topic bdc table control? in Application Development and Automation Discussions

bdc table control?

Former Member — Mon, 01 Oct 2007 20:04:23 GMT

i need some information hw to create and hw we will use and in which situation we wil create bdc with table control?

Re: bdc table control?

Former Member — Mon, 01 Oct 2007 20:29:00 GMT

Anupama,

Data can be uploaded into the table control using counters.

u can declare a local variable, and increase the counter and each iteration of loop, which pops the data into the increased rows of the table control.,

Using Table Control in BDC

Table control through bdc

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm

http://arthur_ong.tripod.com/xab023.htm

http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm

https://www.sdn.sap.com/irj/sdn/advancedsearch?querystring=bdc%20table%20control&searchpluginname=sd

*********************************************

*BDC Example: Using Table Control in BDC

*******************************************

REPORT Y730_BDC5 .

*HANDLING TABLE CONTROL IN BDC

DATA : BEGIN OF IT_DUMMY OCCURS 0,

DUMMY(100) TYPE C,

END OF IT_DUMMY.

DATA : BEGIN OF IT_XK01 OCCURS 0,

LIFNR(10) TYPE C,

BUKRS(4) TYPE C,

EKORG(4) TYPE C,

KTOKK(4) TYPE C,

NAME1(30) TYPE C,

SORTL(10) TYPE C,

LAND1(3) TYPE C,

SPRAS(2) TYPE C,

AKONT(6) TYPE C,

FDGRV(2) TYPE C,

WAERS(3) TYPE C,

END OF IT_XK01,

BEGIN OF IT_BANK OCCURS 0,

BANKS(3) TYPE C,

BANKL(10) TYPE C,

BANKN(10) TYPE C,

KOINH(30) TYPE C,

LIFNR(10) TYPE C,

END OF IT_BANK.

DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,

IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.

CALL FUNCTION 'WS_UPLOAD'

EXPORTING

FILENAME = 'C:VENDOR.TXT'

FILETYPE = 'ASC'

TABLES

DATA_TAB = IT_DUMMY.

LOOP AT IT_DUMMY.

IF IT_DUMMY-DUMMY+0(2) = '11'.

IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).

IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).

IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).

IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).

IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).

IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).

IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).

IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).

IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).

IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).

IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).

APPEND IT_XK01.

ELSE.

IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).

IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).

IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).

IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).

IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).

APPEND IT_BANK.

ENDIF.

ENDLOOP.

LOOP AT IT_XK01.

REFRESH IT_BDCDATA.

perform bdc_dynpro using 'SAPMF02K' '0100'.

perform bdc_field using 'BDC_CURSOR'

'RF02K-REF_LIFNR'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'RF02K-LIFNR'

IT_XK01-LIFNR.

perform bdc_field using 'RF02K-BUKRS'

IT_XK01-BUKRS.

perform bdc_field using 'RF02K-EKORG'

IT_XK01-EKORG.

perform bdc_field using 'RF02K-KTOKK'

IT_XK01-KTOKK.

perform bdc_dynpro using 'SAPMF02K' '0110'.

perform bdc_field using 'BDC_CURSOR'

'LFA1-TELX1'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFA1-NAME1'

IT_XK01-NAME1.

perform bdc_field using 'LFA1-SORTL'

IT_XK01-SORTL.

perform bdc_field using 'LFA1-LAND1'

IT_XK01-LAND1.

perform bdc_field using 'LFA1-SPRAS'

IT_XK01-SPRAS.

perform bdc_dynpro using 'SAPMF02K' '0120'.

perform bdc_field using 'BDC_CURSOR'

'LFA1-KUNNR'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0130'.

perform bdc_field using 'BDC_CURSOR'

'LFBK-KOINH(02)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

DATA : FNAM(20) TYPE C,

IDX TYPE C.

MOVE 1 TO IDX.

LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.

CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKS.

CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKL.

CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-BANKN.

CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.

perform bdc_field using FNAM

IT_BANK-KOINH.

IDX = IDX + 1.

