Enterprise Resource Planning Blogs by Members
Gain new perspectives and knowledge about enterprise resource planning in blog posts from community members. Share your own comments and ERP insights today!
cancel
Showing results for 
Search instead for 
Did you mean: 
former_member1232
Active Contributor
5,173

"Microsoft Security delivers new multi-cloud capabilities"




Hello Community Members,

I'm back with some interesting PoV to demonstrate the SecOps & SAP Security elements on 'SAP on Azure (or AWS, GCP, or on-prem systems)', leveraging Cloud-based SIEM and SOAR solutions.


As we know SAP is the custodian for immense amounts of sensitive data in many of the most prominent organizations in the world. Since these applications are business-critical, and SAP security breach can be disastrous. However, protecting SAP applications is uniquely challenging always. We constantly require a prominent security squad and resources, characterizing with The Guardians of the galaxy to protect from any internal or external violations. SecOps on hyperscalers is a very comprehensive topic, so I will begin with a clear lodestar. In today’s post, I'd like to exhibit how the Azure services like Microsoft Sentinel, Logic Apps, SAP Connector can be configured altogether to protect all SAP users...An incredibly straightforward use case for advanced SAP users.

Sounds fascinating! Let's hop into the technical elements!

Source: Bing images


It has been notoriously challenging to detect these threats to SAP applications, while the consequences of an undetected threat can be profoundly serious, especially breaches from inside or outside. This hardship in detection stems in part from the complex internal nature of SAP systems, as well as the fact that these systems usually have lots of cross-connections between distinct third-party applications and interfaces, specifically banking and finance segments.

Hence Microsoft Azure provides the new solution to tackle these SAP security challenges with the new SAP threat monitoring solution for Azure Sentinel. (First cloud-native SIEM from a major cloud provider.)

Continuous Threat Monitoring for SAP in Microsoft Sentinel  


Azure provides the new solution to tackle these SAP security challenges with the new SAP threat monitoring solution for Azure Sentinel. Please note, is in public preview today, this solution provides continuous threat detection and analytics for SAP systems deployed on Azure, in other clouds, or on-premises. Now, SecOps teams can use Azure Sentinel’s visibility, threat detection, and investigation tools to protect their SAP systems and cross-correlate across their entire organization.

Prerequisite - I presume you completed the deployment of your SAP system and Microsoft Sentinel connection by referring- Deploy SAP continuous threat monitoring | Microsoft Docs (Microsoft documentation)

The Continuous Threat Monitoring for SAP in Microsoft Sentinel enables you to monitor your SAP environment and helps you with cross-correlating various logs from numerous systems with your SAP logs. With the Microsoft Sentinel SAP connector, you can monitor your SAP systems for sophisticated threats within the business and application layers. The connector uses a docker container, which pulls the data from SAP and then sends it through to Microsoft Sentinel. Don't worry, you will see the architecture flow outlying in this article.

By deploying the data connector, we can now import the SAP logs into Sentinel, correlate the logs with other data, and analyze and hunt the logs for emerging threats. Install the SAP solution security content to gain insight into your organization's SAP environment and enhance any related security operation capabilities.  

For a comprehensive synopsis of what is included in the Sentinel SAP solution content,
see
 Microsoft Sentinel SAP solution - security content reference | Microsoft Docs  

Microsoft Sentinel contains a substantial Security Orchestration and Automated Response (SOAR) capability which will help SAP applications respond to incidents rapidly with AI and automation features built in to use. Many SOAR integrations can be deployed as part of a Microsoft Sentinel solution, together with related data connectors, analytics rules, and workbooks.
For more information, see the Microsoft Sentinel solutions catalog.  

AmitLal_0-1646931409213.png



Source: Microsoft Azure documentation

 

In this composition, we will see how you can use the SOAR capabilities of Sentinel with SAP Application, by using the Azure playbook that automatically takes on remediation actions in the SAP system directly with the Logic App connector.


Let’s glimpse!

Overview & Use case  


We are stirring to focus on a pragmatic use case criterion for automating SAP actions as a response to an incident in Sentinel with SAP code triggered with Logic Apps support.

Use case: An SAP user with developer privileges could exploit those privileges to view sensitive human resources or financial data by perpetrating a function module to gain elevated access privileges which are not authorized to this SAP user. Microsoft Sentinel gives you the ability to quickly detect these threats and hazards in the SAP system without drowning in noise.

Obstruct the SAP dialog or RFC user(s) after a suspicious user incident is notified.

  • The SOC (SecOps) team is alerted of a suspicious atypical travel alert.  

  • After triaging the incident, the SOC team decides to block the user's access to sensitive environments. One of these sensitive environments is the SAP system to which the user can't have access anymore.  

  • The SOC team runs playbooks for these automatic remediations and one of the playbooks is the ‘BlockSAPUser’-playbook.  


The objective here is to block the SAP dialog or RFC user credential by locking the dialog or RFC user accessing SAP S/4HANA or ECC/NetWeaver system in an automated way with help of Logic Apps BAPI function triggers.  


