SAP for Oil, Gas, and Energy Discussions

Resolved! Triple point and SAP

Hi Guys,Does anyone know if the solution offered by SAP and triplepoint works under the SAP R/3 4.6C release?Thanks

Resolved! IS OIL Documents - For Ex IOG60 , IOG150 Etc

Hi All ,Can you please let me know where i can get Documents of Ex IOG60 , IOG150 Etc.Thanks and Regards Mahesh

Resolved! Blue Print Document for IS OIL IMPLEMENTATION

Please provide me Blue Print Document for IS OIL Implementation .so that i can use it as a Reference .

Resolved! New to SAP oil-is

Hi all,i am working as ABAP consultant for the last 3years.now if i learn SAP Oil-IS module will it help me for my future.regards,

Resolved! IS OIL configuration related docs

Hi Please provide me any IS OIL configuration related docs.I know the SAP help for isoiles and TSW. I just need the configuration related docs. ThanksMahesh

Resolved! Error in QCI during 561 stock upload

Hi,I am trying to post a GR using MB1C 561, while QCI calculation I am getting an error wchich says "Base temparature is not 60 F". The error is not descriptive so I am not able to figure out whats missing in config/master. Can anyone help?Regards,An...

IS OIL Training

Hi everyone,this is senthil palaniappan, a postgraduate IT engineer with one year Refinery Project experience.i have very good knowledge and exposure on Oil & Gas Industry.Also very good at Refining and Supply chain management of raw materials(crude)...

IS Oil field KNA1-OID_POREQD is not avilable inTcode XD01while BDCRecording

Hi,I am creating Customer Master data using the Call transaction XD01. The field KNA1-OID_POREQD is not visible and available in XD01 Transaction while using he SHDB Recording. I am getting error message as field KNVV-OID_POREQD does not exist in th...

Resolved! Anyone know well about IS-Oil Service Station Retailing ?

I have good experience of IS-Retail solution, now there is one project of IS-Oil Service Station Retailing, I was involved in this project, so what should I learn for this project?I have check the roadmap of IS-Oil solution, it seems I should study t...

Resolved! IS-OIL PRA.

Hi all, I am new to IS-OIL PRA. I want to start working on PRA. I want to know the flow how to start from IMG and master data.I am confused of how to start and how the data flows from different table.As of now pls can some one help me of how to...

Resolved! SKF Processing _Well Count

HiI am not clear about the processing of SKF Well Count for commingled well where there is one parent well and many child wells. It always shows only One well count for Cost allocation purposes. What is the logic behind it?

Resolved! JVA with ECC6

Hi - has anyone implemented (or migrated) JVA on(to) ECC6? What happens with Flex ledger - any funnies if we put that in. Also has anyone implemented JVA on a box that is alreafy live without JVA?cheersErica

Resolved! Delivery relevant only for TD shipment.

Hello,In an IS-OIL system, how to make the outbound delivery only relevant for TD shipment. i.e user should not be able to process it with VT01N transaction.Is this possible in IS-OIL system. If yes, please let me know the IMG settings required for ...

Resolved! Tax Tables - Data Flow

Hi I want to know how Tax related data flows from Valuation Process and then How Tax tables are populated and picked up in the report?

Resolved! hi frnds

hi sdn frnds hi i am sirisha. i wud like to learn isoil.is it good for me. is there any job opportunities are there. please let me know. with regds sirisha.

Resolved! IS Oil Configuration

Hi GuysCould you pleas elet me know whats the difference between standard R/3 and IS Oil functionality wise.Any specific difference in screen wise from standard SAP.what are main process happens in Oil industry interms of MM perspective.Any unique sc...

TD Shipment: Gain loss vs material on board

In a TD Shipment, if the entire loaded quantity is not delivered, is there always a gain/loss posted on closing the shipment? Can we have the remaining(load - discharge) quantity on board (on the vehicle), so that it can be used for delivering under ...

