Application Development Discussions
Join the discussions or start your own on all things application development, including tools and APIs, programming models, and keeping your skills sharp.
cancel
Showing results for 
Search instead for 
Did you mean: 

short text for inspection multiple time for single lot no

DurgeshPandey
Explorer
0 Kudos
338

According to business requirement i have develop a Z report for monthly amorphous production report.

Data are extracted from qals,qave and qamv table.while selecting data from qamv there are multiple short text for inspection

with respect to one lot no (PRUeflos).I am stuck in resolving it how shall i display this in alv .For ref tcode qa13

The following code i have written:

SELECT

        prueflos

        werk

        aufnr

        matnr

        charg

        lagortchrg

        ebeln

        blart

        mjahr

        mblnr

        budat

        bwart

        losmenge

FROM qals

INTO CORRESPONDING FIELDS OF TABLE it_final

  WHERE  mjahr IN s_mjahr

  AND    matnr IN s_matnr

  AND    werk IN s_werk

  AND    budat IN s_budat

  AND bwart EQ '101' OR bwart EQ '102'.

*  SORT it_final DESCENDING .

  IF it_final[] IS INITIAL.

    MESSAGE e008(zcr).

  ENDIF.

  IF NOT it_final[] IS INITIAL.

    SELECT matnr spras maktx FROM makt INTO TABLE it_makt FOR ALL ENTRIES IN it_final WHERE matnr = it_final-matnr

                                                                                         AND  spras EQ 'E'.

    LOOP AT it_final INTO wa_final.

      READ TABLE it_makt INTO wa_makt WITH KEY matnr = wa_final-matnr

                                               spras = 'E' .

      IF sy-subrc = 0.

        wa_final-maktx = wa_makt-maktx.

        MODIFY it_final FROM wa_final.

        clear wa_final.

      ENDIF.

    ENDLOOP.

  ENDIF.

  IF NOT it_final[] IS INITIAL.

    SELECT prueflos  vcode FROM qave INTO TABLE it_qave FOR ALL ENTRIES IN it_final WHERE prueflos = it_final-prueflos.

    LOOP AT it_final INTO wa_final.

      READ TABLE it_qave INTO wa_qave WITH KEY prueflos = wa_final-prueflos .

      IF sy-subrc = 0.

        wa_final-vcode = wa_qave-vcode.

        CASE:wa_final-vcode.

          WHEN 'A'.

            wa_final-vcode_text   = c_vcode_a.

          WHEN 'A1'.

            wa_final-vcode_text   = c_vcode_a1.

          WHEN 'B1'.

            wa_final-vcode_text   = c_vcode_b1.

          WHEN 'B2'.

            wa_final-vcode_text   = c_vcode_b2.

          WHEN 'C'.

            wa_final-vcode_text   = c_vcode_c.

          WHEN 'R'.

            wa_final-vcode_text   = c_vcode_r.

          WHEN 'R1'.

            wa_final-vcode_text   = c_vcode_r1.

          WHEN 'S'.

            wa_final-vcode_text   = c_vcode_s.

          WHEN 'W'.

            wa_final-vcode_text   = c_vcode_w.

        ENDCASE.

        MODIFY it_final FROM wa_final .

        clear wa_final.

      ENDIF.

    ENDLOOP.

  ENDIF.

  IF NOT it_final[] IS INITIAL.

    break-point.

    SELECT prueflos  MERKNR kurztext FROM qamv INTO TABLE it_qamv FOR ALL ENTRIES IN it_final WHERE prueflos = it_final-prueflos.

    LOOP AT it_final INTO wa_final where prueflos = wa_final-prueflos.

      READ TABLE it_qamv INTO wa_qamv WITH KEY prueflos = wa_final-prueflos .

*      idx = sy-tabix.

*      clear wa_final.

      IF sy-subrc = 0.

*        sort it_qamv descending.

        wa_final-MERKNR = wa_qamv-MERKNR.

        wa_final-kurztext = wa_qamv-kurztext.

        MODIFY it_final FROM wa_final.

        clear wa_final.

