topic Re: BDC TABLE CONTROL in Application Development and Automation Discussions

BDC TABLE CONTROL

Former Member — Fri, 25 Jan 2008 04:53:35 GMT

Hi,

any one can help me to learn BDC TABLE CONTROL with example.......what is the purpose of that ,where we use it,why should we use bdc control?plz explain with sample code?

thanks and regards,

jeniliya.

Re: BDC TABLE CONTROL

Former Member — Fri, 25 Jan 2008 04:57:53 GMT

http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm

http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac9f35c111d1829f0000e829fbfe/frameset.htm

Handling of table control in BDC check these links:

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm

http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm

http://arthur_ong.tripod.com/xab023.htm

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm

Reward if useful.

Re: BDC TABLE CONTROL

Former Member — Fri, 25 Jan 2008 04:59:34 GMT

BDC Example: Using Table Control in BDC

Among beginners, using table control in BDC is always a puzzle.

Following is a sample code of handling table control in BDC.

REPORT Y730_BDC5 .

*HANDLING TABLE CONTROL IN BDC

DATA : BEGIN OF IT_DUMMY OCCURS 0,

DUMMY(100) TYPE C,

END OF IT_DUMMY.

DATA : BEGIN OF IT_XK01 OCCURS 0,

LIFNR(10) TYPE C,

BUKRS(4) TYPE C,

EKORG(4) TYPE C,

KTOKK(4) TYPE C,

NAME1(30) TYPE C,

SORTL(10) TYPE C,

LAND1(3) TYPE C,

SPRAS(2) TYPE C,

AKONT(6) TYPE C,

FDGRV(2) TYPE C,

WAERS(3) TYPE C,

END OF IT_XK01,

BEGIN OF IT_BANK OCCURS 0,

BANKS(3) TYPE C,

BANKL(10) TYPE C,

BANKN(10) TYPE C,

KOINH(30) TYPE C,

LIFNR(10) TYPE C,

END OF IT_BANK.

DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,

IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = 'C:\VENDOR.TXT'

FILETYPE = 'ASC'

TABLES

DATA_TAB = IT_DUMMY.

LOOP AT IT_DUMMY.

IF IT_DUMMY-DUMMY+0(2) = '11'.

IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).

IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).

IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).

IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).

IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).

IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).

IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).

IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).

IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).

IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).

IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).

APPEND IT_XK01.

ELSE.

IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).

IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).

IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).

IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).

IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).

APPEND IT_BANK.

ENDIF.

ENDLOOP.

LOOP AT IT_XK01.

REFRESH IT_BDCDATA.

perform bdc_dynpro using 'SAPMF02K' '0100'.

perform bdc_field using 'BDC_CURSOR'

'RF02K-REF_LIFNR'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'RF02K-LIFNR'

IT_XK01-LIFNR.

perform bdc_field using 'RF02K-BUKRS'

IT_XK01-BUKRS.

perform bdc_field using 'RF02K-EKORG'

IT_XK01-EKORG.

perform bdc_field using 'RF02K-KTOKK'

IT_XK01-KTOKK.

perform bdc_dynpro using 'SAPMF02K' '0110'.

perform bdc_field using 'BDC_CURSOR'

'LFA1-TELX1'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFA1-NAME1'

IT_XK01-NAME1.

perform bdc_field using 'LFA1-SORTL'

IT_XK01-SORTL.

perform bdc_field using 'LFA1-LAND1'

IT_XK01-LAND1.

perform bdc_field using 'LFA1-SPRAS'

IT_XK01-SPRAS.

perform bdc_dynpro using 'SAPMF02K' '0120'.

perform bdc_field using 'BDC_CURSOR'

'LFA1-KUNNR'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0130'.

perform bdc_field using 'BDC_CURSOR'

'LFBK-KOINH(02)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

DATA : FNAM(20) TYPE C,

IDX TYPE C.

MOVE 1 TO IDX.

LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.

CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKS.

CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKL.

CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKN.

CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-KOINH.

IDX = IDX + 1.

