Drill down ALV

[Former Member]

Hi ,

Could someone tell me what are the FM's to be used for drill down ALV's.

[Former Member]

REUSE_ALV_HIERSEQ_LIST_DISPLAY*

Hierarchical sequential list output

Functionality :

This module outputs two internal tables as a formated hierarchical-sequential list.

Principle:

Pass an internal table containing the set of header information to be output.

Pass an internal table containing the set of item information to be output.

Pass a structure containing the general list layout details

Pass a field catalog in the form of an internal table. The field catalog describes the fields to be output in the list.

Check this thread.

Regards,

Maha

[Former Member]

Hi

TABLES: vbak .

TABLES: mara .

TYPES: BEGIN OF tp_vbak ,

vbeln TYPE vbak-vbeln,

erdat TYPE vbak-erdat,

erzet TYPE vbak-erzet,

ernam TYPE vbak-ernam,

vbtyp TYPE vbak-vbtyp,

trvog TYPE vbak-trvog,

auart TYPE vbak-auart,

lifsk TYPE vbak-lifsk,

faksk TYPE vbak-faksk,

waerk TYPE vbak-waerk,

vkorg TYPE vbak-vkorg,

kunnr TYPE vbak-kunnr,

vgbel TYPE vbak-vgbel,

vgtyp TYPE vbak-vgtyp,

END OF tp_vbak .

TYPES: BEGIN OF tp_mara ,

matnr TYPE mara-matnr,

END OF tp_mara .

TYPES: BEGIN OF tp_alv1_data.

INCLUDE TYPE tp_vbak .

TYPES: END OF tp_alv1_data.

TYPES: BEGIN OF tp_alv2_data.

INCLUDE TYPE tp_mara .

TYPES: END OF tp_alv2_data.

TYPE-POOLS: slis.

DATA: gt_vbak TYPE STANDARD TABLE OF tp_vbak WITH HEADER LINE.

DATA: gt_mara TYPE STANDARD TABLE OF tp_mara WITH HEADER LINE.

DATA: gs_variant LIKE disvariant.

DATA: gt_alv1_data TYPE STANDARD TABLE OF tp_alv1_data WITH HEADER LINE.

DATA: gt_alv2_data TYPE STANDARD TABLE OF tp_alv2_data WITH HEADER LINE.

\*----

---

*

\* SELECTION-SCREEN *

\*----

---

*

\*----

---

*

\* BLOCK b0 *

\*----

---

*

SELECTION-SCREEN BEGIN OF BLOCK b0 WITH FRAME.

SELECT-OPTIONS: s_vbeln FOR vbak-vbeln. "<field not defined?>

PARAMETERS: p_matnr LIKE mara-matnr. "<field not defined?>

SELECTION-SCREEN END OF BLOCK b0.

\*----

---

*

\* BLOCK bvar *

\*----

---

*

SELECTION-SCREEN BEGIN OF BLOCK bvar WITH FRAME.

PARAMETERS: p_vari LIKE disvariant-variant.

SELECTION-SCREEN END OF BLOCK bvar.

\*----

---

*

\* BLOCK bbox *

\*----

---

*

SELECTION-SCREEN BEGIN OF BLOCK bbox WITH FRAME.

PARAMETERS: p_box_up RADIOBUTTON GROUP b1,

p_box_do RADIOBUTTON GROUP b1 DEFAULT 'X',

p_box_no RADIOBUTTON GROUP b1.

SELECTION-SCREEN END OF BLOCK bbox.

\*----

---

*

\* AT SELECTION-SCREEN ON P_VARI *

\*----

---

*

AT SELECTION-SCREEN ON p_vari.

PERFORM alv_variant_existence USING p_vari

CHANGING gs_variant.

\*----

---

*

\* AT SELECTION-SCREEN ON VALUE REQUEST FOR P_VARI *

\*----

---

*

AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.

PERFORM alv_variant_f4 CHANGING p_vari

gs_variant.

\*----

---

*

\* INITIALIZATION *

\*----

---

*

INITIALIZATION.

\*----

---

*

\* START-OF-SELECTION *

\*----

---

*

START-OF-SELECTION.

PERFORM authority_check.

PERFORM get_control_data.

PERFORM get_transaction_data.

PERFORM process_transaction_data.

