topic Re: Reg:IDOCS in Application Development and Automation Discussions

Reg:IDOCS

Former Member — Tue, 01 Apr 2008 06:46:01 GMT

Have declared a internal table edids have to check the status of idoc in status 51 and 63 then according to that have to perform some tasks.How to code to check the status of IDOC?

Re: Reg:IDOCS

abapdeveloper20 — Tue, 01 Apr 2008 06:49:10 GMT

Use this Tcodes.

WE09 / WE02 IDoc lists according to content.

WE05 View IDocs

Reward if helpful

~_Lakshmiraj~

Re: Reg:IDOCS

abapdeveloper20 — Tue, 01 Apr 2008 06:52:35 GMT

Hi Hema,

Also the whole list of IDOC status is below

Status Description

00 Not used, only R/2

01 IDoc created

02 Error passing data to port

03 Data passed to port OK

04 Error within control information of EDI subsystem

05 Error during translation

06 Translation OK

07 Error during syntax check

08 Syntax check OK

09 Error during interchange handling

10 Interchange handling OK

11 Error during dispatch

12 Dispatch OK

13 Retransmission OK

14 Interchange Acknowledgement positive

15 Interchange Acknowledgement negative

16 Functional Acknowledgement positive

17 Functional Acknowledgement negative

18 Triggering EDI subsystem OK

19 Data transfer for test OK

20 Error triggering EDI subsystem

21 Error passing data for test

22 Dispatch OK, acknowledgement still due

23 Error during retransmission

24 Control information of EDI subsystem OK

25 Processing despite syntax error (outbound)

26 Error during syntax check of IDoc (outbound)

27 Error in dispatch level (ALE service)

28 Not used

29 Error in ALE service

30 IDoc ready for dispatch (ALE service)

31 Error - no further processing

32 IDoc was edited

33 Original of an IDoc which was edited

34 Error in control record of IDoc

35 IDoc reloaded from archive

36 Electronic signature not performed (timeout)

37 IDoc added incorrectly

38 IDoc archived

39 IDoc is in the receiving system (ALE service)

40 Application document not created in receiving system

41 Application document created in receiving system

42 IDoc was created by test transaction

50 IDoc added

51 Error: Application document not posted

52 Application document not fully posted

53 Application document posted

54 Error during formal application check

55 Formal application check OK

56 IDoc with errors added

57 Test IDoc: Error during application check

58 IDoc-Copy from an R/2 connection

59 Not used

60 Error during syntax check of IDoc (inbound)

61 Processing despite syntax error (inbound)

62 IDoc passed to application

63 Error passing IDoc to application

64 IDoc ready to be transferred to application

65 Error in ALE service

66 IDoc is waiting for predecessor IDoc (serialization)

67 Not used

68 Error - no further processing

69 IDoc was edited

70 Original of an IDoc which was edited

71 IDoc reloaded from archive

72 Not used, only R/2

73 IDoc archived

74 IDoc was created by test transaction

Reward if helpful

~_Lakshmiraj~

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 06:56:24 GMT

Hope it will help you.

Reward if help.

IDOC STATUS:

