cancel
Showing results for 
Search instead for 
Did you mean: 

No Receiver agreement found for Sender

Former Member
0 Kudos
111

Hello,

I have a scenario like this : sending an IDoc from R/3 4.6c to R/3 4.7 through XI 3.0.

I am struck up with the follwoing Error in SXMB_MONI

"outbound binding exception: No outbound binding found for , R46, , ENT, urn:sap-com:document:sap:idoc:messages, ORDERS.ORDERS04"

The Complete TRACE is as follows:

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

- <!-- Technical Routing

-->

- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">

<Trace level="1" type="B" name="IDX_INBOUND_XMB" />

- <!-- ************************************

-->

<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>

<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>

<Trace level="1" type="T">Syntax-Check-Flag X</Trace>

<Trace level="1" type="T">IDoc-Tunnel-Flag X</Trace>

<Trace level="1" type="T">Queueid</Trace>

- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">

<Trace level="1" type="T">Get the Metadata for port SAPR46</Trace>

<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>

<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>

</Trace>

<Trace level="1" type="T">Set Receiver Routing-object</Trace>

<Trace level="1" type="T">----


</Trace>

<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-SET_IDOC" />

<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>

- <Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA">

<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-ITAB_TO_BINARY" />

</Trace>

<Trace level="1" type="T">COMMIT is expected by application !</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />

<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />

<Trace level="1" type="T">****************************************************</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">XMB entry processing</Trace>

<Trace level="1" type="T">system-ID = XI3</Trace>

<Trace level="1" type="T">client = 800</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = SMART01</Trace>

<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">* *</Trace>

<Trace level="1" type="T">****************************************************</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />

- <!-- ************************************

-->

<Trace level="1" type="T">Message-GUID = F0EAB201EEA5F74A814EF22C32394FD0</Trace>

<Trace level="1" type="T">PLNAME = CENTRAL</Trace>

<Trace level="1" type="T">QOS = EO</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />

<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>

<Trace level="1" type="T">Queue name : XBTI0009</Trace>

<Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>

<Trace level="1" type="T">Schedule message in qRFC environment</Trace>

<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>

<Trace level="1" type="T">----


</Trace>

<Trace level="1" type="T">Going to persist message</Trace>

<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>

<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>

<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>

<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>

<Trace level="1" type="T">----


</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />

<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>

<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />

- <!-- ************************************

-->

<Trace level="1" type="T">----


</Trace>

<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>

<Trace level="1" type="T">system-ID = XI3</Trace>

<Trace level="1" type="T">client = 800</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = SMART01</Trace>

<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>

<Trace level="1" type="T">----


</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />

<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>

- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">

<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>

<Trace level="1" type="T">Cache Content is up to date</Trace>

</Trace>

</Trace>

</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />

- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">

<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>

<Trace level="1" type="T">Cache Content is up to date</Trace>

</Trace>

</Trace>

</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />

<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />

- <!-- ************************************

-->

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">

<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />

- <!-- ************************************

-->

<Trace level="1" type="T">number of receivers: 1</Trace>

<Trace level="1" type="T">Single-receiver split case</Trace>

<Trace level="1" type="T">Post-split internal queue name = XBTO____0000</Trace>

<Trace level="1" type="T">----


</Trace>

<Trace level="1" type="T">Persisting single message for post-split handling</Trace>

<Trace level="1" type="T" />

<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>

<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>

<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>

<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>

<Trace level="1" type="T">----


</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />

<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>

<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />

- <!-- ************************************

-->

<Trace level="1" type="T">----


</Trace>

<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>

<Trace level="1" type="T">system-ID = XI3</Trace>

<Trace level="1" type="T">client = 800</Trace>

<Trace level="1" type="T">language = E</Trace>

<Trace level="1" type="T">user = SMART01</Trace>

<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>

<Trace level="1" type="T">----


</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />

- <!-- ************************************

-->

<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />

<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>

<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>

- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">

- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />

- <!-- ************************************

-->

- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">

<Trace level="1" type="T">No mapping required</Trace>

</Trace>

</Trace>

</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />

<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA" />

<Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />

- <!-- ************************************

-->

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />

- <!-- ************************************

-->

- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">

<Trace level="1" type="T">processing the outbound binding</Trace>

<Trace level="1" type="T">search outbound bindings</Trace>

<Trace level="1" type="T">outbound binding exception: No outbound binding found for , R46, , ENT, urn:sap-com:document:sap:idoc:messages, ORDERS.ORDERS04</Trace>

</Trace>

</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />

<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>

<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

- <!-- ************************************

-->

</SAP:Trace>

I have made neccesary Configurations for the Receiver agreement in the Configuration Directory...

Anybody could please help me out...

Regards,

Romit Arun Shankar

Accepted Solutions (0)

Answers (2)

Answers (2)

Former Member
0 Kudos

Hi,

I have a scenario like this : sending an IDoc from ECC 6.0 to SQL through PI 7.0.

I am struck up with the follwoing Error in SXMB_MONI

<SAP:Stack>No receiver agreement found for sender ,JDBC_SQLServer to receiver ,DEV_200,,</SAP:Stack>

<SAP:Retry>M</SAP:Retry>

</SAP:Error>

Can you helpme?!??

Thanks!

frank_beunings
Employee
Employee
0 Kudos

Hi Romit,

try checking:

1) are you really really sure that you have an receiver agreement with the following keys:

Sender Party: <SPACE> or '*'

Sender Service: 'R46' or '*'

Interface Namespace: 'urn:sap-com:document:sap:idoc:messages'

Interface Name: 'ORDERS.ORDERS04'

Receiver Party: <SPACE>

Receiver Service: 'ENT'

2) Has this receiver agreement been activated successfully (can you see it on the Integration Server ABAP side using transaction SXI_CACHE)?

If the receiver agreement exists (look out for typing errors - everything is case-sensitive) and is visible in SXI_CACHE and SXI_CACHE does not give any errors, you will have to create an OSS. If the agreement is not visible in SXI_CACHE, try changing and activating the agreement again - look out for errors in SXI_CACHE.

regards, Frank

Former Member
0 Kudos

Hi Frank,

Many Thanks for your reply.The problem got sorted out and the IDoc(ORDERS04) which i send in SAP 4.6c gets into SAP 4.7 AS ORDERS04 but i have a new problem now....

I didnt use any mappings until now...but now i have to have the segment E1EDK14 filled up for Sales organisation, Distribution Channel, Division details as well as the material number. These segments will not be filled up when a PO is sent from the source system.These segments has to be filled only in the XI system...Is it ? or is there any other solution for it....

Now how we can have this segment E1EDK14 which can occur any number of times with constant values for SORG,DV,DC in the mapping process....

Waiting for ur replies....

Bye,

Romit Shankar Arun.

For this