* ls -ld / /sybase /usr/sap /sapmnt
drwxr-xr-x 1 root root 190 Mar 19 16:35 /
drwxr-xr-x 1 root root 6 Sep 6 2019 /sapmnt
drwxr-x--- 1 1003 1002 6 Feb 20 2017 /sybase
drwxr-xr-x 1 root root 22 Sep 6 2019 /usr/sap
++++ Support data section END ++++
All logs have been written to the file /media/sf_sapinst/install_2020-03-20_16-58-29.log
Please see readme.html to find out how to get help

anthonyxdxd
Member
0 Kudos

hi , Whoever is trying to install this and have this error you have to follow this steps in this blog, it works for me,

https://blogs.sap.com/2020/08/04/sap-as-abap-7.52-sp04-trial-dev-edition-issues-and-lessons/

Accepted Solutions (0)

Answers (15)

Answers (15)

profitlich42
Participant

If someone comes across this in 2021, like me:

The solution is to update the ASE license. This is the reason, why an additional license file can be found in the download section, which is not mentioned anywhere.

So first install everything like instructed. Wait for above error. Then place the license file in the folder:

/sybase/NPL/SYSAM-2_0/licenses (btw., I have not renamed it)

and then start the installation again.

(source: https://blogs.sap.com/2018/08/30/as-abap-7.5x-ase-license-available/)

----

additional information:

I have no clue, why noone is mentioning it, but this installation needs 2 licenses. First is the database license file, mentioned here, which is a surprise for everyone, who has never dealt with the installation of sybase ASE databases before.

The second one is the ABAP license, which can be updated here: https://go.support.sap.com/minisap/#/minisap

naresh_chiriki
Explorer
0 Kudos

Hi Andreas,

Could you please provide some steps in detail. I am facing same issue but couldnt solve it.

Thank you.

Hey Andreas, It worked for me. Whoever is trying to install in 2021 July need to update the license as it is expired in March 2021.

You need to open the file: /sybase/NPL/SYSAM-2_0/licenses (you need root login)

You will find a license SYBASE_ASE_TestDrive.lic

You can download recent license from https://developers.sap.com/trials-downloads.html?search=ABAP

Look for SAP ABAP AS Part License.

Download it and open it. Copy the license text and paste it to SYBASE_ASE_TestDrive.lic file (it's basically overwrite) > Do save as and save it at the same location (/sybase/NPL/SYSAM-2_0/licenses) with file name: SYBASE_ASE_TD.lic

Then delete the license SYBASE_ASE_TestDrive.lic

Try installing again by running the command

Make sure you are at vhcalnplci:/home/abaptrial/ABAP
run command: ./install.sh

It will successfully install. OK

fatihanil
Participant
0 Kudos

Thank you for your solution which is not mentioned anywhere.

kyo_choi2
Participant
0 Kudos

I had to rm the file from the folder then cp the file after log-in with root using su command. BTW. I am a Windows user for life and an ABAPer and not a BASIS.

kaygee1
Member
0 Kudos

I tried this several times, copied the new 2025 license to /sybase/NPL/SYSAM-2_0/licenses location, restarted the installing, and then it just hangs after a while. I tried renaming, cp'ing it, mv'ing it. I have probably tried the install from scratch 11 times and reinstalling 6 times with new license. Nothing works.

MarcSant
Discoverer
0 Kudos
Thank you so much my friend. Problem solved!
former_member667878
Discoverer

Hi, Problem solved, you Need to take a correct Password for SAP Installation otherwise the Installation is aborted. Take e.g. Password#000

former_member675127
Discoverer
0 Kudos

how did you resolve this ?

julieplummer20
Product and Topic Expert
Product and Topic Expert

Hi Ernst,

Did you follow the installation guide: SP01:

Newbies’ Guide: 752 Virtual Box

Newbies’ Guide: 752 VMWare

or SP04:

These all tell you to have a password of exactly 8 characters. Don't start with a special character ($%&). That might have saved you 5 days.

