SAP for Healthcare Discussions

Resolved! Patchlist for ISH / ISH.med

Hello!Where can I find a list of actual patches for ISH / ISH.med , 6.04?Hope, der is anyone, who can help me.Kind regardsJohannes

Resolved! ADDING NEW FIELD(S) IN AN EXISTING TABLE

Hello all,In our implementation, we add new doctors through transaction NG04, in table NGPA.Recently, due to legislative changes we have to also maintain two new insurance numbers for each doctor - let's call this new numbers "IN2" & "IN3". Our SAP c...

Ward Cart Inventory

Hello Experts,We are implementing SAP for hospital's supply chian. Trying to figure out how the ward carts are handeled in SAP IS-H solution? Today the business has all the items as expensed on a ward cart and they do not want to switch to make cart ...

Resolved! Create services from case-related material consumption

Hi, good afternoon...We were using trx NMM7 to make goods issues and generate de case-related service entry, but...after our Upgrade Support Package it doesn't work any more .We are now in Stack17 (ISH with MX localization).Some body knows any note o...

Resolved! HCM Transceiver

Hi,i sthere still a IS HCm Transceiver?We found it in older notes but is it still up to date?Thanks Jan

NMM7 dump while use Print Material Requisition

Hi, every body...We have upgrade our ECC600 system to Support Package Stack No. 17.After this,when we try to print the Material Requisition from trx NMM7 - IS-H: Maintain Case-Rel. Goods Issue arise the following Dump.Is there any SAP note to correct...

badis for is-h

Dear All,Is it possible to know the badis for the following userexits. As User exits are in different sap version(4.0) and we have to locate the respective badis for these listed exits in another sap version(ecc 6.0)EXIT_RNAANZ01_001 -EXIT_RNAANZ01_0...

MESSAGE_TYPE_X entering NWP1

Hi All! Due to an error, a view from NWP1 has been deleted (hide view). After that, when some users starts that transaction, a runtime error MESSAGE_TYPE_X occurs and they cannot view Clinical Workstation. Our IS-H version is 4.72, and we have s...

Resolved! Creating patient master record and self payer - FI customer.

Hello, All.When I create a patient master record, I create a salf payer. The system then automatically creates the corresponding FI customer master record, but the system doesn't automatically create the corresponding SD customer master record.In our...

ISH Cost center allocation NCOP

Hi there,Using transaction NCOP I have set up cost centers linked to organizational units. I have a requirement to assign organizational units to different cost centres based on validity dates. For example, org unit C5 is assigned to cost center C5...

Resolved! Shortcut for customer-defined functions in CPB function bar

Hi everybody,in a way similar to standard "shortcuts" (e.g. "F3" key for Back function; "Ctrl + S" for Save function; "F12" for Cancel function; and so on), I was trying to find if it's possible to assign such shortcuts to customer-defined functions ...

Resolved! Material Consumption on Service Entry

Hi All,I have been scratching my head over the integration between MM and ISH specifically on how to post material consumption upon service entry. After reading the documentation on [http://help.sap.com/saphelp_ish471/helpdata/EN/71/f54d369ec6fd64e10...

Invoice Print preview failed

Hello,i have billed a case succesfully. In transaction NA30N (Case-related invoice processing), i try to preview the invoice.But it fails in error with message "SAPscript form output termination: event FAKTTS is not maintained".I have followed instru...

Pricing procedure and condition type

Hello,i'm currently configuring princing procedure in our ISH system.According to documentations and training materials, pricing procedure sould be named ISH001 and its first condition should be GP00.My problem is that in the system i use, pricing pr...

Resolved! Cost center determination

Dear SAP gurus,In my present client the requirement is to determine cost centers based on performing unit. As we know in NCOP the Cost center is determined by Requesting unit /Requesting nursing unit.I tried for several devlopments but the cost cente...

Send Clinical Order (or service request) via HL7

Hi!I comprehended how to send Patient data to Lab system via HL7.Is there any way to send Clinical Order (or Service Request) to lab system?I suppose it should be HL7 ORM u2013 Order Message.

