2008 Jun 26 9:38 AM
i need function module such that to convert sap format to pdf format....
if source code available attach it plz
2008 Jun 26 9:42 AM
call function 'CONVERT_OTF'
exporting
format = 'PDF'
max_linewidth = 132
importing
bin_filesize = v_len_in
tables
otf = i_otf
lines = i_tline
exceptions
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
Fehlerhandling
if sy-subrc <> 0.
endif.
use this function module
Regards
Anbu
2008 Jun 26 9:41 AM
Hi,
Chk the link :
http://help.sap.com/saphelp_nw04/helpdata/en/27/67443cc0063415e10000000a11405a/frameset.htm
Regards.
Edited by: Iyswarya Godi on Jun 26, 2008 10:42 AM
Edited by: Iyswarya Godi on Jun 26, 2008 10:42 AM
2008 Jun 26 9:41 AM
Hello.
Standard report RSTXPDFT4 converts spool content to a PDF file.
Regards.
Valter Oliveira.
2008 Jun 26 9:42 AM
Hi,
RSTXPDFT4 is a standard program which converts the spool generated into PDF format. Mayb its useful to u.
Nayan
2008 Jun 26 9:42 AM
call function 'CONVERT_OTF'
exporting
format = 'PDF'
max_linewidth = 132
importing
bin_filesize = v_len_in
tables
otf = i_otf
lines = i_tline
exceptions
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
others = 4.
Fehlerhandling
if sy-subrc <> 0.
endif.
use this function module
Regards
Anbu
2008 Jun 26 9:45 AM
Hi,
We have function module : CONVERT_ABAPSPOOLJOB_2_PDF to convert to PDF.
Below code will explain you for the same :
.
tables:
tsp01.
*-- STRUCTURES
data:
mstr_print_parms like pri_params,
mc_valid(1) type c,
mi_bytecount type i,
mi_length type i,
mi_rqident like tsp01-rqident.
*-- INTERNAL TABLES
data:
mtab_pdf like tline occurs 0 with header line,
mc_filename like rlgrap-filename.
*-- SELECTION SCREEN
parameters:
p_repid like sy-repid, " Report to execute
p_linsz like sy-linsz default 132, " Line size
p_paart like sy-paart default 'X_65_132'. " Paper Format
start-of-selection.
concatenate 'c:\'
p_repid
'.pdf'
into mc_filename.
*-- Setup the Print Parmaters
call function 'GET_PRINT_PARAMETERS'
exporting
authority= space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
in_archive_parameters = space
in_parameters = space
layout = space
mode = space
new_list_id = 'X'
no_dialog= 'X'
user = sy-uname
importing
out_parameters = mstr_print_parms
valid = mc_valid
exceptions
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
others = 4.
*-- Make sure that a printer destination has been set up
*-- If this is not done the PDF function module ABENDS
if mstr_print_parms-pdest = space.
mstr_print_parms-pdest = 'LOCL'.
endif.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
mstr_print_parms-linsz = p_linsz.
mstr_print_parms-paart = p_paart.
submit (p_repid) to sap-spool without spool dynpro
spool parameters mstr_print_parms
via selection-screen
and return.
*-- Find out what the spool number is that was just created
perform get_spool_number using sy-repid
sy-uname
changing mi_rqident.
*-- Convert Spool to PDF
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
exporting
src_spoolid= mi_rqident
no_dialog = space
dst_device = mstr_print_parms-pdest
importing
pdf_bytecount = mi_bytecount
tables
pdf = mtab_pdf
exceptions
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
others = 12.
call function 'DOWNLOAD'
exporting
bin_filesize = mi_bytecount
filename = mc_filename
filetype = 'BIN'
importing
act_filename = mc_filename
tables
data_tab = mtab_pdf.
*---------------------------------------------------------------------*
* FORM get_spool_number *
*---------------------------------------------------------------------*
* Get the most recent spool created by user/report *
*---------------------------------------------------------------------*
* --> F_REPID *
* --> F_UNAME *
* --> F_RQIDENT *
*---------------------------------------------------------------------*
form get_spool_number using f_repid
f_uname
changing f_rqident.
data:
lc_rq2name like tsp01-rq2name.
concatenate f_repid+0(8)
f_uname+0(3)
into lc_rq2name separated by '_'.
select * from tsp01 where rq2name = lc_rq2name
order by rqcretime descending.
f_rqident = tsp01-rqident.
exit.
endselect.
if sy-subrc ne 0.
clear f_rqident.
endif.
endform." get_spool_number
hope this helps you.
plz reward if useful.
thanks,
dhanashri.
2008 Jun 26 9:46 AM
hiiiii
use this FM
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = d_desired_type
IMPORTING
bin_filesize = d_doc_size
TABLES
otf = t_itcoo
lines = t_line
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc > 0.
RAISE otf_convert_failed.
ENDIF.
regards
twinkal
2008 Jun 26 9:47 AM
Hi,
Try FM " CONVERT_ABAPSPOOLJOB_2_PDF "
Sample Report:
REPORT Z_TEXT_SPOOL_CONVERT.
TABLES: TSP01.
PARAMETERS: P_SPID LIKE TSP01-RQIDENT.
DATA: BEGIN OF ITAB OCCURS 0.
INCLUDE STRUCTURE TLINE.
DATA: END OF ITAB.
DATA: C_DIA TYPE C VALUE 'X',
C_DEVICE LIKE TSP03-PADEST,
C_BYTE_CNT TYPE I.
DATA: P_FILE TYPE STRING VALUE '
DWDFHOME02\C5103908$\My Documents'.
DATA: NUM(5) TYPE C.
DATA: pdfspoolid like tsp01-rqident,
jobname like tbtcjob-jobname,
jobcount like tbtcjob-jobcount.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = P_SPID
NO_DIALOG = ''
DST_DEVICE = C_DEVICE
PDF_DESTINATION =
IMPORTING
PDF_BYTECOUNT = C_BYTE_CNT
PDF_SPOOLID = PDFSPOOLID
LIST_PAGECOUNT =
BTC_JOBNAME = JOBNAME
BTC_JOBCOUNT = JOBCOUNT
TABLES
PDF = ITAB
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
WRITE:/ 'PDF GENERATED'.
NUM = P_SPID.
CONCATENATE P_FILE '\' NUM '.PDF' INTO P_FILE.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME = P_FILE
FILETYPE = 'BIN'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = ITAB
FIELDNAMES =
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
WRITE:/ 'NOT'.
ENDIF.
Hope this helps you.
Regards,
Ruthra