SAP for Utilities Discussions

Resolved! Configuration steps for Service notificationa and service order

Hi,Can anybody help me to get the configuration steps for1. Service Notification2. Service OrderRegards,Tushar

RE: how to use Business object in program

Hi,Can anybody let me know how I can use the BO ISUSMNOTIF having Method CREATEBYNOTIFCODE in my program.Please let me know the procedure for the same.Sarang

Resolved! SD / ISU billing

Hi gurus..i have a SD billing document, that document should appear in my ISU (while doing invoice)..for this whats the procedure?thanks..

Create Exteranl POD ID (Point Of Delievery)

Hi ,What is the process to create a External POD ID for a utility Installation .Do we need any special configurations or can we do with standard application ? .Thanks & Regards,Rkumar

Resolved! Dependency between objects

HI Friends,In IS-U , I have found three objects in Network graphic, for the Archiving object CA_BUPA.The objects are CACS00_CASCACS00_DOCCACS_CTRT.Whether it is needed to finish archiving of these three objects before I finish CA_BUPA.Can any one g...

Resolved! finding archiving objects

HI all,I need to do the archiving for the follwoing table in this week end. CRMD_ORDERADM_HCRMD_ORDERADM_IEein (incoming documents)Eaus (outgoing documents). But I dont find any objects for these tables. How to find the archiving objects for these ...

Resolved! Prerequisite check in a new client?

Hello,Is there any prerequisite check to ensure the installation is proper in a new client before starting customization for CIC and DM?JACK

Help

Hi all,Anyone having any hints where can I find commonly asked questions or 'interview' question in relation to "ISU" or "ISU Billing" (to be specific)?I am new to this domain and hence, wanted to start off with questions that are generally asked or ...

EBW_DQ_SS - mass activity issue

Hi,When running this EBW_DQ_SS , we have found out for certain parameters, values are not getting populated in the BE Delta queue.How to find out the exits or badi's associated with this transaction ?what are the tables this particular transaction ...

street light billing

Hi ..in street light billing we have two options like "entry value" and "value to be billed"what does it mean? whats the values we have to enter,? whats the use of this?except help document matter, can any one explain in general terms and senario,tha...

Unexpected termination in variant QUANTI01 in schema

Hi,I was changing some components of the bill from a 1 line item change to a Seasonal Charge i.e. Summer and Winter. I did this for various Rate Cat., this is the last one for which i am experiencing this error message. It errors out in the billing s...

Resolved! RE tutorial for emigall

Hi all,please can any body give me tutorial for emigall explained with example.thanks,sarang

Resolved! Error in EA10..

While creating mass bills through EA10, only first bill is processed..it is giving me following error..."Formal error in table FKKOP: Item numbering is inconsistent"DiagnosisThe line item numbering is incorrect. The items must be numbered in ascendin...

Disable Address Check

Hi,I am trying to change the address of the Connection object through a Function Module using BDC of the transaction Code ES57. Issue is that on the screen of ES57 there is a subscreen which internally does the Address Validation and a pop up is disp...

Resolved! emigall

could any one send me emigall documents.govindachari2337 at gmail dot com

Resolved! ISU refrence customer in SD?

Hi,iam not getting the "refcustomer" option in my fpp1-> identification tab?how to get this..can any one tel the complete procedure?thanks...

invoicing

REAABR00SIBI this is program for individual billing .(transaction: easibi) could any one please tel me what r the fields required for getting invoicing in dis program.kindlyEdited by: GOVINDA CHARY on Sep 25, 2008 8:32 AM

Resolved! RE: UNABLE TO FIND DATABASE TABLE FOR CHECK NO, IN ISU

HI, CAN ANY BODY TELL ME DATABASE TABLE FOR CHECK NO IN ISU.THANKS,SARANG

Resolved! Reports missing in transaction FPMA

Hi All, I have got one issue in FI-CA. When using transaction FPMA it is not possible to create a report which shows which documents can be cleared by the program. When I go into environment it not possible to choose anything - all possible selection...

Resolved! billing tables

hi friends ,could any one kindly post me existing billing tables in is-utilities?thanks in advance.govinda

How to configure dunning charges in Contract Accounting IS-Utilities

Hi All,Can anyone help me with this:How to configure and run Dunning Procedure in Contract Accounting in IS-U to set up late fee as dunning chargesThanks!

edm/day group issue

hi friends prince here.in edm while am creating a synthetic profile in details tab there is a input for day group.when i gave my day grp the system popus an error as followsselect the day type in the tree structureand the notes for th...

Error in Move-out reversal

Hi,Could anyone please tell me how can we reverse a move-out case in which we are finding an error message "Record 12 7 not found in table BCONTA" and "Message no. R2033".We are trying to reverse move-out case by using transaction code EC58E.Thanks ...

Dataflow in Action box configuration

Hello,I would like to know about the Dataflow in Action box configuration in detail.How to maintain it?Regards, JACK

Resolved! FI_CA: Function FKK_OPEN_ITEM_SELECT_WITH_DATE

Hi guys, I want to use the FM FKK_OPEN_ITEM_SELECT_WITH_DATE to retrieve the open items of an contract account, but I'm not sure about the function of the flags I_WITH_INSTPLN and I_ALLITEMS.Could anyone explain a little about the behavior of the FM ...

FI_FICA

HI Friends,I need to do ARchiving in the objects FI_FICA and FI_MKKDOC. i am getting the following errors in both.1. FI_FICA.Its not allowing me create the variant for the write program BUSOBARCH .when I try to create the variant I am getting error ...

