topic Re: table entries in Application Development and Automation Discussions

table entries

Former Member — Tue, 14 Aug 2007 09:58:46 GMT

Hi,

I created a new table ZTSD_T001W which is copied from T001W table.

I created a new table maintenance .When I go to SM30 and enter the table name and click on maintain button it is giving an information message as 'Entry missing in TSADRV,new address maintenance cannot be called'.What does this mean?How can I remove this message?

Regards,

Hema

Re: table entries

Former Member — Tue, 14 Aug 2007 10:15:10 GMT

Hi,

Check whether you table is active or not.

Re: table entries

former_member378318 — Tue, 14 Aug 2007 10:16:22 GMT

Hiya,

When you get the error message popup press F1 to see the extended help. This should show you exactly what to do, something alongs the lines of:

Maintain the table TSADRV with the transaction SM30.

create an entry for Dictionary table ZTSD_T001W, Dictionary field ADRNR.

enter the address group:

A consistent address group in the customer namespace should be used for addresses of customizing objects not delivered by SAP: use the address group 'ZA01'.

As this address group is in the customer namespace of table TSAD7, the entry 'ZA01' must also be made in table TSAD7 in the customer system:

Key: ZA01

Description: Customizing: Customer object addresses

Direct maint.: not marked

Also create the address group 'ZADE' in the table TSAD7 for addresses of deleted customer objects (if the address of the address group 'ZA01' is still referred to elsewhere when you try to delete a customer object, the address is not deleted, the address group is changed to 'ZADE'):

Key: ZADE

Description: Customizing: Adresses of deleted customer objects

Direct maint: not marked

Hope it helps you.

Re: table entries

Former Member — Tue, 14 Aug 2007 10:19:05 GMT

Hi,

Check this link..

http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm

regards,

Omkar.

Re: table entries

suredarreddy_pulimamidi — Tue, 14 Aug 2007 10:25:08 GMT

change the technical settings. u r problem will solved.

Any help on this would be helpful and rewarded .

Re: table entries

Former Member — Tue, 14 Aug 2007 10:28:19 GMT

Hi,

Should I make an entry in TSADRV table?If so,there no Z fields in this table.If I enter table name as ZTSD_T001W, would this effect the entries in the table TSADRV?

Regards,

Hema

Re: table entries

Former Member — Tue, 14 Aug 2007 10:30:36 GMT

Hi Hema

after creating the table you also need to generate table maintanace genaratoe

UTILITIES -> TABLE MAINTANCE GENARATOR

1)enter Authorization Group = &NC& (for all the users means no ristriction)

2) Function Group = ur table name

3)maitance type one or two step

4)click on find screen you will get on pop up processing screen numbers

5) clik on ok default screen numbers will be genarated

6)next click on creat button

7)and save

after that you go to sm30 t-code and enter table name and click on then u don't get any error

reward if usefull

Re: table entries

former_member378318 — Tue, 14 Aug 2007 10:35:06 GMT

Like I said read the extended help (press F1) when you get the error popup. It advises you to do exactly that. I believe this is related to central address management, maybe you should read up on this before making a copy of T001W.

Re: table entries

Former Member — Tue, 14 Aug 2007 10:37:27 GMT

Hi,

Could u pls tell me what should be changed in technical settings?

Regards,

Hema

Re: table entries

Former Member — Tue, 14 Aug 2007 10:47:14 GMT

Nothing has to be done it is very simple just do one thing

just delete ur current function module above all make a new request that is important for error like this all ur entries may b getting stored in some of the wrong requests .

start a fresh u will b able to do it .

thnks

Sahil

Re: table entries

Former Member — Tue, 14 Aug 2007 10:53:15 GMT

Hema,

Once you have copied table from existing one ,all the attributes of the tables are copied excluding the Table Maintainance Generator.So If you have created a new one,then try to delete the previous entries and create a new one.

You can do it in Tr SE11 -> Utilities -> Table maintainace Generator

This Should solve your Problem.

Let me know if I am Wrong.

Award me Points if the question is answered.

Re: table entries

Former Member — Tue, 14 Aug 2007 11:09:38 GMT

Hi,

I have done the same.But it is not working.Could u pls suggest me a proper solution for this?

