topic Re: Data not coming in Select Statement in Application Development and Automation Discussions

Data not coming in Select Statement

Former Member — Tue, 22 Apr 2008 10:52:03 GMT

Hi All,

In my coding, Invoice Date is not coming...

Plz check and tell...

****

REPORT ZSD06_TEST

NO STANDARD PAGE HEADING LINE-SIZE 255 MESSAGE-ID ZBDC.

TABLES : T100,

BKPF,

LIKP,

NASE.

DATA: L_MSTRING(480).

RANGES SELTAB FOR VBRK-VBELN.

RANGES SEL_RG_KSCHL FOR NASE-KSCHL.

RANGES RG_VBELN FOR VBRK-VBELN.

RANGES RG_KSCHL FOR NASE-KSCHL.

DATA: PM_VERMO LIKE NASE-VERMO.

DATA: BEGIN OF BDCDATA OCCURS 0.

INCLUDE STRUCTURE BDCDATA.

DATA: END OF BDCDATA.

DATA: BEGIN OF ITAB OCCURS 0,

VBELN LIKE LIKP-VBELN,

BOLNR LIKE LIKP-BOLNR,

BELNR LIKE RF05L-BELNR,

GJAHR LIKE RF05L-GJAHR,

ZFBDT(10) TYPE C,

END OF ITAB.

***********************************************************

DATA : LR_DATE TYPE FKDAT ,

INVOICE_DATE TYPE FKDAT .

*DATA : LR_DATE TYPE SY-DATUM,

data : INVOICE_DATE TYPE SY-DATUM,
V_DAYS TYPE SY-DATUM.

***********************************************************

DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

DATA LD_ANSWER.

CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'

EXPORTING

DEFAULTOPTION = 'N'

TEXTLINE1 = 'BDC to enter LR.NO & DATE in delivery,accounting doc.'

TEXTLINE2 = 'Do you want to continue ?'

TITEL = SY-TITLE

START_COLUMN = 25
START_ROW = 6

CANCEL_DISPLAY = ' '

IMPORTING

ANSWER = LD_ANSWER

EXCEPTIONS

OTHERS = 0.

IF LD_ANSWER NE 'J'.

MESSAGE S001.

LEAVE PROGRAM.

ENDIF.

CALL FUNCTION 'GUI_UPLOAD'

EXPORTING

FILENAME = 'C:\LRDETAIL.txt'

FILETYPE = 'ASC'

HAS_FIELD_SEPARATOR = 'X'

HEADER_LENGTH = 0

READ_BY_LINE = 'X'

DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =

TABLES

DATA_TAB = ITAB

EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

LOOP AT ITAB.

CONCATENATE '00' ITAB-VBELN INTO ITAB-VBELN.

SELECT SINGLE * FROM LIKP WHERE VBELN = ITAB-VBELN.

READ TABLE ITAB INDEX 1.

**********************************************************************************************************

CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = INVOICE_DATE
I_DATE_TO = ITAB-ZFBDT
E_DAYS = V_DAYS.

IF V_DAYS > 0.

SELECT SINGLE FKDAT INTO INVOICE_DATE FROM VBRK WHERE VBELN = ITAB-VBELN.

IF ITAB-ZFBDT LT INVOICE_DATE.

MESSAGE 'invalid data' TYPE 'S'.

ENDIF.

**********************************************************************************************************

IF SY-SUBRC <> 0.

MESSTAB-TCODE = 'VL02N'.MESSTAB-DYNAME = 'SAPMV50A'.MESSTAB-DYNUMB = '4004'.

MESSTAB-MSGTYP = 'E'. MESSTAB-MSGSPRA = 'E'.MESSTAB-MSGID = 'VL'.

MESSTAB-MSGNR = '302'. MESSTAB-MSGV1 = ITAB-VBELN. MESSTAB-MSGV2 = ''.

MESSTAB-MSGV3 = ''. MESSTAB-ENV = 'CTU'. MESSTAB-FLDNAME = 'LIKP-VBELN'.

APPEND MESSTAB.

ELSE.

PERFORM BDC_DYNPRO USING 'SAPMV50A' '4004'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LIKP-VBELN'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.

PERFORM BDC_FIELD USING 'LIKP-VBELN' ITAB-VBELN.