Resolved! IS OIL down stream course codes

Hi Everybody,I wanna know the names of courses which are helpful to learn IS OIL Downstream in SAP education.If It could be elearning or OKP courses then let me know..I want to get the training in IS OIL Downstream but i dont know the exact course na...

Resolved! How do we populate BAPI_INCOMINGINVOICE_CREATE for IS-OIL PO's

HiSince transaction MRHR is obsolete in ERP2005, we have to upgrade our programs which used this transaction. The new SAP transaction which must be used is MIRO, but it is not possible to use MIRO in BDC's. So we have to use BAPI_INCOMINGINVOICE_CREA...

Resolved! Dump while doing PRA Application on IS-OIL 4.72 on client 065

During the Application test for PRA I am getting the following run timeshort dump. ( SAP R/3 4.7 X 200 with Oracle 9.2 , IS-OIL 4.72 )1. Runtime error : Dataset_not_openException : CX_SY_FILE_OPEN_MODEError analysis : An exception occured . The excep...

Resolved! RLM - Remote Logistics Mgmt.

Background: IS-Oil & Gas already installed.We need to activate a few transaction: IMG requirement is to turn on RLM. Can anyone tell me if this feature is client dependent and I will be able to turn it back off? One of the requirements is to defi...

Resolved! SAP IS-OIL Material

Hi Respected Seniors I would like to involve myself in the SAP IS-OIL application area. Currently i am having 3+ years experience mainly in SD module and other modules such as MM, PP, and FICO. If i want to start to IS-OIL, where should i start? I n...

Resolved! Reg TSW in Oil and Gas

Hi Experts,Iam new to this Oil-Gas in SAP.Can any one tell abt TSW bussiness senario in general (not in sap).And then tell how we can map in to SAP.sumana

Resolved! Installation of the EP File System

I am installing IS-OIL 472 on R/3 . As a s post installation activity I need the file EP46CFILETMPL.CAR which provides a template that can be maintained for system requirements. ( SAP Note 382767 ) . As per the note it has to be copied from sapservX...

Resolved! Transaction STWB_1 and Test catalog for IS OIL

Cannot find Test catalogs TK IS-OIL* from transaction STWB_1 as mentioned in document Appl_Test_doc_600_1.pdf attached to SAP Note 890458I tried to do the following from Appl_Test_doc_600_1.pdf:Call transaction STWB_1 or from the SAP menu, choose: To...

Resolved! IS OIL TSW control data (activation of TSW)

I have activated IS OIL package in SAP ECC6 version, but when I try to access TSW control data screen, the screen is empty. Normaly I should find the following checkbox  TSW active Automatically close shipment External Details...

Resolved! Item quantity Tolerance limits validation in Tickets

All,We are creating nominations against Sales contract quantity schedules and we <u>have setup unlimited tolerance in the TSW details screen</u> in the contract. In the nominations, system allows us to have item quantity more than the contract sche...

Resolved! Cancellation of billing document - message OIC_SDP 008

Hello Group,We have IS-OIL(downstream) version 4.6C and doing cancellation of billing document.After saving, it gives message no.OIC_SDP 008 and not getting posted to FI.Pl.advise me.Regards,Kedar.

Resolved! How to add more comments in the Nomination Header notes tab

Short Text How to add more comments in the Nomination Header notes tab In the nomination screen, there are the tabs for header and item notes.Within each of those tabs, there are categories for the type ofcomments. Currently in the nomination maint...

Resolved! Cost of Goods Sold in IS Oil

Hi Friends,Could someone help out with what technologies/databases are being used to capture and maintain the Cost of Goods Sold? (e.g., SAP MM examples or something else) ?I am working on a downstream project for an oil major and would like to dete...

Upstream: PSC Module: Gas Production Volume & Price are in different UoM

The price is written in the contract with the BTU (UoM in Energy). However, the production is recorded in Cubic Meter. To convert from cubic meter to BTU, we use Gas Caloric Value (GCV) which is different/vary on daily basis.Do I have a way to mainta...

