S4Cloud: Adobe Form - custom field hardcoded text not displayed on output

[KatjaS]

Dear Expert Community,

I have an Adobe output form (DEBIT MEMO) in S4Hana public cloud where I have added a field. The field is visible/invisible on the printout as expected, but the hardcoded value of the field remains empty / doesn't display. The caption of the field is correctly displayed (or not) as prompted by the conditions, proving that the active/inactive conditions work correctly. Just the value of the field doesn't get displayed.

The active/inactive condition of this field, as well as the hardcoded value, are controlled by a piece of java code as shown below (in the below, the real Partner number is replaced by XXXXXX):

<script contentType="application/x-javascript">if(this.parent.Partner.rawValue =="XXXXXX") {this.rawValue =="TEST"}; else
{
this.presence = "inactive";
}
</script>

What could be the reason and what could be done? 

Best regards,

Katja

[junwu]

this.rawValue =="TEST". you have to remove one =

== is for comparison, = is for assignment

[KatjaS]

Hello Junwu, I tried with one =, but it didn't change the outcome. Also, I tried with 3 x ===, but it didn't change the outcome either. On this site Java Operators it says == means equal to, but if you say there's a difference between comparison and assignment purposes, I'll start keeping it in mind, thanks! Meanwhile, I also made the field invisible and then visible again, and made a test print of both cases, to confirm that the field is responsive to changes. Confirming that it is.

[KatjaS]

Sorry, the Java Operators URL didn't get printed; not sure if I can paste it as URL here, but I'll try: https://www.w3schools.com/java/java_operators.asp:

[junwu]

don't know what you are talking. do you have any general programming experience? don't blindly talk about = == ===, the palce you need comparison, you use ==, when you want to assign a value to a variable, you use =.

[junwu]

and the coding here is javascript, not java

[KatjaS]

Thanks for pointing that out Junwu. You are right, I have very limited or basic programming experience and hardly any formal training in it, so pardon my vocabulary. I'm learning by doing. So far, I have managed to get most of our output management changes up and running, but this one I can't figure out. I'm not sure it relates to the javarscript or if it could be some other type of issue.

[junwu]

post your latest code, let's see what is going on.

[KatjaS]

Do you mean all code from the whole output form template, or just from this field? The full code is obviously long and could contain sensitivities. Here below is all code from that particular field (with the customer code partly censored). Most of it is copied from another field, but the field name, the caption and the piece of javascript are specific to this field. </field> <field name="CustomerVATRegistrationCH" w="150mm" h="6.15mm"> <ui> <textEdit> <border presence="hidden"/> <margin/> </textEdit> </ui> <font size="9pt" typeface="Calibri"/> <margin topInset="1mm" bottomInset="1mm" leftInset="1mm" rightInset="1mm"/> <para vAlign="middle"/> <caption reserve="60mm"> <para vAlign="middle" spaceAbove="0pt" spaceBelow="0pt" textIndent="0pt" marginLeft="0pt" marginRight="0pt"/> <value> <text xliff:rid="A047A429-4532-493D-8F02-BB7E1BC7EFB9">VAT No.CH:</text> </value> <font size="9pt" typeface="Calibri" weight="bold" baselineShift="0pt"/> </caption> <border> <edge presence="hidden"/> <corner/> <corner presence="hidden"/> <corner/> <corner presence="hidden"/> </border> <bind match="none"/> <event activity="initialize" name="event__initialize"> &lt;script contentType="application/x-javascript">if(this.parent.Partner.rawValue =="100XXX") {this.rawValue ="TEST";} else { this.presence = "inactive"; } &lt;/script&gt; </event> <value> <text maxChars="20"/> </value> </field>

[KatjaS]

Unfortunately, I can't get it pasted with formatting

[junwu]

do you know what is code????

[KatjaS]

This is S4Hana public cloud. This is all code (xml, javascript) I can get to. As said, I'm not familiar with programming jargon and I realize I don't use it correctly.

[FabienneSchiesser]

relax... that's okay, we all started with everything at some point 😉 I will try reproducing this case. I'm not that familiar with Javascript coding in Adobe Forms, but, based on my experience, the little things are the things that cause the error.. I need some time, I hope you find the error before that, let's see 😄

[KatjaS]

It may have been misleading of me to post the piece of javascript in the first place, because I don't know if that's what causes the problem. It was as FYI. The problem is that the hardcoded value doesn't get displayed.

[FabienneSchiesser]

Do you have a Screenshot from the dataelement in the livecycle designer with all the needed information? If it runs through the if statement in the javascript I don't think there is a problem with the element itself, but who knows. Maybe you can have a look into the link i sent you -> Scripting basics.