WE05 T CODE gives the status

Subject: Re: how to know the idocs which are under process

Message: Tcode: WE02

outbound

if the status is 26,29,30 ..idoc is in waiting status

03,12,38 successfully transferres

2,4,5,25 processing error

inbound

53 successfully updated

64 waiting

This is list you will get containing the various status and Idoc could be

00 Not used, only R/2

01 IDoc created

02 Error passing data to port

03 Data passed to port OK

04 Error within control information of EDI subsystem

05 Error during translation

06 Translation OK

07 Error during syntax check

08 Syntax check OK

09 Error during interchange handling

10 Interchange handling OK

11 Error during dispatch

12 Dispatch OK

13 Retransmission OK

14 Interchange Acknowledgement positive

15 Interchange Acknowledgement negative

16 Functional Acknowledgement positive

17 Functional Acknowledgement negative

18 Triggering EDI subsystem OK

19 Data transfer for test OK

20 Error triggering EDI subsystem

21 Error passing data for test

22 Dispatch OK, acknowledgement still due

23 Error during retransmission

24 Control information of EDI subsystem OK

25 Processing despite syntax error (outbound)

26 Error during syntax check of IDoc (outbound)

27 Error in dispatch level (ALE service)

28 Not used

29 Error in ALE service

30 IDoc ready for dispatch (ALE service)

31 Error - no further processing

32 IDoc was edited

33 Original of an IDoc which was edited

34 Error in control record of IDoc

35 IDoc reloaded from archive

36 Electronic signature not performed (timeout)

37 IDoc added incorrectly

38 IDoc archived

39 IDoc is in the receiving system (ALE service)

40 Application document not created in receiving system

41 Application document created in receiving system

42 IDoc was created by test transaction

50 IDoc added

51 Error: Application document not posted

52 Application document not fully posted

53 Application document posted

54 Error during formal application check

55 Formal application check OK

56 IDoc with errors added

57 Test IDoc: Error during application check

58 IDoc-Copy from an R/2 connection

59 Not used

60 Error during syntax check of IDoc (inbound)

61 Processing despite syntax error (inbound)

62 IDoc passed to application

63 Error passing IDoc to application

64 IDoc ready to be transferred to application

65 Error in ALE service

66 IDoc is waiting for predecessor IDoc (serialization)

67 Not used

68 Error - no further processing

69 IDoc was edited

70 Original of an IDoc which was edited

71 IDoc reloaded from archive

72 Not used, only R/2

73 IDoc archived

74 IDoc was created by test transaction

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 06:56:30 GMT

How should i code for this?

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 07:05:23 GMT

Hi hema,

U can read the control record and compare the Segment Name,

If it is fine then,

U can read the internal table of type EDIDS with index,

which will give u the status of the iDoc.

Now u implement if else according whether it is 51 or 63.

Thanx,

Navin

Re: Reg:IDOCS

abapdeveloper20 — Tue, 01 Apr 2008 07:07:55 GMT

Hi Hema,

Can u explain me ur actual requirment??? Whether idoc is created ????

As per my undestanding pls find the solution below

	READING AN IDOC

CALL FUNCTION 'IDOC_READ_COMPLETELY'
     EXPORTING
          document_number         = p_docnum
     IMPORTING
          idoc_control            = s_ordchg_edidc
     TABLES
          int_edidd               = itab_ordchg_edidd
     EXCEPTIONS
          document_not_exist      = 1
          document_number_invalid = 2
          OTHERS                  = 3.


Eample – Open document for read
    CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_READ'
         EXPORTING
              DOCUMENT_NUMBER         = iedidc-docnum
         IMPORTING
              IDOC_CONTROL            = IEDIDC
         EXCEPTIONS
              DOCUMENT_FOREIGN_LOCK   = 01
              DOCUMENT_NOT_EXIST      = 02
              DOCUMENT_NUMBER_INVALID = 03
              ERROR_MESSAGE           = 04
              OTHERS                  = 05.

    call function 'EDI_SEGMENTS_GET_ALL'
        exporting
         document_number         = iedidc-docnum
        tables
         idoc_containers         = data_rec
        exceptions
         document_number_invalid = 1
         end_of_document         = 2
         others                  = 3.

    if not sy-subrc is initial.
      CALL FUNCTION 'EDI_DOCUMENT_CLOSE_READ'
          EXPORTING
            DOCUMENT_NUMBER         =  iedidc-docnum
          IMPORTING
            IDOC_CONTROL            =  iedidc

Try to loop that IEDIDC to check its STATUS

The Best way to say thanks in SDN is by rewarding points for helpful answers

Rgds~ Lakshmiraj

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 07:11:49 GMT

Hi sorry am new to ABAP so can u explain me better way.

I should give as read table itab(internal table name) with index r8.what does the index specifies.

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 07:17:22 GMT

HI Hema,

This should help...

Consider

Idoc message type is :

constants:

l_c_msgtyp TYPE edimsg-mestyp VALUE '/GLB/RGTKNKK'.

TYPE:

l_wa_edidc TYPE edidc, " Idoc_Control

l_wa_edids type edids-status.

Check:

READ TABLE idoc_contrl INTO l_wa_edidc INDEX 1.

IF idoc_contrl-mestyp = l_c_msgtyp.

Now since IDoc_status is a internal table with header line.

Read table idoc_status[] index 1.

l_wa_edids = idoc_status-status.

l_wa_edids holds the value i.e 51 or 63.

Here u will get the latest status of idoc which u see in T-Code WE05.

Here u can find the status whether it is 51 or 63 and code accordingly.

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 07:19:15 GMT

The idocs are generated for a particular range of date.now i have to display a report.

1)In that first have to fetch the idocs of status 51 or 68.