Resolved! How deep is the integration between SAP Patient Management and SAP CRM?

Hi everybodyI'm trying to get updated on how deep is the integration between SAP Patient Managemen (IS-H) and SAP CRM (Customer Relationship Management).I heard about SAP PRM (Patient Relationship Management), but as far as I know, is an isolated sol...

Resolved! Problem creating document with function ISH_N2_MEDICAL_DOCUMENT

Hello,first of all, creating a document with correct data works. But our customer wants the documents also to be created if the name of the responsible employee is wrong or not existing.Can this be done in some way? Because when i try to use the func...

What is the standard measure unit of time?

Hello all!Our customer is planning to maintain the standards, that define the standard working time of doctors and nurses for performing medical service/This standards will be involved in proccess of costing services or cases.Is the any universal st...

How to configure two payer for one case id?

Dear All, Hi,How to configure two payer for one case id ( one is SP and second is Insurance Com.), How to configure who is main payer.RegardsAnkitEdited by: ankits on Jun 7, 2010 1:25 PM

Resolved! Billing services problem

Dear All, Hi,When i cancel the invoice, the services doesn't show the canceled status. But it generates the canceled billing document number. and the same services can be billed again.Is there any configuration error?Regards...

Resolved! How to comminicate via HL7 and PI

Hello!I was told that PI 7.11 includes an HL7 adapter. But I'm unable to find it. Where can I download it?I also installed XI CONTENT: IS-H and IS-H_IC but there is no definition of HL7 messages (for example ADT_A05 from http://sap.com/xi/HL7/V25). W...

USEREXIT_FILL_VBRK_VBRP

Hi all,I'm try to fil the user field VBRP-ISHPRICE1 using the USEREXIT_FILL_VBRK_VBRP. The information comes from TKOMP-ISHUSERPRICE1, i mean, the user exit code is very simple: CHECK NOT vbrk-ishkostr IS INITIAL. PERFORM call_badi_pricing_fields...

Resolved! Equipment Maintainance

Hello Experts, I want know about equipment maintainance in hospital, preventive and corrective both with AMC.Please suggestQuick reply will be helpful

Business Process Best Practises in Healthcare

Dear community members,for a customer engagement in Brazil, I'm looking for a business process map for healthcare providers in general and hospitals in particular. Please let me know if you have knowledge about any best practice collections in the ma...

Resolved! Integration Customer and Patient master data

Hi,We've tested the integration between customer and Patient and we found the issue, when the customer already exists in AR and then we need to create it like patient, the customer is created again. How can we to set the syncronization both maste...

Filter in a specific column of NWP1

Hi colleagues,someboy know in which table (or where?) are saved the filter conditions defined in the columns of the views of Clinical Work Station?Best regards,AlbertoEdited by: Alberto Aquino on Apr 27, 2010 9:57 PM

Resolved! Trx ONOC

Hi friends,Anyone know what the objective of the transaction ONOC and where is it used?Best regards,Alberto.

In Building Unit Value of X-axis & Y-axis

Dear All,I want to create 10 bed in a room, for using the T-code NR12 can anyone have any idea what should the value of x-axis and y-axis for both the room and the bed, or their any calculation for defining the x- axis & y-axis in Building unit. Rega...

Resolved! Table NPIR

Hi all! I have incorrect data on this table. Which transaction can I use to add/delete entries to this table? i've checked NV31 but this transaction doesn't shown the same data i see on the table via SE16Thanks and regardsDani

Resolved! How to calculate hours in day-patient bed occupancy?

Hello all!our customer has a day-patient department, where patient comes to get treatment for several hours and occupies bed for these several hours. and it not an outpatient case, it is day-patient with an admission and a discharge, a case that last...

NWP1 automatic refresh

hi, I have a problem with NWP1 transaction. I've made several variants for every unit with automatic refresh set in 60 sec.the refresh does not work every defined time interval. The option of the menu... settings --> automatic refresh is deshabilited...

