Re: standard BDC program

Former Member — Tue, 04 Mar 2008 08:39:09 GMT

Check these threads..U can find sample program.

here with i am sending code in two ways using session method

i have selected 2 views

1.basic data 1

2.basic data 2

flat file structure.

ukmatrl58 ea matrlno58

ukmatrl59 ea matrlno59

codes:

1. by using include RSBDCX1

2.without using include rsbdcx1.

report ZGEMS123

no standard page heading line-size 255.

include zbdcrecx147.

data : c_file type string.

data : begin of itab occurs 0,

matnr(18),

meins(3),

maktx(40),

end of itab.

SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.

PARAMETERS : P_FILE TYPE RLGRAP-FILENAME.

SELECTION-SCREEN END OF BLOCK B1.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.

CALL FUNCTION 'F4_FILENAME'

EXPORTING

PROGRAM_NAME = SYST-CPROG

DYNPRO_NUMBER = SYST-DYNNR

FIELD_NAME = ' '

IMPORTING

FILE_NAME = P_FILE

start-of-selection.

move p_file to c_file.

CALL FUNCTION 'GUI_UPLOAD'

EXPORTING

FILENAME = c_file

FILETYPE = 'ASC'

HAS_FIELD_SEPARATOR = 'X'

HEADER_LENGTH = 0

READ_BY_LINE = 'X'

DAT_MODE = ' '

CODEPAGE = ' '

IGNORE_CERR = ABAP_TRUE

REPLACEMENT = '#'

CHECK_BOM = ' '

VIRUS_SCAN_PROFILE =

NO_AUTH_CHECK = ' '

IMPORTING

FILELENGTH =

HEADER =

TABLES

DATA_TAB = itab

EXCEPTIONS

FILE_OPEN_ERROR = 1

FILE_READ_ERROR = 2

NO_BATCH = 3

GUI_REFUSE_FILETRANSFER = 4

INVALID_TYPE = 5

NO_AUTHORITY = 6

UNKNOWN_ERROR = 7

BAD_DATA_FORMAT = 8

HEADER_NOT_ALLOWED = 9

SEPARATOR_NOT_ALLOWED = 10

HEADER_TOO_LONG = 11

UNKNOWN_DP_ERROR = 12

ACCESS_DENIED = 13

DP_OUT_OF_MEMORY = 14

DISK_FULL = 15

DP_TIMEOUT = 16

OTHERS = 17

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

perform open_group.

loop at itab.

perform bdc_dynpro using 'SAPLMGMM' '0060'.

perform bdc_field using 'BDC_CURSOR'

'RMMG1-MATNR'.

perform bdc_field using 'BDC_OKCODE'

'=AUSW'.

perform bdc_field using 'RMMG1-MATNR'

itab-matnr.

perform bdc_field using 'RMMG1-MBRSH'

'C'.

perform bdc_field using 'RMMG1-MTART'

'VOLL'.

perform bdc_dynpro using 'SAPLMGMM' '0070'.

perform bdc_field using 'BDC_CURSOR'

'MSICHTAUSW-DYTXT(02)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_field using 'MSICHTAUSW-KZSEL(01)'

'X'.

perform bdc_field using 'MSICHTAUSW-KZSEL(02)'

'X'.

perform bdc_dynpro using 'SAPLMGMM' '4004'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'MAKT-MAKTX'

itab-maktx.

perform bdc_field using 'BDC_CURSOR'

'T006A-MSEHT'.

perform bdc_field using 'MARA-MEINS'

itab-meins.

perform bdc_field using 'MARA-MTPOS_MARA'

'VOLL'.

perform bdc_dynpro using 'SAPLMGMM' '4004'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'BDC_CURSOR'

'MAKT-MAKTX'.

perform bdc_field using 'MAKT-MAKTX'

itab-maktx.

perform bdc_dynpro using 'SAPLSPO1' '0300'.

perform bdc_field using 'BDC_OKCODE'

'=YES'.

perform bdc_transaction using 'MM01'.

endloop.

perform close_group.

write : /'success'.

