Hello evryone.Myself Tushar Babu, An automobile engineer by profession but looking into material inventory managemen as on date.I am new to SAP, and still learning to use reports. First time exposure to DBMS of any form.Joined this forum to understan...
hiIS there any cookbook or config manual on VMS ? how is differ from DBM ? if all senarios are possibel by VMS then why cant VMS OVER DBM?kaustubh
Hello,We are looking for information regarding the availability of SAP Automotive and SAP DBM in the following countries (Romania, Poland, Slovenia, Slovakia, Hungary, and Russia).Could someone help us understand what the release plan for these produ...
Hi Gurus,Where can I find the field for Counter Reading in Entry Unit at the Meas.Data/Notific Tab when we create the new warranty claim? I need to get this field for VSR check, this field cannot left blank. The structure and field name that I find f...
hii do config to add warranty type in BGM1, follow the sap link :-- plant maintenance and customer service -> master data in plant maintenance and customer service -> basic settings -> warranties -> define warranty types :-5 Guarantor (customer) BL...
Dear experts , i am getting error " No Action Control found " in transaction /DBM/VM.can u abel to guide me ?i have chked VMS roles and VELOS also is also maintianed. what should be ideal config for this ?kaustubh
Hi,In /DBM/TM_VT TRANSACTION I slected personal number and event (like work on order) and choose order no from list of release orders but when saving system is giving the below message"Error occurred during saving of time stamp of personnel number 00...
Hi, I want to transfer the overtime costing to PS/PM/CO modules.I am using CAT5,7,8 and CAT9 transactions.I have the over time calculation table. I want to add the calculation code while transfering.Is there any badi or user exist available.I want t...
hello all, we have an existing industry solution for automotive on 4.6c. we have changed a lot of the code for our needs. now, we are upgrading to ecc 6.0. i have noticed that there has been a lot of changes to the solution. my question is, does anyo...
Hi expert,can you explain the difference between a partner function and customer in SAP?ThanksIn advance
Hi,After Creating Time recording in Tcode:/DBM/TM_VT, the DBM order number is not updating in CAT3 transaction but data was updated in Dbm Order under Tab:Target -Actual CompHow to solve thisThanksChidambaram
Hi Why we are going for SAP-IS and what are benifits ?also send me any documentation releated to SAP-IS Vivek
Hi,we created Time stamps in /DBM/TM_VT and also we entered Dbm order to personal number and event type.This DBm order number in not updating in CAT3 transaction in Order columnThankschidambaraqm
Hi,In DBM Parts tab of Service workshop order under Parts tab- procurement "stock information sub-screen" is not displaying.How to fix the errorThanks and regardsChidambaram
hiwe are facing a problem when creating billing for work orders on which perticuler technician has done time booking. After doing the goods movement, time clocking when try to go for create billing, getting error messages: Time booked in CATS is no...
Dear Friends,As a normal story employees comes and leaves the company. There arecertain technicians which we are not going to use in future as they left the orgnization we would like to delet such technicians, how can we do that?RegardsVishal
Hello,We have non-unicode ecc 6.0 abap only landscape(3 system).Is it possible to have the vehicle configurator along with the pricing(IPC) in this current stack?(VMS)This is becuase,we are planning to implement a portal and we want to extract these ...
Dear Friends,Creaed DBM RO having sublet and then did complete purchase process for same. I have crated PR / PO did Goods recipt for whole quanity and also did invoice for this PO.Now when trying to do blling getting error GOODS RECEIPT IS NOT COMPLE...
Hi,We want to update certain additional information for order and split after billing. DBM blocks data updation in DBM order after billing creation and order close.How we can achieve same?Regards,Bobby
Hi,I am using Transaction WTY to create a Claim.During creation, I am getting an error. But upon clicking the "Error" button, the display box that will give the details of error is not appearing.Likewise, I used F4 in the Field "Defect Code" in T Cod...
Hello all,We are implementing DBM and WTY. We have 2 major questions regarding this scenario:1. Should the "revenues" from the vendor (i.e. car producer) should flow to the Header Internal Order or to the Bill-to Internal order?2. Should the answer t...
Hello Friends,I am busy with Warranty Claim Processing and I would like to know if anyone has got Processes for a Precrediting scenario and Split Claims scenario. I had a look at Best Practices but I could not find documentation for these 2 scenario...
报表导出excel 文件，excel 表头部分总是显示 u2018未定义意外u2019，能否去掉这部分 ？ 应该有个地方设置？ 谢谢Edited by: yanhong wei on Jan 22, 2009 8:20 AM
dear friendsI have created new event, status ID, assgined status ID to action control also its getting triggered perfectly and also updating status in DBM ORDER (/DBM/ORDER) but when i see summery it is showing me icon of RELEASED I want to assgine m...
I have question in output determination process?Scenario: we need to send the release to two partner at a time with same output type, say for example initially we need to send the information(delfor/deljit) to logistic provider u201CAu2019 up till ce...
