Question Re: spool overflow, spool_internal_error in Technology Q&A

spool overflow, spool_internal_error

Former Member — Mon, 06 Apr 2015 09:23:12 GMT

All SAP BASIS experts,

I am facing a spool overflow problem. When user give any print command in QAS server, it is not completed. After some time error appear spool internal error / spool overflow problem. I am also checked data in RZ20-- SAP CCMS Monitor Templates -> Spool System. Here's showing used no. 100% & this is red colour.

After that I run SE38 & run RSPO0041 & RSPO0043, but no improvement. After that I am run & checked SNRO, their has no any abnormalities.

So please suugest me for resolve this issue. Due to this issue my system log folder also filled up & user not log in GUI. Resultant i m clear the logs manually on regular base.

For ref. print scrns as follows:-

Re: spool overflow, spool_internal_error

Former Member — Wed, 08 Apr 2015 06:52:12 GMT

Hi Deepak,

Few thing what I would do is...

1. Delete spools manually from SP01 and SPAD in urgent case.

2. Run RSPO1041 periodically for deleting spools older than say 7 days.

3. Perform consistency check using SP12.

4. Increase the SPO_NUM number range (SNRO) to higher limit according to the sap note 48284 which says 9,99,999 can be set and if your using latest kernel version than accoring to the sap note 1953355 the upper limit can be set to 20,00,000.

Regards,

Prithviraj.

Re: spool overflow, spool_internal_error

Former Member — Wed, 08 Apr 2015 10:57:55 GMT

Hi, Prithviraj ji,

Thanks for reply.

I am done this activity for increase the number range. But problem not solved.

Regards,

Deepak

Re: spool overflow, spool_internal_error

Former Member — Wed, 08 Apr 2015 12:10:11 GMT

Hi,

How about other steps, were they performed?

Regards,

Prithviraj.

Re: spool overflow, spool_internal_error

Former Member — Fri, 10 Apr 2015 05:37:34 GMT

Sir,

Now print command not working.Error shows:

Short Text: Internal error in spool system.

What happened : Error in SAP kernel. The current ABAP "RSORAHST" program had to be terminated because the ABAP processor detected on internal system error.

After that I am clear the snap shot from RSORAHST, but problem not solved.

Regards,

Deepak

Re: spool overflow, spool_internal_error

Former Member — Fri, 10 Apr 2015 06:21:58 GMT

Hi Deepak,

Could you please refer the following SAP Note:1888199 and let us know.

Regards,

Krishna

Re: spool overflow, spool_internal_error

Former Member — Fri, 10 Apr 2015 06:52:33 GMT

Dear Krishna ji,

Thanks for response. I am also followed above note. But no improvement. I am also attached prnt scrn for ref.

Regards,

Deepak

Re: spool overflow, spool_internal_error

Johan_sapbasis — Fri, 10 Apr 2015 09:30:16 GMT

Hi,

Also check your spool number ranges.

Go to tcode SNRO -> Object SPO_NUM -> Click on display -> Click on ranges -> View interval if your interval and rang are same i.e. 32000 of 32000 entries enlarge the number range.

ps: attached the st22 dump here

Kind Regards,

Johan

Re: spool overflow, spool_internal_error

Former Member — Fri, 10 Apr 2015 10:03:31 GMT

Hi Johan,

PFA as per required after enlarge the number range, but problem not solved.

Regards,

Deepak

Re: spool overflow, spool_internal_error

Johan_sapbasis — Fri, 10 Apr 2015 10:11:35 GMT

Hi Deepak,

Export ST22 file as non converted text and add here please.

Johan

Re: spool overflow, spool_internal_error

Former Member — Fri, 10 Apr 2015 10:29:28 GMT

Hi johan,

PFA as per requirement st22 non converted file

10.04.2015 Dynamic List Display 1

-------------------------------------------------------------------------------------------------------------------------------------------------------

Runtime Errors

-------------------------------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------------------------------

|10.04.2015|15:11:36|MBQAECC_QMB_00|DEEPAKK |200 |C |SPOOL_INTERNAL_ERROR | |BC-SRV-ALV |SAPLKKBL| 1 |5526EC9DAD6D00B8E1008000AC10015A|

|10.04.2015|11:02:23|MBQAECC_QMB_00|SAPADMIN|200 |C |SPOOL_INTERNAL_ERROR | |Not assigned |ZBC_FSDB|13 |5527590958C100BFE1008000AC10015A|

|10.04.2015|11:02:23|MBQAECC_QMB_00|SAPADMIN|200 |C |SPOOL_INTERNAL_ERROR | |Not assigned |ZBC_FSCI|14 |55273D0C3CA1003CE1008000AC10015A|

|10.04.2015|11:02:20|MBQAECC_QMB_00|SAPADMIN|200 |C |SPOOL_INTERNAL_ERROR | |Not assigned |ZBC_FSCI|15 |55276013600500A5E1008000AC10015A|

-------------------------------------------------------------------------------------------------------------------------------------------------------

Regards,

Deepak

Re: spool overflow, spool_internal_error

Johan_sapbasis — Fri, 10 Apr 2015 10:38:39 GMT

Hi Deepak,

Please confirm the jobs are scheduled as they should be with variants for deletion as well.

48400 - Reorganization of TemSe and spool

16083 - Standard jobs, reorganization jobs

1440439 - New Standard Jobs (2)

Also check that none of your filesystems are fully utilized.