2)Then have to link this idoc to the particular vendor

3)The segment related to the vendor is E1EDKA1LF and the field is PARTN and get the details such as invoice number,date etc and display in a report.

Can u get me?I dont know how to code in this part?

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 07:23:25 GMT

I have already got the status of the idocs using FM idoc_Read_completely now have to only filter the idocs of status 51 0r 68

Re: Reg:IDOCS

arunkumar_yerram — Tue, 01 Apr 2008 07:25:15 GMT

Hema,

In the case of outbound, when you call the function module 'MASTER_IDOC_DISTRIBUTE', there is a parameter 'COMMUNICATION_IDOC_CONTROL' which is of type EDIDC.

After calling the above function module, the generated IDoc details can be read from the Communication IDoc Control internal table.

Use the following code:

Read table index 1 gt_comm_idoc into gw_comm_idoc.

You can then check the status of the generated IDoc using the field gw_comm_idoc-status. Based on this you can include your logic.

Hope this helps.

Arun

Re: Reg:IDOCS

arunkumar_yerram — Tue, 01 Apr 2008 07:29:56 GMT

Understood that your requirement is in inbound.

When you call the FM 'IDOC_READ_COMPLETELY', there is an Import parameter IDOC_CONTROL.

Use the case statement like this to achieve your functionality.

CASE IDOC_CONTROL-STATUS.

WHEN '51' OR '67'.

......add your logic here.

...... perform f_do_this.

WHEN OTHERS.

......

Hope this helps.

Regards,

Arun

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 07:30:05 GMT

i have to make use of idoc_read_completely in my requirement so have used it and got the status of the idocs within particular range of date.now i have to filter the idocs of status 51 0r 68 alone and have to link to the segment inorder to relate to the vendor and get the details of the vendor

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 07:32:51 GMT

For performance issue it would be better if i use read statement .how to use it?

Re: Reg:IDOCS

abapdeveloper20 — Tue, 01 Apr 2008 07:34:11 GMT

Hi Hema,

Pls check this program . It is closely related to IDOC status checking , meanwhile I'l try to work on your requirement...

***********************************************
*Change IDoc status to error status and send to workflow
REPORT ZS7BM000007 MESSAGE-ID ZS7 .
*______________________________________________________________________

*/ Program Name: Process invoice IDocs with Goods Receipt
*/ Description : This program checks all INVOIC MM IDocs in status 64
*                and 66 to determine if they have been received. Those
*                IDocs older than 10 days that have still not been
*                goods receipted are given error status 51.
*/ Transaction : N/A - run via scheduled job
*______________________________________________________________________

TABLES: EDIDC,
        MKPF,
        EKPO,
        RBKP,
        E1EDK01,
        E1EDKA1,
        E1EDK02,
        E1EDP02.

DATA: IEDIDC   LIKE EDIDC OCCURS 1 WITH HEADER LINE,
      DATA_REC LIKE EDIDD OCCURS 1 WITH HEADER LINE.

DATA: C_DOCNUM(16) TYPE C,
      C_MBLNR(10)  TYPE C,
      C_INVOIC(10) TYPE C,
      RC(1)        TYPE C,
      LEAD_TIME    LIKE LFM1-PLIFZ,
      GR_QTY       LIKE MSEG-ERFMG,
      TEST_DATE    LIKE SY-DATUM,
      GR_REQUIRED  LIKE EKPO-WEBRE,
      PO_NUMBER(10)    TYPE N,
      PO_LINENO    LIKE EKPO-EBELP,
      N_VEND(10)   TYPE N,
      VENDOR_ID    LIKE LFA1-LIFNR.

DATA: BEGIN OF ITAB_GR OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        BWART LIKE MSEG-BWART,
        ERFMG LIKE MSEG-ERFMG,
      END OF ITAB_GR.

CONSTANTS:
* name of container element (workitem object id)
  C_ELEMENT_WI_OBJ_ID      LIKE SWCONT-ELEMENT VALUE '_WI_OBJECT_ID',
* name of container element (NumberPlusEventcode)
  C_ELEMENT_NO_PLUS_INFO   LIKE SWCONT-ELEMENT
                           VALUE 'NumberPlusEventcode'.

RANGES: R_STATUS FOR EDIDC-STATUS.

TYPE-POOLS:
* general idoc type pool
  TIDOC.

************************************************************************
* INCLUDES                                                             *
************************************************************************
* include for workflow programming
INCLUDE <CNTN01>.