      ENDIF.

    ENDLOOP.

  ENDIF.

4 REPLIES 4

former_member186660
Participant
0 Kudos
246

Good day Durgesh,

Use FM - REUSE_ALV_GRID_DISPLAY.

Here is the example how to display on ALV.

http://www.saptechnical.com/Tutorials/ALV/SampleALVGridProgram.htm

Regards,

Tumelo Modise

Former Member
0 Kudos
246

Hi Durgesh,

The short text of the lot depends on the node selected i.e in the above screenshot your node is 0010(operation/Activity). I have used the tables QALS, PLMK for this.

the values that need to be passed to PLMK table are PLNTY, PLNNR and PLNKN and get the details of KURZTEXT(short text for the lot characteristics).PLNTY and PLNNR values can be passed from QALS table but PLNKN value should be the current node. In my report I fetched the node value from Ztable and I donno any Standard table where this node value will be stored so, ask QM consultant to help you in fetching the node value. Hope this helps.

Regards,

Mounika M

0 Kudos
246

Hi Mounika,

If possible could you plz send me your code for reference.

Warm Regards,

Durgesh

0 Kudos
246

Hi,

First of all my requirement is completely different, its not a report. So i have done some little modifications to my code. This is purely for reference.

Vorglfnr is the node i mentioned above. I think you can even use QAMV table instead of PLPO and PLMK tables as it contains VORGLFNR field in it and the value of MERKNR can be achived using the FM 'QEEM_GET_CHARACTERISTIC_DATA'. Anyway, I have used PLPO and PLMK tables. Hard-coded values NA SI S etc. are the MIC values and for you they are Grades,IV,COOH etc. 

SELECT OBJNR

          PRUEFLOS

          WERKS

          VORGLFNR FROM ZQM_ANLSMPL_GEN INTO TABLE IT_SAMP

                   WHERE OBJNR IN S_OBJNR.

   IF IT_SAMP IS NOT INITIAL.

     SELECT PRUEFLOS

            WERK

            PLNTY

            PLNNR FROM QALS INTO CORRESPONDING FIELDS OF TABLE IT_QALS

                  FOR ALL ENTRIES IN IT_SAMP

                  WHERE PRUEFLOS = IT_SAMP-PRUEFLOS.

     LOOP AT IT_SAMP INTO WA_SAMP.

       READ TABLE IT_QALS INTO WA_QALS WITH KEY PRUEFLOS = WA_SAMP-PRUEFLOS.

       WA_QALS-NODE = WA_SAMP-VORGLFNR.

       APPEND WA_QALS TO IT_QALS2.

       CLEAR: WA_SAMP, WA_QALS.

     ENDLOOP.

     IF IT_QALS2 IS NOT INITIAL.

       SELECT PLNTY

              PLNNR

              PLNKN

              VORNR

              WERKS FROM PLPO INTO TABLE IT_PLPO

                    FOR ALL ENTRIES IN IT_QALS2

                    WHERE PLNTY = IT_QALS2-PLNTY

                      AND PLNNR = IT_QALS2-PLNNR

                      AND PLNKN = IT_QALS2-NODE

                      AND LOEKZ <> 'X'.

       IF IT_PLPO IS NOT INITIAL.

         SELECT PLNTY

                PLNNR

                PLNKN

                MERKNR

                VERWMERKM FROM PLMK INTO TABLE IT_PLMK

                          FOR ALL ENTRIES IN IT_PLPO

                          WHERE PLNTY = IT_PLPO-PLNTY

                            AND PLNNR = IT_PLPO-PLNNR

                            AND PLNKN = IT_PLPO-PLNKN

                            AND LOEKZ <> 'X'.

       ENDIF.

     ENDIF.

   ENDIF.


LOOP AT IT_SAMP INTO WA_SAMP WHERE OBJNR IN S_OBJNR.

     IF SY-SUBRC = 0.

       wa_final-PLANT     = WA_SAMP-WERKS.

       wa_final-SAMPLE_NO = wa_samp-objnr.

       wa_final-prueflos = wa_samp-PRUEFLOS.