\*----

---

*

\* END-OF-SELECTION *

\*----

---

*

END-OF-SELECTION.

PERFORM output_data.

\*----

---

*

\* F O R M S *

\*----

---

*

\*----

---

*

\* FORM AUTHORITY_CHECK *

\*----

---

*

\* Perform authority checks for the report *

\*----

---

*

FORM authority_check.

\* \!!! Note: authorisation checks are application-dependent.

• \!!! Some common cases are listed below - please select one of them

• \!!! or add new authorisation checks.

• \!!! If the report is creating batch input session or using LDB

• \!!! it may be sufficient to use automatic SAP auth.checks.

\* Authorisation for displaying documents in a single company code

• \---------------------------------------------------------------

• authority-check object 'F_BKPF_BUK'

• id 'BUKRS' field p_bukrs

• id 'ACTVT' field '03'.

• if sy-subrc 0.

• message e001(z9) with 'No authorisation to display documents'

• 'in company code' p_bukrs.

• endif.

\* Displaying documents from a list of company codes (select-options)

• \------------------------------------------------------------------

• call function 'Y_BUKRS_AUTHORITY_CHECK'

• EXPORTING

• ACTVT = '03'

• NOMESSAGE = ' '

• tables

• s_bukrs = s_bukrs.

ENDFORM. " AUTHORITY_CHECK

\*----

---

*

\* FORM GET_CONTROL_DATA *

\*----

---

*

\* Read configuration etc. *

\*----

---

*

FORM get_control_data.

ENDFORM. " GET_CONTROL_DATA

\*----

---

*

\* FORM GET_TRANSACTION_DATA *

\*----

---

*

\* Read documents etc. *

\*----

---

*

FORM get_transaction_data.

\* \!!! Data selection statement below has been generated automatically.

• \!!! Please check if it is correct and complete.

• \!!! Use table joins or 'SELECT FOR ALL ENTRIES' when selecting data

• \!!! from related tables.

SELECT

vbeln

erdat

erzet

ernam

FROM vbak

INTO CORRESPONDING FIELDS OF TABLE gt_vbak

.

CHECK NOT gt_vbak[] IS INITIAL.

SELECT

matnr

FROM mara

INTO CORRESPONDING FIELDS OF TABLE gt_mara

FOR ALL ENTRIES IN gt_vbak

WHERE ernam = gt_vbak-ernam

.

ENDFORM. " GET_TRANSACTION_DATA

\*----

---

*

\* FORM PROCESS_TRANSACTION_DATA *

\*----

---

*

\* ........ *

\*----

---

*

FORM process_transaction_data.

LOOP AT gt_vbak .

MOVE-CORRESPONDING gt_vbak TO gt_alv1_data .

APPEND gt_alv1_data .

ENDLOOP.

FREE gt_vbak .

LOOP AT gt_mara .

MOVE-CORRESPONDING gt_mara TO gt_alv2_data .

APPEND gt_alv2_data .

ENDLOOP.

FREE gt_mara .

ENDFORM. " PROCESS_TRANSACTION_DATA

\*----

---

*

\* FORM OUTPUT_DATA *

\*----

---

*

\* ........ *

\*----

---

*

FORM output_data.

PERFORM alv_list_display.

ENDFORM. " OUTPUT_DATA

\*----

---

*

\* FORM DISPLAY_RECORD *

\*----

---

*

\* Display object associated with the current ALV line *

\*----

---

*

FORM display_record USING is_selfield TYPE slis_selfield.

READ TABLE gt_alv1_data INDEX is_selfield-tabindex.

CHECK sy-subrc = 0.

\* \!!! SAMPLE IMPLEMENTATION FOR DISPLAYING FI DOCUMENTS:

SET PARAMETER ID 'BUK' FIELD gt_alv1_data-vbeln.

\* set parameter id 'BLN' field gt_alv1_data-belnr.

• set parameter id 'GJR' field gt_alv1_data-gjahr.

CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.

ENDFORM. " DISPLAY_RECORD

\*----

---

*

\* FORM ALV_LIST_DISPLAY *

\*----

---

*

\* Invoke main ALV function to format and show the report *

\*----

---

*

FORM alv_list_display.