Best wishes,

Julie.

former_member675127
Discoverer

Hello Julie,

I am experiencing the same error again and again despite correct Password rule. Password I have put is Mahant19

Abort execution because of
Step returns modlib.jslib.caughtException"

Error Code : 20

Please help

Thansk

mohamed_abdelmoula
Discoverer
0 Kudos

Finally I solved this issue using those steps:
- delete sap* files (sapinit) under /etc/init.d/

- delete OS users sapadm npladm sybnpl with Linux command userdel

nipon_ch
Explorer
0 Kudos

My NPL install on the Opensuse Leap 15 is finally successful.

So I had 2 main issues :

1. Password problem ,

SOLUTION : change password to Asdf123. (1upper , 3 lower , 3 numbers , 1 special char)


2. The install hang on this output Authorizations set for /sybase/NPL/startase_reset_sa For more info please read also my post above and my comment to Bella Zoltan Jun 27, 2022 at 10:20 AM.

SOLUTION : see following topics

https://answers.sap.com/questions/13185432/docker-installation-of-as-abap-752-sp04-hangs.html

answered by Robert Stefanov May 03, 2021 at 04:37 PM

or

https://answers.sap.com/questions/13663172/abap-752-sp04-developer-edition-installation-proce.html

answered in comment by Claudia Rebekka Mayer Jun 17, 2022 at 07:46 AM

____________________________________________________________________________

But, what is not mention in the topics 13185432 and 13663172 is:

After adding -T11889 after -c/sybase/NPL/ASE-16_0/NPL.cfg in /sybase/NPL/ASE-16_0/install/RUN_NPL

I have to reboot to make the sybase database process gone first and then install SAP again. There was no need to uninstall and reinstall the whole SAP, because this file /sybase/NPL/ASE-16_0/NPL.cfg was automatically created by the 1st failed installation (install was hanging or password problem)

My OpenSuse kernel info below is mayby useful for you, if you use same OpenSuse like me and face same issue.

I wish you newbie SAP developer good luck in your install and cu again soon in another topics.

cat /proc/version
Linux version 5.14.21-150400.24.11-default (geeko@buildhost) (gcc (SUSE Linux) 7.5.0, 

GNU ld (GNU Binutils; SUSE Linux Enterprise 15) 2.37.20211103-150100.7.37) 

#1 SMP PREEMPT_DYNAMIC Sun Jul 17 20:46:33 UTC 2022 (be260ca)<br>
nipon_ch
Explorer
0 Kudos

I had same errors like Hadi Yousefpour wrote on Apr 08, 2021 at 08:47 AM , when I used this password Sapabap1

Then I change password to Asdf123. (1upper , 3 lower , 3 numbers , 1 special char)

Then the errors are gone.

But, the installation is stuck here without any errors, but will not end:

INFO 2022-07-31 07:05:49.898 (root/sapinst) (startInstallation) [iaxxbfile.cpp:594] id=syslib.filesystem.aclSetSucceeded CIaOsFile::chmod_impl(3,0755)
Authorizations set for /sybase/NPL/startase_reset_sa.

So I wait over 2 hours , notthing happens

Then I push Ctrl+C back to console.

in the log :