     READ TABLE IT_QALS2 INTO WA_QALS WITH KEY PRUEFLOS = WA_SAMP-PRUEFLOS BINARY SEARCH.

       IF SY-SUBRC = 0.

         

READ TABLE IT_PLMK INTO WA_PLMK WITH KEY PLNTY     = WA_PLPO-PLNTY

                                                      PLNNR     = WA_PLPO-PLNNR

                                                      PLNKN     = WA_PLPO-PLNKN

                                                      VERWMERKM = WA_QAMKTAB-VERWMERKM BINARY SEARCH.

         IF SY-SUBRC = 0.

           CALL FUNCTION 'QEEM_GET_CHARACTERISTIC_DATA'

             EXPORTING

               I_PRUEFLOS              = wa_final-prueflos

             TABLES

               T_QAMKTAB               = T_QAMKTAB

*            EXCEPTIONS

*              NO_DATA_FOUND           = 1

*              INTERNAL_PROBLEMS       = 2

*              OTHERS                  = 3

                     .

           IF SY-SUBRC <> 0.

           ENDIF.

           LOOP AT T_QAMKTAB INTO WA_QAMKTAB WHERE PLNKN = WA_PLPO-PLNKN.

             wa_final-INSP_TEST_NO = WA_QAMKTAB-MERKNR.

             READ TABLE IT_PLMK INTO WA_PLMK WITH KEY PLNKN = WA_QAMKTAB-PLNKN

                                                      VERWMERKM = WA_QAMKTAB-VERWMERKM.

             IF SY-SUBRC = 0.

               IF WA_PLMK-VERWMERKM = 'NA' .

                 wa_final-INSP_TEST_RSLT = value.

               ELSEIF WA_PLMK-VERWMERKM = 'SI'.

                 wa_final-INSP_TEST_RSLT = value.

               ELSEIF WA_PLMK-VERWMERKM = 'P' .

                 wa_final-INSP_TEST_RSLT = value.

               ELSEIF WA_PLMK-VERWMERKM = 'S' .

                 wa_final-INSP_TEST_RSLT = value."WA_XRF2-S.

               ELSEIF WA_PLMK-VERWMERKM = 'CA'.

                 wa_final-INSP_TEST_RSLT = value."WA_XRF2-CA.

               ELSEIF WA_PLMK-VERWMERKM = 'V' .

                 wa_final-INSP_TEST_RSLT = value."WA_XRF2-V.

               ELSEIF WA_PLMK-VERWMERKM = 'FE'.

                 wa_final-INSP_TEST_RSLT = value."WA_XRF2-FE.

               ELSEIF WA_PLMK-VERWMERKM = 'NI'.

                 wa_final-INSP_TEST_RSLT = value."WA_XRF2-NI.

               ELSEIF WA_PLMK-VERWMERKM = 'TI'.

                 wa_final-INSP_TEST_RSLT = value."WA_XRF2-TI.

               ELSEIF WA_PLMK-VERWMERKM = 'MN'.

                 wa_final-INSP_TEST_RSLT = value."WA_XRF2-MN.

               ELSEIF WA_PLMK-VERWMERKM = 'AL'.

                 wa_final-INSP_TEST_RSLT = value."WA_XRF2-AL.

               ELSEIF WA_PLMK-VERWMERKM = 'MG'.

                 wa_final-INSP_TEST_RSLT = value."WA_XRF2-MG.

               ELSEIF WA_PLMK-VERWMERKM = 'K' .

                 wa_final-INSP_TEST_RSLT = value."WA_XRF2-K.

               ELSEIF WA_PLMK-VERWMERKM = 'C'.

                 wa_final-INSP_TEST_RSLT = value." WA_XRF2-C.

               ENDIF.

             ENDIF.

             APPEND wa_final to it_final.

             CLEAR: WA_QAMKTAB , wa_final.

          

           ENDLOOP.

           DELETE IT_final WHERE INSP_TEST_RSLT IS INITIAL.

         ENDIF.

       ENDIF.

     ENDIF.

   ENDLOOP.