topic Re: Data not Update in Application Development and Automation Discussions

Data not Update

Former Member — Thu, 24 Apr 2008 09:13:13 GMT

Hi,

Plz tell me, what's problem in this program..why data is not going to updated...

**************************

REPORT ZSD06_TEST1

NO STANDARD PAGE HEADING LINE-SIZE 255 MESSAGE-ID ZBDC.

TABLES : T100,

BKPF,

LIKP,

NASE.

DATA: L_MSTRING(480).

RANGES SELTAB FOR VBRK-VBELN.

RANGES SEL_RG_KSCHL FOR NASE-KSCHL.

RANGES RG_VBELN FOR VBRK-VBELN.

RANGES RG_KSCHL FOR NASE-KSCHL.

DATA: PM_VERMO LIKE NASE-VERMO.

DATA: BEGIN OF BDCDATA OCCURS 0.

INCLUDE STRUCTURE BDCDATA.

DATA: END OF BDCDATA.

DATA: BEGIN OF ITAB OCCURS 0,

VBELN LIKE LIKP-VBELN,

BOLNR LIKE LIKP-BOLNR,

BELNR LIKE RF05L-BELNR,

GJAHR LIKE RF05L-GJAHR,

ZFBDT(10) TYPE C,

END OF ITAB.

***********************************************************

DATA: INVOICE_DATE TYPE VBRK-FKDAT.

DATA : DATE(10) TYPE C. "BLDAT.

***********************************************************

DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

DATA LD_ANSWER.

CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'

EXPORTING

DEFAULTOPTION = 'N'

TEXTLINE1 = 'BDC to enter LR.NO & DATE in delivery,accounting doc.'

TEXTLINE2 = 'Do you want to continue ?'

TITEL = SY-TITLE

START_COLUMN = 25
START_ROW = 6

CANCEL_DISPLAY = ' '

IMPORTING

ANSWER = LD_ANSWER

EXCEPTIONS

OTHERS = 0.

IF LD_ANSWER NE 'J'.

MESSAGE S001.

LEAVE PROGRAM.

ENDIF.

CALL FUNCTION 'GUI_UPLOAD'

EXPORTING

FILENAME = 'C:\LRDETAIL.txt'

FILETYPE = 'ASC'

HAS_FIELD_SEPARATOR = 'X'

HEADER_LENGTH = 0

READ_BY_LINE = 'X'

DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =

TABLES

DATA_TAB = ITAB

EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17

IF SY-SUBRC <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

LOOP AT ITAB.

CONCATENATE '00' ITAB-VBELN INTO ITAB-VBELN.

SELECT SINGLE * FROM LIKP WHERE VBELN = ITAB-VBELN.

IF SY-SUBRC <> 0.

MESSTAB-TCODE = 'VL02N'.MESSTAB-DYNAME = 'SAPMV50A'.MESSTAB-DYNUMB = '4004'.

MESSTAB-MSGTYP = 'E'. MESSTAB-MSGSPRA = 'E'.MESSTAB-MSGID = 'VL'.

MESSTAB-MSGNR = '302'. MESSTAB-MSGV1 = ITAB-VBELN. MESSTAB-MSGV2 = ''.

MESSTAB-MSGV3 = ''. MESSTAB-ENV = 'CTU'. MESSTAB-FLDNAME = 'LIKP-VBELN'.

APPEND MESSTAB.

ELSE.

PERFORM BDC_DYNPRO USING 'SAPMV50A' '4004'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LIKP-VBELN'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.

PERFORM BDC_FIELD USING 'LIKP-VBELN' ITAB-VBELN.

PERFORM BDC_DYNPRO USING 'SAPMV50A' '1000'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=HTRA_T'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LIPS-MATNR(02)'.

PERFORM BDC_DYNPRO USING 'SAPMV50A' '2000'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=SICH_T'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'LIKP-BOLNR'.

PERFORM BDC_FIELD USING 'LIKP-BOLNR' ITAB-BOLNR.

CALL TRANSACTION 'VL02N' USING BDCDATA MODE 'E' UPDATE 'S' MESSAGES INTO MESSTAB.

REFRESH BDCDATA.

ENDIF.

***

IF ITAB-BELNR <> ' '.

**********************************************************************************************************

SELECT SINGLE FKDAT FROM VBRK INTO INVOICE_DATE WHERE VBELN = ITAB-BELNR.

CALL FUNCTION 'CONVERSION_EXIT_PDATE_INPUT'

EXPORTING

INPUT = ITAB-ZFBDT

IMPORTING

OUTPUT = DATE.

**********************************************************************************************************

IF DATE LT INVOICE_DATE.

MESSAGE 'invalid data' TYPE 'S'.

ELSE.

SELECT SINGLE * FROM BKPF WHERE BELNR = ITAB-BELNR

AND GJAHR = ITAB-GJAHR.