To install this TestDrive you have to accept
the SAP COMMUNITY DEVELOPER License (DEV).
Do you agree to the above license terms? yes/no:
User's response to the accept license prompt = ''
Do you agree to the above license terms? yes/no:
User's response to the accept license prompt = 'yes'
Please enter a password:
Please re-enter password for verification:
extracting data archives...
extracting /home/user1230/Desktop/VM/server/TAR/x86_64/dbdata.tgz-*
extracting /home/user1230/Desktop/VM/server/TAR/x86_64/dblog.tgz-*
extracting /home/user1230/Desktop/VM/server/TAR/x86_64/dbexe.tgz-*
extracting /home/user1230/Desktop/VM/server/TAR/x86_64/usrsap.tgz-*
extracting /home/user1230/Desktop/VM/server/TAR/x86_64/sapmnt.tgz-*
Checking Linux kernel memory management parameters according to SAP Note 941735
Backing up /etc/sysctl.conf in /etc/sysctl.backup
Checking Linux kernel parameter vm.max_map_count according to SAP Note 900929
Updating the sysctl option vm.max_map_count
The option vm.max_map_count was added to the configuration file
Checking presence of new SYBASE license files
Added the license file /sybase/NPL/SYSAM-2_0/licenses/SYBASE_ASE_TD.lic
Install service
[Thr 139921725335360] Sun Jul 31 07:02:07 2022
[Thr 139921725335360] Executing : useradd -c "SAP Local Administrator" -r -g sapsys -s /bin/false sapadm
Check Installation Path ...
ok
Copy Executable ...
ok
Generate Profile ...
ok
Install SYS-V service ...
[WARNING] installsapinit.sh exit with status 5
-> Start /usr/sap/hostctrl/exe/saphostexec pf=/usr/sap/hostctrl/exe/host_profile <-
start hostcontrol using profile /usr/sap/hostctrl/exe/host_profile
ok
[OK] SAPHostExec / SAPHostControl succesfully installed
Executing: "/usr/sap/hostctrl/exe/SAPCAR" -xvf "./SHADBMETRICSDEF.SAR" -R "/usr/sap/hostctrl/exe/config.d"
SAPCAR: processing archive ./SHADBMETRICSDEF.SAR (version 2.01)
x dbmetric.definition.db4.cimobj
x dbmetric.definition.db6.cimobj
x dbmetric.definition.hdb.cimobj
x dbmetric.definition.mss.cimobj
x dbmetric.definition.ora.cimobj
x dbmetric.definition.sap.cimobj
x dbmetric.definition.siq.cimobj
x dbmetric.definition.syb.cimobj
x dbmetric.definition.tst.cimobj
x dbmetrics.d
x dbmetrics.d/00.general.hdb.cimobj
x dbmetrics.d/00.state.hdb.cimobj
x dbmetrics.d/10.host.capacity.hdb.cimobj
x dbmetrics.d/20.indexserver.hdb.cimobj
x dbmetrics.d/20.nameserver.hdb.cimobj
SAPCAR: 15 file(s) extracted
SAPCAR: rc 0
=>sapparam(1c): No Profile used.
=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

I think the install was not successful , although there is no error.

How can I test ?

bellazoltan
Discoverer
0 Kudos

Hey, the solution is to make the new license File executable, chmod +x SYBASE_ASE_TD.lic.

nipon_ch
Explorer
0 Kudos

Thank u Bella

I deleted the last vm image with the stuck install .

Then I began new SAP intall with saved opensuse vmware image.

Now before the SAP install I did chmod +x SYBASE_ASE_TD.lic.

Now the install is stuck here, see the right terminal

___________________________________________________________________________________________________

INFO 2022-08-03 01:24:59.738 (root/sapinst) (startInstallation) [iaxxbfile.cpp:594] id=syslib.filesystem.aclSetSucceeded CIaOsFile::chmod_impl(3,0755)

Authorizations set for /sybase/NPL/startase_reset_sa.

I still do not break the install. And there is still no error in the log like previous install.

I open another left terminal and ps -ef

I saw a process " sh /sybase/NPL/startase_reset_sa " above the not killable " /sybase/NPL/ASE-16_0/bin/dataserver "

I have also found this in the NPL.log:

vhcalnplci:/sybase/NPL/ASE-16_0/install # grep -i "infected with signal 11" NPL.log
00:0002:00000:00000:2022/08/03 01:25:02.79 kernel  <strong>Current process (0x110009) infected with signal 11 (SIGSEGV)</strong>

This mean maybe something could fail , during the dataserver was processing.

Current process (0x110009) infected with signal 11 (SIGSEGV)

So I search in SAP community with this text

" Authorization set for /sybase/NPL/startase_reset_sa "

and found solution, see my SOLUTION in the privious post.

mrzigg
Discoverer
0 Kudos

Hello guys,

The password solution doesn't solve the problem for me. I've tried 4 different passwords but in vain. The error remains. Has anyone found another solution for this error? please share with us

Best regards

bellazoltan
Discoverer
0 Kudos

Hello everyone,

I tried to install Sap 7.52 on vmware Opensuse Leap15.2, i already renamed te License file, tried long passwords with symbols but nothing works, the issue is :

Abort execution because of

Step returns modlib.jslib.caughtException

################################################

INFO 2022-06-08 13:21:12.340 (root/sapinst) (startInstallation) [syuxcdir.cpp:147] id=syslib.filesystem.removedDirectory CSyDirectoryImpl::sap_remove(ISyFSErrorHandler * pErrorHandler)

Removed directory /root/.sapinst/vhcalnplci/15465.

