Human Capital Management Blogs by Members
Gain valuable knowledge and tips on SAP SuccessFactors and human capital management from member blog posts. Share your HCM insights with a post of your own.
Showing results for 
Search instead for 
Did you mean: 
Product and Topic Expert
Product and Topic Expert

It has been more than 6 months since the Client went live with SuccessFactors Full Cloud (this included EC, ECP and a few Talent modules). The main highlight of the project was the much hyped EC - ECP Point-to-Point Replication i.e. integration between EC and ECP sans any middleware - typically Dell Boomi or SAP HCI (now known as SAP CPI - Cloud Platform Integration). And to top it off - this was the first if its kind in Australia! With any new and shiny (and untested) functionality there were lots of challenges to get it up and running; and at the end of the day some key takeaways that we could leverage at other implementations.

This document is intended to serve as a Consultant’s supplementary guide for a number of activities pertaining to the Employee Central to Employee Central Payroll Master Data Replication. As such it calls out some of the critical technical activities and complements the official Employee Central Payroll Using Point-to-Point Replication document by SAP.

Whilst it does not address each and every nuance of the integration for the replication, it however hopes to at least address some of the more common activities / concerns that an Integration Architect / Lead may encounter.

Business Scenario

  • Employee and employment-related data is maintained in Employee Central (EC)

  • Employee enters their contact data, biographical data, and payment information in EC

  • HR enters payroll-related information, like pay group and compensation information, like salary and pay rate, in EC

  • HR typically maintains additional tax in EC and is also saved in ECP

  • Employee Data (initial load and then changes) is sent to Employee Central Payroll (ECP) on a scheduled basis (every 3-5 mins)

  • For every payroll period, the payroll admin / specialist will prepare and execute all relevant payroll runs. To do this, the payroll admin / specialist will access ECP

  • The Employee accesses their payslips and pay statement in EC, which is directly rendered from ECP

  • The payroll information is then sent to Financials. The posting into accounting can be done automatically by using corresponding jobs. This requires SAP ECC to be integrated to ECP using standard interface technology (ALE)

EC Configuration

Payroll Configuration Picklists

Import the Payroll Configuration Picklists (of type Payroll Configuration) from the Success Store before configuring the Country specific Default Portlet

ECP Configuration

Activate Business Functions

Go to transaction SFW5 and switch on the Business Functions

HCM_SFEC_MDEC2HR (Employee Master Data Replication)

HCM_SFEC_TDEC2HR (Time Off Replication)

Number Range for Personnel Numbers

Go to transaction SPRO

Navigate to the node Personnel Management >> Personnel Administration >> Basic Settings >> Maintain number range intervals for personnel numbers

Ensure that the Number Range Intervals are the same as the intervals defined in Employee Central, and that this Number Range Number is flagged to use the External number range.

Reverse Proxy

Execute transaction SOAMANAGER (make sure that Service APPL_SOAP_MANAGEMENT is Active)

Click on Technical Administration, then SAP Client Settings

Click Append Row

Enter the below values –

Reverse proxy name - REVERSE_PROXY_ALL

Incoming http header host name - *

Incoming ICM port - *

Substitute host name - this is provided by SAP for the particular ECP system (typically this would be, where myXXXXXXX is the same number as in the customer system URL)

Substitute https port - 443

Meta data protocol substitution - https

Endpoint protocol substitution - https

Status - active (Reverse proxy is active)

Save the Reverse Proxy Settings



Security roles need to be created for the below ECP user groups –

  • Standard user

  • HR Admin

  • Payroll Admin

Interface User

An API User (User Type - System and User group - CUSTOMER) is required only if any other web service besides the standard replication web services is invoked. It needs the following role assigned –


Batch User

The Batch User (User Type - System and User group - CUSTOMER) needs the following roles assigned –

  • SAP_HR_PA_EC_EE_BNDL_REPL_V2 (required for Master Data Replication)

  • SAP_HR_TIM_EC_PTP_REPL (required for Time Off replication)


  • Other permissions as required

Tips & Tricks

Replicating Individual Employees

Here are the steps to manually run the EC – ECP replication for 1 Employee at a time

Switch off the replication background job

Set an external breakpoint in the below line of code in Class CL_HRSFEC_PTP_EE_REPLICATION Method BUILD_PARAM_CLAUSE

CONCATENATE ' <param>' ' <name>maxRows</name>' ' <value>200</value>' ' </param>' INTO rv_parameter_clause RESPECTING BLANKS.

Run the replication program RP_HRSFEC_PTP_EE_REPLICATION in online mode

The debugger will stop at the above line of code

Change the value of packet size 200 to 1 and continue

This will execute the replication for all the employees individually

Debugging Replication Web Service

Execute transaction SRTUTIL

Create a Trace for the User who will be running the debugger for the replication

Enter EmployeeMasterDataBundleRepli1 as the Service Definition

Click Save Configuration

Click Payload Trace

Go to (any of) the trace

Highlight on the Type = Call, then click on View Source Code.

This will open the ABAP editor in a new session

Set an external breakpoint.

When you run the replication program in online mode this will retrigger the call to the web service, and the debugger will be initiated.

