Question Re: Installation error Composition Environment Preview in Technology Q&A

Installation error Composition Environment Preview

Former Member — Fri, 04 May 2007 09:27:55 GMT

Hi,

I have Windows XP Sp2. I have hat installed NW 7.1 (JE2) preview in was running.

After than I would like to install the review of Composition Environment Trial Version.

I get always the same Error. I make the decison to remove NW 7.1 preview.

Than I tray to install the CE Trial Version again.

The installation finishes with same error. Serious error during installation.

I remove the installation again --> start installation --> same Error.

I stop and run the services ServerX and SAP DB WWW during the installation --> same error.

I have no IDEA more!

Here is the text of this last log file.

: Loading systemtables returned with rc: 0

: End LOAD_SYS_TAB [com.sap.inst.maxdb.xpf.LoadSystab]

: rc: 0

: at: 2007.05.04 - 10.34.55[yyyy.MM.dd - HH.mm.ss]

: duration: 00:00:05[HH:mm:ss]

: Start LOG_AUTO_OVERWRITE [com.sap.inst.maxdb.xpf.LogAutoOverwrite]

: at: 2007.05.04 - 10.34.55[yyyy.MM.dd - HH.mm.ss]

: Reading from Variablehandler file variable : INSTALL_TYPE

: Reading from Variablehandler file variable : SDB/SYS_TYPE

: MaxDB tp already initialized.

: Turn on Log Auto Overwrite

: executeCommands(): Try to establish dbmcli session

: executeCommands() DBConnect: user_logon control,*****

: executeCommands(): db_state

: executeCommands(): State

ONLINE

: executeCommands(): Try to establish dbmcli session

: executeCommands() DBConnect: user_logon control,*****

: executeCommands(): db_state

: executeCommands(): State

ONLINE

: executeCommands(): util_execute set log auto overwrite on

: executeCommands():

: Turn on of Log Auto Overwrite return with rc: 0

: End LOG_AUTO_OVERWRITE [com.sap.inst.maxdb.xpf.LogAutoOverwrite]

: rc: 0

: at: 2007.05.04 - 10.34.55[yyyy.MM.dd - HH.mm.ss]

: duration: 00:00:00[HH:mm:ss]

: Start AUTO_EXTEND [com.sap.inst.maxdb.xpf.AutoExtendOn]

: at: 2007.05.04 - 10.34.55[yyyy.MM.dd - HH.mm.ss]

: Reading from Variablehandler file variable : INSTALL_TYPE

: Reading from Variablehandler file variable : SDB/SYS_TYPE

: MaxDB tp already initialized.

: Turn on Auto Extend

: executeCommands(): Try to establish dbmcli session

: executeCommands() DBConnect: user_logon control,*****

: executeCommands(): db_state

: executeCommands(): State

ONLINE

: executeCommands(): Try to establish dbmcli session

: executeCommands() DBConnect: user_logon control,*****

: executeCommands(): db_state

: executeCommands(): State ONLINE

: executeCommands(): auto_extend on

: executeCommands():

: Turn on of Auto Extend return with rc: 0

: End AUTO_EXTEND [com.sap.inst.maxdb.xpf.AutoExtendOn]

: rc: 0

: at: 2007.05.04 - 10.34.57[yyyy.MM.dd - HH.mm.ss]

: duration: 00:00:01[HH:mm:ss]

: Start CREATE_SQLUSER [com.sap.inst.maxdb.xpf.CreateSQLUser]

: at: 2007.05.04 - 10.34.57[yyyy.MM.dd - HH.mm.ss]

: Reading from Variablehandler file variable : INSTALL_TYPE

: Reading from Variablehandler file variable : SDB/SYS_TYPE

: MaxDB tp already initialized.

