Accepted Solutions (0)
Answers (2)
Dear Dhinesh,
Unfortunately i tried to create WWI Generation Server and EH&S Management Server and both encountered same error. I tried to not populating the Gateway host and Gateway service of both RFC's as I believe this set up is also allowed provided only one application server is used (found in the comment column of the word file on the link you provided). Anyway the goal as of the moment is to test if the connection will be successful or not. I have noticed that on the error message, BP_CH_WWI and BP_CH_EHS_MANSRV are not registered (Please see below screenshots).
Just to highlight that I havent got any license key mentioned on the file and Ive been testing WWI early of February.
Please extend any help that you can provide. Thank you!
Kind regards,
Mark
Dear Mark,
After you run the connection test in SM59 provided you maintained the TCP/IP settings correctly as i gave before, the test should run fine.I have provided the screenshots below.
Ping me if u need further help reg any settings as I happened to face the same problem like you do.
After a lot of settings, I made it happen and its working fine.
Regards
Dhinesh
I have accessed tcode SMGW. On the screen i selected Go To and clicked Remote Gateways and the below item appeared:
Does this mean that i can use the above info for the following RFC fields in SM59:
Gateway host - pnxdev
Gateway service - sapgw00
dear Mark,
when you goto txn CGSADM, u will find the nodes similar to the below screen. Click on the icon which is marked with a square at the top below Display Server Services. This will enable us to create multiple generation servers. Maintain the RFC details.
After u have done this. Goto the WWI folder in c:. U will find a file called SVCADMIN.EXE.
Double click and choose CONTROL AND CONFIGURE SERVICES OPTION else choose Install a service.
ON THE POPUP, ENTER THE DETAILS AS BELOW
HOST = TRVWKS48 (LOCAL SYSTEM NO) where the Wwi server is installed.
NAME: BP_EH_WWI_ID5_01 (NAME OF THE WWI SERVER)
DISPLAY NAME: WWI SERVER OR WWI GENERATION SERVER
EXECUTABLE PATH: -D BP_EH_WWI_ID5_01 –T3
Run service in Local system must be unchecked
User: .\localadmin
Password: password (can be anything)
On the service attributes tab, choose Automatically as start type and Own process as Service attributes. Ignore the service dependencies as this will appear after the service is installed.
On the Event logging tab, the following must be checked. Do not enter anything in message files.
Use windows event logging
Application logfile
Supported event types:
Information, warning, Error.
Ignore other check boxes. Maintain the message files as below
C:\wwi\wwisvc.exe
C:\wwi\win32svc.dll
MAKE SURE THAT THE TEMPLATES WWI, WWILAYT AND WWIDISPL LAYOUT ARE AVAILABLE ON THE STANDARD TEMPLATE PATH AND ON WWI FOLDER.
IF NOT COPY THE ABOVE LAYOUT FROM WWI FOLDER AND PLACE IT IN THE STANDARD TEMPLATE PATH.
STANDARD TEMPLATE PATH: C:\Program Files\Microsoft Office\Templates\1033
Regards
Dhinesh
Hi Dinesh !
I am also following the same problem. This is how i proceeded,
1. Created a OS level user with "log on as service"
2. Logged on as Administrator & executed wwi setup and installed all the options such as
i. Information Syestem / Labelling workstation
ii. Install Generation server
iii. Install GLM print Tool
iv. Workstation for Editing Report Templates
v. WWI File Server Installation
but in this order ii -> iii -> i -> iv -> v
3. Set up Generation server & Management server as MS windows service using svcadmin.
But when we monitor the server using CGSADM, I get this error,
when cg5z was executed, i get the following error msg.
when the RFC connection was tested, i get the following error,
When i run svcadmin -> Control & Configure services - > EH&S Administration Management Server - > Start, i get this error,
similarly for WWI Generation server,
If you have faced similar kind of error when you have installed can you provide some guidance ?
Hi Dinesh !
Yes, as you said am facing pbm in RFC connection. I have maintained the DMS settings as you have mentioned in thread 3395183). Can you provide some more info on RFC.?
I am describing how i did the installation.
1.IDES server is there and another local PC (with frontent) is there.
2.WWI is installed in the local PC by following the instructions in the cookbook(creating Local user with all administrative privilege and wwiuser with "log on as service")
3. Though RFC destinations are not working, proceeded further to install generation server.
4.Executed the step "Installation of WWI with EH&S Management Server". For the GW host, earlier we maintained the IDES server name without the router string (I posted the output in Image 4 of my previous reply). Now we maintained the value with router string. For GWServ, entered sapgw followed by the instance number from the logon page and maintained other values as mentioned in cookbook.
Now when i start the service, it is running,
But when i execute the cgsadm, i still get the same error, ""No EH&S management server is currently logged on at the SAP gateway".
Here are the RFC Destinations i used,
Management server,
DEST=EHS_MGMT_ID3
PROGID=EHS_MGMT_ID3
TYPE=R
GWHOST=/H/***.**.***.**/H/IDES
GWSERV=sapgw01
MANAGED=1
PROGRAM=wwirfcsvU.exe
WWI Generation server,
DEST=GENPC_ID3_800_1
PROGID=GENPC_ID3_800_1
TYPE=R
GWHOST=/H/***.**.***.**/H/IDES
GWSERV=sapgw01
MANAGED=1
PROGRAM=wwirfcsvU.exe
Synchronous server,
DEST=GENPC_ID3_800_SYNC1
PROGID=GENPC_ID3_800_SYNC1
TYPE=
GWHOST=
GWSERV=
Dear Kamal,
Thanks for sharing your knowledge. I was prompted with the below message upon accessing the said tcode. Do you have any idea what should be done in relation to this popping message?
Kind regards,
Mark
| User | Count |
|---|---|
| 9 | |
| 2 | |
| 2 | |
| 1 | |
| 1 | |
| 1 | |
| 1 |
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.