Question Re: Errors in Integration Engine and Business Process Engine in Technology Q&A

Errors in Integration Engine and Business Process Engine

Former Member — Wed, 13 May 2015 05:36:38 GMT

Hi Masters,

I am facing a great trouble in testing any scenario in SAP PO 7.4. I have already tested a passthrough scenario on PI 7.3 and it worked perfect, but one of our client has installed the latest version of SAP PI i.e. PO 7.4 and when I tried to run the same passthrough scenario on PO 7.4, it left me with errors in Integration Engine as well as Business Process Engine.

Please find attached the error-screenshots for your reference -

1. Integration Engine Error:

After going through few documents posted on this issue, I have already tried searching for SXMS_CONF_ITEMS table in se16, se38 so as to compare the role of business system in SLD with that in table SXMS_CONF_ITEMS, align them with each other, but it says that such table doesn't exist. So, please help me find a solution to this problem.

2. Business Process Engine Error:

Waiting in Anticipation...

Thanks in advance.

Regards,

Anand

Re: Errors in Integration Engine and Business Process Engine

Dimitri — Wed, 13 May 2015 06:33:24 GMT

Hi,

You installed a new system, right?

Did you perform the post-installation steps?

Kind regards,

Dimitri

Re: Errors in Integration Engine and Business Process Engine

Former Member — Wed, 13 May 2015 07:30:13 GMT

Hi Dimitri,

Thanks for the reply but the basic post-installation steps are already handled by the SAP BASIS team. So please let me know what are the post-installation steps that I need to take care of, so as to confirm the same with my BASIS team?

Regards,

Anand

Re: Errors in Integration Engine and Business Process Engine

Dimitri — Wed, 13 May 2015 07:35:49 GMT

Have a look at https://websmp105.sap-ag.de/~form/handler?_APP=00200682500000002672&_EVENT=DISPLAY&_SCENARIO=&_HIER_KEY=5011000358700000… (SMP logon required).

Re: Errors in Integration Engine and Business Process Engine

Former Member — Wed, 13 May 2015 09:41:30 GMT

Hi Dimitri,

Please find attached the screenshot of the configuration wizard after the installation of the system as per done by the BASIS team after following steps indicated in the link below -

https://help.sap.com/saphelp_nw74/helpdata/en/48/a9b8cb7e28674be10000000a421937/content.htm

Please guide me about what should be my next step towards the issue I asked.

Regards,

Anand

Re: Errors in Integration Engine and Business Process Engine

Dimitri — Wed, 13 May 2015 11:37:49 GMT

I quickly checked our SAP PO 7.4 system and I see nothing strange.

Perhaps you should let your BASIS team have a closer look.

Seems like at installation time, something went wrong.

Re: Errors in Integration Engine and Business Process Engine

Former Member — Mon, 01 Jun 2015 05:04:34 GMT

Hi Dimitri,

I have worked on with the steps to check the readiness of our system PO 7.4 and after following the steps I was able to solve few of the issues in Business Process Engine but the errors in the Integration Engine remain unchanged.

I am updating the screenshots of BPE before and after following the Readiness-check steps of PO 7.4 for your referral-

Business Process Engine errors before following the Readiness check -

Autoomatic Workflow Cutomizing before following the Readiness check -

Automatic Workflow Customizing after following the Readiness check -

Business Process Engine errors after following the Readiness check -

Please also find attached the latest error-screenshots of the Integration Engine.

Integration Engine errors remain unchanged even after following the Readiness check steps -

To solve this issue I've got a help from a link as under -

Symptom

You have accessed the Component Monitor in Runtime Workbench. When selecting Integration Server > Integration Engine, the status of the "Are roles in SXMS_CONF_ITEMS and SLD consistent?" test is not "green".

Problem

The role of a business system in System Landscape Directory (SLD) is not consistent with data in local SXMS_CONF_ITEMS table.

Solution

Compare the role of a business system in SLD with that in table SXMS_CONF_ITEMS, align them with each other.

