[Error during Export] R3load exited with return code 11

[former_member229542]

Hi guys,

While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package

ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline

REGUC.log details:

(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)

/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052

/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error

(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is  not  7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW  = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW  = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
  "
(GSI) INFO: vname    = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname  = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release  = "5.10"
(GSI) INFO: version  = "Generic_142900-13"
(GSI) INFO: machine  = "sun4u"

Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.

Any hint of what is causing this error?

(Please disregard any Filesystem issues since all of them have available space)

Best!

[former_member182657 · Accepted solution]

Hi Martin,

Kindly check for SAP Notes  559715 - Termination of the table conversion in step 5 and  89384 - Checking cluster tables with R3check

May the issue related with cluster table conversion.

Regards,

Gaurav

[former_member229542 · Accepted solution]

Hi Gaurav, thanks for your comments

I did a check on the logical table (REGUP) of the physical CLuster table (REGUC), nevertheless R3check returned just a  message with no errors found

This is R3check version 6.24 (release 740 - 08.07.13 - 20:13:05 ).

SAP myCluster Technology (dbcheckclu - Jul 23 2013 - 22:15:34).
Current time is 02.06.2014 15:27:38,48h GMT.

R3check finished (0000).

Also, before Unicode Conversión,, there is a report for validation of Cluster Tables and it did not return any errors.

Any suggestions?

[former_member182657 · Accepted solution]

Hi Martin,

I also suggest you to please visit SCN thread

and perform steps as suggested by @Yasir Gazdar

Hope this thread will help you.

Regards,

Gaurav

[former_member182657]

Hi Martin,

After kernel update if you still faces issue then try to check with SAP Note  876984 - R3load during export SAPCLUST abort with core dump ,may this note can provide you some solution.

Regards,

Gaurav

[former_member229542]

Hi Gaurav,

I have updated R3load with latest patch for Kernel 7.40 NUC, and it keeps dumping a core file

In the Export Directory, you can see how REGUC.001 file is created and when it reachs around 1GB, its stops and creates the core file

I couldnt find further information regarding this error, than updating R3load file

Any Idea?

Thanks!

[former_member182657]

Hi Martin,

Please follow SAP Note 991401 and link http://sapbasisguys.blogspot.in/2012/07/sap-basis-error-during-unicode.html

Regards,

Gaurav

[former_member229542]

Hi Gaurav, thanks for that info

on REGUC.LOG file there is no error messages indicating an inconsistency. It just mentions an RC=11 and no further information; its kinda a weird error.

I opened a SAP Incident, so im waiting for their answer.

I will try to increase trace level of R3load, to see if i find further details

[former_member182657]

Hi Matin,

It seems best to open an incident with SAP now.Please share the solution after getting response from SAP.

Regards,

Gaurav

[former_member229542]

After using latest R3load patch, it provides furher information on the log file.

-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is  not  7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW  = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW  = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
                                                           "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ecp                                                             "
(GSI) INFO: sysname  = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release  = "5.10"
(GSI) INFO: version  = "Generic_142900-13"
(GSI) INFO: machine  = "sun4u"
(GSI) INFO: instno   = "6120023288"

(RTF) ########## WARNING ###########
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases

(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0
-------------------------------------------------

[former_member182657]

Hi Martin,

In regards

INFO: environment variable "I18N_POOL_WIDTH"  and (RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env

Could you please check SAP Note 738858 - R3load for Unicode conversion

Regards,

Gaurav

[former_member229542]

Hi Gaurav, thanks for that Note, it provides helpful info related Unicode Conversion, but still none of them applies to the issue I'm experiencing.

Those are typical informative message, but still log file is not showing any error, just a core dump file.

Still waiting from SAP Support; as soon I have any information, i will post it here.

Best!    

[former_member185239]

Hi Martin,

Use the latest R3laod patches as this might contains a program error

With Regards

Ashutosh Chaturvedi

[former_member229542]

Hi Ash,

Kernel is pretty up-to-date, so i will try to update to latest version, and see if that works.

Best!

[S_Sriram]

Hi Martin

Could you paste the SAPINST.log

BR

SS

[former_member229542]

Hi SS, at that point of the Export, SAPINST.log does not provide with up-to-date logs, everything is being written on the export monitor log.

Best!