Johan

Re: spool overflow, spool_internal_error

Former Member — Fri, 10 Apr 2015 11:00:01 GMT

HI Johan,

All are scheduled, but from last month suddenly this problem comes in QUALITY server. DEV & PRD working ok. I am also run these task manually, but problem not solved.

Regards,

Deepak

Re: spool overflow, spool_internal_error

Johan_sapbasis — Fri, 10 Apr 2015 11:09:36 GMT

Hi,

Attached the actual dump file here as an attachment please.

Johan

Re: spool overflow, spool_internal_error

Former Member — Fri, 10 Apr 2015 11:48:54 GMT

Hi Johan,

Hereas no any option for attachment the dump file. So I am paste its details as below:-

Runtime Errors         SPOOL_INTERNAL_ERROR
Date and Time          10.04.2015 15:11:36

Short text

Internal error in the spool system.

What happened?

Error in the SAP kernel.

The current ABAP "SAPLKKBL" program had to be terminated because the

ABAP processor detected an internal system error.

Error analysis

When calling the SAP spool system, an (unspecified) internal

error occurred.

More detailed description of error: "spool overflow "

Further information:

See below under "Spool error information".

Trigger Location of Runtime Error

Program SAPLKKBL

Include LKKBLF01

Row 439

Module type (FORM)

Module Name LIST_OUTPUT_NEW

Source Code Extract
Line	SourceCde
409	set handler gt_stack3-r_kkbl_print->handle_top_of_page
410	for gt_stack3-r_kkbl_events
411	activation space.
412
413	set handler gt_stack3-r_kkbl_print->handle_end_of_page
414	for gt_stack3-r_kkbl_events
415	activation space.
416	endif.
417
418	clear gt_stack3-r_kkbl_print.
419
420	else. "<<<Y6DK065711
421	if lflg_top_of_page = 'X' or
422	( ( gt_stack2-flg_append_mode = 'X'
423	or gt_stack-is_layout-block_mode = 'X'
424	) and
425	( not sy-subty o con_hex02 or
426	( gt_stack-is_layout-suppress_dynpro = 'X' and
427	lflg_new_page is initial ) ) ).
428
429	perform top_of_page2 using gt_stack-it_fieldcat "Y6DK065711
430	gt_stack-t_columns
431	gt_stack-is_layout
432	gt_stack-s_lprint
433	gt_stack2-s_header
434	gt_stack-listtype
435	gt_stack-i_callback_program
436	gt_stack-i_callback_top_of_page.
437	else.
438	* Provozieren des top_of_page Ereignisses
>>>>>	write space.
440	endif.
441	endif.
442	*--- Ende Top-of-page Handling
443
444	perform globals_for_output.
445	* Sichern Feldkatalog im Falle BEFORE_LINE_OUTPUT auf Zeilenbasis
446	* der Feldkatalog ver?dert wird
447	if not gt_stack2-i_callback_before_line_output is initial.
448	gt_fieldcat_sav[] = gt_stack-it_fieldcat[].
449	endif.
450	clear gflg_fc_changed.
451
452	stop_here con_bp-il2.
453	*--- Listenausgabe einfache Liste
454	if gt_stack-listtype = con_listtype-simple.
455	if gt_stack-is_layout-no_unit_splitting is initial and
456	gflg_safety is initial.
457	perform data_out_simple tables rt_outtab
458	using l_line

Regards,

Deepak

Re: spool overflow, spool_internal_error

Johan_sapbasis — Fri, 10 Apr 2015 12:01:29 GMT

Hi,

You must open the actual st22 dump file then do this:

Then you save as unconverted.

Kind Regards,

Re: spool overflow, spool_internal_error

Former Member — Fri, 10 Apr 2015 12:07:54 GMT

Hi Johan,

I have this file. But no any option show in scn.sap.com for attachment this type file. Here has only Image & video attachment option appearing.

Regards,

Deepak

Re: spool overflow, spool_internal_error

Johan_sapbasis — Fri, 10 Apr 2015 12:16:03 GMT

Hi,

Click the Use Advanced Editor on the far right of your name this will give you option to choose and upload files.

Johan

Re: spool overflow, spool_internal_error

Johan_sapbasis — Fri, 10 Apr 2015 12:35:45 GMT

Whilst I am waiting for the attacment:

Go to SE38 enter RSPO1041 by program name and click on with variant

Now select the SAP standard variant SAP&001

When the variant is open change the options for the following:

You can change the values as required make sure the or and obsolete options are ticked.

Without Output reques older than 5 days or obsolete

In processing older than 10 days or obsolete

Completed older than 10 days or obsolete

Incorrect older than 10 days or obsolete

Calender includer all days

System name *

Then execute in background.

Kind Regards,

Re: spool overflow, spool_internal_error

Laszlo_B — Fri, 10 Apr 2015 13:27:11 GMT

Hello Deepak,

there is a known bug with some kernel versions that no new spool numbers can be used. This will have the effect that when the R/3 spooler requests a new spool number from the number range object SPO_NUM, it simply won't give any numbers.

To be more specific: when SPO_NUM has reached the top of its interval, it simply can not roll over to the lowest value again. This will result in "Spool full" errors.

In your attachments I couldn't see which kernel version is used, but according to SAP Note #1954264 - "NU: Error when rolling over a number range object" the first affected kernel versions are

Kernel 720/518
Kernel 721/210.

According to this Note this bug has been fixed with

Kernel 720/520
Kernel 721/211.

Check this Note whether your system is affected.

Best regards,

Laszlo