IF SY-SUBRC = 0.

MESSTAB-TCODE = 'FB02'.MESSTAB-DYNAME = 'SAPMF05L'.MESSTAB-DYNUMB = '0100'.

MESSTAB-MSGTYP = 'E'. MESSTAB-MSGSPRA = 'E'.MESSTAB-MSGID = 'F5'.

MESSTAB-MSGNR = '238'. MESSTAB-MSGV1 = ITAB-BELNR. MESSTAB-MSGV2 = '1000'.

MESSTAB-MSGV3 = ITAB-GJAHR. MESSTAB-ENV = 'CTU'. MESSTAB-FLDNAME = 'RF05L-BELNR'.

APPEND MESSTAB.

ELSE.

PERFORM BDC_DYNPRO USING 'SAPMF05L' '0100'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'RF05L-BELNR'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.

PERFORM BDC_FIELD USING 'RF05L-BELNR' ITAB-BELNR.

PERFORM BDC_FIELD USING 'RF05L-BUKRS' '1000'.

PERFORM BDC_FIELD USING 'RF05L-GJAHR' ITAB-GJAHR.

PERFORM BDC_DYNPRO USING 'SAPMF05L' '0700'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'RF05L-ANZDT(01)'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=PK'.

PERFORM BDC_DYNPRO USING 'SAPMF05L' '0301'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'BSEG-ZFBDT'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=AE'.

PERFORM BDC_FIELD USING 'BSEG-ZFBDT' ITAB-ZFBDT.

CALL TRANSACTION 'FB02' USING BDCDATA MODE 'E' UPDATE 'S' MESSAGES INTO MESSTAB.

***

REFRESH BDCDATA.

ENDIF.

ENDLOOP.

DATA: SPOOLID TYPE TSP01-RQIDENT. " Spool ID no.

NEW-PAGE PRINT ON

DESTINATION 'LOCL'

IMMEDIATELY ''

NO DIALOG.

LOOP AT MESSTAB WHERE MSGTYP EQ 'E'.

SELECT SINGLE * FROM T100 WHERE SPRSL = MESSTAB-MSGSPRA

AND ARBGB = MESSTAB-MSGID

AND MSGNR = MESSTAB-MSGNR.

IF SY-SUBRC = 0.

L_MSTRING = T100-TEXT.

IF L_MSTRING CS '&1'.

REPLACE '&1' WITH MESSTAB-MSGV1 INTO L_MSTRING.

REPLACE '&2' WITH MESSTAB-MSGV2 INTO L_MSTRING.

REPLACE '&3' WITH MESSTAB-MSGV3 INTO L_MSTRING.

REPLACE '&4' WITH MESSTAB-MSGV4 INTO L_MSTRING.

ELSE.

REPLACE '&' WITH MESSTAB-MSGV1 INTO L_MSTRING.

REPLACE '&' WITH MESSTAB-MSGV2 INTO L_MSTRING.

REPLACE '&' WITH MESSTAB-MSGV3 INTO L_MSTRING.

REPLACE '&' WITH MESSTAB-MSGV4 INTO L_MSTRING.

ENDIF.

CONDENSE L_MSTRING.

WRITE: / MESSTAB-MSGTYP, L_MSTRING(250).

ELSE.

WRITE: / MESSTAB.

ENDIF.

IF MESSTAB-TCODE EQ 'FB02'.

DELETE ITAB WHERE BELNR = MESSTAB-MSGV1.

ENDIF.

ENDLOOP.

LOOP AT ITAB WHERE BELNR <> ' '.

SELTAB-SIGN = 'I'.

SELTAB-OPTION = 'EQ'.

SELTAB-LOW = ITAB-BELNR.

APPEND SELTAB.

ENDLOOP.

DESCRIBE TABLE SELTAB LINES SY-TABIX.

IF SY-TABIX IS INITIAL.

WRITE 'NO DATA EXIST for output(VF31)'.

ELSE.

SEL_RG_KSCHL-LOW = 'ZD00'.

APPEND SEL_RG_KSCHL.

SUBMIT SD70AV3A

WITH RG_VBELN IN SELTAB

WITH RG_KSCHL IN SEL_RG_KSCHL

WITH PM_VERMO EQ '2'

AND RETURN.

ENDIF.

----

Start new screen *

----

FORM BDC_DYNPRO USING PROGRAM DYNPRO.

CLEAR BDCDATA.

BDCDATA-PROGRAM = PROGRAM.

BDCDATA-DYNPRO = DYNPRO.

BDCDATA-DYNBEGIN = 'X'.

APPEND BDCDATA.

ENDFORM. "BDC_DYNPRO

----

Insert field *

----

FORM BDC_FIELD USING FNAM FVAL.

CLEAR BDCDATA.

