Technology Blogs by SAP
Learn how to extend and personalize SAP applications. Follow the SAP technology blog for insights into SAP BTP, ABAP, SAP Analytics Cloud, SAP HANA, and more.
Showing results for 
Search instead for 
Did you mean: 


I was working on a low cost option to connect some sensors to Hana Cloud Platform. HCP Internet Of Things Services (BETA) helped me realize this quicker and in standardized way. On searching internet for possibilities, I came across wifi modules using SoC called ESP8266 from Espressif Systems. I was able to connect DHT11 (Temperature and Humidity sensor) via ESP8266 to HCP IOT Services (BETA). This blog is just to share my experience.

What is ESP8266

ESP8266 is a low cost Wifi Chip from Espressif Systems. Some vendors have used this chip and provided various WiFi modules. All ESP8266 WIFI Modules come with built in TCP/IP Stack. They have a programmable 32bit Microcontroller and it can be programmed as an internet router to which other devices can connect to or it can be programmed to act as WiFi Client to connect to other servers or both at the same time.

Depending on the modules (ESP-1 to ESP-12) you purchase, There are several GPIOs (General Purpose I/O pins) along with SPI, UART and more which enables connecting many types of devices with this module.

Some advantages

  • Low cost device for IOT applications. (1/10th of Raspberry Pi)
  • Community support. You need not go through pages of data sheet.
  • Small size.

Some limitations that bothered me


More information on the module can be found here

Programming ESP8266

Espressif has released their SDK to program this module. It is complex and needs a fair amount of learning effort to use the SDK. Open source communities have made this simple by providing two easy ways to do it.

  1. A Development Kit and a open source firmware called NodeMCU is available which can be used to program ESP8266 easily with few lines of LUAScript. More details here
  2. Arduino IDE for ESP8266 which provides familiar Arduino Environment. For those are who have worked on Arduino, this will be a peice of cake. We will use this option for our project.

Setting up HCP IOT Services for our project

We have to create Device Type, Message Type and Device in IOT cockpit which we will use while sending messages from a device.

Following are the links where you get more information on HCP IoT Services.

Try out SAP HANA Cloud Platform Internet of Things (IoT) Services (BETA) and Starter Kit

I assume you already have Hana Cloud Platform Account. If not, you can follow this link to create one.

Enable Internet of Things Services (BETA) and Go to the service.

  1. Click on Services
  2. Click on Enable
  3. Click on Go to Service -> This will take you to Internet of Things Services Cockpit (BETA)

Install Message Management Service from Internet of Things Services Cockpit (BETA)

  1. Click on Install Message Management Service.


  1. username,
  2. password and
  3. Install the service. Once the service is successfully installed, iotmms dashboard link is displayed.
  4. The link (4) to the dashboard will not work as you have not assigned the role to access the dashboard. We will do it in next step.

Add user to the role Iot-MMS-User.

Go to the Java Applications in Hana Cloud Platform Cockpit and select "iotmms" from the list of java applications.

  1. Select Roles
  2. Click on Assign (This is accessible before the popup is shown)
  3. Provide User ID
  4. Click on Assign

  1. Click on Overview
  2. Click on Application URL

In the resulting screen as shown below, you can go to Internet of Services Cockpit by clicking on the tile 'View registered devices and device types'.

Now It is time to configure our device. Follow the steps mentioned in the images below.

Add a device type

Add a Message Type as shown in the image below

Create a Device as shown in the picture below.

Copy the Device ID and token and save it somewhere. We will be using it while sending message from the device.

This completes the configuration steps we need to do before actually sending sensor data to HCP.

Testing our Device and Message configuration

We have a Device called ESP8266_DHT11 with ID (90c8ca3d-b1a7-4496-889f-f9305b2892e2) which is of type TemperatureAndHumidity. We can send message from this device to Hana Cloud Platform IoT services using HTTP POST with JSON string as payload. We have to send OAuth token along with message to HCP.

A HTTP Client is provided in the iotmms application itself. We can also use an external http client to test our configuration. I used a Chrome App called Advanced Rest Client to send messages to HCP to mock the message is from a device.


Response for first request

Response for next requests

You can view the messages that were automatically stored in HCP by going to iotmms application

Hardware setup

ESP8266 can be programmed by connecting it to a computer via USB 2.0 to TTL Converter. I used CP2102 converter.

Connecting ESP8266 to CP2102 converter.


Connect DHT11 Data pin to GPIO2 and VCC and GND of the ESP8266.

Once these connections are made, You are ready to program the ESP8266.

Part-2 describes Overcoming limitations of ESP8266 Modules.