Regards,

Hema

Re: table entries

Former Member — Tue, 14 Aug 2007 12:20:31 GMT

Hi,

First change the delivery class G To A.

Thanks

Hari.

Re: table entries

Former Member — Tue, 14 Aug 2007 12:49:11 GMT

Hema,

This happens because the extended table maintenance (sm30) uses the (new) Business Address Services for maintaining customizing object addresses from Release 4.0A. The associated entry in the Business Address Services control table TSADRV does not exist.

The solution is,

1. Maintain the table TSADRV with the transaction SM30.

2. Create an entry for Dictionary table ZTSD_T001W, Dictionary field ADRNR.

enter the address group:

3. A consistent address group in the customer namespace should be used for addresses of customizing objects not delivered by SAP: use the address group 'ZA01'.

4. As this address group is in the customer namespace of table TSAD7, the entry 'ZA01' must also be made in table TSAD7 in the customer system:

Key: ZA01

Description: Customizing: Customer object addresses

Direct maint.: not marked

5. Also create the address group 'ZADE' in the table TSAD7 for addresses of deleted customer objects (if the address of the address group 'ZA01' is still referred to elsewhere when you try to delete a customer object, the address is not deleted, the address group is changed to 'ZADE'):

Key: ZADE

Description: Customizing: Adresses of deleted customer objects

Direct maint: not marked

It worked,I did it in my system and it worked.

Try it.

Thanks in advance,

Sanu

Reward points if question is answered

Re: table entries

Former Member — Tue, 14 Aug 2007 13:10:45 GMT

Hi,

There are no Z entries in table TSADRV.So can i create an entry with table name ZTSD_T001W?Will it create any problem?

Regards,

Hema

Re: table entries

Former Member — Thu, 16 Aug 2007 05:41:38 GMT

Hema,

If you will create Z entry in the TSADRV table,it should not create any problem.Its a SAP provided solution.But do exactly as it is there in my post.

You won't face any problem.

Thanks,

Sanu

Reward points if question is answered.

Re: table entries

former_member378318 — Thu, 16 Aug 2007 07:58:23 GMT

Sanujit Acharya,

Please stop begging for points, not only is it embarassing but I gave the same answer much earlier on in the post.

Surbjeet

Re: table entries

Former Member — Sat, 18 Aug 2007 08:50:13 GMT

Surbjeet,

I donot know what your problem is.But I sure can tell you that if i would have seen your answer then I wouldnot have replied with same post.I just gone through hema's problem and tried to solve that.Anyways its a SAP provided solution.Its not yours or mine.But I still can't figure out ,why are you so upset,If someone have replied with the same answer.

About the reward points,I am not begging for it.If you care to search through different posts,many other guys have used the same line.As I am new to this forum,I just set it to get appended to each post I make.If that bothers you

I am sorry to tell you this,I give a damn about what you feel..

Sanujit

Re: table entries

former_member378318 — Mon, 20 Aug 2007 13:16:45 GMT

> I just set it to get appended to each post I make.

> Sanujit

If its appended as you claim then why is it as follows in one post:

> Award me Points if the question is answered.

and then as follows in another post:

> Reward points if question is answered

I don't know why you are getting so upset I merely pointed out that yours was a duplicate answer. Mine was only the second reply so its not like you had to read pages of posts to figure that out.

Re: table entries

Former Member — Mon, 20 Aug 2007 15:58:40 GMT

My dear Friend,

I was not getting upset.It was just a exact reply to your insulting post as you replied 'stop begging for points' and 'its a embarassment'.This style of remarks should not be made in a forum like this.Now you know exactly how i felt after reading your post.

If you care to go through my first post ,the first post was a completely different solution than the latter one.Then I got the SAP help solution as you did and replied to Hema.But I had not seen you post.

But did Hema mark this thread as 'Answered' after your post.NO,She didnot.She was searching for the answer,thats why I tried to reply her with the SAP provided solution.

For your kind information I removed the post comment 'Reward points if question is answered'.

So it should not bother you anymore.

You are senior member registerd in '04.BUt i am new to this Forum.I expect something much more sophisticated remarks not a reply that would provoke me to write the post that i had written before.

If that had hurt your feeling.I apologize.But if you have understood what i have written above you should have aplogized to me before.

Sanujit