Error: sapinst has finished with an error code, please find logs in /tmp/sapinst_instdir

All logs have been written to the file /home/abaptrial/ABAP/install_2022-06-08_13-18-31.log

Please see readme.html to find out how to get help

In the Log File :

=>sapparam(1c): No Profile used.

=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

################################################

Abort execution because of

Step returns modlib.jslib.caughtException

################################################

Error code: 20

Error: sapinst has finished with an error code, please find logs in /tmp/sapinst_instdir

++++ Support data section BEGIN ++++

* mount

can anyone help?

Thx

mrzigg
Discoverer

Hello,

I got the same error message. have you resolved the problem or not ? if yes, would you please share it here? I've been stuck with this error for 3 days

thanks

abdullmalik
Explorer
0 Kudos

did you find the solution please share stuck here ;

ceauke
Discoverer
0 Kudos

So it's now beyond Mar-2022. I downloaded the GB's of files just to realise that the license they supply is out of date. Any idea now (4-Jun-2022) where to get a new license file?

ceauke
Discoverer
0 Kudos

oh, I just fixed my password to 8 characters: at least one upper, lower, number and special char. And now the installation is successful even with the Mar-2022 license. And I can successfully connect to the SAP server and log in. Next step: Dev license 🙂

ralatorre87
Explorer
0 Kudos

Works like magic!!!

ThankYou!!!

mrzigg
Discoverer
0 Kudos

What solution that worked like magic ?!!!

Please let me know, because I have the some error

0 Kudos

i want to install SAP NetWeaver 7.52 SP and i have this error "Abort execution because of Step returns modlib.jslib.caughtException"

0 Kudos

Hi Julie ,

I have the same problem. this is the errors :

ERROR 2021-04-08 10:26:01.268 (root/sapinst) (startInstallation) [CInstallerCallBackImpl.cpp:259] id=ind-rel.ind-os.ind-db.assertionFailed errno=CJS-00030 CInstallerCallBackImpl::abortInstallation()
Assertion failed: Unable to generate a new password for database login 'sa'. Refer to trace file sapinst_dev.log for further information.

ERROR 2021-04-08 10:26:01.268 (root/sapinst) (startInstallation) [iaxxbjsmod.cpp:83] id=modlib.jslib.caughtException errno=MUT-03025
Caught ESAPinstException in module call: Assertion failed: Unable to generate a new password for database login 'sa'. Refer to trace file sapinst_dev.log for further information..

ERROR 2021-04-08 10:26:01.468 (root/sapinst) (startInstallation) [CSiStepExecute.cpp:1104] id=controller.stepExecuted errno=FCO-00011 CSiStepExecute::execute()
The step syb_step_reset_db_passwords with step key |offlineadjustment_dialogs|ind|ind|ind|ind|0|0|offlineadjustment_db_post|ind|ind|ind|ind|db_post|0|syb_rename_db_post_dia|ind|ind|ind|ind|syb|0|NW_SYB_DB_REN|ind|ind|ind|ind|syb2|0|syb_step_reset_db_passwords was executed with status ERROR (Last error reported by the step: Assertion failed: Unable to generate a new password for database login 'sa'. Refer to trace file sapinst_dev.log for further information).

I use ABAP AS 7.52SP04 and Oracle VM 6.1.18

Thanks for your help.

Hadi

julieplummer20
Product and Topic Expert
Product and Topic Expert
0 Kudos

Hi Kritesh,

This is a generic error code, which may not be connected to the password. There should be some log files in /tmp/sapinst_instdir . Please send us the errors in these files. Please do not send the whole files - they are far too big.

Best wishes Julie.

julieplummer20
Product and Topic Expert
Product and Topic Expert
0 Kudos

Also, please tell me what version of AS ABAP you are using, and what VM tech - VMWare or VBox.

Thanks Julie.

0 Kudos

Wow THANK You! That made it. Five days of trying because of just a easy solution...

Best Regards Martin Kirschner