DATA: ls_layout TYPE slis_layout_alv,

ls_print TYPE slis_print_alv,

ls_keyinfo TYPE slis_keyinfo_alv,

lt_fieldcat TYPE slis_t_fieldcat_alv,

lt_exctab TYPE slis_t_extab,

lt_sorttab TYPE slis_t_sortinfo_alv,

lt_events TYPE slis_t_event.

PERFORM alv_init_report_events TABLES lt_events.

PERFORM alv_init_report_layout TABLES lt_fieldcat

lt_exctab

lt_sorttab

CHANGING ls_layout

ls_print

ls_keyinfo.

CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'

EXPORTING

i_interface_check = ' '

i_callback_program = sy-cprog

is_layout = ls_layout

it_fieldcat = lt_fieldcat

it_excluding = lt_exctab

\* IT_SPECIAL_GROUPS =

it_sort = lt_sorttab

\* IT_FILTER =

• IS_SEL_HIDE =

• I_SCREEN_START_COLUMN = 0

• I_SCREEN_START_LINE = 0

• I_SCREEN_END_COLUMN = 0

• I_SCREEN_END_LINE = 0

• I_DEFAULT = 'X'

i_save = 'A'

is_variant = gs_variant

it_events = lt_events

\* IT_EVENT_EXIT =

i_tabname_header = 'GT_ALV1_DATA'

i_tabname_item = 'GT_ALV2_DATA'

\* I_STRUCTURE_NAME_HEADER =

• I_STRUCTURE_NAME_ITEM =

is_keyinfo = ls_keyinfo

is_print = ls_print

\* IS_REPREP_ID =

• IMPORTING

• E_EXIT_CAUSED_BY_CALLER =

• ES_EXIT_CAUSED_BY_USER =

TABLES

t_outtab_header = gt_alv1_data

t_outtab_item = gt_alv2_data.

\* EXCEPTIONS

• PROGRAM_ERROR = 1

• OTHERS = 2

ENDFORM. " ALV_LIST_DISPLAY

\*----

---

*

\* FORM ALV_INIT_REPORT_LAYOUT *

\*----

---

*

\* Set up report layout definition for ALV_LIST_DISPLAY *

\*----

---

*

\* <-- OT_FIELDCAT list of fields *

• <-- OT_EXCTAB excluded menu options *

• <-- OT_SORTTAB sorting/grouping definition *

• <-- OS_LAYOUT global report layout settings *

• <-- OS_PRINT global report printout settings *

• <-- OS_KEYINFO itab key fields (required only for hier.lists) *

\*----

---

*

FORM alv_init_report_layout TABLES ot_fieldcat TYPE slis_t_fieldcat_alv

ot_exctab TYPE slis_t_extab

ot_sorttab TYPE slis_t_sortinfo_alv

CHANGING cs_layout TYPE slis_layout_alv

cs_print TYPE slis_print_alv

cs_keyinfo TYPE slis_keyinfo_alv.

\* add menu items to be excluded to ot_exctab.

REFRESH ot_exctab.

REFRESH ot_fieldcat.

REFRESH ot_sorttab.

\* \!!!

• \!!! List all ALV data fields for display here:

• \!!!

• DD-struct = data dictionary structure name

• DD-field = field of data dictionary structure

• itab = internal table for output data

• itab-field = internal table field name

• key = set to 'X' if key field

• sum = set to 'X' for totals

• hid = set to 'X' if field is initially hidden

• row = list row number (multi-line list if >1)

*

\* DD-struct DD-field itab itab-field key sum hid row

• \------------------------------------------------------------------

PERFORM alv_build_fieldcat TABLES ot_fieldcat USING:

'VBAK' 'VBELN' 'GT_ALV1_DATA' 'VBELN' ' ' ' ' ' ' 1 ,

'VBAK' 'ERDAT' 'GT_ALV1_DATA' 'ERDAT' ' ' ' ' ' ' 1 ,

'VBAK' 'ERZET' 'GT_ALV1_DATA' 'ERZET' ' ' ' ' ' ' 1 ,

'VBAK' 'ERNAM' 'GT_ALV1_DATA' 'ERNAM' ' ' ' ' ' ' 1.

PERFORM alv_build_fieldcat TABLES ot_fieldcat USING:

'MARA' 'MATNR' 'GT_ALV2_DATA' 'MATNR' ' ' ' ' ' ' 1 .