Resolved! Quantity Conversion Interface

Hi All!May I know where can I obtain the Correction Factor software for Asphalt/Bitumen? It seems API do not have any software to accommodate Asphalt/Bitumen.Thanks in advance.Navin

New Funcionality in ERP 6.0 Is-OIL

hi i´m looking for a compartive document about delta funcionality from R3 4.6B with Is-OIL and ECC 6.0 with Oil any clue?Regards.

Can any one help me to find the configurations for SAP IS OIL and GAS

Hi, Can any one help me to find the Configuration Steps & T Codes for SAP IS OIL and GAS moduleThanks & RegardsChandra BS

Resolved! How to automatically add Nomination Event Long Text?

We need to automatically add Nomination Event Long Text when a user creates a Nomination (O4NCN).Have tried a BADI, OIJ_NOM_DEFAULTING, but it will not allow us to add the long text without the final Nomination Technical Key (which is assigned at "sa...

Resolved! Regarding Netting

Hi,I am writing a custom program that will be attached to the transaction O3B7 (Netting Document Creation).This Output type will be attached to my program in NACE Transaction.I wish to know the standard program that I can refer to for designing my cu...

Reference client with IS-Oil Best Practices

I am trying to locate the CD to download IS-Oil best practices so our customer can create a reference client to examine the downstream exchange functionality. Has anyone successfully done this ? Or does IS-Oil come with a pre-configured client? Re...

Resolved! PO tolerance user exit

Hi,Does anybody know of a user exit to select upper PO tolerance limit? System usually selects the lower tolerance limit.Is there any other method other than user exit to do that?Thanks in advance.Regards,Arun Mohan

Resolved! OILSHL IDoc generation from schedule confirmation

Hi,I need the OILSHL Idoc to be generated from the SAP system at the time of schedule confirmation.The ALE subsystem has already been configured and tested. This includes RFC destinations, partner profiles and ALE distribution model (Working for mast...

Resolved! Tables in PRA

Hi, I want to know the tables pertaining to PRA in SAP oil and gas, preferrably the name spaces / convensions. Could somebody throw some light on this.Regards,Srila.

tables in is-oil

Hi all what are the tables and fields used in Is-oil transaction

Resolved! i want is-oil tutors and t-codes

Hi I want the Is-oil transaction codes and tutors.where can i get

Resolved! Nomination Status Profile

I was looking for what status profiles need to be maintained in a Nomination for trigerring output at line item level. Any input / pointers / document will be extremely helpful.Info on setting up Business Processes will also be greatly appreciated.Re...

Resolved! Netting in Oil Industry

Hi all,I am trying to workiout on netting process specific to oil industry.I am using netting tables : OIAQA and OIA12ICan anyone explain me the mapping between these tables?thanks in advance.

Resolved! IS-OIL-DS-TDP User exits

Hi AllDoes anyone know of a user exit that will allow for the lookup of a different value from OIH01 during a goods receipt.Mark

Standard Reports

hi what's the way to find out the standard reports in any module provided by SAP, specially i want to know in IS-U module, or any link to any website is rewarded.gaurav

Resolved! Mapping Guide

HI all,IAm working on OGSD,(Oil and GAs SEcondary Distribution)is anyone has any clue how it will caliculate the the address with Postal Address of Customers where to deliver??ThanksImran

Resolved! 04N2 - Meter Description Read-only

In transaction O4N2 I want to maintain meters for customers.The problem is that the field Meter Description (GMMTXT) is read only. Do you know what is the reason and if this can be fixed?Thank You

Licensing Issues

Hi All,I have just installed the Sneak Preview Java Full edition. As per the documentation available with the Sneak Preview (start page) the license installed is valid for 180 days which can be a typo because i have heard that the Sneak Preview have ...