cancel
Showing results for 
Search instead for 
Did you mean: 

Kernel upgrade from 700 to 720 in HP Unix

Former Member
0 Kudos
201

Dear Expert Team,

We want to upgrade our SAP Kernel from 700/291 to 720/401

After replacing Kernel file . We are able to start Lisner and Oracle but SAP Instance is not Starting.

We are using SAP ECC 6.0  with Oracle 11g on HP Unix 11.31 ia64 .

How we can update kernel 700 to 720? Its different process.

Regards

Pooja

Accepted Solutions (0)

Answers (9)

Answers (9)

former_member182657
Active Contributor
0 Kudos

Hi Pooja,

Try to download updated kernel from market place and follow steps to upgrade the kernel and after that re run the R3trans -d to get result output 0000.This is purely a kernel issue.

Regards,

Gaurav

Former Member
0 Kudos

Dear,

Now I have download  kernel 500 then check again , but problem is same , as below

sapqas:qasadm 21> R3trans -d

This is R3trans version 6.24 (release 720 - 08.07.13 - 20:13:05 ).

unicode enabled version

2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/QAS/SYS/exe/run') or dbms_type ('ORA')"

R3trans finished (0012).

sapqas:qasadm 22>

sapqas:qasadm 23> more trans.log

a26y0C4 ETW000 R3trans version 6.24 (release 720 - 08.07.13 - 20:13:05 ).

4 ETW000 unicode enabled version

4 ETW000 ===============================================

4 ETW000

4 ETW000 date&time   : 24.05.2014 - 22:19:08

4 ETW000 control file: <no ctrlfile>

4 ETW000 R3trans was called as follows: R3trans -d

4 ETW000  trace at level 2 opened for a given file pointer

4 ETW000  [     dev trc,00000]  Sat May 24 22:19:08 2014        452  0.000452

4 ETW000  [     dev trc,00000]  db_con_init called        35  0.000487

4 ETW000  [     dev trc,00000]  set_use_ext_con_info(): rsdb/ssfs_connect not set => ssfs not used       106  0.000593

4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3 ETW000         47  0.000640

4 ETW000  [     dev trc,00000]  create_con (con_name=R/3)   35  0.000675

4 ETW000  [     dev trc,00000]  Loading DB library '/usr/sap/QAS/SYS/exe/run/dboraslib.so' ...            76  0.000751

4 ETW000  [     dev trc,00000]  DlLoadLib() success: dlopen("/usr/sap/QAS/SYS/exe/run/dboraslib.so"), hdl 04 ETW000  42447  0.043198

4 ETW000  [     dev trc,00000]  Library '/usr/sap/QAS/SYS/exe/run/dboraslib.so' loaded 37  0.043235

4 ETW000  [     dev trc,00000]  function DbSlExpFuns loaded from library /usr/sap/QAS/SYS/exe/run/dboraslib.so 4 ETW000       180  0.043415

4 ETW000  [    dbcon.c ,00000]  *** ERROR => Codepage mismatch between kernel (UNICODE) and DBSL shared library '/usr/sap/QAS/SYS/exe/run/dboraslib.so' (ASCII)   256  0.043671

2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/QAS/SYS/exe/run') or dbms_type ('ORA')"

d@sapqas:qasadm 24>

Regards

former_member189797
Active Contributor
0 Kudos

ETW000  [    dbcon.c ,00000]  *** ERROR => Codepage
mismatch between kernel (UNICODE) and DBSL shared library
'/usr/sap/QAS/SYS/exe/run/dboraslib.so' (ASCII)   256  0.043671


Please make sure that you are using the corect kernel version. Unicode or non-unicode as per your system. Also both kernel parts should be updated (database independant and databse dependant).

Thanks.

regards,
Gaurav

Former Member
0 Kudos

Hi,

Download the right Kernel --> Take backup of original Kernel --> Place all .SAR files in Kernel directory --> Uncar the .SAR files using sapcar --> Run saproot.sh and oraroot.sh --> Start listener and database and then SAP.

Regards,

Nick Loy

Former Member
0 Kudos

Dear ,

I have check with dev_w0 log its show that.

The above error is because of the environment setting on

SHLIB_PATH=/usr/sap/QAS/SYS/exe/run:/oracle/client/10x_64/instantclient. Since the Oracle 11g is required Oracle instant client 11g, we need to set the SHLIB_PATH point to Oracle instant client 11g.