\* \!!!

• \!!! List all ALV data fields for sorting/grouping here

• \!!!

• itab = internal table for output data

• itab-field = internal table field name

• up = sort ascending

• down = sort descending

• grp = group by

• comp = group initially compressed

• pos = field position in sort sequence

*

\* itab field up down grp comp pos

• \---------------------------------------------------------------------

PERFORM alv_build_sorttab TABLES ot_sorttab USING:

'GT_ALV1_DATA' 'VBELN' 'X' ' ' ' ' ' ' 1.

PERFORM alv_build_sorttab TABLES ot_sorttab USING:

'GT_ALV2_DATA' 'MATNR' 'X' ' ' ' ' ' ' 1.

\* \!!! key definition - required only for hierarchical display (2 itabs)

cs_keyinfo-header01 = 'VBELN' .

cs_keyinfo-item01 = 'MATNR' .

\* \!!! See the declaration of type SLIS_LAYOUT_ALV and set the fields

• \!!! of OS_LAYOUT record to change list-level attributes

\* os_layout-no_colhead = 'X'. " no headings

cs_layout-zebra = 'X'. " stripped pattern

\* os_layout-no_vline = 'X'. " columns separated by space

• os_layout-totals_only = 'X'. " show only totals

• os_layout-totals_text = 'Total'. " totals line label

• os_layout-subtotals_text = 'Subtotal'. " subtotals line label

• os_layout-subtotals_text = 'Subtotal'. " subtotals line label

• os_layout-key_hotspot = 'X'. " keys as hotspot

• os_layout-expand_all = 'X'. " Expand all positions

• os_layout...

cs_print-no_print_selinfos = 'X'. " Skip selection statistics

cs_print-no_print_listinfos = 'X'. " Skip list statistics

\* os_print-...

ENDFORM. " INIT_REPORT_LAYOUT

\*----

---

*

\* FORM ALV_BUILD_FIELDCAT *

\*----

---

*

\* Format a single line for ALV_INIT_REPORT_LAYOUT *

\*----

---

*

FORM alv_build_fieldcat TABLES ot_fieldcat

USING iv_ref_tabname "ref to a table/field

iv_ref_fieldname

iv_tabname "actual table/field name

iv_fieldname

iv_key

iv_do_sum

iv_no_out

iv_row_pos.

\* status variables for auto-numbering of field column position

• (column number reset when a new table or row begins)

STATICS: sv_last_tabname TYPE slis_tabname,

sv_last_row_pos TYPE i,

sv_current_col TYPE i.

IF sv_last_tabname iv_tabname OR sv_last_row_pos iv_row_pos.

sv_current_col = 1.

ELSE.

ADD 1 TO sv_current_col.

ENDIF.

sv_last_tabname = iv_tabname.

sv_last_row_pos = iv_row_pos.

DATA: ls_fieldcat TYPE slis_fieldcat_alv.

DATA: lv_fieldname TYPE slis_fieldname.

lv_fieldname = iv_fieldname.

\* \!!!

• \!!! List all the special formatting requirements in cases below

• \!!!

• case lv_fieldname.

• when 'WRBTR'. "<-- link with currency required

• ls_fieldcat-cfieldname = 'WAERS'.

• ls_fieldcat-ctabname = iv_tabname.

*

\* when 'HKONT'. "<-- change default column header

• ls_fieldcat-seltext_s = 'GL Acc.'.

• ls_fieldcat-ddictxt = 'S'. " (S)hort (M)iddle (L)ong

*

\* when 'SOME_NUMBER' "<-- change number formatting

• ls_fieldcat-nosign = 'X'.

• ls_fieldcat-nozero = 'X'.

• ls_fieldcat-just = 'L'. " (L)eft (R)ight (C)enter

• endcase.

ls_fieldcat-ref_tabname = iv_ref_tabname.

ls_fieldcat-ref_fieldname = iv_ref_fieldname.

ls_fieldcat-tabname = iv_tabname.

ls_fieldcat-fieldname = iv_fieldname.

ls_fieldcat-key = iv_key.

ls_fieldcat-do_sum = iv_do_sum.

ls_fieldcat-no_out = iv_no_out.

ls_fieldcat-row_pos = iv_row_pos.

ls_fieldcat-col_pos = sv_current_col.