************************************************************************
* INNITIALIZATION                                                      *
************************************************************************
INITIALIZATION.
* create IDoc status selection table.
  CLEAR R_STATUS. REFRESH R_STATUS.

  MOVE: 'EQ'      TO R_STATUS-OPTION,   "equals
        'I'       TO R_STATUS-SIGN,     "include
        '64'      TO R_STATUS-LOW.
  APPEND R_STATUS.
  MOVE: '66'      TO R_STATUS-LOW.
  APPEND R_STATUS.

************************************************************************
* START-OF-SELECTION
************************************************************************
START-OF-SELECTION.

  SELECT * FROM EDIDC INTO TABLE IEDIDC
    WHERE STATUS IN R_STATUS AND
          DIRECT = '2' AND      "inbound
          MESTYP = 'INVOIC' AND
          MESCOD = 'MM'.

  LOOP AT IEDIDC.
    CLEAR RC.

    CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_READ'
         EXPORTING
              DOCUMENT_NUMBER         = IEDIDC-DOCNUM
         IMPORTING
              IDOC_CONTROL            = IEDIDC
         EXCEPTIONS
              DOCUMENT_FOREIGN_LOCK   = 01
              DOCUMENT_NOT_EXIST      = 02
              DOCUMENT_NUMBER_INVALID = 03
              ERROR_MESSAGE           = 04
              OTHERS                  = 05.

    IF NOT SY-SUBRC IS INITIAL.
      C_DOCNUM = IEDIDC-DOCNUM.
      SHIFT C_DOCNUM LEFT DELETING LEADING '0'.
* 'Cannot open INVOIC IDoc & for Goods Receipt processing'
      MESSAGE W025 WITH C_DOCNUM.
      CONTINUE.
    ENDIF.

    CALL FUNCTION 'EDI_SEGMENTS_GET_ALL'
        EXPORTING
         DOCUMENT_NUMBER         = IEDIDC-DOCNUM
        TABLES
         IDOC_CONTAINERS         = DATA_REC
        EXCEPTIONS
         DOCUMENT_NUMBER_INVALID = 1
         END_OF_DOCUMENT         = 2
         OTHERS                  = 3.

    IF NOT SY-SUBRC IS INITIAL.
      CALL FUNCTION 'EDI_DOCUMENT_CLOSE_READ'
          EXPORTING
            DOCUMENT_NUMBER         =  IEDIDC-DOCNUM
          IMPORTING
            IDOC_CONTROL            =  IEDIDC

      C_DOCNUM = IEDIDC-DOCNUM.
      SHIFT C_DOCNUM LEFT DELETING LEADING '0'.
* 'Cannot retrieve data for INVOIC IDoc & (Goods Receipt processing)'
      MESSAGE W030 WITH C_DOCNUM.
      CONTINUE.
    ELSE.
      CALL FUNCTION 'EDI_DOCUMENT_CLOSE_READ'
          EXPORTING
            DOCUMENT_NUMBER         =  IEDIDC-DOCNUM
          IMPORTING
            IDOC_CONTROL            =  IEDIDC.
* If this is a change or modify IDoc, change status to 51 (error).
* One & only one K01 segment should exist -
      READ TABLE DATA_REC WITH KEY SEGNAM = 'E1EDK01'.
      IF SY-SUBRC IS INITIAL.
        MOVE DATA_REC-SDATA TO E1EDK01.
        CASE E1EDK01-ACTION.
          WHEN '000'.  "original data
* OK - do nothing
          WHEN '002'.  "modified data
* 'Invoice & - IDoc for Review Only'
            PERFORM IDOC_STATUS_UPDATE USING '51' '028'
                                             'Modification' ' '.
          WHEN '002'.  "modified data
* 'Invoice & - IDoc for Review Only'
            PERFORM IDOC_STATUS_UPDATE USING '51' '028'
                                             'Cancellation' ' '.
        ENDCASE.
      ENDIF.
      CHECK RC IS INITIAL.
* get the vendor no.
      CLEAR VENDOR_ID.
      LOOP AT DATA_REC WHERE SEGNAM = 'E1EDKA1'.
        MOVE DATA_REC-SDATA TO E1EDKA1.
        CHECK: E1EDKA1-PARVW = 'LF',
               E1EDKA1-PARTN CO ' 0123456789',
               E1EDKA1-PARTN <> ' '.
        N_VEND = E1EDKA1-PARTN.
        VENDOR_ID = N_VEND.
      ENDLOOP.
* if this is a new IDoc, check to make sure it even needs the GR test
      CLEAR GR_REQUIRED.
      LOOP AT DATA_REC WHERE SEGNAM = 'E1EDP02'.
        MOVE DATA_REC-SDATA TO E1EDP02.
        CHECK: E1EDP02-QUALF = '001',
               E1EDP02-BELNR <> ' ',
               E1EDP02-ZEILE <> ' '.
* Note that a missing PO number / line number is NOT an error here -
* the IDoc will error in the standard SAP processing in RBDAPP01
        SHIFT E1EDP02-BELNR LEFT DELETING LEADING '0'.
        CLEAR: PO_NUMBER, PO_LINENO.
        IF E1EDP02-BELNR CO ' 0123456789'.
          PO_NUMBER = E1EDP02-BELNR.
        ENDIF.
        IF E1EDP02-ZEILE CO ' 0123456789'.
          PO_LINENO = E1EDP02-ZEILE.
        ENDIF.
        SELECT SINGLE WEBRE FROM EKPO INTO GR_REQUIRED
            WHERE EBELN = PO_NUMBER
              AND EBELP = PO_LINENO.
        IF ( SY-SUBRC IS INITIAL AND GR_REQUIRED = 'X' ).
          EXIT.
        ENDIF.
      ENDLOOP.  "E1EDP02 segments
* if any line item on this invoice requires a goods receipt, continue
* receipt evaluation. Otherwise, status the IDoc to go to standard SAP
* processing. (Assumption is made that if an IDoc has status 66, the GR
* flag was turned "on" at some point and has since been removed.)
      IF GR_REQUIRED IS INITIAL.  "no goods receipt required
        IF IEDIDC-STATUS = '66'.
* 'Goods Receipt no longer required'
          PERFORM IDOC_STATUS_UPDATE USING '64' '026' ' ' ' '.
        ENDIF.
        CONTINUE. "next IDoc
      ENDIF.

