cancel
Showing results for 
Search instead for 
Did you mean: 

Windows Application server to SAP server running on SUSE linux

Former Member
0 Kudos
146

Hi,

i'm trying to deploy application server (windows 2003, ECC 5.0) to SUSE linux based SAP ECC 5.0.

during installation i happend to face problem regarding permissions and services etc.

finally done with the Dialog instance insallation (finished successfully).

after starting the MMC (management console) i'm not able to see "message server"

after a few mins "dispatcher" will stop. resulting the MMC in to yellow colour.

in Main SAP server, i'm not able to read the profile parameters in "RZ10".

i request you to suggest me in integrating to SAP MAIN Server.

i.e.... is there any RFC connections to be maintained. so, that it will get added to main SAP server.

server details:-

both Central Instance and DATAbase instance on same host (main SAP server).

running on SUSE linux, and SAP ECC 5.0, ORACLE (9.2.0). sid(XYZ)num(00).

Dialog server on Windows server.

1*installed Oracle client, established connection to main server (able to see all the content)

2*maintained Same SID name for Dialog instance, instance number is changed. sid(XYZ)num(09).

Request you to guide me in this configuration.

tried for installation guide in SAP marketplace, but could not able to find.

thanking you in anticipation.

Best regards,

Raghav

Accepted Solutions (1)

Accepted Solutions (1)

markus_doehr2
Active Contributor
0 Kudos

As always - if systems are not starting check

dev_disp

dev_w0

--

Markus

Former Member
0 Kudos

HI Marcus,

request you to have a check on my file......

-


trc file: "dev_disp", trc level: 1, release: "640"

-


Sun Dec 16 19:25:56 2007

kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)

length of sys_adm_ext is 312 bytes

systemid 560 (PC with Windows NT)

relno 6400

patchlevel 0

patchno 43

intno 20020600

make: multithreaded, ASCII

pid 2004

***LOG Q00=> DpSapEnvInit, DPStart (18 2004) [dpxxdisp.c 1100]

shared lib "dw_xml.dll" version 43 successfully loaded

shared lib "dw_xtc.dll" version 43 successfully loaded

shared lib "dw_stl.dll" version 43 successfully loaded

shared lib "dw_gui.dll" version 43 successfully loaded

Sun Dec 16 19:26:00 2007

      • WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds

***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]

MtxInit: -2 0 0

DpSysAdmExtInit: ABAP is active

DpSysAdmExtInit: JAVA is not active

DpShMCreate: sizeof(wp_adm) 1656 (828)

DpShMCreate: sizeof(tm_adm) 2219848 (11044)

DpShMCreate: sizeof(wp_ca_adm) 18000 (60)

DpShMCreate: sizeof(appc_ca_adm) 6000 (60)

DpShMCreate: sizeof(comm_adm) 192000 (384)

DpShMCreate: sizeof(vmc_adm) 0 (320)

DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)

DpShMCreate: SHM_DP_ADM_KEY (addr: 04270040, size: 2500448)

DpShMCreate: allocated sys_adm at 04270040

DpShMCreate: allocated wp_adm at 042717A8

DpShMCreate: allocated tm_adm_list at 04271E20

DpShMCreate: allocated tm_adm at 04271E48

DpShMCreate: allocated wp_ca_adm at 0448FD90

DpShMCreate: allocated appc_ca_adm at 044943E0

DpShMCreate: allocated comm_adm_list at 04495B50

DpShMCreate: allocated comm_adm at 04495B68

DpShMCreate: allocated vmc_adm_list at 044C4968

DpShMCreate: system runs without vmc_adm

DpShMCreate: allocated ca_info at 044C4990

DpShMCreate: allocated wall_adm at 044C4998

Sun Dec 16 19:26:01 2007

MBUF state OFF

EmInit: MmSetImplementation( 2 ).

<ES> client 0 initializing ....

<ES> InitFreeList

<ES> block size is 1024 kByte.

Using implementation flat

<EsNT> Memory Reset disabled as NT default

<ES> 501 blocks reserved for free list.

