Application Development Discussions
Join the discussions or start your own on all things application development, including tools and APIs, programming models, and keeping your skills sharp.
cancel
Showing results for 
Search instead for 
Did you mean: 

Idoc Segment data

Former Member
0 Kudos
3,745

HI All,

I need to pass a constant value for the fields in segments between 2 systems,where can i do that,there a transaction code wher we can do,plz let me know,all useful answers are rewarded

8 REPLIES 8

Former Member
0 Kudos
282

Hi Baharan,

Use T.Code WE30.

reward point if useful.

regards...

ABhay.

Former Member
0 Kudos
282

Hi Bharan

Can u explain a little bit more what your requirement is???

Regards

Pavan

0 Kudos
282

hi praveen,

i need to pass the text field from SO to PO.i need to pass the text field as constant to the recieving system.where i can do that.

Former Member
0 Kudos
282

Displaying IDoc Type or Segment Documentation

Prerequisites

The following section assumes that you wish to display a specific IDoc type. To display the documentation for an individual segment, choose Documentation ® IDoc segments from the initial screen of the IDoc interface and continue with step 3 in the section. However, the segment documentation only supports HTML and tree display formats.

To display the documentation for a general IDoc type (IDoc record types), read the procedure in the following section - Displaying the General Structure (Record Types) of an IDoc You can display this documentation in all the formats specified below, apart from DTD.

If you wish to send the documentation as an IDoc, you must define the IDoc type SYIDOC01 with the message type SYIDOC for your partner in outbound processing. For more information see: Partner Profiles in the Standard Dialog

Procedure

To gain an overview of all the IDoc types supplied by SAP (basic types), choose in the Initial Node of the IDoc Interface and then the F4 Help for your object basic type.

A list of the basic types supplied with your release version is displayed, together with a brief description.

Choose the required IDoc type.

Choose Goto ® User settings and specify the required view. It means: IDoc type attribute

Basic type or extension, release, version of record types: Also see important terms

Segment attributes

Frequency of use, necessity, qualified segment

Segment field attributes

Length (in bytes), data element, from which the field documentation is read.

Segment documentation

Defining text for the segment in general

Segment field documentation

Defining text for the individual segment fields = documentation of the associated data elements

Field values

For example fixed values which are attached to a domain or check tables from which the possible values are read.

The further settings affect default values for different output formats (HTML, C-header and so on).

Return to the initial screen and choose (display tree) for a quick overview of the system.

The individual segments and their fields are displayed in a tree structure which corresponds to the parent-child segment hierarchy.

You can select within the tree structure which parameters are to be output for individual objects (for example, a particular segment field). You can switch the corresponding icon on or off by clicking on it. For an explanation of the icons, select .

You can select additional formats from the initial screen.

for the IDoc format. Specify the corresponding partner (partner number and partner type).

for the HTML format. Three files are generated: One for the frame, one for the index and one for the actual documentation. Their names end correspondingly with _f, _i and _d. An HTML browser loads the frame file and places the index and documentation files in the corresponding parts of the frame. If you have made the settings in the IDoc Administration User Parameters, the browser is started automatically.

for the C-header

for the parser

Documentation ® Generate DTD for the DTD format

The C-header and HTML formats contain the information "released since release...". In fact, this applies only from Release 4.0A onwards. In releases between 3.0D and 4.0A, this information specifies the release for which the IDoc type was created (which was usually where the IDoc type was also released). This information was not implemented in releases prior to 3.0D.

Reward point if useful.

Thanks.

Abhay.

Former Member
0 Kudos
282

Also check tcode we31.

regards...

abhay.

Former Member
0 Kudos
282

Hi,

I think it will be possible by SM59.

Other wise check in WE30/31.

<b>Reward points</b>

Regards

Message was edited by:

skk

Former Member
0 Kudos
282

Hi Bharan kumar,

You can pass values using <b>ALE/IDOC</b>, if it is two sap system then do the configuration of ale and pass the values through idoc. create the idoc and msgtype and transfer to the other system.

Or try to get the values from the segment to the excel file and then integrate two system using third party software and then use bapi to upload data to other system.