: Create SQL User

: Reading from Variablehandler file variable : SDB/SQL_USER

: Reading from Variablehandler file variable : SDB/PWD

: executeSQLCommands(): Run this command: CREATE USER SAPCE1DB PASSWORD ***** DBA NOT EXCLUSIVE DEFAULTCODE UNICODE

: createSQLUser()0

: Create SQL User returned with rc: 0

: End CREATE_SQLUSER [com.sap.inst.maxdb.xpf.CreateSQLUser]

: rc: 0

: at: 2007.05.04 - 10.34.57[yyyy.MM.dd - HH.mm.ss]

: duration: 00:00:00[HH:mm:ss]

: Start Create_Sqd_Sid_Os_User [com.sap.inst.maxdb.xpf.CreateSqdSidOsUser]

: at: 2007.05.04 - 10.34.57[yyyy.MM.dd - HH.mm.ss]

: Reading from Variablehandler file variable : INSTALL_TYPE

: Reading from Variablehandler file variable : SDB/SYS_TYPE

: MaxDB tp already initialized.

: Run on Windows, nothing to do here.

: End Create_Sqd_Sid_Os_User [com.sap.inst.maxdb.xpf.CreateSqdSidOsUser]

: rc: 0

: at: 2007.05.04 - 10.34.57[yyyy.MM.dd - HH.mm.ss]

: duration: 00:00:00[HH:mm:ss]

: {HOSTNAME=$(SYSTEM/HOSTNAME), ENGINE_SERVICE_OWNER=LOCAL SERVICE, INDEP_PROG_PATH=$(SDB/INDEP_PROG_PATH), INDEP_DATA_PATH=$(SDB/INDEP_DATA_PATH), SID=$(SAP_SID)}

: setACLWin on WIN with null(WIN MAX)

: setSecurityDescriptorForService on WIN with null(WIN MAX)

: Start PREPARE_AUTOSTART_DB [com.sap.xpf.controller.StepLibraryExecutionStep]

: at: 2007.05.04 - 10.34.57[yyyy.MM.dd - HH.mm.ss]

: execute step setSDBAutoStart

: setACLWin on WIN with null(WIN MAX)

: execute task setACLWin

: TASKENGINE: execute task setACLWin

: looking for method setPermission

: looking for method setNode

: looking for method setGroup

: set full controll for group LOCAL SERVICE on N:\sapdb\data\wrk

: End PREPARE_AUTOSTART_DB [com.sap.xpf.controller.StepLibraryExecutionStep]

: rc: 1

: at: 2007.05.04 - 10.35.06[yyyy.MM.dd - HH.mm.ss]

: duration: 00:00:09[HH:mm:ss]

: Error during executing

: End Controller

: at : 2007.05.04 - 10.35.06[yyyy.MM.dd - HH.mm.ss]

: durationt : 00:01:22[HH:mm:ss]

: status : ERROR

Re: Installation error Composition Environment Preview

roland_mallmann — Fri, 04 May 2007 16:44:24 GMT

Hi,

can you tell me:

a) which exact MaxDB version (incl. Build-nr.) is being used?

b) if you see any errors in the MaxDB logfiles (i.e. knldiag, knldiag.err or dbm.prt during the very same timeslot)? If yes, please post them in this thread.

Currently it seems there's a problem switching on the automatic start of the DB instance.

Regards,

Roland

Re: Installation error Composition Environment Preview

Former Member — Fri, 04 May 2007 18:15:32 GMT

HI Roland,

I'm not sure if I found the right parameters

---> Build 009-123-147-916

---> knldiag.err looks fine. was to big for posting

---> dbm.prt looks fine for me here the content

------------------------------------------------------------------------------
Date       Time     TID(hex)   Typ MsgID      Label    Message
------------------------------------------------------------------------------
2007-05-04 14:57:47 0x00000e08 INF        216 DBMSrv   DBM Server client connection (established at 2007-05-04 14:57:47): PID 0 on computer wernerg
2007-05-04 14:57:47 0x00000e08 INF        283 DBMSrv   command db_online 
2007-05-04 14:57:47 0x00000e08 INF        283 DBMSrv   command load_systab ...
2007-05-04 14:57:53 0x00000e08 INF        226 DBMSrv   DBM Server client disconnect: PID 0 on computer wernerg
2007-05-04 14:57:54 0x000007e4 INF        216 DBMSrv   DBM Server client connection (established at 2007-05-04 14:57:53): PID 0 on computer wernerg
2007-05-04 14:57:54 0x000007e4 INF        283 DBMSrv   command util_execute set log auto overwrite on
2007-05-04 14:57:54 0x000007e4 INF        226 DBMSrv   DBM Server client disconnect: PID 0 on computer wernerg
2007-05-04 14:57:54 0x000009a4 INF        216 DBMSrv   DBM Server client connection (established at 2007-05-04 14:57:54): PID 0 on computer wernerg
2007-05-04 14:57:54 0x000009a4 INF        283 DBMSrv   command auto_extend on
2007-05-04 14:57:55 0x000009a4 INF        226 DBMSrv   DBM Server client disconnect: PID 0 on computer wernerg
2007-05-04 19:59:25 0x00000790 INF        216 DBMSrv   DBM Server client connection (established at 2007-05-04 19:59:25): PID 3280 on computer wernerg
2007-05-04 19:59:25 0x00000790 INF        283 DBMSrv   command db_online 
2007-05-04 19:59:30 0x00000790 INF        226 DBMSrv   DBM Server client disconnect: PID 3280 on computer wernerg

