Showing results for 
Search instead for 
Did you mean: 

PO Release strategy

Former Member
0 Kudos

Dear All,

Will anybody give the link for configuration of Release stategy for Purchase order ???

Accepted Solutions (1)

Accepted Solutions (1)

Former Member
0 Kudos

dear Somasundaram

Release Procedures (approval) can be used for Purchase Requisitions (PR), Purchase Orders (PO), RFQ's, Outline Agreements and Service Entry Sheets. The principle is exactly the same for all. If you can master one, you will know them all.

below steps are settings of release procedures for PR , you can follow same for PO ( only diffrance is table name and field name in charectestics , USE : CEKKO

Lets set up release procedures for PR for the following example:

Our company have got 2 plants: Plant 3100 (London) and plant 3600 (New York).

For New York (plant 3100), if PR item value is between 0 - 1000 dollars, then PR needs to be released by one person (person B)

For New York (plant 3100), if PR item value is bigger than 1000 dollars, then PR needs to be released by two people (first by person B, then person C)

For London (plant 3600), if PR item value is bigger than 1000 dollars, then PR needs to be released by two people (first by person A, then person C).

Key terminology:

Release Codes - The different levels that the approval will go through.

Release Groups - Grouping of strategies.

Release Strategy - Unique, set of condition, sequence and levels of releases. Every line in diagram is a Strategy (so we have 3).

Release Indicator / Status - The status of PR as it moves through the strategy. Example 'Block' (can't create PO yet) or 'Final Release' (can create PO from PR)

Here is a summary of the steps to follow to set up our example:

Create Characteristics & link to comm. structre (CEBAN for PR)

Create Class & link to characteristic

Create Release Groups & link to class

Create Release Codes

Release Indicator

Set up strategies

- Strategies & Codes

- Prerequeirements

- Status

- Assign values for strategies

Set overall / item for doc type (PR only)

Create and allocate autorisation profiles



Create Characteristics & link to communication structure (CEBAN for PR)

Here we define which fields are used to determine the strategy that will kick in. In our case we used 'Plant' and 'Item value'. Not all fields in the PR can be used. For a full list of fields that can be used to determine the release startegy, see tcode se12 table CEBAN.

So the two fields that will be used is:

Field CEBAN-WERKS for Plant

Field CEBAN-GSWRT for Item Value

We need to create a characteristic for every field. tcode ct04

Any characteristic name can be used. Keep something descriptive to avoid confusion.

For Item Value -- lets create characteristic Z_GSWRT

First go to Additional Data tab and enter the table/field (and Enter)

Enter currency to be used in the Basic data tab.

Also select multiple values and Intervals allowed

The Intervals allowed will allow us to assign a range of values, example: If PR value is 0 - 1000 USD .....

Save the characteristic

For Plant -- characteristic Z_WERKS

Again, the table/field name in Additional Data to enter table/field

Again set multiple values and save the characteristic

The multiple values is to assign more than one plant to strategy, example: If PR for plant 3100 and plant 3600 is ...

Create Class & link to characteristic

Create a class (simply to group the characteristics). Again any name can be used. Tcode CL01 -- Create Class. The Class Type must be 032.

Configure Release Procedures

Above actions was all master data. We now need to do some configuration. Menu: IMG > Materials Management > Purchasing > Purchase Requisition > Release Procedure > Procedure with classification > Set up procedure -- (tcode OMGQ in older SAP versions)

Create Release Groups & link to class

We have two groups to create AA and AB. We need to indicate the class we are working with, in out case Z_PR.

Create Release Codes

Create all the release code / group combinations. This is all the dots in diagram above. So we have 4.

Later on, authorisation profiles will be linked to these code / group combinations.

Release Indicator

First we create the different statusses that the PR can be in throughout it lifecycle. Later on (below), we will be linking using these statusses. Here is the standard SAP indicators, wou probably wouldn't need to add any.