W/O USING INCLUDE

&----

*& Report ZGEMS1234

&----

REPORT ZGEMS1234 no standard page heading line-size 137.

internal table to obtain data from flat file

data : begin of itab occurs 0,

matnr(18),

meins(3),

maktx(40),

end of itab.

Bdc table

data : I_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.

data : c_file type string.

to access file name

SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.

PARAMETERS : P_FILE TYPE RLGRAP-FILENAME.

SELECTION-SCREEN END OF BLOCK B1.

to provide f4 help to file name

AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.

CALL FUNCTION 'F4_FILENAME'

EXPORTING

PROGRAM_NAME = SYST-CPROG

DYNPRO_NUMBER = SYST-DYNNR

FIELD_NAME = ' '

IMPORTING

FILE_NAME = P_FILE

start-of-selection.

move p_file to c_file.

*uploading data from flat file

CALL FUNCTION 'GUI_UPLOAD'

EXPORTING

FILENAME = c_file

FILETYPE = 'ASC'

HAS_FIELD_SEPARATOR = 'X'

HEADER_LENGTH = 0

READ_BY_LINE = 'X'

DAT_MODE = ' '

CODEPAGE = ' '

IGNORE_CERR = ABAP_TRUE

REPLACEMENT = '#'

CHECK_BOM = ' '

VIRUS_SCAN_PROFILE =

NO_AUTH_CHECK = ' '

IMPORTING

FILELENGTH =

HEADER =

TABLES

DATA_TAB = itab

EXCEPTIONS

FILE_OPEN_ERROR = 1

FILE_READ_ERROR = 2

NO_BATCH = 3

GUI_REFUSE_FILETRANSFER = 4

INVALID_TYPE = 5

NO_AUTHORITY = 6

UNKNOWN_ERROR = 7

BAD_DATA_FORMAT = 8

HEADER_NOT_ALLOWED = 9

SEPARATOR_NOT_ALLOWED = 10

HEADER_TOO_LONG = 11

UNKNOWN_DP_ERROR = 12

ACCESS_DENIED = 13

DP_OUT_OF_MEMORY = 14

DISK_FULL = 15

DP_TIMEOUT = 16

OTHERS = 17

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

perform open_group.

loop at itab.

CLEAR I_BDCDATA.

REFRESH I_BDCDATA.

perform bdc_dynpro using 'SAPLMGMM' '0060'.

perform bdc_field using 'BDC_CURSOR'

'RMMG1-MATNR'.

perform bdc_field using 'BDC_OKCODE'

'=AUSW'.

perform bdc_field using 'RMMG1-MATNR'

itab-matnr.

perform bdc_field using 'RMMG1-MBRSH'

'C'.

perform bdc_field using 'RMMG1-MTART'

'VOLL'.

perform bdc_dynpro using 'SAPLMGMM' '0070'.

perform bdc_field using 'BDC_CURSOR'

'MSICHTAUSW-DYTXT(02)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_field using 'MSICHTAUSW-KZSEL(01)'

'X'.

perform bdc_field using 'MSICHTAUSW-KZSEL(02)'

'X'.

perform bdc_dynpro using 'SAPLMGMM' '4004'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'MAKT-MAKTX'

itab-maktx.

perform bdc_field using 'BDC_CURSOR'

'T006A-MSEHT'.

perform bdc_field using 'MARA-MEINS'

itab-meins.

perform bdc_field using 'MARA-MTPOS_MARA'

'VOLL'.

perform bdc_dynpro using 'SAPLMGMM' '4004'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'BDC_CURSOR'

'MAKT-MAKTX'.

perform bdc_field using 'MAKT-MAKTX'

itab-maktx.

perform bdc_dynpro using 'SAPLSPO1' '0300'.

perform bdc_field using 'BDC_OKCODE'

'=YES'.

perform BDC_INSERT.

endloop.

perform close_group.

write : /'success'.