SHLIB_PATH=/usr/sap/QAS/SYS/exe/run:/oracle/client/11x_64/instantclient

Now I want to set SHLIB_PATH=/usr/sap/QAS/SYS/exe/run:/oracle/client/11x_64/instantclient .

So please give me step that how and where we have to set SHLIB_PATH .via vi editor.

Regards

0 Kudos

Hi Pooja,

in home directory of <sid>adm user are environment files begining with dot (.), like:

.dbenv_<hostname>.[sh | csh]

.sapenv_*.[sh | csh]

You should find where exactly SHLIB_PATH exists (grep -i shlib_path .db* and grep -i shlib_path .sap*)

and with vi editor change the path from 10x_64 to 11x_64.

You should log out and log in again as OS user <sid>adm, so that the new environment variables will be loaded.

Check it with env command.

Br

Tomislav

former_member182657
Active Contributor
0 Kudos

Hi Pooja,

Could you please share trans.log file for analysis.

Regards,

Gaurav

Former Member
0 Kudos

Dear ,

I have update oracle client version ,then reboot my system ,please find trans log

sapqas:/oracle/client/11x_64>ll

total 4

-r--r--r--   1 qasadm     sapsys         163 Mar 14  2012 dbclient.lst

drwxr-xr-x   2 qasadm     sapsys        1024 Mar 14  2012 instantclient_11203

sapqas:/oracle/client/11x_64>ln -s /oracle/client/11x_64/instantclient_11203 instantclient

sapqas:/oracle/client/11x_64>ll

total 4

-r--r--r--   1 qasadm     sapsys         163 Mar 14  2012 dbclient.lst

lrwxrwxrwx   1 root       sys             41 May 23 14:49 instantclient -> /oracle/client/11x_64/instantclient_11203

drwxr-xr-x   2 qasadm     sapsys        1024 Mar 14  2012 instantclient_11203

sapqas:/oracle/client/11x_64>

SQL> select * from v$version;

BANNER

--------------------------------------------------------------------------------

Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production

PL/SQL Release 11.2.0.3.0 - Production

CORE    11.2.0.3.0      Production

TNS for HPUX: Version 11.2.0.3.0 - Production

NLSRTL Version 11.2.0.3.0 - Production

SQL>

sapqas:qasadm 21>

sapqas:qasadm 21> startsap r3

Checking QAS Database

Database is not available via R3trans

-------------------------------------------

Database QAS must be started first

sapqas:qasadm 22> ll

sapqas:qasadm 23> more trans.log

a28y0C4 ETW000 R3trans version 6.23 (release 720 - 31.10.12 - 20:12:06).

4 ETW000 unicode enabled version

4 ETW000 ===============================================

4 ETW000

4 ETW000 date&time   : 23.05.2014 - 09:31:06

4 ETW000 control file: <no ctrlfile>

4 ETW000 R3trans was called as follows: R3trans -dx

4 ETW000  trace at level 2 opened for a given file pointer

4 ETW000  [     dev trc,00000]  Fri May 23 09:31:06 2014           10436  0.010436

4 ETW000  [     dev trc,00000]  db_con_init called                24  0.010460

4 ETW000  [     dev trc,00000]  set_use_ext_con_info(): rsdb/ssfs_connect not set => ssfs not used       208  0.010668

4 ETW000  [     dev trc,00000]  determine_block_commit: no con_hdl found as blocked for con_name = R/3

4 ETW000                      38  0.010706

4 ETW000  [     dev trc,00000]  create_con (con_name=R/3)                                                 24  0.010730

4 ETW000  [     dev trc,00000]  Loading DB library '/usr/sap/QAS/SYS/exe/run/dboraslib.so' ...            54  0.010784

4 ETW000  [     dev trc,00000]  DlLoadLib() success: dlopen("/usr/sap/QAS/SYS/exe/run/dboraslib.so"), hdl 0

4 ETW000                                                                                               48639  0.059423

4 ETW000  [     dev trc,00000]  Library '/usr/sap/QAS/SYS/exe/run/dboraslib.so' loaded                    36  0.059459

4 ETW000  [     dev trc,00000]  function DbSlExpFuns loaded from library /usr/sap/QAS/SYS/exe/run/dboraslib.so

4 ETW000                                    50  0.059509

4 ETW000  [    dbcon.c ,00000]  *** ERROR => Codepage mismatch between kernel (UNICODE) and DBSL shared library '/usr/sap/QAS/SYS/

exe/run/dboraslib.so' (ASCII)