U can check the steps of configuring the ale and idoc below as sample :

Go through the following Procedure & Links

ALE IDOC

Sending System(Outbound ALE Process)

Tcode SALE ? for

a) Define Logical System

b) Assign Client to Logical System

Tcode SM59-RFC Destination

Tcode BD64 ? Create Model View

Tcode BD82 ? Generate partner Profiles & Create Ports

Tcode BD64 ? Distribute the Model view

Message Type MATMAS

Tcode BD10 ? Send Material Data

Tcode WE05 ? Idoc List for watching any Errors

Receiving System(Inbound ALE )

Tcode SALE ? for

a) Define Logical System

b) Assign Client to Logical System

Tcode SM59-RFC Destination

Tcode BD64 ? Check for Model view whether it has distributed or not

Tcode BD82 -- Generate partner Profiles & Create Ports

Tcode BD11 Getting Material Data

Tcode WE05 ? Idoc List for inbound status codes

ALE IDOC Steps

Sending System(Outbound ALE Process)

Tcode SALE ?3 for

a) Define Logical System

b) Assign Client to Logical System

Tcode SM59-RFC Destination

Tcode BD64 !V Create Model View

Tcode BD82 !V Generate partner Profiles & Create Ports

Tcode BD64 !V Distribute the Model view

This is Receiving system Settings

Receiving System(Inbound ALE )

Tcode SALE ?3 for

a) Define Logical System

b) Assign Client to Logical System

Tcode SM59-RFC Destination

Tcode BD64 !V Check for Model view whether it has distributed or not

Tcode BD82 -- Generate partner Profiles & Create Ports

Tcode BD11 Getting Material Data

Tcode WE05 !V Idoc List for inbound status codes

Message Type MATMAS

Tcode BD10 !V Send Material Data

Tcode WE05 !V Idoc List for watching any Errors

1)a Goto Tcode SALE

Click on Sending & Receiving Systems-->Select Logical Systems

Here Define Logical Systems---> Click on Execute Button

go for new entries

1) System Name : ERP000

Description : Sending System

2) System Name : ERP800

Description : Receiving System

press Enter & Save

it will ask Request

if you want new request create new Request orpress continue for transfering the objects

B) goto Tcode SALE

Select Assign Client to Logical Systems-->Execute

000--> Double click on this

Give the following Information

Client : ERP 000

City :

Logical System

Currency

Client role

Save this Data

Step 2) For RFC Creation

Goto Tcode SM59-->Select R/3 Connects

Click on Create Button

RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles

give the information for required fields

RFC Destination : ERP800

Connection type: 3

Description

Target Host : ERP000

System No:000

lan : EN

Client : 800

User : Login User Name

Password:

save this & Test it & RemortLogin

3)

Goto Tcode BD64 -- click on Change mode button

click on create moduleview

short text : xxxxxxxxxxxxxx

Technical Neme : MODEL_ALV

save this & Press ok

select your just created modelview Name :'MODEL_ALV'.

goto add message type

Model Name : MODEL_ALV

sender : ERP000

Receiver : ERP800

Message type :MATMAS

save & Press Enter

4) Goto Tcode BD82

Give Model View : MODEL_ALV

Partner system : ERP800

execute this by press F8 Button

it will gives you sending system port No :A000000015(Like)

5) Goto Tcode BD64

seelct the modelview

goto >edit>modelview-->distribute

press ok & Press enter

6)goto Tcode : BD10 for Material sending

Material : mat_001

Message Type : MATMAS

Logical System : ERP800

and Execute

7)goto Tcode : BD11 for Material Receiving

Material : mat_001

Message Type : MATMAS

and Execute --> 1 request idoc created for message type Matmas

press enter

Here Master Idoc set for Messge type MATMAS-->press Enter

1 Communication Idoc generated for Message Type

this is your IDOC

Change Pointers

I know how to change the description of a material using ALE Change Pointers.

I will give the following few steps

1) Tcode BD61---> check the change pointers activated check box

save and goback.

2) Tcode BD50---> check the MATMAS check box save and comeback.

3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.

4) Tcode BD52---> give message type : matmas press ok button.

select all what ever you want and delete remaining fields.

save & come back.

