topic Re: ALE tutorials in Application Development and Automation Discussions

http://www.sapgenie.com/ale/configuration.htm

http://www.sapdevelopment.co.uk/training

And also u can get lots of inof from the below link.

http://www.sapgenie.com/ale/why_ale.htm

ALE IDOC

Sending System(Outbound ALE Process)

Tcode SALE - for

a) Define Logical System

b) Assign Client to Logical System

Tcode SM59-RFC Destination

Tcode BD64 - Create Model View

Tcode BD82 - Generate partner Profiles & Create Ports

Tcode BD64 - Distribute the Model view

Message Type MATMAS

Tcode BD10 - Send Material Data

Tcode WE05 - Idoc List for watching any Errors

Receiving System(Inbound ALE )

Tcode SALE - for

a) Define Logical System

b) Assign Client to Logical System

Tcode SM59-RFC Destination

Tcode BD64 - Check for Model view whether it has distributed or not

Tcode BD82 -- Generate partner Profiles & Create Ports

Tcode BD11 Getting Material Data

Tcode WE05 - Idoc List for inbound status codes

ALE IDOC Steps

Sending System(Outbound ALE Process)

Tcode SALE ?3 for

a) Define Logical System

b) Assign Client to Logical System

Tcode SM59-RFC Destination

Tcode BD64 - Create Model View

Tcode BD82 - Generate partner Profiles & Create Ports

Tcode BD64 - Distribute the Model view

This is Receiving system Settings

Receiving System(Inbound ALE )

Tcode SALE - for

a) Define Logical System

b) Assign Client to Logical System

Tcode SM59-RFC Destination

Tcode BD64 - Check for Model view whether it has distributed or not

Tcode BD82 -- Generate partner Profiles & Create Ports

Tcode BD11 Getting Material Data

Tcode WE05 - Idoc List for inbound status codes

Message Type MATMAS

Tcode BD10 - Send Material Data

Tcode WE05 - Idoc List for watching any Errors

1)a Goto Tcode SALE

Click on Sending & Receiving Systems-->Select Logical Systems

Here Define Logical Systems---> Click on Execute Button

go for new entries

1) System Name : ERP000

Description : Sending System

2) System Name : ERP800

Description : Receiving System

press Enter & Save

it will ask Request

if you want new request create new Request orpress continue for transfering the objects

B) goto Tcode SALE

Select Assign Client to Logical Systems-->Execute

000--> Double click on this

Give the following Information

Client : ERP 000

City :

Logical System

Currency

Client role

Save this Data

Step 2) For RFC Creation

Goto Tcode SM59-->Select R/3 Connects

Click on Create Button

RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles

give the information for required fields

RFC Destination : ERP800

Connection type: 3

Description

Target Host : ERP000

System No:000

lan : EN

Client : 800

User : Login User Name

Password:

save this & Test it & RemortLogin

Goto Tcode BD64 -- click on Change mode button

click on create moduleview

short text : xxxxxxxxxxxxxx

Technical Neme : MODEL_ALV

save this & Press ok

select your just created modelview Name :'MODEL_ALV'.

goto add message type

Model Name : MODEL_ALV

sender : ERP000

Receiver : ERP800

Message type :MATMAS

save & Press Enter

4) Goto Tcode BD82

Give Model View : MODEL_ALV

Partner system : ERP800

execute this by press F8 Button

it will gives you sending system port No :A000000015(Like)

5) Goto Tcode BD64

seelct the modelview

goto ~~>edit~~>modelview-->distribute

press ok & Press enter

6)goto Tcode : BD10 for Material sending

Material : mat_001

Message Type : MATMAS

Logical System : ERP800

and Execute

7)goto Tcode : BD11 for Material Receiving

Material : mat_001

Message Type : MATMAS

and Execute --> 1 request idoc created for message type Matmas

press enter

Here Master Idoc set for Messge type MATMAS-->press Enter

1 Communication Idoc generated for Message Type

this is your IDOC

Change Pointers

I know how to change the description of a material using ALE Change Pointers.