APPEND ls_fieldcat TO ot_fieldcat.

ENDFORM. " ALV_BUILD_FIELDCAT

\*----

---

*

\* FORM ALV_BUILD_SORTTAB *

\*----

---

*

\* Set up sorting information for ALV_INIT_REPORT_LAYOUT *

\*----

---

*

FORM alv_build_sorttab TABLES ot_sorttab TYPE slis_t_sortinfo_alv

USING iv_tabname TYPE slis_fieldname

iv_fieldname TYPE slis_fieldname

iv_up TYPE c

iv_down TYPE c

iv_subtot TYPE c

iv_comp TYPE c

iv_spos TYPE n.

ot_sorttab-spos = iv_spos.

ot_sorttab-fieldname = iv_fieldname.

ot_sorttab-tabname = iv_tabname.

ot_sorttab-up = iv_up.

ot_sorttab-down = iv_down.

ot_sorttab-subtot = iv_subtot.

ot_sorttab-comp = iv_comp.

APPEND ot_sorttab.

ENDFORM. " ALV_BUILD_SORTTAB

\*----

---

*

\* FORM ALV_INIT_REPORT_EVENTS *

\*----

---

*

\* Set up program events for ALV_LIST_DISPLAY *

\*----

---

*

\* <-- OT_EVENTS list of events and associated report subroutines *

\*----

---

*

FORM alv_init_report_events TABLES ot_events TYPE slis_t_event.

CLEAR ot_events.

REFRESH ot_events.

ot_events-name = slis_ev_user_command.

ot_events-form = 'USER_COMMAND'.

APPEND ot_events.

ot_events-name = slis_ev_pf_status_set.

ot_events-form = ''. "'PF_STATUS_SET'.

APPEND ot_events.

ot_events-name = slis_ev_top_of_list.

ot_events-form = 'TOP_OF_LIST'.

APPEND ot_events.

ot_events-name = slis_ev_end_of_list.

ot_events-form = 'END_OF_LIST'.

APPEND ot_events.

ot_events-name = slis_ev_top_of_page.

ot_events-form = 'TOP_OF_PAGE'.

APPEND ot_events.

ot_events-name = slis_ev_end_of_page.

ot_events-form = 'END_OF_PAGE'.

APPEND ot_events.

ot_events-name = slis_ev_foreign_top_of_page.

ot_events-form = ''.

APPEND ot_events.

ot_events-name = slis_ev_foreign_end_of_page.

ot_events-form = ''.

APPEND ot_events.

ot_events-name = slis_ev_top_of_coverpage.

ot_events-form = ''.

APPEND ot_events.

ot_events-name = slis_ev_end_of_coverpage.

ot_events-form = ''.

APPEND ot_events.

ot_events-name = slis_ev_before_line_output.

ot_events-form = ''.

APPEND ot_events.

ot_events-name = slis_ev_after_line_output.

ot_events-form = ''.

APPEND ot_events.

ot_events-name = slis_ev_caller_exit_at_start.

ot_events-form = ''.

APPEND ot_events.

ot_events-name = slis_ev_list_modify.

ot_events-form = ''.

APPEND ot_events.

ot_events-name = slis_ev_subtotal_text.

ot_events-form = ''.

APPEND ot_events.

ENDFORM. " ALV_INIT_REPORT_EVENTS

\*----

---

*

\* FORM USER_COMMAND *

\*----

---

*

\* Subroutine attached as callback form to ABAP List Viewer *

• --> UCOMM - user command code passed from ALV *

• --> SELFIELD - information record describing current line/field *

\*----

---

*

FORM user_command USING value(iv_ucomm) LIKE sy-ucomm

is_selfield TYPE slis_selfield.

CASE iv_ucomm.

WHEN '&IC1'. "ALV record selection

PERFORM display_record USING is_selfield.

\* when ...

• ...

ENDCASE.

ENDFORM. " USER_COMMAND

\*----

---

*

\* FORM PF_STATUS_SET *

\*----

---

*

\* Subroutine attached as callback form to ABAP List Viewer, *

• allows setting alternative menu. If necessary: *

• 1. Copy 'STANDARD' menu from SAPLKKBL and modify as required, *

• 2. Activate callback *

\*----

---

*

FORM pf_status_set USING it_exctab TYPE slis_t_extab.