* Should be only one K02, but loop just in case...
      LOOP AT DATA_REC WHERE SEGNAM = 'E1EDK02'.
        MOVE DATA_REC-SDATA TO E1EDK02.
        IF E1EDK02-QUALF = '009'.
* if an invoice already exists for this ref. no., give the IDoc
* an error status
          SELECT SINGLE BELNR FROM RBKP INTO RBKP-BELNR
            WHERE XBLNR = E1EDK02-BELNR(16)
              AND BLART = 'KR' "invoice
              AND STBLG = ' '. "no reversal
          IF SY-SUBRC IS INITIAL.
*'Invoice & already exists for ref.no. &'
            C_INVOIC = RBKP-BELNR.
            SHIFT C_INVOIC LEFT DELETING LEADING '0'.
            PERFORM IDOC_STATUS_UPDATE USING '51' '027'
                             C_INVOIC E1EDK02-BELNR(16).
            EXIT. "exit loop on data recs for this IDoc
          ENDIF.
          CLEAR: ITAB_GR, GR_QTY.
          REFRESH: ITAB_GR.
          SELECT A~MBLNR
                 B~BWART B~ERFMG
            INTO CORRESPONDING FIELDS OF TABLE ITAB_GR
              FROM MKPF AS A
                 INNER JOIN MSEG AS B
                    ON A~MBLNR = B~MBLNR
              WHERE A~VGART = 'WE' "goods receipt for PO
                AND A~BLART = 'WE' "goods receipt
                AND A~XBLNR = E1EDK02-BELNR(16).
          LOOP AT ITAB_GR.
            CASE ITAB_GR-BWART.
              WHEN '101'. "receipt
                GR_QTY = GR_QTY + ITAB_GR-ERFMG.
              WHEN '102'. "reversal
                GR_QTY = GR_QTY - ITAB_GR-ERFMG.
            ENDCASE.
          ENDLOOP.
* if no goods receipt
          IF GR_QTY <= 0.
           CASE IEDIDC-STATUS.
* if new IDoc, status to '66'
             WHEN '64'.
* 'Waiting for Goods Receipt'
               PERFORM IDOC_STATUS_UPDATE USING '66' '022' ' ' ' '.
* if reprocessed IDoc, check length of delay and status to 51
* (late receipt) if > 10 days.
             WHEN '66'.
               CLEAR LEAD_TIME.
               SELECT SINGLE PLIFZ FROM LFM1 INTO LEAD_TIME
                   WHERE LIFNR = VENDOR_ID
                     AND EKORG = '7100'.
               IF LEAD_TIME IS INITIAL.
                 LEAD_TIME = 10.
               ENDIF.
               TEST_DATE = IEDIDC-CREDAT + LEAD_TIME.
**TEST
**               if test_date > sy-datum.
**TEST
               IF TEST_DATE <= SY-DATUM.