ENDLOOP.

perform bdc_dynpro using 'SAPMF02K' '0130'.

perform bdc_field using 'BDC_CURSOR'

'LFBK-BANKS(01)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_dynpro using 'SAPMF02K' '0210'.

perform bdc_field using 'BDC_CURSOR'

'LFB1-FDGRV'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFB1-AKONT'

IT_XK01-AKONT.

perform bdc_field using 'LFB1-FDGRV'

IT_XK01-FDGRV.

perform bdc_dynpro using 'SAPMF02K' '0215'.

perform bdc_field using 'BDC_CURSOR'

'LFB1-ZTERM'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0220'.

perform bdc_field using 'BDC_CURSOR'

'LFB5-MAHNA'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0310'.

perform bdc_field using 'BDC_CURSOR'

'LFM1-WAERS'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFM1-WAERS'

IT_XK01-WAERS.

perform bdc_dynpro using 'SAPMF02K' '0320'.

perform bdc_field using 'BDC_CURSOR'

'WYT3-PARVW(01)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_dynpro using 'SAPLSPO1' '0300'.

perform bdc_field using 'BDC_OKCODE'

'=YES'.

CALL TRANSACTION 'XK01' USING IT_BDCDATA

MODE 'A'

UPDATE 'S'

MESSAGES INTO IT_BDCMSGCOLL.

ENDLOOP.

FORM BDC_DYNPRO USING PROG SCR.

CLEAR IT_BDCDATA.

IT_BDCDATA-PROGRAM = PROG.

IT_BDCDATA-DYNPRO = SCR.

IT_BDCDATA-DYNBEGIN = 'X'.

APPEND IT_BDCDATA.

ENDFORM.

FORM BDC_FIELD USING FNAM FVAL.

CLEAR IT_BDCDATA.

IT_BDCDATA-FNAM = FNAM.

IT_BDCDATA-FVAL = FVAL.

APPEND IT_BDCDATA.

ENDFORM.

Hope that would clear the matters for freshers.

Refer the link:

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm

The concept is easy: it has to indicate the index of the table control in the field name, so if you have to populate the first record of table control:

BDC-FIELDNAME = <FIELDNAME>(01).

If you fill the second row:

BDC-FIELDNAME = <FIELDNAME>(02).

and so....

Now the problem is usually on how many records you have to load, because u can fill only the rows of table control available in the screen, If you have more records than it can be displayed yuo have to simulate the command to go next page.

The number of recod can be displayed can depend on pc resolution and many program haven't command to go to next page (in this case it could be impossible create a BDC program9.

A way to create a bdc program resolution indipendent is to work on the first and second row.

Place the first hit in the first row of bdc;

Place the second insert in the second row of bdc;

Place the last hit to the top of table control;

Place the next hit in the second row;

Place the last hit to the top of table control;

Place the next hit in the second row;

Reward if useful

Re: BDC TABLE CONTROL

Former Member — Fri, 25 Jan 2008 05:00:43 GMT

the sample code for bdc table control just execute this once u will come to know the purpose of table control

DATA: BEGIN OF it_xk01 OCCURS 0,

f1(1),

f2(5),

f3(5),

f4(9),

f5(9),

END OF it_xk01.

DATA: v_count(2) VALUE '00',

v_koinh(14),

v_banks(14),

v_bankn(14),

v_bankl(14),

it_bdcdata TYPE STANDARD TABLE OF bdcdata WITH HEADER LINE,

wa_ctuparams type ctu_params.

PARAMETERS: p_file TYPE rlgrap-filename OBLIGATORY.

AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.

PERFORM get_f4.

START-OF-SELECTION.

PERFORM upload_data.

END-OF-SELECTION.

LOOP AT it_xk01.

IF it_xk01-f1 = 'H'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.

PERFORM bdc_field USING 'BDC_CURSOR'

'RF02K-KTOKK'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'RF02K-KTOKK'

it_xk01-f2.

ENDIF.

IF it_xk01-f1 = 'N'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFA1-PSTLZ'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=VW'.

PERFORM bdc_field USING 'LFA1-ANRED'

'Mr'.