Getting Started 


For this blog post, we make use of the on-prem data gateway to leverage the SOAR capabilities from Sentinel on SAP.   

This gateway makes it possible to have a secure data transfer between data sources and services in the cloud. The data gateway should be installed on a Windows system. It is feasible to use a dedicated machine or install it on the machine on which SAP is running, but you must ensure that both the VMs can intercommunication with each other over the private IPs or the same VNET.  

When you have installed the data gateway, you will also need to install the SAP Connector for Microsoft .NET 3.0 on the identical machine as the data gateway. The SAP Connector for Microsoft .NET 3.0 will allow us to use BAPIs and remote-enabled function modules in a .NET application. You can download the SAP connector via Software Downloads - SAP ONE Support Launchpad 

 

Make sure to use “Install assemblies to GAC” when setting up the SAP connector and afterwards restart the data gateway.

Make sure to use “Install assemblies to GAC” when setting up the SAP connector and afterward restart the data gateway. 

For our conclusive preliminary step, we will have to create the gateway cloud service to conclude the handshake between the cloud services and the on-premises data gateway on the windows host.

InstallGWOnAzure.png

More information on creating the Azure gateway resource can be found on Access data sources on-premises - Azure Logic Apps | Microsoft Docs  




Reference Architecture for SAP System(s)
connected with Azure Cloud Services and Workflow

The final architecture schema

  1. SAP Users/RFC User(s) connected from SAP system using SAP RFC /SOAP to Docker container running on Azure Cloud (SAP running on-prem or Azure or any other hyperscalers like AWS or GCP as depicted above in Architecture diagram.)

  2. Microsoft Sentinel triggers an atypical travel Alert/incident if any specific SAP user breaches after detecting by Microsoft Sentinel.

  3. Azure Logic Apps connected with Microsoft Sentinel and on-prem gateway (using SAP connector) triggers SAP BAPI locking function.

  4. This BAPI function triggered by Logic Apps connected to the SAP system locks the SAP user automatically. You can send email via Logic Apps to SecOps for SAP user locked alter (optional step can be added for alerts)






Let's see this Playbook in detail 


In this use case, a suspicious developer user will be intercepted from accessing the SAP environment.  

The SOC team has been notified of an ‘Atypical travel’ alert in Sentinel. After thorough investigations, they decide to block the user entity from accessing the SAP environment and use the “Run playbook” action to begin automatic remediation.   

Atypical travel has been detected. Playbook will be used as an automatic remediation action.Atypical travel has been detected. Playbook will be used as an automatic remediation action. This playbook will use the Microsoft Sentinel incident as a trigger so that you can use it as an automatic action on an incident.  In the playbook, the ‘Create stateful session’ action from the SAP connector (see: SAP - Connectors | Microsoft Docs) is used to make the connection with SAP. 

When the connection has been made, extract the user entity from the Sentinel incident and use the ‘BAPI - Call method’ to block the user in SAP.  

For more information visit Connect to SAP systems - Azure Logic Apps | Microsoft Docs  

  

Logic app for blocking a user in SAP

  • Azure Logic App script available on GitHub page for Input BAPI code - Link

    <!-- Business object USER, method UNLOCK for Unlock user implemented by RFC BAPI_USER_UNLOCK -->
    <UNLOCK xmlns="http://Microsoft.LobServices.Sap/2007/03/Bapi/BUS2017/">
    <USERNAME>SAPUSERNAME</USERNAME>
    </UNLOCK>

     


When my SAP user "Amitlal" attempts to logon to the SAP S/4HANA system, I cannot access the system since my user got locked out:   

  Final run 



  

∑ Conclusion


Azure provides enterprise-grade cloud infrastructure & Security for SAP workload on which customers and partners can rely. No matter what your service level objectives are, Azure empowers you to achieve your organization's reliability goals. More complex use cases (e.g., with supplementary steps for authorization from SecOps/SOC manager via Microsoft Teams or Delete the SAP user account after a specific period, removing specific roles or blocking it!) are possible and we encourage you to try it out on your own!

 

Microsoft Sentinel and Logic Apps can be the 'Guardians of SAP Security Operations'?
Yes, one hundred percent!


Please share your views and comment. Thank you!

 





Special Thanks to Naomi Christis -Microsoft Sentinel Expert for co-authoring this article published on -
-Microsoft Tech Community

 

 




Disclaimer- The Microsoft Sentinel SAP solution is currently in PREVIEW include supplementary legal terms that apply to Azure features that are in beta, preview, or otherwise not yet released into general availability. I have blogged this article to share information that is intended as an unrestricted resource and personal insights. Errors or omissions are not intentional. Products and services cited in this article are not endorsements or favor. Opinions are my own and not the views of my employers (past, present, or future) or any organization that I may be affiliated with. Your comments to my posts are your views and I'm not responsible for anything shared by anyone in the article. SAP and hyperscalers Customers are responsible for making their own independent assessment of the information in this document. This article is for informational purposes only. The GitHub code is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. Thank you!





 
Labels in this area