&----

*& Form open_group

&----

text

--> p1 text

<-- p2 text

FORM open_group .

CALL FUNCTION 'BDC_OPEN_GROUP'

EXPORTING

CLIENT = SY-MANDT

DEST = FILLER8

GROUP = 'UMAKANTH'

HOLDDATE = FILLER8

KEEP = 'X'

USER = SY-UNAME

RECORD = FILLER1

PROG = SY-CPROG

IMPORTING

QID =

EXCEPTIONS

CLIENT_INVALID = 1

DESTINATION_INVALID = 2

GROUP_INVALID = 3

GROUP_IS_LOCKED = 4

HOLDDATE_INVALID = 5

INTERNAL_ERROR = 6

QUEUE_ERROR = 7

RUNNING = 8

SYSTEM_LOCK_ERROR = 9

USER_INVALID = 10

OTHERS = 11

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. " open_group

&----

*& Form BDC_INSERT

&----

text

--> p1 text

<-- p2 text

FORM BDC_INSERT .

CALL FUNCTION 'BDC_INSERT'

EXPORTING

TCODE = 'MM01'

POST_LOCAL = NOVBLOCAL

PRINTING = NOPRINT

SIMUBATCH = ' '

CTUPARAMS = ' '

TABLES

DYNPROTAB = I_BDCDATA

EXCEPTIONS

INTERNAL_ERROR = 1

NOT_OPEN = 2

QUEUE_ERROR = 3

TCODE_INVALID = 4

PRINTING_INVALID = 5

POSTING_INVALID = 6

OTHERS = 7

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. " BDC_INSERT

&----

*& Form close_group

&----

text

--> p1 text

<-- p2 text

FORM close_group .

CALL FUNCTION 'BDC_CLOSE_GROUP'

EXCEPTIONS

NOT_OPEN = 1

QUEUE_ERROR = 2

OTHERS = 3

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. " close_group

&----

*& Form bdc_dynpro

&----

text

-->P_0169 text

-->P_0170 text

FORM bdc_dynpro USING P_PGM P_SCR.

I_BDCDATA-PROGRAM = P_PGM.

I_BDCDATA-DYNPRO = P_SCR.

I_BDCDATA-DYNBEGIN = 'X'.

APPEND I_BDCDATA.

CLEAR I_BDCDATA.

ENDFORM. " bdc_dynpro

&----

*& Form bdc_field

&----

text

-->P_0174 text

-->P_0175 text

FORM bdc_field USING P_FNAM P_FVAL.

I_BDCDATA-FNAM = P_FNAM.

I_BDCDATA-FVAL = P_FVAL.

APPEND I_BDCDATA.

CLEAR I_BDCDATA.

ENDFORM. " bdc_field

BDC for VA01

I prefer to load the Sales Orders by a BAPI thro LSMW using following object:

codeBusiness object BUS2032 Sales order

Method CREATEFROMDAT2 Sales order: Create Sales Order

Message type SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order

Basic type SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order[/code]

BDC for XD01

hope this code will help you.

ABAP BDC SAMPLE CODE XD01

Table/Structure declarations. *

TABLES : KNA1. "Customer master

Constants declarations. *

CONSTANTS : C_MODE VALUE 'A',

C_UPDATE VALUE 'S',

C_X VALUE 'X',

C_SESS TYPE APQI-GROUPID VALUE 'ZCUSTOMER', "Session Name

C_XD01 LIKE TSTC-TCODE VALUE 'XD01'.

Variable declarations. *

DATA : V_FNAME(15) VALUE SPACE, " Name of file to be created

V_FAILREC TYPE I, " No of failed records

V_MSG(255), " Message Text

V_ERRREC TYPE I, " No of failed records

V_LINES TYPE I, " No of records

V_BANKS(15), " Table column BANKS

V_BANKL(15), " Table column BANKL

V_BANKN(15), " Table column BANKN

V_TIDX(2) TYPE N. " Table row index

FLAG DECLARATIONS

DATA : FG_DATA_EXIST VALUE 'X', " Check for data

FG_SESSION_OPEN VALUE ' '. " Check for Session Open

MACRO DEFINITIONS

Macro for BANKS

DEFINE BANKS.