Create a second external breakpoint in the Implementing Class of web service EmployeeMasterDataBundleReplicationRequest_In - Class CL_PAD_SFEC_EE_MDR_BNDL_REQ_IN Method II_PAD_SFEC_EE_MDR_BNDL_REQ_IN~EMPLOYEE_MASTER_DATA_BUNDLE_RE

From here you can navigate to Class CL_HRSFEC_EE_MDR_MAIN Method PROCESS_EMPLOYEE to the Infotype detail

The call stack is as below –








Rerun Delta Replication

To rerun replication from a given point of time modify the Last Modified Timestamp held in the system

Go to transaction SM30

Enter Table/View HRSFEC_PTP_LMOD and click Maintain

Change the Last Modified Timestamp for the Config ID relevant to the ECP system and instance and Save

Make sure that the Last Modified Timestamp is in UTC format (Zulu time)

Rerun the replication

Once the replication has run the Last Modified Timestamp will be updated to the new runtime

Payment Information

Section Adapting the HR Role or Payroll Admin role of the EC - ECP Point-to-Point Replication Implementation Guide talks about enabling the Payment Information checkbox in User Permissions >> Employee Data under HR Information. 

Please note that Payment Information sits under Miscellaneous Permission in User Permissions as per the diagram below -

UI Integration

Go to transaction SICF, activate the following nodes

Service Path Integrates
APPL_SOAP_MANAGEMENT /default_host/sap/bc/webdynpro/sap/ SOAMANAGER




External Service
HRPAO_PAOM_MASTERDATA /default_host/sap/bc/webdynpro/sap/ Country-specific master data
PAYSLIP /default_host/sap/EC/ Mashup - Payslip
PAYMNT_SUM_AU /default_host/sap/EC/ Mashup - Payment Summary
HRESS_A_PAYINFO /default_host/sap/bc/webdynpro/sap/ Mashup – Superannuation






















/default_host/sap/bc/ui5_ui5/ Payroll Control Center Mashups
IDoc /default_host/sap/bc/srt/ Inbound IDoc












/default_host/sap/opu/odata/sap/ Payroll OData APIs
SEC_DIAG_TOOL /default_host/sap/bc/webdynpro/sap/ SAML2 Diagnostic Tool


Common Replication Errors

This section list some of the more common errors encountered in the EC - ECP Replication. As you can see they are ALL data related. I cannot even begin to stress how vital it is that you have a strong governance around Master Data Management so that you don't suffer the same pitfalls! Remember this mantra - time spent in data cleansing is inversely proportional to errors faced in integration (not just limited to EC - ECP Replication). Higher data quality leads to minimal integration errors.

Bank errors

  • Bank AU XXX-XXX does not exist

  • Enter a quantity

  • Enter amount

  • Please enter standard value or percent for second bank

Address errors

  • Fill field Street and House No." of infotype 0006 for time period 01.05.2017 - 31.12.9999."

  • Postal code XXXXXXX should contain numbers only

  • Postal code xxx should contain numbers only

  • Max length 10 of target field exceeded. Source field address_information address2

  • No value mapping found for value XXXXXX of EC data type REGION

  • Country code XXX is not valid

Cost Center / Profit Center errors

  • Entry 1000 XXXXXXXXXX does not exist in CSKS (check entry)

  • Profit center 1000/XXXXX is locked for the date 01.05.2017

Employment errors

  • Max length 2 of target field exceeded. Source field job_information event_reason

Payroll errors

  • Please enter a frequency for payroll area 99 on 01.06.2013.

  • IndVal of wage type 0200: No entry in table T510 for key '13DLDL3DELOITTE010200' on 11.05.2017

  • Target Infotype not configured for wage type(s) XXXX, of country XX


The new Employee Central Payroll system is a Cloud system and is not a continuation of the SAP ERP on-premise system. The system is initially set up as an empty system with the highest version of the software components needed to run payroll. As such it has the below limitations –

  • If you are an existing on-premise customer you will need to bring in Customizing by transport or ask SAP Cloud Operations to do so all the configuration from your on-premise system before you commence data migration.

  • In case you have implemented any add-ons, you will need to request their installation as well.

  • This being a Cloud system SAP does not permit any modifications or enhancements to the standard SAP code page, and hence it might not be possible to bring all the custom code you had in your on-premise system into the ECP system. Therefore, you might need to find alternative solutions for issues that have been solved before by modifications or enhancements in the on-premise system. However, it is possible to define new payroll functions and operations, implement Business Add Ins, and create new development objects such as tables or programs in the customer namespace.

  • As this system can be on a higher release than your former on-premise system, it might be necessary to fill some database fields that did not exist in the old release in order to ensure that everything runs in the same way.

  • You have to accept the data as it is replicated from the Employee Central system. You can’t adjust the replicated data manually in the ECP system.

 Major Improvements

API Center

The API Center is an Integration Architect's one stop shop for access to all tools integration related as it has got all your OData & SFAPI toolkit on one single page (such as API Data Dictionary, Whitelisting, Audit Log, Metering Details and OAuth Configuration).

Data Replication Monitor

The biggest win lies in the usability of the EC - ECP Replication monitoring tool - the Data Replication Monitor. Earlier versions had the view limited to 4 rows of errors per page; whereas from Q2 2017 onwards the error table can be set to a much larger number (this number is dynamic and is dependent on the number of total errors at any given time; higher the number of errors - the table can be set to display more rows). Another neat little functionality is the addition of the parameter Country in the Selection Criteria (handy for multi-country rollouts).

Hoping to see many more such snazzy improvements from SAP in releases to come!

On a parting note I welcome feedback / correspondences from you all who have taken the bold and brave step to go ahead with what is fast becoming SAP's defacto Payroll solution in the Cloud; and would encourage a conversation on pros/cons, challenges/heartaches faced by other Customers.
Labels in this area