BDCDATA-FNAM = FNAM.

BDCDATA-FVAL = FVAL.

APPEND BDCDATA.

ENDFORM. "BDC_FIELD

**************************************************************************************************************************************************

Plz help...URGENT...

Thanks...

Re: Data not Update

Former Member — Thu, 24 Apr 2008 09:22:37 GMT

Hi,

you only call "call transaction ..... with .... " if you select is not find somethink

SELECT SINGLE * FROM BKPF WHERE BELNR = ITAB-BELNR

AND GJAHR = ITAB-GJAHR.

if sy-subrc eq 0.

else.

...

call transaction....

regards

Nicole

Re: Data not Update

Former Member — Thu, 24 Apr 2008 09:34:45 GMT

Hi Prince Kumar,

As you told data is not updating r you fetching the flat file data in to internal table...have you checked that...

regards

Re: Data not Update

Former Member — Thu, 24 Apr 2008 09:41:05 GMT

Hi Dear,

i m not fetching the flat file data in to internal table..

from this BDC program, i m updating data into my own created transaction..

But there data is not updating..

Here date come same as invoice date into LR date.....

This is my problem..

Thanks

Re: Data not Update

Former Member — Thu, 24 Apr 2008 09:47:05 GMT

Hi,

Did you use CALL TRANSACTION 'FB02' USING BDCDATA MODE 'A' to check if the data was filled to that field correctly?

Regards

Pole

Re: Data not Update

Former Member — Thu, 24 Apr 2008 09:54:40 GMT

Hi,

You are passing data from a flat file 'C:\LRDETAIL.txt' into the internal table ITAB.

Please check whether the table ITAB is empty or not and tell.

. i.e

IF not itab[] is intial.

loop at itab ..............

endloop.

endif.

Reward points if helpful.

Thanks and Regards.

Re: Data not Update

Former Member — Thu, 24 Apr 2008 09:56:34 GMT

Hi,

I want to clear this is part....

In my Program, cursor not going in the else condition...

for ex..

************************************

IF DATE LT INVOICE_DATE.

MESSAGE 'invalid data' TYPE 'S'.

ELSE.

SELECT SINGLE * FROM BKPF WHERE BELNR = ITAB-BELNR

AND GJAHR = ITAB-GJAHR.

IF SY-SUBRC = 0.

MESSTAB-TCODE = 'FB02'.MESSTAB-DYNAME = 'SAPMF05L'.MESSTAB-DYNUMB = '0100'.

MESSTAB-MSGTYP = 'E'. MESSTAB-MSGSPRA = 'E'.MESSTAB-MSGID = 'F5'.

MESSTAB-MSGNR = '238'. MESSTAB-MSGV1 = ITAB-BELNR. MESSTAB-MSGV2 = '1000'.

MESSTAB-MSGV3 = ITAB-GJAHR. MESSTAB-ENV = 'CTU'. MESSTAB-FLDNAME = 'RF05L-BELNR'.

APPEND MESSTAB.

ELSE.

PERFORM BDC_DYNPRO USING 'SAPMF05L' '0100'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'RF05L-BELNR'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '/00'.

PERFORM BDC_FIELD USING 'RF05L-BELNR' ITAB-BELNR.

PERFORM BDC_FIELD USING 'RF05L-BUKRS' '1000'.

PERFORM BDC_FIELD USING 'RF05L-GJAHR' ITAB-GJAHR.

PERFORM BDC_DYNPRO USING 'SAPMF05L' '0700'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'RF05L-ANZDT(01)'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=PK'.

PERFORM BDC_DYNPRO USING 'SAPMF05L' '0301'.

PERFORM BDC_FIELD USING 'BDC_CURSOR' 'BSEG-ZFBDT'.

PERFORM BDC_FIELD USING 'BDC_OKCODE' '=AE'.

PERFORM BDC_FIELD USING 'BSEG-ZFBDT' ITAB-ZFBDT.

CALL TRANSACTION 'FB02' USING BDCDATA MODE 'E' UPDATE 'S' MESSAGES INTO MESSTAB.

*****************************************************************

When i used LT for it...it should be given invalid data message...but not giving...

another thing is that, when i used GT for it...it goes into else condition, but not gooing...

It goes in the BOLD code part only for both the condition...

Also i checked in A Mode, but it's not going on that screen, becuase not going in else condition...

Pls tell me, what is the error...

Thanks..

Re: Data not Update

Former Member — Thu, 24 Apr 2008 10:25:39 GMT

Hi All,

My Problem is not yet solved...

Re: Data not Update

Former Member — Thu, 24 Apr 2008 10:30:21 GMT

Hi,

that is what I tried to explain you.

Your if-condition can not be right, cause you need to call the transaction if you want to get an map.

So.....try to call the transaction in both possibilities. Else and not else.