Technology Blogs by SAP
Learn how to extend and personalize SAP applications. Follow the SAP technology blog for insights into SAP BTP, ABAP, SAP Analytics Cloud, SAP HANA, and more.
Showing results for 
Search instead for 
Did you mean: 
Product and Topic Expert
Product and Topic Expert
This blog post will cover the detailed steps required to install Apache 2.4.23 on Redhat Linux so that it can be used as a reverse proxy for SAP BusinessObjects Cloud system to allow Live Data connections from SAP BusinessObject Cloud to on-premise HANA systems.  The blog is created using Redhat 7, but similar steps will also apply for other Linux flavors.

Apache can be installed from binaries available through the OS distributor or from source.  I will cover both options in my blog, but whenever possible it's best to install Apache directly from binaries.  I've documented the differences between the two options below:

Option 1: Install Apache from Binaries

Step 1: Run the command to install apache.  Default Install location: /etc/httpd

Ÿyum install httpd

Step Ÿ2: Install openssl module.

Ÿyum install openssl

Step 3: Verify ssl module is available under the install directory(/etc/httpd/modules).  In addition, ssl.conf file should now also be available under /etc/httpd/conf.d directory.

Step Ÿ4: Install proxy_html module and verify the modules( and are available under install directory.  These modules are critical for BOC to work correctly as some of the BOC proxy rules require rewriting of html headers.

Ÿyum install mod_proxy_html

Step 5: Run apachectl start to start Apache server.

Launch a browser and access https://<your apache server hostname> to confirm Apache is running correctly.

Step 6: Add BOC proxy rules to ssl.conf file under /etc/httpd/conf.d directory.  For further instructions on setting up correct reverse proxy rules to SAP BusinessObjects Cloud to connect to on-premise HANA, refer to SAP BusinessObjects Cloud help documentation:

or use the blogs below created by my colleague.

Option 2: Install Apache from Source files

As mentioned above, the preferred option is to use the Apache binaries for installation, but in some cases you may need to compile Apache from source.  This option is only required when the version of Apache installed by OS distribution is older than what's supported for Business Objects Cloud.  For eg. older versions of Linux distributions may install Apache 2.2 using the binary method, but Business Objects Cloud requires Apache 2.4 to work correctly. In this scenario, either update the Linux OS or use the method below to compile a later(supported) version of Apache from source.

Note: For the purpose of this blog, I will install all required components under /home/apache directory.

Step 1: Install Pre-requisites

Depending upon your Linux version you may or may not have to install the packages below

Log into Linux as root user and run the following commands.

yum install gcc
yum install gcc-c++
yum install zlib  //This is required if compiling apache with mod_deflate module

Step 2: Download Apache 2.4.23

mkdir /home/apache
cd /home/apache

Apache is available for download from

Either download the Apache installation on Windows and transfer the files to your Linux machine or use the wget command to download directly to the Linux box.

From /home/apache folder run the following command to download the apache install media.  To find the exact http link to use in the wget command, right click http-2.4.23.tar.gz and click properties.


Extract the downloaded installation files.

tar xvzf httpd-2.4.23.tar.gz

You should see a httpd-2.4.23 directory under /home/apache.

Step 3: Download APR and APR-util

Navigate to /home/apache/httpd-2.4.23/srclib directory.

Download APR and APR-util from using wget.  As before right click on the links on the page to see the full URL to use in the wget command to download the files.



Extract both files.

tar xvfz apr-1.5.2.tar.gz

tar xvfz apr-util-1.5.4.tar.gz

The APR directory names will have version numbers attached which must be removed.  Use mv command to accomplish this:

mv apr-1.5.2 apr

mv apr-util-1.5.4 apr-util

Remove the downloaded .gz file as they are no longer need.

rm apr-1.5.2.tar.gz apr-util-1.5.4.tar.gz

The /home/apache/http-2.4.23/srclib should now have apr and apr-util directories.

Step 4: Download and compile PCRE

Navigate back up to /home/apache directory.
Download PCRE from


Extract the file.

tar xvfz pcre-8.39.tar.gz

cd into pcre-8.39 directory and run the following commands in sequence:

./configure --prefix=/home/apache/pcre


make install

While running the ./configure if you see "no acceptable C compiler found in $PATH" or "You need a C++ compiler for C++ support" ensure gcc and c++ packages are installed and accessible on your system.  Run the following commands:
yum install gcc
yum install gcc-c++

Step 5: Install mod_proxy_html module

This module allows Apache to rewrite html content.  This module must be installed in order to use Apache Reverse proxy with SAP BusinessObjects Cloud to allow for Live Data Connection to on-premise HANA.

mod_proxy_html module is available for download from

Navigate to /home/apache/httpd-2.4.23/modules directory and download the module.