PERFORM bdc_field USING 'LFA1-NAME1'

it_xk01-f2.

PERFORM bdc_field USING 'LFA1-SORTL'

it_xk01-f3.

PERFORM bdc_field USING 'LFA1-PSTLZ'

it_xk01-f4.

PERFORM bdc_field USING 'LFA1-LAND1'

it_xk01-f5.

PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFA1-KUNNR'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=VW'.

ENDIF.

IF it_xk01-f1 = 'I'.

v_count = v_count + 1.

IF v_count le 5.

CONCATENATE 'LFBK-KOINH(' v_count ')' INTO v_koinh.

CONCATENATE 'LFBK-BANKS(' v_count ')' INTO v_banks.

CONCATENATE 'LFBK-BANKN(' v_count ')' INTO v_bankn.

CONCATENATE 'LFBK-BANKL(' v_count ')' INTO v_bankl.

CONDENSE v_koinh NO-GAPS.

CONDENSE v_banks NO-GAPS.

CONDENSE v_bankl NO-GAPS.

CONDENSE v_bankn NO-GAPS.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

v_koinh.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING v_banks

it_xk01-f2.

PERFORM bdc_field USING v_bankl

it_xk01-f3.

PERFORM bdc_field USING v_bankn

it_xk01-f4.

PERFORM bdc_field USING v_koinh

it_xk01-f5.

else.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

v_koinh.

PERFORM bdc_field USING 'BDC_OKCODE'

'=P+'.

v_count = 1.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

v_koinh.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

CONCATENATE 'LFBK-KOINH(' v_count ')' INTO v_koinh.

CONCATENATE 'LFBK-BANKS(' v_count ')' INTO v_banks.

CONCATENATE 'LFBK-BANKN(' v_count ')' INTO v_bankn.

CONCATENATE 'LFBK-BANKL(' v_count ')' INTO v_bankl.

CONDENSE v_koinh NO-GAPS.

CONDENSE v_banks NO-GAPS.

CONDENSE v_bankl NO-GAPS.

CONDENSE v_bankn NO-GAPS.

PERFORM bdc_field USING v_banks

it_xk01-f2.

PERFORM bdc_field USING v_bankl

it_xk01-f3.

PERFORM bdc_field USING v_bankn

it_xk01-f4.

PERFORM bdc_field USING v_koinh

it_xk01-f5.

ENDIF.

CLEAR it_xk01.

ENDLOOP.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

v_koinh.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPLSPO1' '0300'.

perform bdc_field using 'BDC_OKCODE'

'=YES'.

wa_ctuparams-DISMODE = 'A'.

wa_ctuparams-UPDMODE = 'S'.

wa_ctuparams-DEFSIZE = 'X'.

CALL TRANSACTION 'XK01' USING it_bdcdata MODE 'A'

UPDATE 'S'.

options from wa_ctuparams.
MODE 'A'
UPDATE 'S'.

&----

*& Form upload_data

&----

text

----

FORM upload_data .

DATA: lv_infile TYPE string.

lv_infile = p_file.

CALL FUNCTION 'GUI_UPLOAD'

EXPORTING

filename = lv_infile

filetype = 'ASC'

has_field_separator = 'X'

TABLES

data_tab = it_xk01.

IF sy-subrc <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

ENDFORM. " upload_data

&----

*& Form get_f4

&----

text

----

FORM get_f4 .

CALL FUNCTION 'F4_FILENAME'

EXPORTING

program_name = syst-cprog

dynpro_number = syst-dynnr

FIELD_NAME = ' '

IMPORTING

file_name = p_file.

ENDFORM. " get_f4

----

Start new screen *

----

FORM bdc_dynpro USING program dynpro.

CLEAR it_bdcdata.

it_bdcdata-program = program.

it_bdcdata-dynpro = dynpro.

it_bdcdata-dynbegin = 'X'.

APPEND it_bdcdata.

ENDFORM. "BDC_DYNPRO

----

Insert field *

----

FORM bdc_field USING fnam fval.