Resolved! Implausible meter reading flag-table/field

Hi Is there any flag goes into the DB against implausible meter reading against any business/technical master data, please specify the table/field if known.Gaurav Upadhyaya

Resolved! edm /distributor creation

hi friends in edm when am creating pod we need to specify the grid..so i used t code in inter company data exchange to create gridbut while we r creating grid we need to enter distributir data..where can i create a distributor in utilit...

Reg bill & rental bill seanrio

Hi ..I have to bill for the following senario..plz share u r opinions...how to bill for this senario..i have to bill the customer for periodicbill and along with that the utility provider is giving a light for rent, ..so in my final bill it should sh...

Resolved! Code to Upload Device Category and Register Groups

Hi,Can any one help in developing the code to upload Register Groups and Device Category in ISU as they are not available in the standard Emigall application. Also if you can share a code relevant to this, then it would really grateful of you as I ha...

Maintian an application form

Hi all, I have a requirement to maintain/change an existing application form .The form class is IS_U_WA_ORDER_DOWNLOAD.I need a step by step tutorial/example how to do that.This is my first project using application form.What is the relation with sap...

Resolved! how to pull a value from installation facts to rate?

Hi,I have a tariff in which I have to bill a Fixed charge for a consumer based on his Connected LoadPlease help me in how to maintain the connected load in Installation Fact.Also, how to use this value in installation fact in rate configuration?Thank...

Resolved! End date of a budget bill plan

Is there any way to change/determine the end date of a budget bill plan other than the standard SAP way of determining that? Currently SAP defaults it to one year end date if I don't put any alternate start month at the time of creation. I want to kn...

Resolved! Fix Wrongly Assigned Device to a Device Category via EG44

Hi, I wrongly Created a Device in a Device Category Axxx via EG44. This Device already exists in another Device Category Bxxx. I don't see an option to delete the Device from the Device Category Axxx. Does anybody know how to do this? Thank you! NR

Integrating Workorder in CIC screen?

Hello,1. I would like to integrate the Workorders in the CICO Screen. Where it should be done? In Action box? 2. Following are the work orders need to be used.- Field Verification - Meter Removal- Meter Installation- Disconnection- Reconnection- Mete...

Resolved! send profiles (edm)

hi friends in help.sap its given in edm that we can send profiles in utilitiesedm-send profiles..but id nt find eiter in spro or in easy access .i would like to know the tcode of that path if any 1 has got it..am using ecc6.i hope it m...

Resolved! Dump while creating Move-In and Move-Out

Hi Gurus , Getting a dump while creating Move-In and Move-Out .Getting syntax error in the following program SAPLXEMDBP003 . "Incorrect Nesting : Before the statement "Module", the structure Introd".The problem here is that in program SAPLES01 the d...

Resolved! How to ignore Estimated reads for MR Validation

HiI havea specific requirement for carrying out MR Validations - Can I specifically ignore all the estimated reads from the reading history? And only check the current consumption against the consumption in a period between two Actual reads?Any other...

Rate Change - Block

Hi, If the customer is on a Rate Category AAA and due to his heavy usage automatically switch to Rate BBB, now the requirement is that if this happens, the customer should be blocked automatically from switching back over to Rate category AAA again....

FPP1 / XDO2 / BP Relation

Hi Experts..I created a BP through FPP1 , but iam not getting this BP in XD02(SD).so can any one explain complete customaization from spro.. i allocated ref customer in customization...but its not effecting..plz explain me complete process to get th...

EDM profile allocation

hi friends in edm while performing profile allocation am facing a problemin profile allocation step we need to specify the register which has the interval length identical to that of the profiles interval legth.my interval length both ...

Changes in standard screen of EG44(Device info record)

Hi,I have to add some fields in other device data of Device Tab of the standard screen of EG44 as per the client requirement. Can you please help me how to do that.Regards,Mukesh Kumar

Resolved! SAP in Power sector

Hi, This is Rama Murthy.P I am an ABAP consultant, I did my masters in Electrical Engineering. Please tell me wether is any scope for SAP in Power sector if yes. What are the prerequisits, I mean what preliminary knowledge must one have to become a...

Resolved! Work Order?

Hello,The client requirement is to generate work order for some cases such as field verification, Meter removal, meter installation, disconnection, reconnection and so on.I would like to know the following.1. Whether these work orders should come in ...

Resolved! EDM profile header

hi friends i have got an issue in profile creation in edmwhen i tried to create profile header t code eedm06 i selected the interval length as price but its asking for unit of measurement..actually it must ask only for currency..but it...

Resolved! edm

hi friends prince here..i have got a query with profile allocation in edmkindly help methe query is as followswhen i trued to allocate the profile header in profile allocation its displaying en error*You tried to allocate profile 10002 w...

Resolved! What is IS utilities?

All, What is IS utilities stands for? Is security for IS utilities/CCS is same as like R/3? Pls some body explain me clearly...

Resolved! G/L account Changed after Move In...

Dear Gurus,I had done a Move In and raised an invoice for a BP. Afterwards I had to delete the GL a/c number of Invoice Receivable a/c and assign a new G/L number.Now the invoicing cannot be reversed. It shows the Error message that Old G/L a/c does ...

EDM

hi friends prince here..can any one help me out for this issue in EDM.am in the customising phase of edm.in the mean time i tried creating a profileso i i accessed t code eedm06 and it required certain mandatory fields and i tried m...

Resolved! How to create a new name for person responsible field in a service order

Hi,Could anyone please tell me how can we insert new names(values) for person responsible field in a service order.Thanks and Regards