\* set pf-status 'STANDARD' excluding it_exctab.

ENDFORM. " PF_STATUS_SET

\*----

---

*

\* FORM TOP_OF_LIST *

\*----

---

*

\* Subroutine attached as callback form to ABAP List Viewer, *

• executed once at the start of list output. *

\*----

---

*

FORM top_of_list.

DATA: lt_seltab TYPE STANDARD TABLE OF rsparams WITH HEADER LINE.

DATA: lv_report LIKE sy-repid.

lv_report = sy-repid. "do not pass sy-repid to function!

IF p_box_up = 'X'. "display select options at report start

CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'

EXPORTING

curr_report = lv_report

TABLES

selection_table = lt_seltab.

\* remove 'technical' parameters with 'DELETE LT_SELTAB WHERE...'

• before display, if necessary

CALL FUNCTION 'RS_LIST_SELECTION_TABLE'

EXPORTING

report = lv_report

seltext = 'X'

\* dyn_range =

newpage = ' '

\* screennr = 1000

TABLES

sel_tab = lt_seltab

EXCEPTIONS

sel_tab_empty = 1.

ENDIF. "p_box_up = 'X'

ENDFORM. " TOP_OF_LIST

\*----

---

*

\* FORM END_OF_LIST *

\*----

---

*

\* Subroutine attached as callback form to ABAP List Viewer *

• executed once at the end of list output. *

\*----

---

*

FORM end_of_list.

DATA: lt_seltab TYPE STANDARD TABLE OF rsparams WITH HEADER LINE.

DATA: lv_report LIKE sy-repid.

lv_report = sy-repid. "do not pass sy-repid to function!

IF p_box_do = 'X'. "display select options at report end

CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'

EXPORTING

curr_report = lv_report

TABLES

selection_table = lt_seltab.

\* remove 'technical' parameters with 'DELETE LT_SELTAB WHERE...'

• before display, if necessary

CALL FUNCTION 'RS_LIST_SELECTION_TABLE'

EXPORTING

report = lv_report

seltext = 'X'

\* dyn_range =

newpage = ' '

\* screennr = 1000

TABLES

sel_tab = lt_seltab

EXCEPTIONS

sel_tab_empty = 1.

ENDIF. "p_box_do = 'X'

ENDFORM. " END_OF_LIST

\*----

---

*

\* FORM TOP_OF_PAGE *

\*----

---

*

\* Subroutine attached as callback form to ABAP List Viewer *

\*----

---

*

FORM top_of_page.

\* standard Ingram Micro report page heading

DATA: lv_coco_pos TYPE i, "CurPos of 'Company confidential'

lv_title_pos TYPE i, "CurPos of report title

lv_title(70) TYPE c, "Truncated report title

lv_page_pos TYPE i, "CurPos of page number

lv_date_pos TYPE i, "CurPos of date and time

lv_page_no(10) TYPE c,

lv_date(25) TYPE c,

lv_time(20) TYPE c,

lv_page(10) TYPE c.

\* We may need to truncate title if the line size is < 81.

IF sy-linsz < 81.

lv_title = sy-title+0(50).

ELSE.

lv_title = sy-title.

ENDIF.

\* Decide on positioning of text depending on width of page

lv_title_pos = ( sy-linsz / 2 ) - ( STRLEN( lv_title ) / 2 ).

lv_coco_pos = sy-linsz - 20.

FORMAT COLOR COL_HEADING INTENSIFIED ON.

WRITE: / 'Ingram Micro',

AT lv_title_pos lv_title,

AT lv_coco_pos 'Company Confidential'.

\* Setup data correctly in the correct format for the display fields.

lv_page = sy-pagno.

SHIFT lv_page LEFT DELETING LEADING ' '.

CONCATENATE sy-datum+6(2) sy-datum+4(2) sy-datum+0(4)

INTO lv_date SEPARATED BY '.'.

CONCATENATE sy-uzeit+0(2) ':' sy-uzeit+2(2) INTO lv_time.

CONCATENATE lv_date lv_time INTO lv_date SEPARATED BY ' '.