CLEAR V_BANKS.

CONCATENATE 'KNBK-BANKS(' &1 ')' INTO V_BANKS.

CONDENSE V_BANKS.

END-OF-DEFINITION.

Macro for BANKL

DEFINE BANKL.

CLEAR V_BANKL.

CONCATENATE 'KNBK-BANKL(' &1 ')' INTO V_BANKL.

CONDENSE V_BANKL.

END-OF-DEFINITION.

Macro for BANKN

DEFINE BANKN.

CLEAR V_BANKN.

CONCATENATE 'KNBK-BANKN(' &1 ')' INTO V_BANKN.

CONDENSE V_BANKN.

END-OF-DEFINITION.

Structures / Internal table declarations *

Structure to hold BDC data

TYPES : BEGIN OF T_BDCTABLE.

INCLUDE STRUCTURE BDCDATA.

TYPES END OF T_BDCTABLE.

Structure to trap BDC messages

TYPES : BEGIN OF T_MSG.

INCLUDE STRUCTURE BDCMSGCOLL.

TYPES : END OF T_MSG.

Structure to trap ERROR messages

TYPES : BEGIN OF T_ERR_MSG,

MESSAGE(255),

END OF T_ERR_MSG.

*--Internal table to store flat file data

DATA : BEGIN OF IT_KNA1 OCCURS 0,

KUNNR LIKE KNA1-KUNNR,

KTOKD LIKE T077D-KTOKD,

NAME1 LIKE KNA1-NAME1,

SORTL LIKE KNA1-SORTL,

ORT01 LIKE KNA1-ORT01,

PSTLZ LIKE KNA1-PSTLZ,

LAND1 LIKE KNA1-LAND1,

SPRAS LIKE KNA1-SPRAS,

LZONE LIKE KNA1-LZONE,

END OF IT_KNA1.

*--Internal table to store bank details

DATA : BEGIN OF IT_BANK OCCURS 0,

BANKS LIKE KNBK-BANKS,

BANKL LIKE KNBK-BANKL,

BANKN LIKE KNBK-BANKN,

END OF IT_BANK.

Internal table to hold BDC data

DATA: IT_BDCDATA TYPE STANDARD TABLE OF T_BDCTABLE WITH HEADER LINE,

Internal Table to store ALL messages

IT_MSG TYPE STANDARD TABLE OF T_MSG WITH HEADER LINE,

Internal Table to store error messages

IT_ERR_MSG TYPE STANDARD TABLE OF T_ERR_MSG WITH HEADER LINE.

Selection Screen. *

SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.

PARAMETERS : P_FLNAME(15) OBLIGATORY.

SELECTION-SCREEN END OF BLOCK B1.

SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.

SELECTION-SCREEN BEGIN OF LINE.

PARAMETERS : R_LIST RADIOBUTTON GROUP GRP1.

SELECTION-SCREEN COMMENT 5(20) TEXT-003.

PARAMETERS : R_SESS RADIOBUTTON GROUP GRP1.

SELECTION-SCREEN COMMENT 30(20) TEXT-004.

SELECTION-SCREEN END OF LINE.

SELECTION-SCREEN END OF BLOCK B2.

Event:Initialization *

INITIALIZATION.

AT Selection Screen. *

AT SELECTION-SCREEN.

Event: Start-of-Selection *

START-OF-SELECTION.

V_FNAME = P_FLNAME.

PERFORM GET_DATA.

PERFORM GET_BANKDATA.

PERFORM GENERATE_DATASET.

Event: End-of-Selection *

END-OF-SELECTION.

IF FG_DATA_EXIST = ' '.