* 'Goods Receipt Overdue'
                 PERFORM IDOC_STATUS_UPDATE USING '51' '024' ' ' ' '.
               ELSE.
* do nothing - IDoc stays in status 66 and gets tested for GR in next
* job run
               ENDIF.
            ENDCASE.
          ELSE. "goods receipt exists
* if this is a reprocess of an IDoc for which a goods receipt now
* exists, give the IDoc status 64, so it is processed by RBDAPP01
* in the next job step.
            IF IEDIDC-STATUS = '66'.
              C_MBLNR = MKPF-MBLNR.
              SHIFT C_MBLNR LEFT DELETING LEADING '0'.
* 'Goods Receipt found for ref.no. &'
              PERFORM IDOC_STATUS_UPDATE
                            USING '64' '023' E1EDK02-BELNR(16) ' '.
            ENDIF.
          ENDIF.
        ELSE.  "wrong K02 qualifier
* do nothing - IDoc will try to post and be handled manually
        ENDIF.  "QUALF='009'
      ENDLOOP.  "data_rec
    ENDIF.  "successful retrieval of IDoc data segments > data_rec

  ENDLOOP.  "iedidc

END-OF-SELECTION.

*-----------------------------------------------------------------------
*  FORM IDOC_STATUS_UPDATE
*  Creates status records for the selected IDocs.
*-----------------------------------------------------------------------
FORM IDOC_STATUS_UPDATE USING VALUE(I_STAT)
                              VALUE(I_MSGNO)
                              VALUE(I_MSGV1)
                              VALUE(I_MSGV2).
TABLES: EDI_DS, TEDE2.

DATA: MESS LIKE EDIMESSAGE.

DATA:
    L_COMMIT_COUNTER        LIKE EDIGLODATA-COMCOUNT VALUE '00000001',
    INBSYNC                 LIKE EDIGLODATA-INBSYNC,
    T_COUPLE_TO_PROCESS     LIKE EDIINBOUND OCCURS 0 WITH HEADER LINE.

  CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_PROCESS'
         EXPORTING
              DOCUMENT_NUMBER         = IEDIDC-DOCNUM
         IMPORTING
              IDOC_CONTROL            = IEDIDC
         EXCEPTIONS
              DOCUMENT_FOREIGN_LOCK   = 01
              DOCUMENT_NOT_EXIST      = 02
              DOCUMENT_NUMBER_INVALID = 03
              ERROR_MESSAGE           = 04
              OTHERS                  = 05.

  IF NOT SY-SUBRC IS INITIAL.
      C_DOCNUM = IEDIDC-DOCNUM.
      SHIFT C_DOCNUM LEFT DELETING LEADING '0'.
* 'Cannot open INVOIC IDoc & for Goods Receipt processing'
      MESSAGE W025 WITH C_DOCNUM.
      RC = 'X'.
      EXIT.
  ENDIF.

  CLEAR EDI_DS.
  EDI_DS-DOCNUM      = IEDIDC-DOCNUM.
  EDI_DS-STATUS      = I_STAT.
  EDI_DS-REPID       = 'ZS7BM000007'.
  EDI_DS-TABNAM      = 'EDI_DS'.
  EDI_DS-MANDT       = SY-MANDT.
  EDI_DS-STAMQU      = 'SAP'.
  EDI_DS-STAMID      = 'ZS7'.
  EDI_DS-STAMNO      = I_MSGNO.
  EDI_DS-STAPA1      = I_MSGV1.
  EDI_DS-STAPA2      = I_MSGV2.
  GET TIME.
  EDI_DS-LOGDAT      = SY-DATUM.
  EDI_DS-LOGTIM      = SY-UZEIT.