ES initialized.

rdisp/http_min_wait_dia_wp : 1 -> 1

***LOG Q0K=> DpMsAttach, mscon ( CCDDEV) [dpxxdisp.c 9736]

CCMS: Initalizing shared memory of size 40000000 for monitoring segment.

CCMS: start to initalize 3.X shared alert area (first segment).

Release check o.K.

MBUF state PREPARED

MBUF component UP

DpMBufHwIdSet: set Hardware-ID

***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]

Sun Dec 16 19:26:41 2007

      • ERROR => W0 (pid 1728) died [dpxxdisp.c 12187]

      • ERROR => W1 (pid 1156) died [dpxxdisp.c 12187]

my types changed after wp death/restart 0x81 --> 0x80

      • DP_FATAL_ERROR => DpWPCheck: no more work processes

      • DISPATCHER EMERGENCY SHUTDOWN ***

increase tracelevel of WPs

killing W0-1728 (SIGUSR2)

      • ERROR => DpWpKill(1728, SIGUSR2) failed [dpxxtool.c 2468]

killing W1-1156 (SIGUSR2)

      • ERROR => DpWpKill(1156, SIGUSR2) failed [dpxxtool.c 2468]

NiWait: sleep (10000 msecs) ...

NiISelect: timeout 10000 ms

NiISelect: maximum fd=1617

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Dec 16 19:26:51 2007

NiISelect: TIMEOUT occured (10000 ms)

dump system status

Workprocess Table (long) Sun Dec 16 13:56:51 2007

========================

No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table

-


0 DIA 1728 Ended no 1 0 0

1 DIA 1156 Ended no 1 0 0

Dispatcher Queue Statistics Sun Dec 16 13:56:51 2007

===========================

--------


+
+

+

+
--


+

Typ

now

high

max

writes

reads

--------


+
+

+

+
--


+

NOWP

0

3

2000

14

14

--------


+
+

+

+
--


+

DIA

6

6

2000

6

0

--------


+
+

+

+
--


+

UPD

0

0

2000

0

0

--------


+
+

+

+
--


+

ENQ

0

0

2000

0

0

--------


+
+

+

+
--


+

BTC

0

0

2000

0

0

--------


+
+

+

+
--


+

SPO

0

0

2000

0

0

--------


+
+

+

+
--


+

UP2

0

0

2000

0

0

--------


+
+

+

+
--


+

max_rq_id 15

wake_evt_udp_now 0

wake events total 11, udp 10 ( 90%), shm 1 ( 9%)

since last update total 11, udp 10 ( 90%), shm 1 ( 9%)

Dump of tm_adm structure: Sun Dec 16 13:56:51 2007

=========================

Term uid man user term lastop mod wp ta a/i (modes)

Workprocess Comm. Area Blocks Sun Dec 16 13:56:51 2007

=============================

Slots: 300, Used: 2, Max: 2

--------


+
+
--


+

id

owner

pid

eyecatcher

--------


+
+
--


+

0

DISPATCHER

-1

WPCAAD000

1

DISPATCHER

-1

WPCAAD001

NiWait: sleep (5000 msecs) ...

NiISelect: timeout 5000 ms

NiISelect: maximum fd=1617

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Dec 16 19:26:56 2007

NiISelect: TIMEOUT occured (5000 ms)

Shutdown server ...

DpJ2eeDisableRestart

DpModState: buffer in state MBUF_PREPARED

NiBufSend starting

NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete

MsINiWrite: sent 110 bytes

MsIModState: change state to SHUTDOWN

DpModState: change server state from STARTING to SHUTDOWN

Switch off Shared memory profiling

ShmProtect( 57, 3 )

ShmProtect(SHM_PROFILE, SHM_PROT_RW

ShmProtect( 57, 1 )

ShmProtect(SHM_PROFILE, SHM_PROT_RD

DpWakeUpWps: wake up all wp's

Stop work processes...

Stop gateway

killing process (1704) (SOFT_KILL)

Stop icman

killing process (2788) (SOFT_KILL)

Terminate gui connections

[DpProcDied] Process lives (PID:1704 HANDLE:1588)

waiting for termination of gateway

NiWait: sleep (1000 msecs) ...