MESSAGE I010 WITH TEXT-009.

EXIT.

ENDIF.

PERFORM GENERATE_BDCDATA.

PERFORM DISPLAY_ERR_RECS.

Event: top-of-page

TOP-OF-PAGE.

//////////////////////////////////////////////////////////////////////

FORM DEFINITIONS *

*//////////////////////////////////////////////////////////////////////

&----

*& Form get_data

&----

Subroutine to get the data from mard

--> p1 text

<-- p2 text

FORM GET_DATA.

CALL FUNCTION 'UPLOAD'

EXPORTING

CODEPAGE = ' '

FILENAME = 'C:\XD01.TXT'

FILETYPE = 'DAT'

ITEM = ' '

FILEMASK_MASK = ' '

FILEMASK_TEXT = ' '

FILETYPE_NO_CHANGE = ' '

FILEMASK_ALL = ' '

FILETYPE_NO_SHOW = ' '

LINE_EXIT = ' '

USER_FORM = ' '

USER_PROG = ' '

SILENT = 'S'

IMPORTING

FILESIZE =

CANCEL =

ACT_FILENAME =

ACT_FILETYPE =

TABLES

DATA_TAB = IT_KNA1

EXCEPTIONS

CONVERSION_ERROR = 1

INVALID_TABLE_WIDTH = 2

INVALID_TYPE = 3

NO_BATCH = 4

UNKNOWN_ERROR = 5

GUI_REFUSE_FILETRANSFER = 6

OTHERS = 7

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

IF IT_KNA1[] IS INITIAL.

FG_DATA_EXIST = ' '.

ENDIF.

ENDFORM. " get_data

&----

*& Form GENERATE_DATASET

&----

text

--> p1 text

<-- p2 text

FORM GENERATE_DATASET.

MESSAGE I010 WITH 'OPENING FILE IN APPLICATION SERVER'.

**--Creating a data set in application server

OPEN DATASET V_FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.

**---Transfering data from internal table to dataset

MESSAGE I010 WITH 'TRANSFERING DATA FROM INETERAL TABLE TO THE FILE'.

LOOP AT IT_KNA1.

TRANSFER IT_KNA1 TO V_FNAME.

ENDLOOP.

**--Closing the dataset

MESSAGE I010 WITH 'CLOSING THE FILE'.

CLOSE DATASET V_FNAME.

ENDFORM. " GENERATE_DATASET

&----

*& Form BDC_DYNPRO

&----

text

-->P_0467 text

-->P_0468 text

FORM BDC_DYNPRO USING PROGRAM DYNPRO.

CLEAR IT_BDCDATA.

IT_BDCDATA-PROGRAM = PROGRAM.

IT_BDCDATA-DYNPRO = DYNPRO.

IT_BDCDATA-DYNBEGIN = 'X'.

APPEND IT_BDCDATA.

ENDFORM.

&----

*& Form BDC_FIELD

&----

text

-->P_0472 text

-->P_0473 text

FORM BDC_FIELD USING FNAM FVAL.

IF NOT FVAL IS INITIAL.

CLEAR IT_BDCDATA.

IT_BDCDATA-FNAM = FNAM.

IT_BDCDATA-FVAL = FVAL.

APPEND IT_BDCDATA.

ENDIF.

ENDFORM.

&----

*& Form GENERATE_BDCDATA

&----

text

--> p1 text

<-- p2 text

FORM GENERATE_BDCDATA.

REFRESH IT_KNA1.

Opening dataset for reading

OPEN DATASET V_FNAME FOR INPUT IN TEXT MODE ENCODING DEFAULT.

Reading the file from application server

DO.

CLEAR: IT_KNA1,IT_BDCDATA.

REFRESH IT_BDCDATA.

READ DATASET V_FNAME INTO IT_KNA1.

IF SY-SUBRC <> 0.

EXIT.

ELSE.

