Question Re: Sync. doesnt work in NWClient on NWDS Simulator in Technology Q&A

Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 14:15:07 GMT

i have a problem in sync data from DOE to my Client ( Application )

I have created my Data Objects in the Data Orchestration Workbench. ( Import Bapi Wrappers as Data Object ). Is it important to create a device???

In the configuration of my client i have entered the ip, port, client and a device name ( test ).

So when i would to sync, which password i have enter? I get the password of my SAP user.

Then i get the message:

Sync Status: Failed

Error: Error code - 22: Error while registering

Message: Post synchronization complete.

Is my sync. pass fault?

Thanks

hassan

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 14:20:46 GMT

Hi Hassan,

The device need to be created in DOE and enabled and the same name should be given from the client.

The sync user and password should be the user and pwd in DOE server who has the DOE sync role.

Regards,

Liji

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 14:31:20 GMT

Yes but there is another problem.

If i create a new device like a test device, it come the message:

Note

The following error text was processed in the system NW7 : CREATE DATA: The specified type is not a valid data type.

The error occurred on the application server sapnw71_NW7_00 and in the work process 4 .

The termination type was: RABAX_STATE

The ABAP call stack was:

Method: GET_USERS_FROM_CDS of program CL_SMMW_USER==================CP

Method: ONACTIONCREATE of program /1BCWDY/03N8T1EF81BPKHB00YE0==CP

Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/03N8T1EF81BPKHB00YE0==CP

Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP

Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP

Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP

Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP

Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP

Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP

Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP

Do you know this fault?

regards,

hassan

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 14:39:18 GMT

Hi,

Hope you have followed the initial steps mentioned in the configuration guide

[http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm]

like executing sdoe_sr, activating queues and activating sap basis rules.

Check in tcode : SDOE_WB whether the sap basis objects are showing generated successfully(green)

Specifically , the basis data objects, user details and user authorizations should be generated successfully.

Corresponding distribution rules needs to be activated.

Then follow the steps mentioned in the guide under "setting up users in DOE"

Once user details and user authorzation data is loaded to DOE , then you can create a device from admin portal.

Regards,

Liji

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 14:41:10 GMT

Hi,

Check whether all SAP BASIS data objects are active and generated properly.

Do an initial download for USER DETAILS and USER AUTHORIZATION data objects.

For more details check the initial configuration guide of Mobile 7.1

http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm

Regards,

Dhana

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 14:59:53 GMT

Yes i have done all mentioned steps.

Only the step ( Upload the mobile client archive to the DOE ) is what i didn't follow.

I think this is for software packages and i dont need them.

In my Workbench my own Dataobject is green

the others are all yellow but active and in distribution model the object USERDETAILS_DM and Distmodel_Agent have a lightning.

regards, hassan

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 15:02:38 GMT

Hi Hassan,

The sap basis Data objects and DM needs to be green and active for the proper functioning of DOE.

May be there is a sysfail in the queue (SMQ2)

Can you trigger generation for basis data objects and corresponding DMs explicitly from sdoe_wb transcation?

Regards,

Liji

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 15:17:24 GMT

No not for Userdetails_DM, because there comes a message box "A prrevious generation has resulted an error in queue SDOE_GEN_00B_000.

USER_AUTH_DM is green

USER_AUTHORIZATION is green too

Should i restart the server?

regards, hassan

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 15:45:27 GMT

Hi ,

Can you go to SMQ2 and give the queue name 'SDOE_GEN_00B_000' and then click on unlock button.

CHeck if this getting executed successfully.

Regards,

Liji

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 16:03:15 GMT

Yes there was 3 queues with sysfail

I have unlocked all 3 and now there are with status "running"

And now? Have i regenerate the objects?

regards

hassan

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Wed, 03 Jun 2009 16:07:18 GMT

Hi Hassan,

These queues are doing the generation asynchronously.

Once the queues are finished, all the basis dataobjects and DMs should turn green.

Then you need to perform load for user userdetails and user authorization DOs from tcode : sdoe_load.

Once load is done, you can activate the rules from portal as mentioned in the configuration guide.

Then you can proceed with creation of device.

Regards,

Liji

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Thu, 04 Jun 2009 13:50:54 GMT

Hi Lija,

in my case the queues dont finish.

I dont know how to solve this problem. ( How to get the lights green )

It is only userdetails and agent config which are yellow.

Do you think it is about my user? I have one user which i give him all existing roles!

Is this ok?

regards,

Re: Sync. doesnt work in NWClient on NWDS Simulator

sivasatyaprasad_yerra — Thu, 04 Jun 2009 14:23:13 GMT

I think queues are not getting executed at all. select the queue and choose "reset status" option from the context menu. Then execute the queues again.

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Thu, 04 Jun 2009 14:32:39 GMT

Yes you have right

If i generate the DO " Agent_Config" it comes the status Sysfail in the queue. After the reset comes the same failure.

The problem is in the function module SMMW_BULK_ACTGEN_FM with the StatusText "Field Symbol has not been asigned yet"

If i test it ( Test/Execute ) the function need some parameter like mbo_id and activate and sync_gen.

In sync_gen is a default value. Whats with the others?

Which value there have to be assigned?

regards..

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Fri, 05 Jun 2009 01:18:38 GMT

Hi Hassan,

If the queues are ending up in sysfail everytime, then may be you can proceed generating

those 2 objects from workbench SDOE_WB explicitly.

Now if you are unable to do so from workbench due to some locks existing because of already

triggered generation , then try executing the report SDOE_LOCK_REPAIR from transaction SE38 ,

selecting the SWCV and Dataobject name(In your case SAP BAsis swcv and AGents ,

User Details Data objects) and executed.

After this , if the objects are inactive , then activate them or else try generating the

dataobjects and DM from SDOE_WB, opt for synchronous generation.

Regards,

Liji

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Fri, 05 Jun 2009 10:30:36 GMT

I have done this steps.

At first lock this data objects then generate them synchronos.

There happens nothing, the light shine yellow.

When i lock the data objects and generate them asynchronous the failure comes "unable to uniquly determine data objects" in the queue...

regards, hassan

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Fri, 05 Jun 2009 10:47:11 GMT

Hi,

After you perform repair lock and then activate/ regenerate the data object synchrounously , is there a message shown in the status bar?

Regards,

Liji

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Fri, 05 Jun 2009 10:57:35 GMT

Hi,

yes in the status bar is written "Unable to uniquely determine Data object"

Re: Sync. doesnt work in NWClient on NWDS Simulator

sivasatyaprasad_yerra — Fri, 05 Jun 2009 11:27:28 GMT

Check whether you performed the steps mentioned in SDOE_SR transaction.

If not perform the steps in this transaction and this process should take care of generating the objects.

Re: Sync. doesnt work in NWClient on NWDS Simulator

Former Member — Fri, 05 Jun 2009 11:57:22 GMT

I have generated this objects.

All objects installed successfully.

It shows a green light for every object