PERFORM BDC_DYNPRO USING 'SAPMV50A' '1000'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=HTRA_T'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LIPS-MATNR(02)'.

PERFORM BDC_DYNPRO USING 'SAPMV50A' '2000'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=SICH_T'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LIKP-BOLNR'.

PERFORM BDC_FIELD USING 'LIKP-BOLNR' ITAB-BOLNR.

CALL TRANSACTION 'VL02N' USING BDCDATA MODE 'A' MESSAGES INTO MESSTAB.

REFRESH BDCDATA.

ENDIF.

***

IF ITAB-BELNR <> ' '.

SELECT SINGLE * FROM BKPF WHERE BELNR = ITAB-BELNR

AND GJAHR = ITAB-GJAHR.

IF SY-SUBRC = 0.

MESSTAB-TCODE = 'FB02'.MESSTAB-DYNAME = 'SAPMF05L'.MESSTAB-DYNUMB = '0100'.

MESSTAB-MSGTYP = 'E'. MESSTAB-MSGSPRA = 'E'.MESSTAB-MSGID = 'F5'.

MESSTAB-MSGNR = '238'. MESSTAB-MSGV1 = ITAB-BELNR. MESSTAB-MSGV2 = '1000'.

MESSTAB-MSGV3 = ITAB-GJAHR. MESSTAB-ENV = 'CTU'. MESSTAB-FLDNAME = 'RF05L-BELNR'.

APPEND MESSTAB.

ELSE.

PERFORM BDC_DYNPRO USING 'SAPMF05L' '0100'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'RF05L-BELNR'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.

PERFORM BDC_FIELD USING 'RF05L-BELNR' ITAB-BELNR.

PERFORM BDC_FIELD USING 'RF05L-BUKRS' '1000'.

PERFORM BDC_FIELD USING 'RF05L-GJAHR' ITAB-GJAHR.

PERFORM BDC_DYNPRO USING 'SAPMF05L' '0700'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'RF05L-ANZDT(01)'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=PK'.

PERFORM BDC_DYNPRO USING 'SAPMF05L' '0301'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'BSEG-ZFBDT'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=AE'.

PERFORM BDC_FIELD USING 'BSEG-ZFBDT' ITAB-ZFBDT.

CALL TRANSACTION 'FB02' USING BDCDATA MODE 'A' MESSAGES INTO MESSTAB.

***

REFRESH BDCDATA.

ENDIF.

ENDIF.

ENDIF.

ENDLOOP.

DATA: SPOOLID TYPE TSP01-RQIDENT. " Spool ID no.

NEW-PAGE PRINT ON

DESTINATION 'LOCL'

IMMEDIATELY ''

NO DIALOG.

LOOP AT MESSTAB WHERE MSGTYP EQ 'E'.

SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA

AND ARBGB = MESSTAB-MSGID

AND MSGNR = MESSTAB-MSGNR.

IF SY-SUBRC = 0.

L_MSTRING = T100-TEXT.

IF L_MSTRING CS '&1'.

REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING.

REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING.

REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING.

REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING.

ELSE.

REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING.

REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING.

REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING.

REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING.

ENDIF.

CONDENSE L_MSTRING.

WRITE: / MESSTAB-MSGTYP, L_MSTRING(250).

ELSE.

WRITE: / MESSTAB.

ENDIF.

IF MESSTAB-TCODE EQ 'FB02'.

DELETE ITAB WHERE BELNR = MESSTAB-MSGV1.

ENDIF.

ENDLOOP.

LOOP AT ITAB WHERE BELNR <> ' '.

SELTAB-SIGN = 'I'.

SELTAB-OPTION = 'EQ'.

SELTAB-LOW = ITAB-BELNR.

APPEND SELTAB.

ENDLOOP.

DESCRIBE TABLE SELTAB LINES SY-TABIX.

IF SY-TABIX IS INITIAL.

WRITE 'NO DATA EXIST for output(VF31)'.

ELSE.

SEL_RG_KSCHL-LOW = 'ZD00'.

APPEND SEL_RG_KSCHL.