Populate BDC Data for Initial Screen

PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0100',

BDC_FIELD USING 'BDC_CURSOR' 'RF02D-KUNNR',

BDC_FIELD USING 'BDC_OKCODE' '/00',

BDC_FIELD USING 'RF02D-KUNNR' IT_KNA1-KUNNR,

BDC_FIELD USING 'RF02D-KTOKD' IT_KNA1-KTOKD.

Populate BDC Data for Second Screen

PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0110',

BDC_FIELD USING 'BDC_CURSOR' 'KNA1-NAME1',

BDC_FIELD USING 'BDC_OKCODE' '/00',

BDC_FIELD USING 'KNA1-NAME1' IT_KNA1-NAME1,

BDC_FIELD USING 'KNA1-SORTL' IT_KNA1-SORTL,

BDC_FIELD USING 'KNA1-ORT01' IT_KNA1-ORT01,

BDC_FIELD USING 'KNA1-PSTLZ' IT_KNA1-PSTLZ,

BDC_FIELD USING 'KNA1-LAND1' IT_KNA1-LAND1,

BDC_FIELD USING 'KNA1-SPRAS' IT_KNA1-SPRAS.

Populate BDC Data for Third Screen

PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0120',

BDC_FIELD USING 'BDC_CURSOR' 'KNA1-LZONE',

BDC_FIELD USING 'BDC_OKCODE' '/00',

BDC_FIELD USING 'KNA1-LZONE' IT_KNA1-LZONE.

Populate BDC Data for Fourth Screen

PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0125',

BDC_FIELD USING 'BDC_CURSOR' 'KNA1-NIELS',

BDC_FIELD USING 'BDC_OKCODE' '/00'.

Populate BDC Data for Table control for bank details.

V_TIDX = '01'.

LOOP AT IT_BANK.

BANKS V_TIDX.

BANKL V_TIDX.

BANKN V_TIDX.

PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0130',

BDC_FIELD USING 'BDC_CURSOR' V_BANKN,

BDC_FIELD USING 'BDC_OKCODE' '=ENTR',

BDC_FIELD USING V_BANKS IT_BANK-BANKS,

BDC_FIELD USING V_BANKL IT_BANK-BANKL,

BDC_FIELD USING V_BANKN IT_BANK-BANKN.

V_TIDX = V_TIDX + 1.

ENDLOOP.

PERFORM : BDC_DYNPRO USING 'SAPMF02D' '0130',

BDC_FIELD USING 'BDC_CURSOR' V_BANKS,

BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.

CALL TRANSACTION C_XD01 USING IT_BDCDATA

MODE C_MODE

UPDATE C_UPDATE

MESSAGES INTO IT_MSG.

IF SY-SUBRC 0.

*--In case of error list display

IF R_LIST = C_X.

V_ERRREC = V_ERRREC + 1.

PERFORM FORMAT_MESSAGE.

IT_ERR_MSG-MESSAGE = V_MSG.

APPEND IT_ERR_MSG.

CLEAR : V_MSG,IT_ERR_MSG.

ENDIF.

*--In case of session log

IF R_SESS = C_X.

In case of transaction fails.

IF FG_SESSION_OPEN = ' '.

FG_SESSION_OPEN = C_X.

PERFORM BDC_OPEN_GROUP.

ENDIF. " IF FG_SESSION_OPEN = ' '.

Insert BDC Data..

PERFORM BDC_INSERT_DATA.

ENDIF. " IF R_SESS = C_X.

ENDIF. " IF SY-SUBRC 0.

ENDDO.

Closing the dataset

CLOSE DATASET V_FNAME.

Close the session if opened

IF FG_SESSION_OPEN = C_X.

PERFORM BDC_CLOSE_GROUP.

CALL TRANSACTION 'SM35'.

ENDIF.

ENDFORM. " GENERATE_BDCDATA

&----

*& Form BDC_OPEN_GROUP

&----

text

--> p1 text

<-- p2 text

FORM BDC_OPEN_GROUP.