Additional Information

The role of a business system is defined centrally in the SLD. However, you can overwrite this setting locally in the SXMS_CONF_ITEMS table. The "Are roles in SXMS_CONF_ITEMS and SLD consistent?" test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.

I've tried the T-code SE11 where I do find the table SXMS_CONF_ITEMS, but I am not getting the way to check the consistency of roles in the table and SLD locally. The role that I've given for the business system in SLD Integration Server.

Please look into this issue back again and help me to resolve the problem as soon as possible because I am stuck and can't even test a single scenario.

Thanks in advance.

Regards,

Anand

Re: Errors in Integration Engine and Business Process Engine

Dimitri — Mon, 01 Jun 2015 07:22:37 GMT

Hi Anand,

Did you define your SAP PO system as a Business System in the SLD?

Something like INTEGRATION_ENGINE_JAVA_<SAPSID>

The role of that Business System must be integration server and the pipeline URL is like http://<host><port>/sap/xi/engine?type=entry

Kind regards,

Dimitri

Re: Errors in Integration Engine and Business Process Engine

Former Member — Mon, 01 Jun 2015 09:22:36 GMT

Hi Dimitri,

As you have said I've already created a business system in SLD as under -

Please let me know if I need to make any change with this. Also, request you to help me with the exact steps to be followed to compare the role of a business system in SLD with that in table SXMS_CONF_ITEMS. How to align them with each other?

Thanks for the reply.

Regards,

Anand

Re: Errors in Integration Engine and Business Process Engine

Dimitri — Mon, 01 Jun 2015 09:29:14 GMT

In your screenshot, I see different clients within system JPP.

I assume that JPP is your SAP PO system, correct?

You also have 2 Business Systems linked to technical system JPP. Both cannot be the integration server.

Re: Errors in Integration Engine and Business Process Engine

Former Member — Mon, 01 Jun 2015 11:29:46 GMT

Hi Dimitri,

Please find attached the updated error screenshots of BPE and IE after scheduling the job for deleting history -

IE error -

BPE error -

Also, I've fixed the business system in SLD as you said and now I'm having only one business system with the role as Integration Server.

Please help me with the above issues of IE and BPE.

Thanks for the reply.

Regards,

Anand

Re: Errors in Integration Engine and Business Process Engine

Dimitri — Mon, 01 Jun 2015 11:36:15 GMT

The IE error is still related to your Business Systems. Have a look at it again.

Or perhaps this is still an old error and the problem has been solved in the meantime.

For the BPE error, check Standard Users (Dual-Stack) - SAP NetWeaver Process Integration Security Guide - SAP Library

Re: Errors in Integration Engine and Business Process Engine

Former Member — Mon, 01 Jun 2015 11:45:38 GMT

Do I need to work only on the below for BPE -

And I've checked by refreshing the component monitor in the communication channel but the error for role consistency of a business system in SLD and that in SXMS_CONF_ITEMS is still their.

Thanks & Regards,

Anand

Re: Errors in Integration Engine and Business Process Engine

Dimitri — Mon, 01 Jun 2015 11:50:59 GMT

Check WF-BATCH and PIRWBJPP.

Also, check your SLD and make sure your Business Systems have a role assigned.

Be aware of the Business System with role application server. I guess you have a duplicate there.

For the BPE: schedule all necessary jobs.

Re: Errors in Integration Engine and Business Process Engine

Former Member — Tue, 02 Jun 2015 05:44:02 GMT

Hi Dimitri,

I've checked the users WF-BATCH and PIRWBJPP and the roles as asked are active. Also, the roles in the business system are properly assigned.

Please find attached the screenshots of the same.

WF-BATCH -

PIRWBJPP -

Roles assigned for the two business systems -

The errors in IE and BPE remain same i.e. -

1. Integration Engine -

1. Are roles in SXMS_CONF_ITEMS and SLD consistent?

2. Business Process Engine -

1. Schedule background job for clearing report

Please check with the above details and let me know if any change is required. Also, request you to give the details of all the necessary jobs to be scheduled for BPE and steps to follow the same.

Thanks for replying.

Regards,

Anand