4 ETW000                                  310  0.059819

d@sapqas:qasadm 24> possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/QAS/SYS/exe/run') or dbms_type ('ORA')"

Regards

former_member182657
Active Contributor
0 Kudos

Hi ,


ERROR => Codepage mismatch between kernel (UNICODE) and DBSL shared library '/usr/sap/QAS/SYS/

Here is your issue,your kernel & dbsl codepage is mismatched.So please follow SAP Note

1820534 - Codepage mismatch between kernel and DBSL shared library

Regards,

Gaurav


Reagan
Product and Topic Expert
Product and Topic Expert
0 Kudos

4 ETW000  [    dbcon.c ,00000]  *** ERROR => Codepage mismatch between kernel (UNICODE) and DBSL shared library '/usr/sap/QAS/SYS/exe/run/dboraslib.so' (ASCII)

Is the SAP system Unicode or Non-Unicode ?

If the system is Unicode make sure you use the Unicode kernel (SAPEXE and SAPEXEDB).

Run the below comand and provide the output.

su - qasadm

sapcontrol -nr 00 -function GetVersionInfo

Replace 00 with the right system number.

Regards

RB

former_member182657
Active Contributor
0 Kudos

Hi Pooja,

Please follow SAP note 400241.

Regards,

Gaurav

former_member182657
Active Contributor
0 Kudos

Hi Pooja,


"maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/QAS/SYS/exe/run') or dbms_type ('ORA')"

Please share the environment variable results as above issue only comes if you set wrong environment variables.

Use steps for sharing env variables results:

su - <sid>adm

> env

Regards,

Gaurav

Former Member
0 Kudos

Dear Pooja.

Try this:

Login with SIDadm and exicute the below command.

sapcpe pf=/usr/sap/P01/SYS/profile/<INSTANCE PROFILE>

sapcontrol -nr <INSTANCE NO.>  -function Start

Thanks

Mohd Basis

Former Member
0 Kudos

Dear ,

Please find the env setting

sapqas:qasadm 21> startsap r3

Checking QAS Database

Database is not available via R3trans

-------------------------------------------

Database QAS must be started first

sapqas:qasadm 22> env

HOME=/home/qasadm

PATH=/oracle/QAS/11203/bin:/opt/java1.4/bin:.:/home/qasadm:/usr/sap/QAS/SYS/exe/run:/usr/bin:/usr/ccs/bin:/usr/contrib/b

in:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/gvsd/bin:/opt/ipf/bin:/opt/nettladm/bin:/opt/fcms/bin:/opt/wbem/bin:/opt/wbem/

sbin:/opt/sas/bin:/opt/graphics/common/bin:/opt/hpvm/bin:/opt/atok/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/sec_mgmt/b

astille/bin:/opt/caliper/bin:/opt/drd/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/resmon/bin:/opt/firefox:/opt/ignite/bin:/usr

/contrib/kwdb/bin:/opt/perl_32/bin:/opt/perl_64/bin:/opt/prm/bin:/opt/propplus/bin:/opt/sfm/bin:/opt/swm/bin:/opt/sec_mg

mt/spc/bin:/opt/ssh/bin:/opt/swa/bin:/opt/hpsmh/bin:/opt/thunderbird:/opt/sentinel/bin:/opt/langtools/bin:/opt/gwlm/bin

LOGNAME=qasadm

SHELL=/bin/csh

TERM=hp

COLUMNS=120

LINES=57

MANPATH=/usr/share/man/%L:/usr/share/man:/usr/contrib/man/%L:/usr/contrib/man:/usr/local/man/%L:/usr/local/man:/opt/VRTS

/vxfs5.0/man:/opt/ipf/man:/opt/ldapux/share/man/%L:/opt/ldapux/share/man:/opt/ldapux/ypldapd/man:/opt/cifsclient/share/m

an:/opt/openssl/man:/opt/openssl/prngd/man:/opt/wbem/share/man/%L:/opt/wbem/share/man:/opt/graphics/common/man:/opt/hpvm

