Application Development Discussions
Join the discussions or start your own on all things application development, including tools and APIs, programming models, and keeping your skills sharp.
cancel
Showing results for 
Search instead for 
Did you mean: 

ale/idocs

Former Member
0 Kudos
73

i need an idoc program to send our custom table data.can any body help me.

1 ACCEPTED SOLUTION

Former Member
0 Kudos
47

Hi,

Refer to the links:

http://service.sap.com/lsmw

http://www.sapbrain.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html

http://www.sapgenie.com/saptech/lsmw.htm

http://www.sap-img.com/sap-data-migration.htm

http://www.sapgenie.com/saptech/lsmw.htm

http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf

http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Wor...

http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc

Also this may help:

Data Creation in Idoc

IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an

asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.

While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.

IDoc is a intermediate document to exchange data between two SAP Systems.

*IDocs are structured ASCII files (or a virtual equivalent).

*Electronic Interchange Document

*They are the file format used by SAP R/3 to exchange data with foreign systems.

*Data Is transmitted in ASCII format, i.e. human readable form

*IDocs exchange messages

*IDocs are used like classical interface files

IDOC types are templates for specific message types depending on what is the business document, you want to exchange.

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

FOr testing you can use WE19.

How to create idoc?

*WE30 - you can create a IDOC type

For more information in details on the same along with the examples can be viewed on:

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm

http://www.sappoint.com/presentation.html

http://www.allsaplinks.com/idoc_search.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://www.erpgenie.com/sapedi/idoc_abap.htm

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30 )

Create Message Type ( WE81 )

Assign Idoc Type to Message Type ( WE82 )

Creating a Segment

Go to transaction code WE31

Enter the name for your segment type and click on the Create icon

Type the short text

Enter the variable names and data elements

Save it and go back

Go to Edit -> Set Release

Follow steps to create more number of segments

Create IDOC Type

Go to transaction code WE30

Enter the Object Name, select Basic type and click Create icon

Select the create new option and enter a description for your basic IDOC type and press enter

Select the IDOC Name and click Create icon

The system prompts us to enter a segment type and its attributes

Choose the appropriate values and press Enter

The system transfers the name of the segment type to the IDOC editor.

Follow these steps to add more number of segments to Parent or as Parent-child relation

Save it and go back

Go to Edit -> Set release

Create Message Type

Go to transaction code WE81

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter

Click New Entries to create new Message Type

Fill details

Save it and go back

Assign Message Type to IDoc Type

Go to transaction code WE82

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.

Click New Entries to create new Message Type.

Fill details

Save it and go back

Check these out..

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

ALE/ IDOC

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

go trough these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...

1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.

2.IDOCs are independent of the sending and receiving systems.

3.IDOCs are independent of the direction of data exchange.

The two available process for IDOCs are

Outbound Process

Inbound Process

AND There are basically two types of IDOCs.

Basic IDOCs

Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.

Extended IDOCs

Extending the functionality by adding more segments to existing Basic IDOCs.

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30)

Create Message Type ( WE81)

Assign Idoc Type to Message Type ( WE82)

imp links

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

www.sappoint.com

--here u can find the ppts and basic seetings for ALE

http://sappoint.com/presentation.html

www.sapgenie.com

http://www.sapgenie.com/ale/index.htm

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

Try this..Hope this will help.

SAP ALE & IDOC

To find a Exit.

Goto Transaction -- Find The Package

SMOD >f4>Use the Package here to Find the Exits In the Package.

Else if you Want to search by Application Area wise ,

There is one more tab to find the Exits in the Respective Application Area.

Implementing the Exit-- CMOD Create ProjectsAssgn your Component .

Now Run ur Transaction to Check if it Triggers.

Thats it..

Suppose you need to find out all the user exits related to a tcode.

1. Execute the Tcode.

2. Open the SAP program.

3. Get the Development Class.

4. Execute Tcode SE84.

5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'

6. Enter the Development class and execute.

Check out this thread..

1. Type the transaction : system->status-> <PROG. NAME>

2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.

3. Open CMOD utilities->SAP enhancements

EDIT->All selections

4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.

5. The displayed list contains the enhancements names for the transaction You were looking for.

6. Create a project in CMOD and the code in default include->activate.

http://www.erpgenie.com/sap/abap/code/abap26.htm

which gives the list of exits for a tcode

http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm

For information on Exits, check these links

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sapgenie.com/abap/code/abap26.htm

http://www.sap-img.com/abap/what-is-user-exits.htm

http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction

http://www.easymarketplace.de/userexit.php

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sappoint.com/abap/userexit.pdfUser-Exit

http://www.planetsap.com/userexit_main_page.htm

User-Exits

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sap-img.com/ab038.htm

http://www.planetsap.com/userexit_main_page.htm

http://www.sap-basis-abap.com/sapab013.htm

http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283

These links will help you to learn more on user exits.

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm

http://www.planetsap.com/userexit_main_page.htm

http://www.allsaplinks.com/user_exit.html

www.sap-img.com/abap/what-is-user-exits.htm

Also please check these threads for more details about user exits.

1. Document on UserExits in FI/CO

http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc

2. Finding User Exits...

http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits

3. List of all User Exits...

http://www.planetsap.com/userexit_main_page.htm

Reward points if found helpful.....

Cheers,

Chandra Sekhar.

2 REPLIES 2

Former Member
0 Kudos
47

Hi Nandan,

Check The Below Links:

http://sap.niraj.tripod.com/id51.html

http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1145292_tax293481,00.ht...