IF FVAL <> NODATA.

CLEAR it_bdcdata.

it_bdcdata-fnam = fnam.

it_bdcdata-fval = fval.

APPEND it_bdcdata.

ENDIF.

ENDFORM. "BDC_FIELD

************flat file:

*H 0302

*N Sahana Raj 500020 IN

*I IN ICICI 734897597 sam

*I IN SBH 768346687 sekhar

*I IN SBI 345687346 satish

*I IN SBH 763846878 Phani

*I IN HSBC 797893778 Prakash

*I IN HDFC 723678638 Rajsekhar

*I IN 4444 435645646 Shiva

*I IN 3400 763468768 Ramana

the transaction is XK01.

Re: BDC TABLE CONTROL

Former Member — Fri, 25 Jan 2008 05:00:53 GMT

Hope it will help you.

reward if help.

Check the below link.

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm

THis is example to upload the Bank details of the Vendor which has the TC.

REPORT zprataptable2

NO STANDARD PAGE HEADING LINE-SIZE 255.

DATA : BEGIN OF itab OCCURS 0,

i1 TYPE i,

lifnr LIKE rf02k-lifnr,

bukrs LIKE rf02k-bukrs,

ekorg LIKE rf02k-ekorg,

ktokk LIKE rf02k-ktokk,

anred LIKE lfa1-anred,

name1 LIKE lfa1-name1,

sortl LIKE lfa1-sortl,

land1 LIKE lfa1-land1,

akont LIKE lfb1-akont,

fdgrv LIKE lfb1-fdgrv,

waers LIKE lfm1-waers,

END OF itab.

DATA : BEGIN OF jtab OCCURS 0,

j1 TYPE i,

banks LIKE lfbk-banks,

bankl LIKE lfbk-bankl,

bankn LIKE lfbk-bankn,

END OF jtab.

DATA : cnt(4) TYPE n.

DATA : fdt(20) TYPE c.

DATA : c TYPE i.

INCLUDE bdcrecx1.

START-OF-SELECTION.

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

filename = 'C:\first1.txt'

filetype = 'DAT'

TABLES

data_tab = itab.

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

filename = 'C:\second.txt'

filetype = 'DAT'

TABLES

data_tab = jtab.

LOOP AT itab.

PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.

PERFORM bdc_field USING 'BDC_CURSOR'

'RF02K-KTOKK'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'RF02K-LIFNR'

itab-lifnr.

PERFORM bdc_field USING 'RF02K-BUKRS'

itab-bukrs.

PERFORM bdc_field USING 'RF02K-EKORG'

itab-ekorg.

PERFORM bdc_field USING 'RF02K-KTOKK'

itab-ktokk.

PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFA1-LAND1'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'LFA1-ANRED'

itab-anred.

PERFORM bdc_field USING 'LFA1-NAME1'

itab-name1.

PERFORM bdc_field USING 'LFA1-SORTL'

itab-sortl.

PERFORM bdc_field USING 'LFA1-LAND1'

itab-land1.

PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFA1-KUNNR'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFBK-BANKN(01)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

cnt = 0.

LOOP AT jtab WHERE j1 = itab-i1.

cnt = cnt + 1.

CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.

PERFORM bdc_field USING fdt jtab-banks.

CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.

PERFORM bdc_field USING fdt jtab-bankl.

CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.

PERFORM bdc_field USING fdt jtab-bankn.

IF cnt = 5.

cnt = 0.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFBK-BANKS(01)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=P+'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFBK-BANKN(02)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

ENDIF.

ENDLOOP.

PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFBK-BANKS(01)'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFB1-FDGRV'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'LFB1-AKONT'

itab-akont.

PERFORM bdc_field USING 'LFB1-FDGRV'

itab-fdgrv.

PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFB1-ZTERM'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFB5-MAHNA'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.

PERFORM bdc_field USING 'BDC_CURSOR'

'LFM1-WAERS'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'LFM1-WAERS'

itab-waers.

PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.

PERFORM bdc_field USING 'BDC_CURSOR'

'RF02K-LIFNR'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTR'.

PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=YES'.

PERFORM bdc_transaction USING 'XK01'.

ENDLOOP.

PERFORM close_group.

Header file:

1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr

2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr

TC file:

1 in sb 11000

1 in sb 12000

1 in sb 13000

1 in sb 14000

1 in sb 15000

1 in sb 16000

1 in sb 17000

1 in sb 18000

1 in sb 19000

1 in sb 20000

1 in sb 21000

1 in sb 22000

2 in sb 21000

2 in sb 22000

**********************************************

REPORT zmm_pr_upload_mat

NO STANDARD PAGE HEADING

LINE-SIZE 255.

Standard Include for Selection Screen

INCLUDE bdcrecx1.

Internal Table for Upload Data

DATA: BEGIN OF i_pr OCCURS 0,

Header Screen

sno(3), " SNo

bsart(004), " PR Type

epstp(001), " Item Category

knttp(001), " Account Assignment

eeind(010), " Delivery Date

lpein(001), " Category of Del Date

werks(004), " Plant

lgort(004), " Storage Location

ekgrp(003), " Purchasing Group

matkl(009), " Material Group

bednr(010), " Tracking No

afnam(012), " Requisitioner

Item Details

matnr(018), " Material No

menge(017), " Quantity

badat(010),
frgdt(010),

preis(014), " Valuation Price

waers(005), " Currency
peinh(005),
wepos(001),
repos(001),

sakto(010), " GL Account

kostl(010), " Cost Center

bnfpo(005),

END OF i_pr.

Internal Table for header Data

DATA: BEGIN OF it_header OCCURS 0,

sno(3), " SNo

bsart(004), " PR Type

epstp(001), " Item Category

knttp(001), " Account Assignment

eeind(010), " Delivery Date

werks(004), " Plant

lgort(004), " Storage Location

ekgrp(003), " Purchasing Group

matkl(009), " Material Group

bednr(010), " Tracking No

afnam(012), " Requisitioner

END OF it_header.

Internal Table for Item Data

DATA: BEGIN OF it_item OCCURS 0,

sno(3), " SNo

matnr(018), " Material No

menge(017), " Quantity

preis(014), " Valuation Price

sakto(010), " GL Account

kostl(010), " Cost Center

END OF it_item.

Data Variables & Constants

CONSTANTS : c_x VALUE 'X'. " Flag

DATA : v_l(2), " Counter

v_rowno(5), " Row No

v_2(2), " Counter

v_rows LIKE sy-srows, " Rows in TC

v_field(45). " String

Parameters

PARAMETERS: p_file LIKE ibipparms-path. " Filename

At selection-screen on Value Request for file Name

AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.

Get the F4 Values for the File

CALL FUNCTION 'F4_FILENAME'

EXPORTING

program_name = syst-cprog

dynpro_number = syst-dynnr

IMPORTING

file_name = p_file.

Start of Selection

START-OF-SELECTION.

Open the BDC Session

PERFORM open_group.

Upload the File into internal Table

CALL FUNCTION 'UPLOAD'

EXPORTING

filename = p_file

filetype = 'DAT'

TABLES

data_tab = i_pr

EXCEPTIONS

conversion_error = 1

invalid_table_width = 2

invalid_type = 3

no_batch = 4

unknown_error = 5

gui_refuse_filetransfer = 6

OTHERS = 7.

IF sy-subrc <> 0.

MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.

ENDIF.

SORT i_pr BY sno.

LOOP AT i_pr.

MOVE-CORRESPONDING i_pr TO it_item.

APPEND it_item.

CLEAR it_item.

AT END OF sno.

READ TABLE i_pr INDEX sy-tabix.

MOVE-CORRESPONDING i_pr TO it_header.

APPEND it_header.

CLEAR it_header.

ENDAT.

ENDLOOP.

SORT it_header BY sno.

SORT it_item BY sno.

v_rows = sy-srows - 6.

Upload the Data from Internal Table

LOOP AT it_header.

Header Data

PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.

