Application Development Discussions
Join the discussions or start your own on all things application development, including tools and APIs, programming models, and keeping your skills sharp.
cancel
Showing results for 
Search instead for 
Did you mean: 

hi pls send me Idoc scenario

Former Member
0 Kudos
95

hi,

I have requirement to send data from R/3 to R/3 .Pls send me step by step procedure.

Thanks&regards

Ravi

4 REPLIES 4

Former Member
0 Kudos
57

HI

Data Creation in Idoc

IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an

asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.

While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.

IDoc is a intermediate document to exchange data between two SAP Systems.

*IDocs are structured ASCII files (or a virtual equivalent).

*Electronic Interchange Document

*They are the file format used by SAP R/3 to exchange data with foreign systems.

*Data Is transmitted in ASCII format, i.e. human readable form

*IDocs exchange messages

*IDocs are used like classical interface files

IDOC types are templates for specific message types depending on what is the business document, you want to exchange.

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

FOr testing you can use WE19.

How to create idoc?

*WE30 - you can create a IDOC type

For more information in details on the same along with the examples can be viewed on:

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm

http://www.sappoint.com/presentation.html

http://www.allsaplinks.com/idoc_search.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://www.erpgenie.com/sapedi/idoc_abap.htm

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30 )

Create Message Type ( WE81 )

Assign Idoc Type to Message Type ( WE82 )

Creating a Segment

Go to transaction code WE31

Enter the name for your segment type and click on the Create icon

Type the short text

Enter the variable names and data elements

Save it and go back

Go to Edit -> Set Release

Follow steps to create more number of segments

Create IDOC Type

Go to transaction code WE30

Enter the Object Name, select Basic type and click Create icon

Select the create new option and enter a description for your basic IDOC type and press enter

Select the IDOC Name and click Create icon

The system prompts us to enter a segment type and its attributes

Choose the appropriate values and press Enter

The system transfers the name of the segment type to the IDOC editor.

Follow these steps to add more number of segments to Parent or as Parent-child relation

Save it and go back

Go to Edit -> Set release

Create Message Type

Go to transaction code WE81

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter

Click New Entries to create new Message Type

Fill details

Save it and go back

Assign Message Type to IDoc Type

Go to transaction code WE82

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.

Click New Entries to create new Message Type.

Fill details

Save it and go back

Check these out..

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

ALE/ IDOC

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

go trough these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...

1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.

2.IDOCs are independent of the sending and receiving systems.

3.IDOCs are independent of the direction of data exchange.

The two available process for IDOCs are

Outbound Process

Inbound Process

AND There are basically two types of IDOCs.

Basic IDOCs

Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.

Extended IDOCs

Extending the functionality by adding more segments to existing Basic IDOCs.

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30)

Create Message Type ( WE81)

Assign Idoc Type to Message Type ( WE82)

imp links

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

www.sappoint.com

--here u can find the ppts and basic seetings for ALE

http://sappoint.com/presentation.html

www.sapgenie.com

http://www.sapgenie.com/ale/index.htm

Check these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

Please check this PDF documents for ALE and IDoc.

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

Creation of Custom IDOc type and message Type

First Create Partner Profile(WE20 Tcode) and Port Definition in WE19 Tcodes.

take the Basis help to create them.

1.First create segments in WE31 Tcode with the required dataelements

2.Create the Basic Idoc Type in WE30

release the Segments and IDOC type.

3.Create Message type in We81

4.Assign the message type to IDOC type in WE82 T code

5.Create the process code in We41 (for Outbound) WE42 (for Inbound)

6.Create A fun module in SE37 starting with ZIDOC_OUTPUT_.. by copying some Inbound (for Inbound) Outbound Fun module

7.Create Workflow setting if needed ..

8. Assign the fun module to Idoc Type, Message Type and WF object (if it is there0

9.Define setting for fun module in BD51

10.In BD51 Define the settings for Fun module..

10.Assign the Processs Code to Fun mod`ule

Reward all helpfull answers

Regards

Pavan

Former Member
0 Kudos
57

Hi

Data Creation in Idoc

IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an

asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.

While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.

IDoc is a intermediate document to exchange data between two SAP Systems.

*IDocs are structured ASCII files (or a virtual equivalent).

*Electronic Interchange Document

*They are the file format used by SAP R/3 to exchange data with foreign systems.

*Data Is transmitted in ASCII format, i.e. human readable form

*IDocs exchange messages

*IDocs are used like classical interface files

IDOC types are templates for specific message types depending on what is the business document, you want to exchange.

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

FOr testing you can use WE19.

How to create idoc?

*WE30 - you can create a IDOC type

For more information in details on the same along with the examples can be viewed on:

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm

http://www.sappoint.com/presentation.html

http://www.allsaplinks.com/idoc_search.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://www.erpgenie.com/sapedi/idoc_abap.htm

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30 )

Create Message Type ( WE81 )

Assign Idoc Type to Message Type ( WE82 )

Creating a Segment

Go to transaction code WE31

Enter the name for your segment type and click on the Create icon

Type the short text

Enter the variable names and data elements

Save it and go back

Go to Edit -> Set Release

Follow steps to create more number of segments

Create IDOC Type

Go to transaction code WE30

Enter the Object Name, select Basic type and click Create icon

Select the create new option and enter a description for your basic IDOC type and press enter

Select the IDOC Name and click Create icon

The system prompts us to enter a segment type and its attributes

Choose the appropriate values and press Enter

The system transfers the name of the segment type to the IDOC editor.