Extract the file.
tar -jxvf mod_proxy_html.tar.bz2

You should see mod_proxy_html directory under modules as per the screenshot below. Optionally remove the mod_proxy_html.tar.bz2 file using  rm mod_proxy_html.tar.bz2

Step 6: Install and compile openSSL

Ensure you Linux system has latest version of openssl installed.  OpenSSL is available for download from

Most Linux systems will have openssl installed already, but it may not be the version required for Apache to work correctly.  If you see the errors while compiling Apache(see below), you will need to make sure openSSL is updated on your Linux system.

Navigate to /home/apache folder and run wget command to download openssl and use tar to extract the file


tar xvfz openssl-1.0.2j.tar.gz

Run cd /home/apache/openssl-1.02.j to navigate to the directory

Run the following commands in sequence. Note that the -fPIC flag should be set when running config to avoid errors with apache setup later.

./config –fPIC shared –prefix=/home/apache/openssl
make install

Step 7: Compile Apache

Navigate to /home/apache/httpd-2.4.23 directory and run the following commands in sequence

  • ./configure --prefix=/home2/apache/apache24 --enable-so --with-ssl=/home/apache/openssl --with-pcre=/home/apache/pcre --enable-mods-shared="proxy cache ssl all" --with-included-apr --enable-xml2enc –enable-proxy-html

  • make

  • make install

Note: In the configure command I am using the version of openssl that I installed to compile Apache.  If your linux system already has openssl installed there is no need to download and install it again.  Ensure that version of openssl is supported by Apache.  If you see an error like the one in screenshot below, update the openssl version on your linux system.

If the commands execute without any errors, Apache will successfully installed under /home/apache/apache24 directory with all the modules required for use with SAP BusinessObjects Cloud.

Confirm that and modules are visible under /home/apache/apache24/modules directory.

Post Installation Steps

Navigate to /home/apache/apache24/bin

Run ./apachectl start to start Apache server.

Launch a browser and access http://<your apache server hostname> to confirm Apache is running correctly.

Step 8: Configure Apache for SSL

Navigate to /home/apache/opensslbin directory.

Run the command below to generate a certificate request.  Enter the appropriate information for your certificate request when prompted.  DO NOT enter anything for "A Challenge Password" when prompted

openssl req -newkey rsa:2048 -nodes -keyout reverseproxy.key -out reverseproxy.csr

Find the certificate request file(reverseproxy.csr) under /home/apache/openssl/bin directory and submit the certificate request to your Certificate Authority and retrieve the certificate response.

Make a new directory call ssl under the /home/apache/apache24 to store the ssl certificates using command below:

mkdir /home/apache/apache24/ssl

Copy the reverseproxy.key file from openssl/bin folder to ssl folder under apache24

cp /home/apache/openssl/bin/reverseproxy.key /home/apache/apache24/ssl

Also Save the X.509 certificate response from your certificate authority in a file named reverseproxy.crt into /home/apache/apache24/ssl directory.

While it's recommended to have your certificate signed by certificate authority, for testing purposes you can use self-signed certificate.

To create self-signed certificate:
Under /home/apache/openssl/bin directory run the following command:

openssl x509 -req -sha256 -days 365 -in reverseproxy.csr -signkey reverseproxy.key -out reverseproxy.crt

Copy the generate reverseproxy.crt file to /home/apache/apache24/ssl directory.

Step 9: Modify Apache Configuration files

Navigate to /home/apache/apache24/conf directory.
Use vi to edit httpd.conf file.
Ensure the modules and sections highlighted in the screenshots below are NOT commented. Remove the # sign to uncomment the line.

Navigate to /home/apache/apache24/conf/extra directory.
Use vi to edit httpd-ssl.conf file.
Ensure SSLCertificateFile and SSLCertificateKeyFile lines are pointing to the correct location of those files. In our case, this SSL certificates are under /home/apache/apache24/ssl directory.

Navigate to /home/apache/apache24/bin folder.  Stop and Start Apache
./apachectl stop
./apachectl start

If Apache fails to start, confirm there are no typos in either httpd.conf or httpd-ssl.conf files.  You may also have to modify the LD_LIBRARY_PATH to include /home/apache/openssl/lib.

export LD_LIBRARY_PATH=/home/apache/openssl/lib:$LD_LIBRARY_PATH

Launch a browser window and access https://<your Apache server hostname> to confirm https URL also works.

Step 10: Configure BOC rules

You are now ready to use Apache Reverse Proxy to use with SAP Business Objects Cloud.  For further instructions on setting up correct reverse proxy rules to SAP BusinessObjects Cloud to connect to on-premise HANA, refer to SAP BusinessObjects Cloud help documentation:

or use the blogs below created by my colleague.
1 Comment