Technology Blogs by Members
Explore a vibrant mix of technical expertise, industry insights, and tech buzz in member blogs covering SAP products, technology, and events. Get in the mix!
Showing results for 
Search instead for 
Did you mean: 
Active Contributor

Update 16 Feb 2016: Added additional step to restart channel to refresh the cached certificate. Added link to second part of the blog series on client authentication.


HTTPS (HTTP over SSL) connections are sometimes a bit tricky to establish. There have been quite a number of threads opened on SCN recently regarding SSL related errors. Below are some of the common errors that could occur when trying to establish an outbound SSL connection from PI.

SOAP: Call failed: Peer certificate rejected by ChainVerifier
SOAP: Call failed: Peer sent alert: Alert Fatal: handshake failure PKIX path building failed: unable to find valid certification path to requested target

SAP's troubleshooting tool, XPI Inspector is one of the most useful tool to troubleshoot SSL connections. In this blog I will share an example of an SSL related error and how to utilize XPI Inspector to troubleshoot and resolve the issue.


XPI Inspector does not come pre-installed in the PI system. To install and use it, please refer to the following SAP Note:-

1514898 - XPI Inspector for troubleshooting XI

For more details about XPI Inspector, refer to the following blog:-

Michal's PI tips: XPI inspector - help OSS and yourself

Step by Step Guide

In this example, we will use a SOAP receiver channel with an HTTPS target URL. For simplicity sake, we will use SCN as the target system (even though it is not a SOAP web server!).

Step 1 - Set up receiver channel

Populate SCN's URL into the SOAP receiver channel's setting. Ensure that the iFlow/ICO is configured correctly and activated.

Step 2 - Launch XPI Inspector and start test

XPI Inspector can be accessed from the following URL of the PI system


Select Example 11 for Authentication, SSL & PP. Populate the SSL Server URL and any proxy server if necessary.

Once everything is ready for testing, click the Start button and then trigger the scenario for the iFlow/ICO in step 1. Once the scenario is completed, click Stop.

Step 3 - Analyse the results

After XPI Inspector has gathered all the logs, it will present a results page. Under section Performed Checks > Verify Remote SSL Server Certificate, the SSL debug logs are shown.

In the example below, it shows that the chain verification failed because no trusted certificate was found.

In the Performed Checks > Is Remote SSL Server Certificate Trusted section, more details of the certificate and the chain are shown.

The analysis shows that none of the certificates has a CA (Certificate Authority) that is trusted. It means that there is no corresponding certificate for the CA in the TrustedCAs view in NWA's keystore.

Step 4 - Retrieve the server's Root CA certificate

In order to establish the SSL trust with the server, we need to retrieve the Root CA's certificate and import it into NWA's keystore.

First of all, we need to retrieve the certificate. This can be done by entering the HTTPS URL into a web browser and viewing the certificate details. The example shown below is using Google Chrome where we can view the certificate information by clicking on the padlock icon on the browser.

After the certificate is displayed, switch to the Certification Path tab, select the top most entry of the path as it represents the Root CA. Click View Certificate to view the CA's certificate.

The Root CA certificate is displayed in another window and normally this is a self-signed certificate by the CA itself.

Switch to the Details tab and select Copy to File to save a version of the certificate on the local PC. It can be saved in the DER encoded binary X.509 format.

Alternatively, the certificates are also accessible via the hyperlinks on the XPI Inspector results page.

Step 5 - Import Root CA certificate into NWA's keystore

Now that we have the Root CA, we can import it into the keystore in NWA. The keystore can be accessed in NWA> Configuration > Security > Certificates and Keys.

Specifically, we want to import the Root CA certificate into the TrustedCAs view of the keystore. Refer to the following article on importing the certificate. We will only be importing the X.509 certificate.

Adding Certificates to PI

After completing the import, the Root CA certificate can be viewed as an entry in NWA.

Step 6 - Stop and restart receiver channel

Per SAP Note 1829329, the SOAP receiver channel caches the certificate upon channel start up. As such, it is recommended to stop the channel and restart it so that the channel's cache is updated with the new certificate.

Step 7 - Repeat XPI Inspector test

Now that the Root CA certificate is in place, the XPI Inspector test can be repeated.

In the results page, we can see now that the trusted certificate is found and the chain verification is successful. Therefore the SSL handshake completes successfully.

Additional Example

Here is an additional example of an XPI Inspector debug log for another SSL issue. In this case, the SSL handshake failed but not because the chain verification failed. After the chain verification, the server requested the client to present the client's certificate for authentication. However, the client sent an empty one causing the handshake to fail.

For this scenario, usage of client certificate for authentication is mandatory and therefore the resolution is to configure a valid client certificate to be used in the receiver channel.

For a thorough example on client authentication, check out the second part of this blog series - Using XPI Inspector to troubleshoot HTTP SSL connections (Part 2 - Client Authentication).


As shown, XPI Inspector is very useful to troubleshoot SSL related issues. As a matter of fact, I personally would use it at the beginning of a development that involves HTTPS connection before even designing or developing.

Labels in this area