SUBMIT SD70AV3A

WITH RG_VBELN IN SELTAB

WITH RG_KSCHL IN SEL_RG_KSCHL

WITH PM_VERMO EQ '2'

AND RETURN.

ENDIF.

----

Start new screen *

----

FORM BDC_DYNPRO USING PROGRAM DYNPRO.

CLEAR BDCDATA.

BDCDATA-PROGRAM = PROGRAM.

BDCDATA-DYNPRO = DYNPRO.

BDCDATA-DYNBEGIN = 'X'.

APPEND BDCDATA.

ENDFORM. "BDC_DYNPRO

----

Insert field *

----

FORM BDC_FIELD USING FNAM FVAL.

CLEAR BDCDATA.

BDCDATA-FNAM = FNAM.

BDCDATA-FVAL = FVAL.

APPEND BDCDATA.

ENDFORM. "BDC_FIELD

**********************************************

In the bold statement, Invoice_Date is not coming...

i try lot but not success..

Plz Tell...

Re: Data not coming in Select Statement

Former Member — Tue, 22 Apr 2008 10:56:20 GMT

Hi,

Change the data declaration statement and check out.


DATA: INVOICE_DATE TYPE VBRK-FKDAT .

<REMOVED BY MODERATOR>

Edited by: Alvaro Tejada Galindo on Apr 22, 2008 3:59 PM

Re: Data not coming in Select Statement

Former Member — Tue, 22 Apr 2008 11:38:16 GMT

Hi,

Data not coming..

Any other idea...

Re: Data not coming in Select Statement

Former Member — Tue, 22 Apr 2008 12:34:49 GMT

Hello Prince-

I have some questions regarding your query.

1)You are passing invoice_date in FM:'FIMA_DAYS_AND_MONTHS_AND_YEARS' as import parametr but it is neither select-option nor parametr and even a variable filled with data.whats the point in passing null value to the FM:'FIMA_DAYS_AND_MONTHS_AND_YEARS' .

2)check v_days and itab-vbeln = vbeln in debug mode if the two condition satisfies you select statement get trigger.Check sy-subrc aswell.

can you clarify the above points.

Cheers,

~Srini......

Re: Data not coming in Select Statement

Former Member — Tue, 22 Apr 2008 20:50:37 GMT

In your code ITAB doesnot have hearder line. so keep the header line option and then use it in the select.

Thanks,

Srinivas

Re: Data not coming in Select Statement

Former Member — Tue, 22 Apr 2008 20:57:43 GMT

Hello Prince ,

Your coding is :

SELECT SINGLE FKDAT INTO INVOICE_DATE FROM VBRK WHERE VBELN = ITAB-VBELN.

change the coding like this and try:

SELECT SINGLE FKDAT FROM VBRK INTO INVOICE_DATE WHERE VBELN = ITAB-VBELN.

Thanks,

Greetson

Re: Data not coming in Select Statement

Former Member — Wed, 23 Apr 2008 02:55:05 GMT

Hi Dear,

I have already done it also..but data not coming in invoice date..

Any other idea....

Re: Data not coming in Select Statement

Former Member — Wed, 23 Apr 2008 03:06:44 GMT

Hi,

Did you check, whether the value of itab-vbeln is comimng in debugg mode.?

Some times may be wrong value in itab.

check it.

Re: Data not coming in Select Statement

ak_upadhyay — Wed, 23 Apr 2008 03:13:21 GMT

Hi Prince,

Go to debugging mode and check.

Regards

Re: Data not coming in Select Statement

Former Member — Wed, 23 Apr 2008 03:56:24 GMT

Hi Dear,

Thanks for reply...

In ITAB-VBELN values are coming correct..

there is no problem when i debugging it..there invoice_date is not coming, it showing 00000000 value...

Plz Tell..

Re: Data not coming in Select Statement

Former Member — Wed, 23 Apr 2008 04:14:20 GMT

Prince,

Keep the select statement after LOOP ..

LOOP AT ITAB.

SELECT SINGLE FKDAT INTO INVOICE_DATE FROM VBRK WHERE VBELN = ITAB-VBELN.

CONCATENATE '00' ITAB-VBELN INTO ITAB-VBELN.

SELECT SINGLE * FROM LIKP WHERE VBELN = ITAB-VBELN.

Now check...