[KatjaS]

Thanks a million Fabienne; I can't check it today anymore but will get back to this tomorrow. I suppose you mean the data binding for the "Partner", which is present elsewhere in the form, but I'll further check tomorrow.

[KatjaS]

Hello Jennifer - I can't paste a screenshot here, or don't see how. The Payer party referred to in the piece of script is derived from a field in an underlying subform. It comes from data binding <bind match="dataRef" ref="$.PayerParty.Partner"/>.

[FabienneSchiesser]

Hi Katja, hm, you are not working with the Adobe Livecycle Designer? I don't know how it works exactly in the Public Cloud. I am using the designer. I created a textfield on my own and had a look at the XML coding. So the assignement with this.rawValue should work... your textfield is shown, isn't it? So it is not always hidden? But the hidden logic is working, correct? Just the assignement of the value doesn't work? The fieldlength is enough?

[KatjaS]

Hi Jennifer - I am working with Adobe Lifecycle Designer. After editing, I save and upload the reworked template back to S4Hana Cloud and test. My text field is indeed shown when the condition of finding the Payer is met, and the field is inactive when this condition is not met. So the field logic seems to function as expected. The field length is enough, it's 20 characters. I have also tried making the border of the field visible so I can confirm that not only the caption, but also the rest of the field is displayed. I confirm this is the case. It all displayes as one big field and not two fields (1 caption, 1 value), but I believe this is correct. It's identical with the properties of the other surrounding fields which work fine. So, does your work confirm that it's not the javascript that causes this?

[FabienneSchiesser]

Hi Katja, good question.. I made a little Adobe form with just one textfield and the assignement via Javascript.. that works fine for me:

<?xml version="1.0" encoding="UTF-8"?>
<?xfa generator="AdobeLiveCycleDesigner_V11.0.9.20230422.1.42_SAP" APIVersion="3.6.23111.0"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" timeStamp="2025-04-23T07:31:33Z" uuid="624e300a-56fe-4812-bfb9-020e615f49ec">
<template xmlns:xliff="urn:oasis:names:tc:xliff:document:1.1" xmlns="http://www.xfa.org/schema/xfa-template/3.3/">
<?formServer defaultPDFRenderFormat acrobat10.0dynamic?>
<subform layout="tb" locale="de_DE" name="data" restoreState="auto">
<pageSet>
<pageArea id="Page1" name="Seite1">
<contentArea h="284.3mm" w="197.3mm" x="0.25in" y="0.25in"/>
<medium long="297mm" short="210mm" stock="a4"/>
<?templateDesigner expand 1?></pageArea>
<?templateDesigner expand 1?></pageSet>
<subform h="284.3mm" w="197.3mm">
<field h="9mm" name="Test" w="62mm" x="57.15mm" y="79.375mm">
<ui>
<textEdit>
<border>
<edge stroke="lowered"/>
</border>
<margin/>
</textEdit>
</ui>
<font typeface="Arial"/>
<margin bottomInset="1mm" leftInset="1mm" rightInset="1mm" topInset="1mm"/>
<para vAlign="middle"/>
<caption reserve="18.0838mm">
<para vAlign="middle"/>
<value>
<text xliff:rid="7175D1FB-772F-4459-94CD-FD4DAE9583F4">Textfeld</text>
</value>
</caption>
<bind match="none"/>
<event activity="initialize" name="event__initialize">
<script contentType="application/x-javascript">this.rawValue = "TEST";

</script>
</event>
</field>
<?templateDesigner expand 1?></subform>
<proto/>

[KatjaS]

Hi Fabienne - I finally did find the reason. This probably comes down to inexperience with xml. My field where the issue occurs resides in a subform, lets call it "Subform1". The field "Partner", which my field checks with, resides in another subform, let's call it "Subform2". Both subforms reside under the same main form, but "Subform1" isn't a parent to "Subform2". "Subform2" is hidden. I haven't yet studied the link you provided (not fluent enough in German, so it'll take some time), but I suppose my if(this.parent...) didn't work this way. When I moved the "Partner" data binding into "Subform1", it did work. It's confusing though that we have numerous other fields that also fetch data from "Subform2", and which are organized similarly in relation to "Subform2" as my field is, but which don't have the same issue. I have faced this often enough to have checked it in the past, so I still don't quite get why it was an issue now. Also, it's confusing that the logic of my field still clearly worked, just the value didn't get displayed. Anyhow, I thank you for your time and patience, for the very useful link and for validating that it wasn't the piece of javascript that caused it. That pushed me re-checking assumptions I already thought I had checked before.