--- > dbmvetdisp.prt looks strange for me


------------------------------------------------------------------------------
Date       Time     TID(hex)   Typ MsgID      Label    Message
------------------------------------------------------------------------------
2007-05-04 14:57:54 0x00000750 INF          4 DBMEd    using configuration file N:sapdbdatawrkCE1dbmsilevt.cfg
2007-05-04 14:57:54 0x00000750 INF          6 DBMEd    event with name DISPINFO:DISPSTART not dispatched (count 0)
2007-05-04 16:36:28 0x00000750 ERR         -4 DBMCli   wrong connection state
2007-05-04 16:36:28 0x00000750 INF          6 DBMEd    event with name DISPERR:CONNLOST not dispatched (count 1)
2007-05-04 16:36:28 0x00000750 INF          6 DBMEd    event with name DISPINFO:DISPSTOP not dispatched (count 2)
2007-05-04 16:36:28 0x00000750 INF          1 DBMEd    Event Dispatcher termination
2007-05-04 19:59:26 0x0000018c INF          4 DBMEd    using configuration file N:sapdbdatawrkCE1dbmsilevt.cfg
2007-05-04 19:59:26 0x0000018c INF          6 DBMEd    event with name DISPINFO:DISPSTART not dispatched (count 0)
2007-05-04 19:59:30 0x0000018c INF          6 DBMEd    event with name ONLINE not dispatched (count 1)

Further Info:

I have install the 7.0 Preview with the Enterprise portal J2E and this works fine.

I set all services to manual because both Server would start than. But at the installation of CE1 I only set ServerX to manual and "sap DB WWW" to manual.

Thanks for your fast answer.

Gunter

Re: Installation error Composition Environment Preview

roland_mallmann — Fri, 04 May 2007 20:04:58 GMT

Hi,

is the Service for the DB itself (SAPDB: CE1) also set to 'manual'? Did you test it on 'automatic' too?

Which user ist set as 'Log on' for that service entry, is it the Local System Account or another user?

Can you tell me if it the DB version is 7.5 or 7.6?

Regards,

Roland

Re: Installation error Composition Environment Preview

Former Member — Sat, 05 May 2007 04:43:46 GMT

Hi,

yes I had have switch the service CE1 to automatic during installation. But the same result.

the DB Version of CE1 is:

20070504 00145720 KERNELVERSION KERNEL 7.6.02 BUILD 009-123-147-916

the DB Version of J2E is:

20070504 00121516 KERNELVERSION KERNEL 7.6.00 BUILD 034-123-134-685

'Log on' is for both DB ( J2E and CE1) Local System Account.

Maybe there is problem because both DB are stored in the same path.

'n:\sapdb' and so also both use the folder program and data with subfolder.

It looks like that some files are used together.

I will uninstall CE1 again and try to install in sapdb2.

Regards,

Gunter

Re: Installation error Composition Environment Preview

Former Member — Sat, 05 May 2007 06:25:26 GMT

Hi,

I Can not install this DB to an other folder SAPDB is preset.

So I has no other Idea. I has the same problem on my main PC at home. Same situation same error. I also had a J2E DB installed before.

kind regards

Gunter

Re: Installation error Composition Environment Preview

roland_mallmann — Mon, 07 May 2007 17:12:34 GMT

Hi again,

can you please take a look at this thread and see if the workaround mentioned by Stefan works for you:

Regards,

Roland