NiISelect: timeout 1000 ms

NiISelect: maximum fd=1617

NiISelect: read-mask is NULL

NiISelect: write-mask is NULL

Sun Dec 16 19:26:57 2007

NiISelect: TIMEOUT occured (1000 ms)

[DpProcDied] Process died (PID:1704 HANDLE:1588)

[DpProcDied] Process died (PID:2788 HANDLE:1580)

DpHalt: cancel all lcom connections

MPI CancelAll 2 -> 0

MPI DeleteAll 2 -> 0

NiIMyHostName: hostname = 'apps1'

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0

DpConvertRequest: net size = 163 bytes

NiBufSend starting

NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete

MsINiWrite: sent 562 bytes

send msg (len 110+452) to name -, type 4, key -

detach from message server

***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]

NiBufSend starting

NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete

MsINiWrite: sent 110 bytes

MsIDetach: send logout to msg_server

MsIDetach: call exit function

DpMsShutdownHook called

NiSelClear: removed hdl 3 from selectset

MBUF state OFF

AdGetSelfIdentRecord: > <

AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0

blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/2

LOCK WP ca_blk 2

make DISP owner of wp_ca_blk 2

DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 21)

MBUF component DOWN

NiBufClose: clear extensions for hdl 3

NiBufSetStat: bufstat of hdl 3 changed from OK to OFF

NiICloseHandle: shutdown and close hdl 3 / socket 1592

MsIDetach: detach MS-system

EsCleanup ....

***LOG Q05=> DpHalt, DPStop ( 2004) [dpxxdisp.c 8495]

Good Bye .....

Former Member
0 Kudos

please have a check on WP_0 log.

-


trc file: "dev_w0", trc level: 1, release: "640"

-


*

  • ACTIVE TRACE LEVEL 1

  • ACTIVE TRACE COMPONENTS all, M

*

B

B Sun Dec 16 19:26:01 2007

B create_con (con_name=R/3)

B Loading DB library 'C:\usr\sap\CCD\D18\exe\dboraslib.dll' ...

B Library 'C:\usr\sap\CCD\D18\exe\dboraslib.dll' loaded

B Version of 'C:\usr\sap\CCD\D18\exe\dboraslib.dll' is "640.00", patchlevel (0.39)

B New connection 0 created

M systemid 560 (PC with Windows NT)

M relno 6400

M patchlevel 0

M patchno 43

M intno 20020600

M make: multithreaded, ASCII

M pid 1728

M

M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1728) [dpxxdisp.c 1160]

I MtxInit: -2 0 0

M DpSysAdmExtCreate: ABAP is active

M DpSysAdmExtCreate: JAVA is not active

M DpShMCreate: sizeof(wp_adm) 1656 (828)

M DpShMCreate: sizeof(tm_adm) 2219848 (11044)

M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)

M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)

M DpShMCreate: sizeof(comm_adm) 192000 (384)

M DpShMCreate: sizeof(vmc_adm) 0 (320)

M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)

M DpShMCreate: SHM_DP_ADM_KEY (addr: 04270040, size: 2500448)

M DpShMCreate: allocated sys_adm at 04270040

M DpShMCreate: allocated wp_adm at 042717A8

M DpShMCreate: allocated tm_adm_list at 04271E20

M DpShMCreate: allocated tm_adm at 04271E48

M DpShMCreate: allocated wp_ca_adm at 0448FD90

M DpShMCreate: allocated appc_ca_adm at 044943E0

M DpShMCreate: allocated comm_adm_list at 04495B50

M DpShMCreate: allocated comm_adm at 04495B68

M DpShMCreate: allocated vmc_adm_list at 044C4968

M DpShMCreate: system runs without vmc_adm

M DpShMCreate: allocated ca_info at 044C4990

M DpShMCreate: allocated wall_adm at 044C4998

X EmInit: MmSetImplementation( 2 ).

X <ES> client 0 initializing ....

X Using implementation flat

M <EsNT> Memory Reset disabled as NT default

X ES initialized.

M

M Sun Dec 16 19:26:02 2007

M calling db_connect ...