HelloI am working on the parts supersession(Interchangeability of parts). I have created FFF materail and set up PIC01 for parts A->B->C with validity dates. I have changed the order type setting to show all items.When I enter a sales order for part ...
Hi,Could you please tell me the tables that the t-code /dbm/order accesses?Thanks,Ajay
Hi,Can someone please assist me with the following problem? I am creating a Refurbishment Order in Customer Service using an Equipment created by an action in VMS. The material maintained in the Equipment is a configuration material and I get an err...
Hello ExpertsAs far as I know, standard VMS actions allow me to do "Cross Plant Good Movements" (standard action CPGM). The problem is that this action executes a stock transfer (without creating a stock transport order). I need to create a stock tra...
Dear Auto wizards,We are using the standard returns sales order in the VMS. The std copy control for the returns doc (sales order) is based on the (forward) sales order and as per the settings in R3 copy control for the sales order to order.The error...
Dear Gurus:I have already installed new patch level in the front-end computer, but I'm ubnable to initialize New Visual Design Mode. The error message was Unable to initialize New Visual Design Mode, please use Classic Mode.I don't know why the error...
Hi Experts:We are implementing SAP VMS and using BAPI BAPI_VEHICLE_CREATE, but I have some concerns about its usings: We are not able to choose a VEHICLE PRIMARY OR SECONDARY STATUS with this BAPI, it determines the status defined in customizing. Is...
Hi All:For central security control, we use the tool of Citrix MetaFrame as remote connection, but we got some problems, there is one problem: as long as the end user log on Citrix MetaFrame and access to SAP system, then sometimes they can not input...
Dear Auto wizards,The std VMS has one doc type for a sales order. if I want to provide the user to make a choice of the sales order doc type, where should i head for making the setting?I guess it would be some BADI.Please do enlighten.Regards,Tariq
Helo all,We are working on a persuit, where we have to present an artifact on Vehicle management system. Basics are available on SAP. But can anybody suggest a good source to study a cycle (mainly distribution-vehicle movements) in VMS and its mappin...
Dear All:Who has the package of best practice for Automotive? Specially for product traceability and external procurement! Please share with me, thanks in advance.Good dayTao
Hi, I need to add a button to the application toolbar of /dbm/vm (vehicle master) transaction in DBM.Is there any BADI or exit available for that?Also how to handle the button.
helloits regarding Warranty claim, I am not able to find change logged. And when a claim reaches a certain status eg., DBM2, it does not allow you to view exiting docflow.How to get out of this problem so that I can see the Doc flow atleast for proc...
dear friends,I have created DBM ORDER (/dbm/order), billing is done, now the status of order is closed. Now when i cancel billing the documents get open thats perfectly fine. But now if this RO i want to close there is no option to close the RO. We ...
Hi expert,I'm working on Velo, and I have a couple of doubts. I need some suggestion.How can i link order usage with order type??Also, how I can created a link between Contract/vehicle usage and Sales order reason?I know how this objets work on stan...
when i am trying to cancel the billing for one particular DBM order it's not allowing me to cancel.error coming likecontains posting type 5 (revaluation); no cancellation possible.can any one help me to solve the issue?Thanks & RegardsMadhu
Dear Automotive wizards,We are using the Vehicle Management system for or automotive process as a distributor and retailer. The sales order - delivery settings are NOT for automatic delivery creation. However, in some cases, the delivery is getting c...
Dear Friends,I want to stop spliting RO for specific order type.Say from RO at present we can split the jobs for warranty order type and others also say XYZnow we want user should not be able to split the RO for XYZ so how to control that???Thanks & ...
Hi all,Is there any link specific to Retail Sales and FMCG Sales.Any link where we can check on support issues attended so far.Thank youGuru
Hi Expert,I'm using the DBM5 and need some advise and assistance on the DBM order creation. How to block or prevent user from creating new DBM order if the customer exceed credit limit.Your assistance is very much appreciated.Thank you.Ab Rahman
Hi All,while I am creating new Scheduling agreement system asking to assign first JIT customer assignment before saving.Where we set this condition.Chidambaram
Hi All,I need new call control parameters created in VA32 for all shipping scenarios. For some new shipping frequencies. Kindly help how to create.Thanks in Advance.
Hi,What are the pre-requisites / SAP background required to get trained in IS-Auto Warranty Management System ? Can it be learnt independently as a Module ?Thanks.Raj
Hi All,does anybody know what effects the announced switch to web dynpro for dealer portal will have:- What technique will be used, web dynpro for Java or web dynpro for ABAP- Is Java Stack no longer needed, if web dynpro for ABAP is used or is Java ...
Hi all We want to enter dealer appoiment & reneval date in customer master .Is their any standrad SAP field?
These materials will help you participate and connect with other members.
Find answers to basic questions about using SAP Community.
Learn about community rules, take our tutorial, and get support.
Familiarize yourself with questions and answers.
Share your knowledge by contributing to the community.
Introduce yourself and get to know other members.