Discounts at Payment Distribution

HiWe are implementing an IS-H project with payment distribution, my client needs to make discounts before billing ( with VK11 for example), but valid only for one of the case payers. How is it possible to have different valid conditions per billing d...

HCM integration with ISH possible?

Hello,My question relates to integrating personnel with the human capital management. I would be interested in linking not only personnel data but also planning schedules in the two modules. Do I have to create a specific process?Many thanks.

Resolved! Patient id & Customer id table name

Dear All,Please let me know the table name where customer id is related to patient id or case id.RegardsAnkit

Resolved! Insurance verification

Hi, We have experimented a performance problem with transacction NK01. Could anyone tell me if have had a similar problem? How can we solve this? the problem is specially with a large episodes. ( many services ).thanks.

Resolved! Data is not maintned in TN02A

Dear all,I have configured the system, but when i m trying to run the Tcode NV2001 or NV01 it gives an error that " No entry for xxxx (institute name) FI in table TN02A.Please let me know (all masters) that this is configuration error or system erro...

Resolved! Error in cancelling the billing document through NA03 tcode

Hi,When I am trying to cancel the billing document with NA03 tcode it is throughing out the error saying " Item category NF01 L2N cannot be edited with billing type NS01".Billing document has item category as NF01.I am not able to figure t out why it...

Resolved! Unable to add Material expenses in the billing

Hi,I am working on some requirements in IS-H. Creation of case related billing(NA30N) allows billing for services provided. But the requirement is billing should also include the medicines(material) used for that case.It means billing should contain ...

Add an Icon to the Descr of an appointment in the i.s.h.med planning grid

Hello all,I'm implementing the BAdI N1_PG_LABEL_APP for the i.s.h.med planning grid to change the descriptions of appointments. The exporting parameter e_info has the typ string and I managed to fill these string with other informations about the app...

Resolved! Appointments in planning grid turn into pink color

Hello, One of our customers who are using the planning grid, now have the problem that all of the appointments in the grid turned into pink. This happened for all the appointments planned one 2 days. So fare, there is nothing wrong with funtionalitie...

Unable to create case-based order in IS-HCO

Hi,I have gone through SAP help documentation and tried to configure necessary steps for ISH and CO Integration.I could not succeed much as case-based order is not getting created with transaction NCO2. Error message is not having any explanation for...

Resolved! to bill services before their performing! how?

Dear all!According to the bussines process (that we must implement in ish): patient pays (in cash to the cash desk) for the service before this service is performed to the patient.As for the standard ish possibilities: we planed to use the field "pai...

Patient Archiving

Hi all,I was wondering if anyone has the same problems we are facing now. Our database is 3 years old, and expanding rapidly. I see some documents specify that cases can be archived? But we will need cases + Patients? any one with experience in this ...

Best Practice SAP HealthCare Portal

Hi SAP Team, I have a following questions about the SAP HealthCare integration with SAP Portal, What is the best practice for implementation in these case? Its necessary to develop the application using webdynpro or Now I available the SAP Portal Bus...

Version of IS-H ?

Hello,With is the latest version of IS-H Health Care ? Thank's!

NT12 - Assign Service --> Surgical procedures

Hi,I have configured the assignment of Service to a Surgical procedure.Also activatedOPZOTYP, OP_NTPZ, OP_TARIF.When I enter a Surgical Procedure in Surgical entry screen. The service screen does not get populated. Does ECC 6.0 support this feature....

subscreen mapping needed: between viewid and program with dynpro nr

Hi there,for some mandatory field checking for NV2000 I want to read from screen modification. I am not within NV2000 transaction, but on some inbound process for data being loaded via proxy mechanism.What I would like to use are the function module...

IS-H questions and answers

Hello Everyone,I'm looking for Questions&Answers Database regarding IS-H. I couldn't find anything about interview questions and answers cookbook, file etc. for Healthcare. If anyone has the related documentation, can you please share these informati...

Resolved! In Case type requition case order error.

Dear all,In Tcode NMM5 / NMM7 when i try to maintain case type material requisition, it generates the error, "No case order exist".RegardsAnkit