  CALL FUNCTION 'EDI_DOCUMENT_STATUS_SET'
    EXPORTING
      DOCUMENT_NUMBER               = IEDIDC-DOCNUM
      IDOC_STATUS                   = EDI_DS
    IMPORTING
      IDOC_CONTROL                  = IEDIDC
    EXCEPTIONS
      DOCUMENT_NUMBER_INVALID       = 1
      OTHER_FIELDS_INVALID          = 2
      STATUS_INVALID                = 3
      OTHERS                        = 4
            .
  IF NOT SY-SUBRC IS INITIAL.
    C_DOCNUM = IEDIDC-DOCNUM.
    SHIFT C_DOCNUM LEFT DELETING LEADING '0'.
* IDoc no. & failed status update to &
    MESSAGE W021 WITH C_DOCNUM I_STAT.
  ENDIF.

  CALL FUNCTION 'EDI_DOCUMENT_CLOSE_PROCESS'
        EXPORTING
          DOCUMENT_NUMBER     =  IEDIDC-DOCNUM.

  IF I_STAT = '51'.

      CLEAR: T_COUPLE_TO_PROCESS.
      REFRESH: T_COUPLE_TO_PROCESS.

      SELECT SINGLE * FROM TEDE2 INTO TEDE2
         WHERE EVCODE = 'INVL'.
      IF SY-SUBRC IS INITIAL.
        T_COUPLE_TO_PROCESS(16) = IEDIDC-DOCNUM.
        T_COUPLE_TO_PROCESS+16(138) = TEDE2.
        APPEND T_COUPLE_TO_PROCESS.

        PERFORM ANALYZING_EVENT_CREATE
                TABLES
                   T_COUPLE_TO_PROCESS
                USING
                   L_COMMIT_COUNTER
                   INBSYNC.
        IF SY-SUBRC IS INITIAL.

          MESS-MSGID = 'ZS7'.
          MESS-MSGTY = 'E'.
          MESS-MSGNO = I_MSGNO.
          MESS-MSGV1 = I_MSGV1.
          MESS-MSGV2 = I_MSGV2.
          CALL FUNCTION 'IDOC_ERROR_WORKFLOW_START'
            EXPORTING
              DOCNUM                        = 0
              EVENTCODE                     = 'EDIM'
              MESS                          = MESS
              STATUSMESS                    = MESS
            EXCEPTIONS
              NO_ENTRY_IN_TEDE5             = 1
              ERROR_IN_START_WORKFLOW       = 2
              OTHERS                        = 3.

          COMMIT WORK.
        ENDIF.  "link created
      ENDIF.  "tede2 found

  ENDIF.

* Set return code to stop further processing of this IDoc
  RC = 'X'.

ENDFORM.


*-----------------------------------------------------------------------
*  FORM ANALYZING_EVENT_CREATE
*  Creates link between IDoc and workflow container.
*  SAP code stolen from LEDINF01
*-----------------------------------------------------------------------
FORM ANALYZING_EVENT_CREATE
                TABLES
                   T_COUPLE_TO_PROCESS_IN  STRUCTURE EDIINBOUND
                USING
                   COMMIT_COUNTER_IN       LIKE      EDIGLODATA-COMCOUNT
                   START_RECFB_SYNCHRON_IN LIKE      EDIGLODATA-INBSYNC.
* local variables
  DATA:
* instance that is created
    L_OBJECT               TYPE SWC_OBJECT,
* object key, e.g IDoc number
    L_OBJECT_KEY           LIKE SWOTOBJID-OBJKEY,
* id of wf event
    L_EVENT_ID             LIKE SWEDUMEVID-EVTID,
* status record for case of error
    L_STATUS_RECORD        TYPE TIDOC_STATUS_RECORD_EXT,
* flag indicating whether subscribed task is started synchronously
    L_START_RECFB_SYNCHRON LIKE SWEFLAGS-SYNCFLAG VALUE ' ',
* idoc number (needed because of type checking)
    L_IDOC_NUMBER          LIKE EDIDC-DOCNUM.
* local constants
  CONSTANTS:
* object type 'IDOC'
    C_OBJECT_TYPE          LIKE SWETYPECOU-OBJTYPE VALUE 'IDOCINVOIC',
* name of event to be created
    C_IDC_EVT     LIKE SWETYPECOU-EVENT VALUE 'INPUTERROROCCURREDMM'
.

 IF T_COUPLE_TO_PROCESS_IN[] IS INITIAL.
    COMMIT WORK.
    CALL FUNCTION 'DEQUEUE_ALL'.
    CLEAR COMMIT_COUNTER_IN.
    EXIT.
  ENDIF.

* cast
  L_START_RECFB_SYNCHRON = START_RECFB_SYNCHRON_IN.
* declaration of container
  SWC_CONTAINER       L_T_EV_CONTAINER.
* initialize container
  SWC_CLEAR_CONTAINER L_T_EV_CONTAINER.