/share/man/%L:/opt/amgr/man/%L:/opt/amgr/man:/opt/sec_mgmt/share/man:/usr/dt/share/man:/opt/samba/man:/opt/samba/WTEC_Su

pport_Tools/man:/opt/caliper/man/%L:/opt/caliper/man:/opt/drd/share/man/%L:/opt/drd/share/man:/opt/dsau/man:/opt/resmon/

share/man/%L:/opt/resmon/share/man:/opt/ignite/share/man/%L:/opt/ignite/share/man:/usr/contrib/kwdb/share/man:/opt/perl_

32/man:/opt/perl_64/man:/opt/prm/man/%L:/opt/prm/man:/opt/propplus/share/man:/opt/psb/healthtest/share/man:/opt/sfm/shar

e/man:/opt/swm/share/man/%L:/opt/swm/share/man:/opt/swa/share/man/%L:/opt/swa/share/man:/opt/ssh/share/man:/opt/sentinel

/man/%L:/opt/sentinel/man:/opt/langtools/share/man/%L:/opt/langtools/share/man:/opt/openssl/fips/0.9.7/man:/opt/openssl/

fips/0.9.8/man:/opt/gwlm/man/%L:/opt/gwlm/man:/opt/icod/man/%L:/opt/icod/man

TZ=IST-5:30

SAPSYSTEMNAME=QAS

DIR_LIBRARY=/usr/sap/QAS/SYS/exe/run

SHLIB_PATH=/usr/sap/QAS/SYS/exe/run:/oracle/client/10x_64/instantclient

JAVA_HOME=/opt/java1.4

THREAD=NOPS

dbms_type=ORA

dbs_ora_tnsname=QAS

dbs_ora_schema=SAPSR3

ORACLE_SID=QAS

DB_SID=QAS

ORACLE_BASE=/oracle

TNS_ADMIN=/usr/sap/QAS/SYS/profile/oracle

ORACLE_HOME=/oracle/QAS/11203

NLS_LANG=AMERICAN_AMERICA.UTF8

SAPDATA_HOME=/oracle/QAS

sapqas:qasadm 23>

Regards

0 Kudos

Hi Pooja,

please try to install Oracle client version 11.

BR

Tomislav

former_member185239
Active Contributor
0 Kudos

Hi Pooja,

Run the below command

sapcpe pf=<instance profile DVEBMGS<XX> or JC<XX> >

sapcpe pf=<instance profile SCS<xx>

Restart the system and then paste the dev_w0 and dev_disp file

With Regards

Ashutosh Chaturvedi

Former Member
0 Kudos

Hi Pooja,

There can be different reasons for this. Exact sequence of steps you hvae followed and logs from work directory need to be checked for understanding the issue.

Following thread and SAP Notes may help you:

http://scn.sap.com/community/netweaver-administrator/blog/2013/05/22/upgrading-sap-kernel-from-relea...

1636252 - Installing a 7.20 kernel in SAP Web AS 7.00/7.01/7.10/7.11

1629598 - SAP Kernel 720 will replace older kernel versions

1610716 - Correcting run-time objects with incorrect alignment

1553301 - 7.20 EXT Kernel - Usage

1031096 - Installing Package SAPHOSTAGENT

19466 - Downloading SAP kernel patches

Please validate all steps mentioned for your O/S and DB  combination are followed as per above notes.

Thanks,

Abdul.

0 Kudos

Hi Pooja,

please check note 1636252 - Installing a 7.20 kernel in SAP Web AS 7.00/7.01/7.10/7.11

Also , please post error messages from trace files (work directory).

BR

Tomislav

former_member201782
Participant
0 Kudos

Hello Pooja,

Please let us know the process you followed to upgrade Kernel. Did you copy and replace the files in existing exe folder or renamed the old folder and placed the new one?

I suspect Global exe folder (under SYS Directory) and instance exe folder (under DVEBMGSXX) are not synched. Can you check Kernel version on both the folders.

Also can you check the dispatcher log in work directory for the error.

Thanks,

Srikanth

former_member264034
Active Contributor
0 Kudos


Hi,

You did a kernel upgrade. Please ensure, that you have

changed the sapstartsrv executable as well from 700 to 720.

1825259 - UNIX sapstartsrv: the system does not start with 720 kernel

So please ensure you had successfully update all the kernel to 720.