C Got ORACLE_HOME=C:\oracle\ora92 from environment

C Client NLS settings: AMERICAN_AMERICA.WE8DEC

C Got TNS_ADMIN=
ccddev\sapmnt\CCD\SYS\profile\oracle from environment

C Logon as OPS$-user to get SAPCCD's password

C Connecting as /@CCD on connection 0 ...

C Attaching to DB Server CCD (con_hdl=0,svchp=040D30BC,svrhp=040D3C94)

C Starting user session (con_hdl=0,svchp=040D30BC,srvhp=040D3C94,usrhp=040DC474)

C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017

[dboci.c 3720]

C *** ERROR => CONNECT failed with sql error '1017'

[dbsloci.c 9750]

C Try to connect with default password

C Connecting as SAPCCD/<pwd>@CCD on connection 0 ...

C Starting user session (con_hdl=0,svchp=040D30BC,srvhp=040D3C94,usrhp=040DC474)

C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017

[dboci.c 3720]

C *** ERROR => CONNECT failed with sql error '1017'

[dbsloci.c 9750]

B ***LOG BY2=> sql error 1017 performing CON [dbsh#2 @ 1200] [dbsh 1200 ]

B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dbsh#2 @ 1200] [dbsh 1200 ]

B ***LOG BY2=> sql error 1017 performing CON [dblink#1 @ 419] [dblink 0419 ]

B ***LOG BY0=> ORA-01017: invalid username/password; logon denied [dblink#1 @ 419] [dblink 0419 ]

M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1269]

M in_ThErrHandle: 1

M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9413]

M

M Info for wp 0

M

M stat = 4

M reqtype = 1

M act_reqtype = -1

M rq_info = 0

M tid = -1

M mode = 255

M len = -1

M rq_id = 65535

M rq_source = 255

M last_tid = 0

M last_mode = 0

M int_checked_resource(RFC) = 0

M ext_checked_resource(RFC) = 0

M int_checked_resource(HTTP) = 0

M ext_checked_resource(HTTP) = 0

M report = > <

M action = 0

M tab_name = > <

M

M *****************************************************************************

M *

M * LOCATION SAP-Server apps1_CCD_18 on host apps1 (wp 0)

M * ERROR tskh_init: db_connect

M *

M * TIME Sun Dec 16 19:26:02 2007

M * RELEASE 640

M * COMPONENT Taskhandler

M * VERSION 1

M * RC 13

M * MODULE thxxhead.c

M * LINE 9589

M * COUNTER 1

M *

M *****************************************************************************

M

M PfStatDisconnect: disconnect statistics

M Entering TH_CALLHOOKS

M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP

M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]

M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]

M Entering ThSetStatError

M Entering ThReadDetachMode

M call ThrShutDown (1)...

M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1728) [dpnttool.c 357]

thanking you in anticipation.

best regards, by

raghav

former_member433984
Active Contributor
0 Kudos

I think there is a problem connecting with OPS$ account to your Unix DB. Logon under <SID> adm on Windows host and check if you success following command:

sqlplus /nolog

connect /@<sid>

if not, see note 400241 for fixing

Former Member
0 Kudos

Hi Experts,

request you to help me in integrating the Windows aplication server to SAP running with Oracle 9.2 on SuSE Linux.

request you to have a [look on this file.|http://www.mediafire.com/?6eyydbwzwxt]

thanking you in anticipation

best regards,

by

raghav

markus_doehr2
Active Contributor
0 Kudos

Did you create the OPS$-users for the application servers and assign them the specific role?

Markus

Former Member
0 Kudos

Hi Markus,

Can you guide on this OPS$- users for the application server and assiging specific role. (had gone the note 400241, i don't had any problem local, i.e... on server ... the users mentioned in note are connecting to oracle)

request you to advice on the steps tht i have to follow after creation of OPS$ users for Application users.

if any SAP market place Document avalibale means... plz let me know.

i can down load.

thanking you in anticipation,

by

raghav

markus_doehr2
Active Contributor
0 Kudos

You need to set up the OPS$ for all machines connecting.

So you will need to create (as you did for your database system/CI) an OPS$APPS2\SAPServiceCCD and assign the appropriate roles. The mentioned note is the right one.

Markus

Answers (0)