* dequeue all idocs at the same time
  LOOP AT T_COUPLE_TO_PROCESS_IN.
* cast
    L_IDOC_NUMBER = T_COUPLE_TO_PROCESS_IN(16).
    CALL FUNCTION 'EDI_DOCUMENT_DEQUEUE_LATER'
         EXPORTING
              DOCNUM = L_IDOC_NUMBER
         EXCEPTIONS
              OTHERS = 0.
  ENDLOOP.

* get first idoc number in table in order to create an object
  READ TABLE T_COUPLE_TO_PROCESS_IN INDEX 1.
* set object key in variable of correct type (casting)
  L_OBJECT_KEY = T_COUPLE_TO_PROCESS_IN(16).

* create an object, i.e. an IDoc
  SWC_CREATE_OBJECT L_OBJECT C_OBJECT_TYPE L_OBJECT_KEY.

* fill container: work item object id (idoc)
  SWC_SET_ELEMENT L_T_EV_CONTAINER     "EC *
                  C_ELEMENT_WI_OBJ_ID  "EC *
                  L_OBJECT.            "EC *
* fill container:  NumberPlusEventcode (table of couples)
  SWC_SET_TABLE L_T_EV_CONTAINER
                C_ELEMENT_NO_PLUS_INFO
                T_COUPLE_TO_PROCESS_IN.

* fire event that will trigger the idoc inbound processing
  CALL FUNCTION 'SWE_EVENT_CREATE'
       EXPORTING
            OBJTYPE              = C_OBJECT_TYPE
            OBJKEY               = L_OBJECT_KEY
            EVENT                = C_IDC_EVT
*           CREATOR              = ' '
*           START_WITH_DELAY     = ' '
            START_RECFB_SYNCHRON = L_START_RECFB_SYNCHRON
       IMPORTING
            EVENT_ID             = L_EVENT_ID
       TABLES
            EVENT_CONTAINER      = L_T_EV_CONTAINER
       EXCEPTIONS
            OBJTYPE_NOT_FOUND    = 1
            OTHERS               = 2.

  IF   ( SY-SUBRC <> 0 )
* event was not created => error handling for this idoc (EDIM)
    OR ( L_EVENT_ID = 0 ).
* stop processing, no commit
    MESSAGE ID      'E0'
            TYPE    'A'
            NUMBER  '374'
            WITH    L_STATUS_RECORD-DOCNUM
                    C_IDC_EVT
            RAISING EVENT_CREATE_FAILED.
  ELSE.
* do commit and reset counter
* the commit will get the idocs to the database and at the same time
* activate the event that was created
    COMMIT WORK.
* dequeue all unprocessed IDocs to avoid log-overflow
    CALL FUNCTION 'DEQUEUE_ALL'.
    CLEAR COMMIT_COUNTER_IN.
* reset table of idocs that need to be processed
    CLEAR   T_COUPLE_TO_PROCESS_IN.
    REFRESH T_COUPLE_TO_PROCESS_IN.
  ENDIF.

ENDFORM.                               " ANALYZING_EVENT_CREATE

Reward if useful

Lakshmiraj

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 07:44:59 GMT

Hi,Really your answer would be helpful.Think u can understand my requirement.In my report The output needs to show:

Vendor

Inbound iDoc Number

iDoc Date

iDoc Status: 51 or 68

PO Number

Invoice Number

Invoice date

Invoice Amount

Error Message: For multiple errors on a single iDoc, multiple records should be shown.

Re: Reg:IDOCS

arunkumar_yerram — Tue, 01 Apr 2008 08:18:09 GMT

Hema,

Usage of CASE is preferred to READ, when considering performance issues.

Anyway, usage of the Read Statement is given below.

READ TABLE IDOC_CONTROL WITH KEY STATUS = 57 OR 68.

Re: Reg:IDOCS

Former Member — Tue, 01 Apr 2008 09:25:32 GMT

Hi if i give that syntax it is showing the syntax error as "= ..." expected after "OR".how to code using if.for both the status same action only should be performed

Re: Reg:IDOCS

Former Member — Wed, 02 Apr 2008 07:08:36 GMT

Hi for fetching the vendor details i used ur code.I get a error in line E1EDKA1-PARTN ' '. as Unable to interpret "' '". Possible causes of error: Incorrect spellingor comma error.whats the error?