CALL FUNCTION 'BDC_OPEN_GROUP'

EXPORTING

CLIENT = SY-MANDT

DEST = FILLER8

GROUP = C_SESS

HOLDDATE = FILLER8

KEEP = C_X

USER = SY-UNAME

RECORD = FILLER1

IMPORTING

QID =

EXCEPTIONS

CLIENT_INVALID = 1

DESTINATION_INVALID = 2

GROUP_INVALID = 3

GROUP_IS_LOCKED = 4

HOLDDATE_INVALID = 5

INTERNAL_ERROR = 6

QUEUE_ERROR = 7

RUNNING = 8

SYSTEM_LOCK_ERROR = 9

USER_INVALID = 10

OTHERS = 11

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. " BDC_OPEN_GROUP

&----

*& Form BDC_INSERT_DATA

&----

text

--> p1 text

<-- p2 text

FORM BDC_INSERT_DATA.

CALL FUNCTION 'BDC_INSERT'

EXPORTING

TCODE = C_XD01

POST_LOCAL = NOVBLOCAL

PRINTING = NOPRINT

TABLES

DYNPROTAB = IT_BDCDATA

EXCEPTIONS

INTERNAL_ERROR = 1

NOT_OPEN = 2

QUEUE_ERROR = 3

TCODE_INVALID = 4

PRINTING_INVALID = 5

POSTING_INVALID = 6

OTHERS = 7

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. " BDC_INSERT_DATA

&----

*& Form BDC_CLOSE_GROUP

&----

text

--> p1 text

<-- p2 text

FORM BDC_CLOSE_GROUP.

CALL FUNCTION 'BDC_CLOSE_GROUP'

EXCEPTIONS

NOT_OPEN = 1

QUEUE_ERROR = 2

OTHERS = 3.

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. " BDC_CLOSE_GROUP

&----

*& Form FORMAT_MESSAGE

&----

text

--> p1 text

<-- p2 text

FORM FORMAT_MESSAGE.

CLEAR V_LINES.

DESCRIBE TABLE IT_MSG LINES V_LINES.

READ TABLE IT_MSG INDEX V_LINES.

CLEAR V_MSG.

CALL FUNCTION 'FORMAT_MESSAGE'

EXPORTING

ID = IT_MSG-MSGID

LANG = IT_MSG-MSGSPRA

NO = IT_MSG-MSGNR

V1 = IT_MSG-MSGV1

V2 = IT_MSG-MSGV2

V3 = IT_MSG-MSGV3

V4 = IT_MSG-MSGV4

IMPORTING

MSG = V_MSG

EXCEPTIONS

NOT_FOUND = 1

OTHERS = 2.

IF SY-SUBRC 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO

WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. " FORMAT_MESSAGE

&----

*& Form DISPLAY_ERR_RECS

&----

text

--> p1 text

<-- p2 text

FORM DISPLAY_ERR_RECS.

LOOP AT IT_ERR_MSG.

WRITE: / IT_ERR_MSG-MESSAGE.

ENDLOOP.

ENDFORM. " DISPLAY_ERR_RECS

&----

*& Form GET_BANKDATA

&----

text

--> p1 text

<-- p2 text

FORM GET_BANKDATA.

IT_BANK-BANKS = 'AD'.

IT_BANK-BANKL = '1000'.

IT_BANK-BANKN = 'S.B A/C'.

APPEND IT_BANK.

IT_BANK-BANKS = 'AD'.

IT_BANK-BANKL = 'CITY'.

IT_BANK-BANKN = 'CURR. A/C'.

APPEND IT_BANK.

IT_BANK-BANKS = 'AD'.

IT_BANK-BANKL = 'H001'.

IT_BANK-BANKN = 'S.B A/C'.

APPEND IT_BANK.

reward if help.

topic Re: standard BDC program in Application Development and Automation Discussions

standard BDC program

Re: standard BDC program

Re: standard BDC program

Re: standard BDC program