Follow these steps to add more number of segments to Parent or as Parent-child relation

Save it and go back

Go to Edit -> Set release

Create Message Type

Go to transaction code WE81

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter

Click New Entries to create new Message Type

Fill details

Save it and go back

Assign Message Type to IDoc Type

Go to transaction code WE82

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.

Click New Entries to create new Message Type.

Fill details

Save it and go back

Check these out..

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

ALE/ IDOC

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

go trough these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...

1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.

2.IDOCs are independent of the sending and receiving systems.

3.IDOCs are independent of the direction of data exchange.

The two available process for IDOCs are

Outbound Process

Inbound Process

AND There are basically two types of IDOCs.

Basic IDOCs

Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.

Extended IDOCs

Extending the functionality by adding more segments to existing Basic IDOCs.

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30)

Create Message Type ( WE81)

Assign Idoc Type to Message Type ( WE82)

imp links

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

www.sappoint.com

--here u can find the ppts and basic seetings for ALE

http://sappoint.com/presentation.html

www.sapgenie.com

http://www.sapgenie.com/ale/index.htm

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

Try this..Hope this will help.

>>>> SAP ALE & IDOC<<<<

Steps to configuration(Basis) >>

1. Create Logical System (LS) for each applicable ALE-enabled client

2. Link client to Logical System on the respective servers

3. Create background user, to be used by ALE(with authorizaton for ALE postings)

4. Create RFC Destinations(SM59)

5. Ports in Idoc processing(WE21)

6. Generate partner profiles for sending system

The functional configuration(Tcode: SALE)

• Create a Customer Distribution Model (CDM);

• Add appropriate message types and filters to the CDM;

• Generate outbound partner profiles;

• Distribute the CDM to the receiving systems; and

• Generate inbound partner profiles on each of the clients.

Steps to customize a new IDoc >>>

1. Define IDoc Segment (WE31)

2. Convert Segments into an IDoc type (WE30)

3. Create a Message Type (WE81)

4. Create valid Combination of Message & IDoc type(WE82)

5. Define Processing Code(WE41 for OUT / WE42 for IN)

6. Define Partner Profile(WE20)

Important Transaction Codes:

SALE - IMG ALE Configuration root

WE20 - Manually maintain partner profiles

BD64 - Maintain customer distribution model

BD71 - Distribute customer distribution model

SM59 - Create RFC Destinations

BDM5 - Consistency check (Transaction scenarios)

BD82 - Generate Partner Profiles

BD61 - Activate Change Pointers - Globally

BD50 - Activate Change Pointer for Msg Type

BD52 - Activate change pointer per change.doc object

BD59 - Allocation object type -> IDOC type

BD56 - Maintain IDOC Segment Filters

BD53 - Reduction of Message Types

BD21 - Select Change Pointer

BD87 - Status Monitor for ALE Messages

BDM5 - Consistency check (Transaction scenarios)

BD62 - Define rules

BD79 - Maintain rules

BD55 - Defining settings for IDoc conversion

WEDI - ALE IDoc Administration

WE21 - Ports in Idoc processing

WE60 - IDoc documentation

SARA - IDoc archiving (Object type IDOC)

WE47 - IDoc status maintenance

WE07 - IDoc statistics

BALE - ALE Distribution Administration

WE05 - IDoc overview

BD87 - Inbound IDoc reprocessing

BD88 - Outbound IDoc reprocessing

BDM2 - IDoc Trace

BDM7 - IDoc Audit Analysis

BD21 - Create IDocs from change pointers

SM58 - Schedule RFC Failures

Basic config for Distributed data:

BD64: Maintain a Distributed Model

BD82: Generate Partner Profile

BD64: Distribute the distribution Model

Programs

RBDMIDOC – Creating IDoc Type from Change Pointers

RSEOUT00 – Process all selected IDocs (EDI)

RBDAPP01 - Inbound Processing of IDocs Ready for Transfer

RSARFCEX - Execute Calls Not Yet Executed

RBDMOIND - Status Conversion with Successful tRFC Execution

RBDMANIN - Start error handling for non-posted IDocs

RBDSTATE - Send Audit Confirmations

FOr testing you can use WE19.

Check these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm

http://www.sapgenie.com/sapedi/index.htm

http://www.allsaplinks.com/idoc_sample.html

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

Please check this PDF documents for ALE and IDoc.

http://www.sappoint.com/abap/ale.pdf

http://www.sappoint.com/abap/ale2.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf

http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

<b>Reward points for useful Answers</b>

Regards

Anji

Former Member
0 Kudos
57

hi Ravik

just refer to the link below for

<b>step by step procedure with screen shots</b>

http://www.sapmaterial.com/?gclid=CN322K28t4sCFQ-WbgodSGbK2g

i have one very good doc. please give ur mail id. i will send it to u.

regards

ravish

<b>plz dont forget to reward points if helpful</b>

0 Kudos
57

Hi Ravish ,

tHANKS FOR UR RESPONSE I HEARE BY SENDING MY MAIL ID PLS SEND ME THAT IDOC SCENARIO

kravi331@gmail.com,

ravee.kk@gmail.com

thanks&regards

Ravi