cancel
Showing results for 
Search instead for 
Did you mean: 

Bin to Bin transfer(Urgent)

Former Member
0 Kudos
217

Hello Guys,

I have a question. We have a problem in warehouse and can anyone help me out of this scenario:

We have a warehouse, and we perform cycle counting to check the inventory. We want all the bins to hold the same quantity (say 100), if a bin has more than 100 items it is moved to the next neighbouring bin. So, all the bins exceeding 100 items (unique) get into a "NEW" bin and consequntly the count in the bin increases (from 0 to 100). In this process,

Say bin 1 is the bin from which material is removed and bin 2 is the bin to which material needs to be transfered. The status of the material in "Bin 1"is "unrestricted" but when it moved to "bin 2" it needs to be turned to "Block" until the bin gets filled completly. After the bin gets the required count(100), the status of the material needs to be changed back to "unrestricted".

Note:

1.Material used is unique

2.Bins can contain more than 100 items, but to make all the bins contain equal amount we carry out the process (making all the bins to contain equal amounts)

2.Status of the material needs to changed from un-restricted to blocked (during bin to bin trasfer) and back to unrestricted after the count is reached

Please help me out as early as possible, as I really need it very fast. Thanking you, in advance and hoping for a positive response from you, I take leave.

Regards,

Gandluri Srinivas

Accepted Solutions (1)

Accepted Solutions (1)

abhijit_sadhu
Active Participant
0 Kudos

Srinivas,

You could try doing the following 2 things:

1) Make the bin no. 2 as blocked for stock removal but open to stock placement. So you will be able to add material till its 100 and no one will be able to remove stock from it as well

OR

2) Move material into it and do a LQ02 mvmt with 343 and make the stock as blocked. so noone could use it.

After you are done, do a 344 and change the material stock status sitting in the bin as unrest. from blocked.

Hope this helps.

Former Member
0 Kudos

Thank you very much,

I have few more questions.

For first suggestion you've provided, can we make a "bin blocked for stock removal and open for stock placement" (help me out with configuration of doing it) at once.

Second suggestion: For our warehouse , in Tcode LQ02, movement types 343 and 344 are not avaiable in drop down menu.

So, Can you explain me in detail, hoping gor a positive response from you.

Regards,

Gandluri Srinivas

abhijit_sadhu
Active Participant
0 Kudos

For LQ02 - Movement type 344 not showing up here's what you need to do:

go to

SPRO - Logisitics Execution - warehouse management - interfaces - inventory management - define posting changes

Here select any exisiting entry, copy it and edit it . It would probably look like this

<WHNO>. 344 Posting change-blocked 344 -- S

The "S" in the column Stock category destination is imp and you can se it to S - blocked.

This will add 343 & 344 for allowed posting changes for that particular warehouse and then it'll visible in the dropdown as well.

For blocking bins go to trx LS06 and block the bins there , you can do that via LS02n too by selecting the bin and in the status tab, selecting the "stokc removal block"

Hope this helps.

Reward points if this helped you!

Former Member
0 Kudos

Hello Mr.Abhijit Sadhu,

It was a bingo. Thank you very very much for your reply. I've awarded you points, previously and adding more points now. Recently, I moved on to my next project where things are little different than the provious one's. Anyways, it was one the best solutions I've ever got from this forum. There's few more questions I have, would be thankful if you could clear them off for me.

In this project, I'm supposed to perform "Labeling" which I'm not familiar with. Label must contain imporrtant details like:

Items in handling unit (Material Description, Quantity, Number and Saler order Number) and customer address.Will be thankful if you could guide me through the exact configuration involved in labeling

Thanking you in Advance,

Gandluri Srinivas

Answers (0)