Kindly Award Points If You Find The Reply Helpful.

Cheers,

Chaitanya.

Former Member
0 Kudos
48

Hi,

Refer to the links:

http://service.sap.com/lsmw

http://www.sapbrain.com/TUTORIALS/TECHNICAL/LSMW_tutorial.html

http://www.sapgenie.com/saptech/lsmw.htm

http://www.sap-img.com/sap-data-migration.htm

http://www.sapgenie.com/saptech/lsmw.htm

http://sapabap.iespana.es/sapabap/manuales/pdf/lsmw.pdf

http://www.sap.info/public/INT/int/glossary/int/glossaryletter/Word-17643ed1d6d658821_glossary/L#Wor...

http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc

Also this may help:

Data Creation in Idoc

IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an

asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.

While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.

IDoc is a intermediate document to exchange data between two SAP Systems.

*IDocs are structured ASCII files (or a virtual equivalent).

*Electronic Interchange Document

*They are the file format used by SAP R/3 to exchange data with foreign systems.

*Data Is transmitted in ASCII format, i.e. human readable form

*IDocs exchange messages

*IDocs are used like classical interface files

IDOC types are templates for specific message types depending on what is the business document, you want to exchange.

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

FOr testing you can use WE19.

How to create idoc?

*WE30 - you can create a IDOC type

For more information in details on the same along with the examples can be viewed on:

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm

http://www.sappoint.com/presentation.html

http://www.allsaplinks.com/idoc_search.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://www.erpgenie.com/sapedi/idoc_abap.htm

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30 )

Create Message Type ( WE81 )

Assign Idoc Type to Message Type ( WE82 )

Creating a Segment

Go to transaction code WE31

Enter the name for your segment type and click on the Create icon

Type the short text

Enter the variable names and data elements

Save it and go back

Go to Edit -> Set Release

Follow steps to create more number of segments

Create IDOC Type

Go to transaction code WE30

Enter the Object Name, select Basic type and click Create icon

Select the create new option and enter a description for your basic IDOC type and press enter

Select the IDOC Name and click Create icon

The system prompts us to enter a segment type and its attributes

Choose the appropriate values and press Enter

The system transfers the name of the segment type to the IDOC editor.

Follow these steps to add more number of segments to Parent or as Parent-child relation

Save it and go back

Go to Edit -> Set release

Create Message Type

Go to transaction code WE81

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter

Click New Entries to create new Message Type

Fill details

Save it and go back

Assign Message Type to IDoc Type

Go to transaction code WE82

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.

Click New Entries to create new Message Type.

Fill details

Save it and go back

Check these out..

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

ALE/ IDOC

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

go trough these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...

1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.

2.IDOCs are independent of the sending and receiving systems.

3.IDOCs are independent of the direction of data exchange.

The two available process for IDOCs are

Outbound Process

Inbound Process

AND There are basically two types of IDOCs.

Basic IDOCs

Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.

Extended IDOCs

Extending the functionality by adding more segments to existing Basic IDOCs.

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30)

Create Message Type ( WE81)

Assign Idoc Type to Message Type ( WE82)

imp links

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

www.sappoint.com

--here u can find the ppts and basic seetings for ALE

http://sappoint.com/presentation.html

www.sapgenie.com

http://www.sapgenie.com/ale/index.htm

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

Try this..Hope this will help.

SAP ALE & IDOC

To find a Exit.

Goto Transaction -- Find The Package

SMOD >f4>Use the Package here to Find the Exits In the Package.

Else if you Want to search by Application Area wise ,

There is one more tab to find the Exits in the Respective Application Area.

Implementing the Exit-- CMOD Create ProjectsAssgn your Component .

Now Run ur Transaction to Check if it Triggers.

Thats it..

Suppose you need to find out all the user exits related to a tcode.

1. Execute the Tcode.

2. Open the SAP program.

3. Get the Development Class.

4. Execute Tcode SE84.

5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'

6. Enter the Development class and execute.

Check out this thread..

1. Type the transaction : system->status-> <PROG. NAME>

2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.

3. Open CMOD utilities->SAP enhancements

EDIT->All selections

4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.

5. The displayed list contains the enhancements names for the transaction You were looking for.

6. Create a project in CMOD and the code in default include->activate.

http://www.erpgenie.com/sap/abap/code/abap26.htm

which gives the list of exits for a tcode

http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm

For information on Exits, check these links

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sapgenie.com/abap/code/abap26.htm

http://www.sap-img.com/abap/what-is-user-exits.htm

http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction

http://www.easymarketplace.de/userexit.php

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sappoint.com/abap/userexit.pdfUser-Exit

http://www.planetsap.com/userexit_main_page.htm

User-Exits

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://www.sap-img.com/ab038.htm

http://www.planetsap.com/userexit_main_page.htm

http://www.sap-basis-abap.com/sapab013.htm

http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283

These links will help you to learn more on user exits.

http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm

http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm

http://www.planetsap.com/userexit_main_page.htm

http://www.allsaplinks.com/user_exit.html

www.sap-img.com/abap/what-is-user-exits.htm

Also please check these threads for more details about user exits.

1. Document on UserExits in FI/CO

http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc

2. Finding User Exits...

http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits

3. List of all User Exits...

http://www.planetsap.com/userexit_main_page.htm

Reward points if found helpful.....

Cheers,

Chandra Sekhar.