I will give the following few steps

1) Tcode BD61---> check the change pointers activated check box

save and goback.

2) Tcode BD50---> check the MATMAS check box save and comeback.

3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.

4) Tcode BD52---> give message type : matmas press ok button.

select all what ever you want and delete remaining fields.

save & come back.

5) 5) go to Tcode MM02 select one material and try to change the description and save it

it will effects the target systems material desciption will also changes

6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute

give Message type : MATMAS and Executte

ALE/IDOC Status Codes/Messages

01 Error --> Idoc Added

30 Error --> Idoc ready for dispatch(ALE Service)

then goto SE38 --> Execute the Program RBDMIDOC

29 Error --> ALE Service Layer

then goto SE38 --> Execute the Program RSEOUT00

03 Error --> Data Passed to Port ok

then goto SE38 --> Execute the Program RBDMOIND

12 Error --> Dispatch ok

Inbound Status Codes

50 Error --> It will go for ALE Service Layer

56 Error --> Idoc with Errors added

51 Error --> Application Document not posted

65 Error --> Error in ALE Service Layer

for 51 or 56 Errors do the following steps

goto WE19 ~~> give the IDOC Number and Execute~~>

Press on Inbound function Module

for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error

<b>Reward points for useful Answers</b>

Regards

Anji

Re: ALE tutorials

Former Member — Mon, 13 Aug 2007 12:28:31 GMT

Hi,

ALE

check url

http://www.sapgenie.com/ale/configuration.htm

http://www.sapdevelopment.co.uk/training

And also u can get lots of inof from the below link.

http://www.sapgenie.com/ale/why_ale.htm

IDOC

Data Creation in Idoc

IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an

asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.

While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.

IDoc is a intermediate document to exchange data between two SAP Systems.

*IDocs are structured ASCII files (or a virtual equivalent).

*Electronic Interchange Document

*They are the file format used by SAP R/3 to exchange data with foreign systems.

*Data Is transmitted in ASCII format, i.e. human readable form

*IDocs exchange messages

*IDocs are used like classical interface files

IDOC types are templates for specific message types depending on what is the business document, you want to exchange.

WE30 - you can create a IDOC type.

An IDOC with data, will have to be triggered by the application that is trying to send out the data.

FOr testing you can use WE19.

How to create idoc?

*WE30 - you can create a IDOC type

For more information in details on the same along with the examples can be viewed on:

http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm

http://www.sappoint.com/presentation.html

http://www.allsaplinks.com/idoc_search.html

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://www.erpgenie.com/sapedi/idoc_abap.htm

To Create Idoc we need to follow these steps:

Create Segment ( WE31)

Create Idoc Type ( WE30 )

Create Message Type ( WE81 )

Assign Idoc Type to Message Type ( WE82 )

Creating a Segment

Go to transaction code WE31

Enter the name for your segment type and click on the Create icon

Type the short text

Enter the variable names and data elements

Save it and go back

Go to Edit -> Set Release

Follow steps to create more number of segments

Create IDOC Type

Go to transaction code WE30

Enter the Object Name, select Basic type and click Create icon

Select the create new option and enter a description for your basic IDOC type and press enter

Select the IDOC Name and click Create icon

The system prompts us to enter a segment type and its attributes

Choose the appropriate values and press Enter

The system transfers the name of the segment type to the IDOC editor.

Follow these steps to add more number of segments to Parent or as Parent-child relation

Save it and go back

Go to Edit -> Set release

Create Message Type

Go to transaction code WE81

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter

Click New Entries to create new Message Type

Fill details

Save it and go back

Assign Message Type to IDoc Type

Go to transaction code WE82

Change the details from Display mode to Change mode

After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.

Click New Entries to create new Message Type.

Fill details

Save it and go back

Check these out..

Check below link. It will give the step by step procedure for IDOC creation.

http://www.supinfo-projects.com/cn/2005/idocs_en/2/

ALE/ IDOC

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs

go trough these links.

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419

http://www.sapgenie.com/sapedi/idoc_abap.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm

http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm

http://www.sappoint.com/abap.html

http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm

http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419