5) 5) go to Tcode MM02 select one material and try to change the description and save it

it will effects the target systems material desciption will also changes

6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute

give Message type : MATMAS and Executte

ALE/IDOC Status Codes/Messages

-


01 Error --> Idoc Added

30 Error --> Idoc ready for dispatch(ALE Service)

then goto SE38 --> Execute the Program RBDMIDOC

29 Error --> ALE Service Layer

then goto SE38 --> Execute the Program RSEOUT00

03 Error --> Data Passed to Port ok

then goto SE38 --> Execute the Program RBDMOIND

12 Error --> Dispatch ok

Inbound Status Codes

50 Error --> It will go for ALE Service Layer

56 Error --> Idoc with Errors added

51 Error --> Application Document not posted

65 Error --> Error in ALE Service Layer

for 51 or 56 Errors do the following steps

goto WE19 > give the IDOC Number and Execute>

Press on Inbound function Module

for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error

<b>Reward pts if found usefull:)</b>

Regards

Sathish

Former Member
0 Kudos
282

Hi

Data Creation in Idoc

IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an

asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.

While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.

IDoc is a intermediate document to exchange data between two SAP Systems.

*IDocs are structured ASCII files (or a virtual equivalent).

*Electronic Interchange Document

*They are the file format used by SAP R/3 to exchange data with foreign systems.

*Data Is transmitted in ASCII format, i.e. human readable form

*IDocs exchange messages

*IDocs are used like classical interface files

IDOC types are templates for specific message types depending on what is the business document, you want to exchange.

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

FOr testing you can use WE19.

How to create idoc?

*WE30 - you can create a IDOC type

For more information in details on the same along with the examples can be viewed on:

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm

http://www.sappoint.com/presentation.html

http://www.allsaplinks.com/idoc_search.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://www.erpgenie.com/sapedi/idoc_abap.htm

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30 )

Create Message Type ( WE81 )

Assign Idoc Type to Message Type ( WE82 )

Creating a Segment

Go to transaction code WE31

Enter the name for your segment type and click on the Create icon

Type the short text

Enter the variable names and data elements

Save it and go back

Go to Edit -> Set Release

Follow steps to create more number of segments

Create IDOC Type

Go to transaction code WE30

Enter the Object Name, select Basic type and click Create icon

Select the create new option and enter a description for your basic IDOC type and press enter

Select the IDOC Name and click Create icon

The system prompts us to enter a segment type and its attributes

Choose the appropriate values and press Enter

The system transfers the name of the segment type to the IDOC editor.

Follow these steps to add more number of segments to Parent or as Parent-child relation

Save it and go back

Go to Edit -> Set release

Create Message Type

Go to transaction code WE81

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter

Click New Entries to create new Message Type

Fill details

Save it and go back

Assign Message Type to IDoc Type

Go to transaction code WE82

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.

Click New Entries to create new Message Type.

Fill details

Save it and go back

Check these out..

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

ALE/ IDOC

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

go trough these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...

1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.

2.IDOCs are independent of the sending and receiving systems.

3.IDOCs are independent of the direction of data exchange.

The two available process for IDOCs are

Outbound Process

Inbound Process

AND There are basically two types of IDOCs.

Basic IDOCs

Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.

Extended IDOCs

Extending the functionality by adding more segments to existing Basic IDOCs.

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30)

Create Message Type ( WE81)

Assign Idoc Type to Message Type ( WE82)

imp links

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

www.sappoint.com

--here u can find the ppts and basic seetings for ALE

http://sappoint.com/presentation.html

www.sapgenie.com

http://www.sapgenie.com/ale/index.htm

Check these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

Please check this PDF documents for ALE and IDoc.

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

Creation of Custom IDOc type and message Type

First Create Partner Profile(WE20 Tcode) and Port Definition in WE19 Tcodes.

take the Basis help to create them.

1.First create segments in WE31 Tcode with the required dataelements

2.Create the Basic Idoc Type in WE30

release the Segments and IDOC type.

3.Create Message type in We81

4.Assign the message type to IDOC type in WE82 T code

5.Create the process code in We41 (for Outbound) WE42 (for Inbound)

6.Create A fun module in SE37 starting with ZIDOC_OUTPUT_.. by copying some Inbound (for Inbound) Outbound Fun module

7.Create Workflow setting if needed ..

8. Assign the fun module to Idoc Type, Message Type and WF object (if it is there0

9.Define setting for fun module in BD51

10.In BD51 Define the settings for Fun module..

10.Assign the Processs Code to Fun mod`ule

Reward all helpfull answers

Regards

Pavan