CONCATENATE 'Page' lv_page INTO lv_page_no SEPARATED BY ' '.

\* Decide on positioning of text depending on width of page.

lv_page_pos = sy-linsz - ( STRLEN( lv_page_no ) ).

WRITE: / lv_date,

AT lv_page_pos lv_page_no.

ULINE.

ENDFORM. " TOP_OF_PAGE

\*----

---

*

\* FORM END_OF_PAGE *

\*----

---

*

\* Subroutine attached as callback form to ABAP List Viewer *

\*----

---

*

FORM end_of_page.

ENDFORM. " END_OF_PAGE

*----

---

\* Form ALV_VARIANT_EXISTENCE

*----

---

\* Reads ALV variant definition

*----

---

FORM alv_variant_existence USING iv_variant LIKE disvariant-variant

CHANGING os_variant LIKE disvariant.

CHECK NOT iv_variant IS INITIAL.

os_variant-report = sy-repid.

os_variant-variant = iv_variant.

IF iv_variant CP '/*'. "user-specific variants begin with slash

os_variant-username = sy-uname.

ENDIF.

CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'

EXPORTING

i_save = 'A'

CHANGING

cs_variant = os_variant

EXCEPTIONS

wrong_input = 1

not_found = 2

program_error = 3

OTHERS = 4.

IF sy-subrc 0.

MESSAGE e001(z9) WITH 'Please select a valid display variant.'.

ENDIF.

ENDFORM. " ALV_VARIANT_EXISTENCE

\*----

---

*

\* FORM ALV_VARIANT_F4 *

\*----

---

*

\* Display list of layout variants on report selection screen *

\*----

---

*

FORM alv_variant_f4 CHANGING cv_varname LIKE disvariant-variant

cs_variant LIKE disvariant.

DATA: lv_exit(1) TYPE c.

cs_variant-report = sy-repid.

CALL FUNCTION 'REUSE_ALV_VARIANT_F4'

EXPORTING

is_variant = cs_variant

i_save = 'A'

\* it_default_fieldcat =

IMPORTING

e_exit = lv_exit

es_variant = cs_variant

EXCEPTIONS

not_found = 2.

IF sy-subrc = 2.

MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno

WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.

ELSE.

IF lv_exit = space.

cv_varname = cs_variant-variant.

ENDIF.

ENDIF.

or check this coding too

• Global ALV Data Declarations

type-pools: slis.

\* Internal Tables

data: begin of itab occurs 0,

matnr type mara-matnr,

maktx type makt-maktx,

end of itab.

start-of-selection.

perform get_data.

perform call_alv.

*********************************************************************

\* Form GET_DATA

*********************************************************************

form get_data.

select mara_{matnr makt}maktx

into corresponding fields of table itab

from mara

inner join makt

on mara_{matnr = makt}matnr

up to 20 rows.

endform.

************************************************************************

\* CALL_ALV

************************************************************************

form call_alv.

data: ifc type slis_t_fieldcat_alv.

data: xfc type slis_fieldcat_alv.

data: repid type sy-repid.

repid = sy-repid.

clear xfc. refresh ifc.

clear xfc.

xfc-reptext_ddic = 'Material Number'.

xfc-fieldname = 'MATNR'.

xfc-tabname = 'ITAB'.

xfc-outputlen = '18'.

append xfc to ifc.

clear xfc.

xfc-reptext_ddic = 'Material Description'.

xfc-fieldname = 'MAKTX'.

xfc-tabname = 'ITAB'.

xfc-outputlen = '40'.

append xfc to ifc.

\* Call ABAP List Viewer (ALV)

call function 'REUSE_ALV_GRID_DISPLAY'

exporting

i_callback_program = repid

i_callback_user_command = 'HANDLE_USER_COMMAND'

it_fieldcat = ifc

tables

t_outtab = itab.

endform.

***********************************************************************

\* FORM handle_User_Command *

***********************************************************************

form handle_user_command using r_ucomm like sy-ucomm

rs_selfield type slis_selfield.

case r_ucomm.

when '&IC1'.

case rs_selfield-FIELDNAME.

when 'MATNR'.

set parameter id 'MAT' field rs_selfield-value.

call transaction 'MD04' and skip first screen.

endcase.

endcase.

endform.

Regards

Pavan