ENDLOOP.

perform bdc_dynpro using 'SAPMF02K' '0130'.

perform bdc_field using 'BDC_CURSOR'

'LFBK-BANKS(01)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_dynpro using 'SAPMF02K' '0210'.

perform bdc_field using 'BDC_CURSOR'

'LFB1-FDGRV'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFB1-AKONT'

IT_XK01-AKONT.

perform bdc_field using 'LFB1-FDGRV'

IT_XK01-FDGRV.

perform bdc_dynpro using 'SAPMF02K' '0215'.

perform bdc_field using 'BDC_CURSOR'

'LFB1-ZTERM'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0220'.

perform bdc_field using 'BDC_CURSOR'

'LFB5-MAHNA'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_dynpro using 'SAPMF02K' '0310'.

perform bdc_field using 'BDC_CURSOR'

'LFM1-WAERS'.

perform bdc_field using 'BDC_OKCODE'

'/00'.

perform bdc_field using 'LFM1-WAERS'

IT_XK01-WAERS.

perform bdc_dynpro using 'SAPMF02K' '0320'.

perform bdc_field using 'BDC_CURSOR'

'WYT3-PARVW(01)'.

perform bdc_field using 'BDC_OKCODE'

'=ENTR'.

perform bdc_dynpro using 'SAPLSPO1' '0300'.

perform bdc_field using 'BDC_OKCODE'

'=YES'.

CALL TRANSACTION 'XK01' USING IT_BDCDATA

MODE 'A'

UPDATE 'S'

MESSAGES INTO IT_BDCMSGCOLL.

ENDLOOP.

FORM BDC_DYNPRO USING PROG SCR.

CLEAR IT_BDCDATA.

IT_BDCDATA-PROGRAM = PROG.

IT_BDCDATA-DYNPRO = SCR.

IT_BDCDATA-DYNBEGIN = 'X'.

APPEND IT_BDCDATA.

ENDFORM.

FORM BDC_FIELD USING FNAM FVAL.

CLEAR IT_BDCDATA.

IT_BDCDATA-FNAM = FNAM.

IT_BDCDATA-FVAL = FVAL.

APPEND IT_BDCDATA.

ENDFORM.

Re: bdc table control?

Former Member — Mon, 01 Oct 2007 20:38:37 GMT

Hi, thanks for ur replay. and can u help me out in which scenario we wil develope table control in bdc?and i need material regarding that?can u help me out regarding that?

Re: bdc table control?

Former Member — Tue, 02 Oct 2007 08:20:49 GMT

Hi Anupama,

Upload muliple lineitems generally in transactions used tablecontrol. and also check this link

http://allaboutsap.blogspot.com/2007/09/program-to-create-material-master-data.html

*****************

Table Control is used in Module Pool Programming.

Table Control is used to display data of any internal table of ur program or the data from dictionary table directly ino a table format. Using table control with the help of screen painter, data can be easily displayed.It can be created manually through coding or using Table Control Wizard given in the sreen painter.

Table Controls are labeled screen elements to display and process table-type data on dynpros. In a table control, a maximum of 255 screen elements is summarized in a table control row, which can be repeated multiple times within the table control on the screen. The fields of a row have to be created only once as dynpro fields in the dynpro and as global data objects in the ABAP program. Table controls provide an area on the screen for editing the displayed table control rows which offers column headers, marking of rows and columns, horizontal and vertical scrolling with scroll bars, the definition of lead columns and saving of the current settings (see DEMO_DYNPRO). Parts of the user actions in table controls are processed on the presentation server. Vertical scrolling, saving of settings, and changes of screen size (if the resizing properties have been set accordingly when defining the table controls) trigger the event PAI.

A column of the table controls can be defined as marking column , in which the screen element is displayed like a pushbutton and treated like a checkbox (see the first column of the table control in DEMO_DYNPRO). A checked selection key sets the content of the assigned dynpro-field to "X", an unchecked key sets the content to " ". The state of the selection key is transported at the event PAI to a data object of the same name in the ABAP-program and at PBO, you can set the marker via the content of the data object.

Table Controls encapsulate step loops and make their independent use obsolete. The processing of table controls in the dynpro flow logic accordingly bases on the step loop technique using the statement LOOP. In contrary to the processing of independent step loops, the loops of the dynpro flow logic are linked with the addition WITH CONTROL with the table controls of the dynpros during the processing of table controls.

In the ABAP-program, table controls must be declared with the statement CONTROLS, whereat a special structure for handling of table controls is created.

**********************************

Check this link

http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm

How to deal with table control / step loop in BDC

Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')

Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.

Demo ABAP code has two purposes:

1. how to determine number of visible lines and how to calculte page number;

(the 'calpage' routine has been modify to meet general purpose usage)

2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.

Now I begin to describe the step to implement my method:

(I use transaction 'ME21', screen 121 for sample,

the method using is Call Transation Using..)

Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.