We will be using two of these -- X (Block) and 2 (Released)

Under the Details section, you can indicate which documents can be created from this PR. For Indicator 2, one can create PO's and RFQ's.

With Field Selection you can define which fields can be changed. This is the same indicator that gets used with document type configuration to make some fields read only, mandatory, hidden.

Set up strategies - Strategy & Codes

Every line in our diagram above is a strategy. So We have three

Lets call them:

Group AA / Startegy S1 -- Code L1 (for plant 0001)

Group AA / Startegy S2 -- Code L1 & L2 (for plant 0001)

Group AA / Startegy S2 -- Code L1 & L2 (for plant 0002)

Here are the settings for AA / S2

Set up strategies - Prerequisites

Fir every strategy, we need to define a release prerequisites. This indicate if one code need to take place before the other. In this case, level 2 (L2) can only take place if level 1 (L1) has been released.

Set up strategies - Status

This is also done for every strategy. The screen is dependant on what groups were linked to the strategy as well as prerequisites that was set up. In this example:

- if nobody release it then PR is block.

- if L1 release the PR, the PR is still blocked

- if L1 and L2 release the PR, the PR can be converted to RFQ/PO

Out of interest, the reason why there is not a L2 only option is because of the setting in the prerequisites.

Set up strategies - Values for strategies

The values linked to strategies are master data (not configuration) and can be set in two places. Either within the configuration itself -- selecting the classification button

Or, in classification, example CL24N

Both methods work, the advantage of CL24N is that all the strategies can be viewed easier.

Set overall / item for doc type (PR only)

For Puchase Requisitions, there is an option to release either on item level or on document level. For PO / RFQ / Contracts, one can only release on header level. Back to the PR, it is highly recommended to use item release. This can be done in two places.

Firstly where the groups were created

On the document type configuration for PR

Config menu: Materials Management > Purchasing > PR > Define document types

Create and allocate authorisation profiles

In our example we will have three people releasing, so three profiles will need to be created. Authorisation profiles can be created using tcode PFCG.

Usage of PFCG are not being discussed here, but see below for relevant screen where the profile was created.



Create a Purchase Requisition

Lets create a PR, and see if the release procedure kicks in. In our case we will create it for plant 3600 and any value. So we will expect Strategy AB / S2 to kick in.

Create PR -- me51n

If no 'Release strategy' tab, then it didn't work. In this case all is fine. The user can see the Release Group (AB), Strategy (S2) and release indicator (X).


Release a Purchase Requisition

Releasing can be done per PR or collective. Lets' use the collective release. SAP Menu: Logistics > Material Management > Purchasing > Purchasing Requisition > Release > Collective Release -- ME55

Select all the items to be released and then hit Save. You will see the status of the item change to the next Release Indicator.

for screen shots reffer below link

hope this will help you ..

reward points if helpful

thanks and regards

ravikant dewangan

Answers (2)

Answers (2)

Former Member
0 Kudos

Follow this link,

It will give steps with screen shots.

This is for Purchase requistion release strategy..

The only difference is for PR we use

Table CEBAN,

for PO - CEKKO

for Services - CESSR

So, get the Field names from CEKKO Table, in SE11 Transaction.

Eg, Plant - WERKS

Net order Value - GNETW etc.,

Edited by: Anand K on May 10, 2008 12:58 PM

Former Member
0 Kudos


Step 1

Create characteristic

T code:CT04

Materials Management  Purchasing  Purchase Order  Release Procedure for Purchase Orders  Edit Characteristic

step 11

Create Class

T code CL02

Materials Management  Purchasing  Purchase Order  Release Procedure for Purchase Orders  Edit Class

step 111

configure release procedure


Materials Management  Purchasing  Purchase Order  Release Procedure for Purchase Orders  Define Release Procedure for Purchase Orders

Hope this will Help

Please feel free to ask for more

Thanking you

Prabind Kumar Singh