After this restart sapstartsrv, then restart sap system using command

sapcontrol.

You can check the sapstartsrv.log and dev_w* files to find details on why system is not starting.

Regards,
Aidan

Former Member
0 Kudos

Dear

I have rename OLD kernel 291 directory  exe_291_OK and cretae new directory exe

sapqas:/sapmnt/QAS>ll

total 80

drwsrwsrwt   5 qasadm     sapsys        8192 May 22 22:23 exe

drwxr-xr-x   7 qasadm     sapsys        8192 May 14 17:40 exe_291_OK

drwxr-xr-x   6 qasadm     sapsys        8192 May 15 00:16 global

drwxr-xr-x   3 qasadm     sapsys        8192 May 17 15:09 profile

sapqas:/sapmnt/QAS>

Copy all these below SAR file in /sapmnt/QAS/exe/   and uncar all these below file in /sapmnt/QAS/exe and uncar these below file.

Our Lisner and Oracle is working fine , but SAP Instance not starting.

sapqas:/sapmnt/QAS/exe>ll

total 1255136

-rwxrwxrwx   1 qasadm     sapsys            41 Apr 30  2013 DBATL720O10_31-20005247

-rwxrwxrwx   1 qasadm     sapsys        66352712 Apr 30  2013 DBATL720O10_31-20005247.SAR

-rwxrwxrwx   1 qasadm     sapsys     9430024 Oct 24  2012 SAPCAR1

-rwxrwxrwx   1 qasadm     sapsys          36 Apr 19  2013 SAPEXEDB_402-20005247

-rwxrwxrwx   1 qasadm     sapsys     26487431 Apr 19  2013 SAPEXEDB_402-20005247.SAR

-rwxrwxrwx   1 qasadm     sapsys          35 Apr 19  2013 SAPEXE_402-20005246

-rwxrwxrwx   1 qasadm     sapsys     533529272 Apr 19  2013 SAPEXE_402-20005246.SAR

-rwxrwxrwx   1 qasadm     sapsys     1519353 Apr 19  2013 lib_dbsl_421-20005205.sar

-rwxrwxrwx   1 qasadm     sapsys     5244838 Apr 19  2013 saphttp_324-20005246.sar

sapqas:/sapmnt/QAS/exe>

sapqas:/sapmnt/QAS/exe>./saproot.sh QAS

Preparing /usr/sap/QAS/SYS/exe/run/brbackup ...

Preparing /usr/sap/QAS/SYS/exe/run/brarchive ...

Preparing /usr/sap/QAS/SYS/exe/run/brconnect ...

Preparing saposcol ...

Error while accessing /usr/sap/put/exe/saposcol !

Run saproot.sh in the <put/exe> directory e.g.

cd /usr/sap/put/exe; saproot.sh C11

sapqas:/sapmnt/QAS/exe>

sapqas:qasadm 21>

sapqas:qasadm 21> R3trans -dx

This is R3trans version 6.23 (release 720 - 31.10.12 - 20:12:06).

unicode enabled version

2EETW169 no connect possible: "maybe someone set invalid values for DIR_LIBRARY ('/usr/sap/QAS/SYS/exe/run') or dbms_type ('ORA')"

R3trans finished (0012).

sapqas:qasadm 22>

When I am starting SAP

sapqas:qasadm 28> startsap r3

Checking QAS Database

Database is not available via R3trans

-------------------------------------------

Database QAS must be started first

sapqas:/usr/sap/QAS/DVEBMGS00/work>more dev_w0

M Wed May 21 21:23:03 2014

M  kernel runs with dp version 246000(ext=110000) (@(#) DPLIB-INT-VERSION-246000-UC)

M  length of sys_adm_ext is 576 bytes

M  ThInit: rdisp/cleanup_after_crash = 1

M  ***LOG Q01=> ThInit, WPStart (Workproc 0 1 13908) [thxxhead.c   1344]

M  ThInit: running on host sapqas

M  calling db_connect ...

B  Loading DB library '/usr/sap/QAS/DVEBMGS00/exe/dboraslib.so' ...

B  Library '/usr/sap/QAS/DVEBMGS00/exe/dboraslib.so' loaded

B  Version of '/usr/sap/QAS/DVEBMGS00/exe/dboraslib.so' is "700.08", patchlevel (0.290)

C  Oracle Client Version: '10.2.0.4.0', (dbsl 700 150211, UNICODE[2])

C  Application info callback registered.