(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)

Now we have : FixedLine = 9

LoopLine = 2(for table control, LoopLine is always equal to 1)

Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.

Now we have: FirstLine = 0

or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)

Step3: write a subroutine calcalculating number of pages

(here, the name of actual parameter is the same as formal parameter)

global data: FixedLine type i, " number of fixed line on a certain screen

LoopLine type i, " the number of lines occupied by one steploop item

FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1

Dataline type i, " number of items you will use in BDC, using DESCRIBE to get

pageno type i, " you need to scroll screen how many times.

line type i, " number of lines appears on the screen.

index(2) type N, " the screen index for certain item

begin type i, " from parameter of loop

end type i. " to parameter of loop

*in code sample, the DataTable-linindex stands for the table index number of this line

form calpage using FixedLine type i (see step 1)

LoopLine type i (see step 1)

FirstLine type i (see step 2)

DataLine type i ( this is the item number you will enter in transaction)

changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)

changing line type i.(visible lines one the screen)

data: midd type i,

vline type i, "visible lines

if DataLine eq 0.

Message eXXX.

endif.

vline = ( sy-srows - FixedLine ) div LoopLine.

*for table control, you should compare vline with maximum line of

*table control, then take the small one that is min(vline, maximum)

*here only illustrate step loop

if FirstLine eq 0.

pageno = DataLine div vline.

if pageno eq 0.

pageno = pageno + 1.

endif.

elseif FirstLine eq 1.

pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.

midd = ( DataLine - 1 ) mod ( vline - 1).

if midd = 0 and DataLine gt 1.

pageno = pageno - 1.

endif.

line = vline.

endform.

Step4 write a subroutine to calculate the line index for each item.

form calindex using Line type i (visible lines on the screen)

FirstLine type i(see step 2)

LineIndex type i(item index)

changing Index type n. (index on the screen)

if FirstLine = 0.

index = LineIndex mod Line.

if index = '00'.

index = Line.

endif.

elseif FirstLine = 1.

index = LineIndex mod ( Line - 1 ).

if ( index between 1 and 0 ) and LineIndex gt 1.

index = index + Line - 1.

endif.

if Line = 2.

index = index + Line - 1.

endif.

endform.

Step5 write a subroutine to calculate the loop range.

form calrange using Line type i ( visible lines on the screen)

DataLine type i

FirstLine type i

loopindex like sy-index

changing begin type i

end type i.

If FirstLine = 0.

if loopindex = 1.

begin = 1.

if DataLine <= Line.

end = DataLine.

else.

end = Line.

endif.

elseif loopindex gt 1.

begin = Line * ( loopindex - 1 ) + 1.

end = Line * loopindex.

if end gt DataLine.

end = DataLine.

endif.

elseif FirstLine = 1.

if loopindex = 1.

begin = 1.

if DataLine <= Line.

end = DataLine.

else.

end = Line.

endif.

elseif loop index gt 1.

begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.

end = ( Line - 1 ) * ( loopindex - 1 ) + Line.

if end gt DataLine.

end = DataLine.

endif.

endform.

Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control

form creat_bdc.

field-symbols: <material>, <quan>, <indicator>.

data: name1(14) value 'EKPO-EMATN(XX)',

name2(14) value 'EKPO-MENGE(XX)',

name3(15) value 'RM06E-SELKZ(XX)'.

assign: name1 to <material>,

name2 to <quan>,

name3 to <indicator>.

do pageno times.

if sy-index gt 1

*insert scroll page ok_code"

endif.

perform calrange using Line DataLine FirstLine sy-index

changing begin end.

loop at DataTable from begin to end.

perform calindex using Line FirstLine DataTable-LineIndex changing Index.

name1+11(2) = Index.

name2+11(2) = Index.

name3+12(2) = Index.

perform bdcfield using <material> DataTable-matnr.

perform bdcfield using <quan> DataTable-menge.

perform bdcfield using <indicator> DataTable-indicator.

endloop.

enddo.

************************

see the below thread, it will have the sample code also for MM01 BDC

*************************

To upload the data in a table , in some scenarios, we do not know how many records/data/rows are there in the table initially, with the help of table control we can populate the data in the table.

For ur kind information , u ask abot the code regarding Material--->

y cant u search in the forum , there are many threads available with code in this forum.

for better search ---> search in the Data Transfer(by giving ur question in the search tab).

All The Best.

Reward points if helpful.

Thanks

Message was edited by:

Pattan Naveen