PERFORM bdc_field USING 'BDC_CURSOR'

'EBAN-BEDNR'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'EBAN-BSART'

it_header-bsart.

PERFORM bdc_field USING 'RM06B-EPSTP'

it_header-epstp.

PERFORM bdc_field USING 'EBAN-KNTTP'

it_header-knttp.

PERFORM bdc_field USING 'RM06B-EEIND'

it_header-eeind.

PERFORM bdc_field USING 'RM06B-LPEIN'
it_header-lpein.

PERFORM bdc_field USING 'EBAN-WERKS'

it_header-werks.

PERFORM bdc_field USING 'EBAN-LGORT'

it_header-lgort.

PERFORM bdc_field USING 'EBAN-EKGRP'

it_header-ekgrp.

PERFORM bdc_field USING 'EBAN-MATKL'

it_header-matkl.

PERFORM bdc_field USING 'EBAN-BEDNR'

it_header-bednr.

PERFORM bdc_field USING 'EBAN-AFNAM'

it_header-afnam.

Item Details

v_l = 0.

To add no. of rows

v_2 = 0 .

As the screen is showing 13 rows defaulted to 130

v_rowno = 130 .

LOOP AT it_item WHERE sno = it_header-sno.

v_l = v_l + 1.

IF v_l = 14 .

IF v_2 = 12 .

v_2 = 12 .

v_l = 2 .

From second time onwards it is displaying 12 rows only

v_rowno = v_rowno + 120 .

PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.

PERFORM bdc_field USING 'BDC_CURSOR'

'RM06B-BNFPO'.

PERFORM bdc_field USING 'RM06B-BNFPO'

v_rowno.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

ELSE.

V_2 initialized to 12 for second screen purpose

v_2 = 12 .

v_l = 2 .

PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.

PERFORM bdc_field USING 'BDC_CURSOR'

'RM06B-BNFPO'.

PERFORM bdc_field USING 'RM06B-BNFPO'

v_rowno .

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

ENDIF.

PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

CLEAR v_field.

CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.

PERFORM bdc_field USING v_field it_item-matnr.

CLEAR v_field.

CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.

PERFORM bdc_field USING v_field it_item-menge.

PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.

PERFORM bdc_field USING 'BDC_CURSOR'

'EBAN-PREIS'.

PERFORM bdc_field USING 'BDC_OKCODE'

'/00'.

PERFORM bdc_field USING 'EBAN-PREIS'

it_item-preis.

PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.

PERFORM bdc_field USING 'BDC_CURSOR'

'EBKN-SAKTO'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTE'.

PERFORM bdc_field USING 'EBKN-SAKTO'

it_item-sakto.

Cost Center

PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.

PERFORM bdc_field USING 'BDC_CURSOR'

'COBL-KOSTL'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTE'.

PERFORM bdc_field USING 'COBL-KOSTL'

it_item-kostl.

PERFORM bdc_field USING 'BDC_OKCODE'

'=ENTE'.

ENDLOOP.

PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.

PERFORM bdc_field USING 'BDC_CURSOR'

'RM06B-BNFPO'.

PERFORM bdc_field USING 'BDC_OKCODE'

'=BU'.

Call The Transaction

PERFORM bdc_transaction USING 'ME51'.

ENDLOOP.

Close the BDC Session

PERFORM close_group.

Re: BDC TABLE CONTROL

Former Member — Fri, 25 Jan 2008 05:02:12 GMT

Hope it will help you.

Reward if help.

syntax:

CONTROLS .

if you only want to determine the row of the table control. SY´-SUBRC allows you to check if the cursor is placed in a row of a table control.

u need to comment the performs of table control fields and write ur own perform statements. And u have to declare the table control fields as separate internal tables.

Go through this urls.

www.saptechnical.com

www.sap-img.com

Check the below links.

just refer to the link below

http://www.sapmaterial.com/tablecontrol_sap.html

step by step procedure with screen shots

http://www.planetsap.com/howdo_a.htm

http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/content.htm

http://sap.niraj.tripod.com/id25.html

Also you can see the below examples...

Go to se38 and give demodynpro and press F4.