C  Client NLS setting (OCINlsGetInfo): con=0, 'AMERICAN_AMERICA.UTF16'

C  Logon as OPS$-user to get SAPSR3's password

C  Connecting as /@QAS on connection 0 (nls 0) ... (dbsl 700 150211, UNICODE[2])C  Attaching to DB Server QAS (con_hdl=0

,svchp=0x600000000363ed98,srvhp=0x60000000036418b8)

C

C Wed May 21 21:23:04 2014

C  Starting user session: OCISessionBegin(con_hdl=0, usr='/',svchp=0x600000000363ed98, srvhp=0x60000000036418b8, usrhp=0

x60000000036b2ea0)

C     CbApplInfoGet() failed (ignored 1).

C  Connected to session 44.

C  Now '/@QAS' is connected: con_hdl=0, nls_hdl=0, session_id=44.

C     OCIStmtExecute() failed with -1=OCI_ERROR

C     SQL error 942:

C  *** ERROR => ORA-942 when accessing table SAPUSER

[dbsloci.c    11896]

C  Disconnecting from connection 0 ...

C  Closing user session (con_hdl=0,svchp=0x600000000363ed98,usrhp=0x60000000036b2ea0)

C  Now I'm disconnected from ORACLE

C  Info: 99=DBSL_ERR_DB, oerr=942, try to connect with default password.

C  Connecting as SAPSR3/<pwd>@QAS on connection 0 (nls 0) ... (dbsl 700 150211, UNICODE[2])

C  Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>, svchp=0x600000000363ed98, srvhp=0x60000000036418b

8, usrhp=0x60000000036b2ea0)

C  Connected to session 44.

C  Now 'SAPSR3/<pwd>@QAS' is connected: con_hdl=0, nls_hdl=0, session_id=44.

C  con=0, V$NLS_PARAMETERS: NLS_LANG=AMERICAN_AMERICA.UTF8, NLS_NCHAR_CHARACTERSET=UTF8, UNI_NON=FALSE

C  Nls CharacterSet   (Env./V$NLS)       NatioCharSet   (Env./V$NLS)            EnvHp      ErrHp      ErrBt

C    0 (UTF16)          UTF8             (AL16UTF16)      UTF8             0x6000000003626b70 0x600000000362e690 0x60000

0000363ee68

C  DB instance QAS is running on sapqas with ORACLE version 11.2.0.3.0 since MAY 21, 2014, 21:22:31

B  Connection 0 opened (DBSL handle 0)

M  db_connect o.k.

sapqas:/usr/sap/QAS/DVEBMGS00/work>more dev_disp

ed May 21 21:23:13 2014

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1696]

***LOG Q0K=> DpMsAttach, mscon ( sapqas) [dpxxdisp.c   12771]

DpStartStopMsg: send start message (myname is >sapqas_QAS_00                           <)

DpStartStopMsg: start msg sent

CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.

DpMsgAdmin: Set release to 7000, patchlevel 0

MBUF state PREPARED

MBUF component UP

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]

DpMsgAdmin: Set patchno for this platform to 291

Release check o.K.

Wed May 21 21:23:16 2014

MBUF state ACTIVE

DpModState: change server state from STARTING to ACTIVE

Thu May 22 21:29:42 2014

DpSigInt: caught signal 2

DpHalt: shutdown server >sapqas_QAS_00                           < (normal)

DpModState: change server state from ACTIVE to SHUTDOWN

Stop work processes

Thu May 22 21:29:43 2014

Stop gateway

Stop icman

Terminate gui connections

wait for end of work processes

wait for end of gateway

waiting for termination of gateway ...

Thu May 22 21:29:44 2014

wait for end of icman

waiting for termination of icman ...

Thu May 22 21:29:50 2014

DpStartStopMsg: send stop message (myname is >sapqas_QAS_00  <)

DpStartStopMsg: stop msg sent

Thu May 22 21:29:51 2014

DpHalt: sync with message server o.k.

detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   13117]

MBUF state OFF

MBUF component DOWN

cleanup EM

cleanup event management

cleanup shared memory/semaphores

removing request queue

***LOG Q05=> DpHalt, DPStop ( 13897) [dpxxdisp.c   11557]

*** shutdown completed - server stopped ***