topic Re: Help in BAPI_GOODSMVT_CREATE in Application Development and Automation Discussions

Help in BAPI_GOODSMVT_CREATE

Former Member — Wed, 25 Jul 2007 09:44:13 GMT

Hi frnds,

I m facing problem while calling bapi BAPI_GOODSMVT_CREATE in my badi , i m passing all the required parameter, and after that perform commit operation,

but it is giving error message as follows,

The function module MB_CREATE_GOODS_MOVEMENT is called up for the

second time. After it was called up the first time, the function

module MB_POST_GOODS_MOVEMENT was called, but a COMMIT WORK was not

carried out in the calling program.

As running the two function modules again would result in the

database being incorrectly updated, processing is terminated.

System Response Procedure Please ensure that a COMMIT WORK is set

after you call up the function module MB_POST_GOODS_MOVEMENT.

Thanks and Regards,

Mahesh.

Re: Help in BAPI_GOODSMVT_CREATE

Former Member — Wed, 25 Jul 2007 09:48:56 GMT

Hi,

iF you are working for IS-OIL Reqirement there is no BAPI will work as per OSS note 607156.

Please go thru

17.02.2007 Page 1 of 4

SAP Note Number 607156

Goods movements in IS OIL: MB_CREATE_GOODS_MOVEMENT

Note Language: English Version: 3 Validity: Valid from 23.01.2006

Summary

Symptom

*******

WARNING: This is an IS-OIL / IS-MINE-specific note. If you DON'T *
have IS-OIL / IS-MINE installed on your system, this note does *
not apply to you. If this note is applied and you do not have *
IS-OIL / IS-MINE installed, you could cause serious damage to *
your system. *

*******

This note provides information on how function module

MB_CREATE_GOODS_MOVEMENT is used in IS-Oil systems in conjunction with

IS-Oil materials (that is, those materials that carry a UoM group in the

oil-specific view in the material master data, MARA-CMETH = 1 or 2).

A ) In general, in the case of goods movements for IS-Oil materials, the

additional quantities for these materials must be posted in parallel for

every goods movement. The additional stock levels must also be updated

using these quantity values.

There are two possible ways to do this:

a) The additional quantities and parameters are passed to

function module MB_CREATE_GOODS_MOVEMENT through the following IS-Oil

specific table parameters:

T_MS1INT STRUCTURE MSEGO1 OPTIONAL

T_MS2INT STRUCTURE MSEGO2 OPTIONAL

b) The additional quantities are CALCULATED and posted through function

module

MB_CREATE_GOODS_MOVEMENT and processed using the default parameters

that are determined for each line item that contains an IS-Oil material.

In general, SAP does NOT support the second way (b) for calling function

module MB_CREATE_GOODS_MOVEMENT. In the past there have been some

exceptions to this to ensure seamless integration of important

business processes used in the oil & gas industry.

With 4.6C Service Pack 2, these exceptions are delivered as entries

in an SAP table:

Table TOIBCALC_INTRN is delivered with 8 entries that enable

posting of IS-Oil material movements through function module

MB_CREATE_GOODS_MOVEMENT, without passing the additional quantities

(and parameters) through the interface of MB_CREATE_GOODS_MOVEMENT.

The entries delivered with table TOIBCALC_INTRN are:

PROG1 EVENT1 PROG2 EVENT2

RM06ELLB POST_GOODS_ISSUE RM06ELLB ATUSER-COMMAND

SAPLCOCI COCI_CONFIRM_MATERIAL_CONS

SAPLCOCI COCI_CONFIRM_MATERIAL_PROD

SAPLCOFW CO_FW_GOODS_MOVEMENTS_BY_AFFW

17.02.2007 Page 2 of 4

SAP Note Number 607156

Goods movements in IS OIL: MB_CREATE_GOODS_MOVEMENT

SAPLCORF CO_RU_GOODS_MOVEMENT

SAPLWPUE POS_SALES_DOCUMENT_PROCESS

SAPLWPUE POS_SALES_TURNOVER_PROCESS

SAPMQEVA BUCHE_BESTAENDE

NOCALC BLTIME_SET

D X

X X

D X

The call stack of a calling program is analyzed (PROG1, EVENT1, PROG2,

EVENT2) and if it is found in the table as a valid entry, the

additional quantities are calculated, either in the background

(NOCALC = X) or whereby the classic dialog box appears on the screen

(NOCALC = D). The posting time is either left unchanged

(BLTIME_SET = INITIAL) or determined based on the logic that can be

found in include OI_LMBWLFOI_HPM (BLTIME_SET = X).

B) SAP core BAPI using function module MB_CREATE_GOODS_MOVEMENT:

SAP has - so far - not enhanced all core BAPIs to enable the processing

of additional industry solution specific (IS-OIL) data fields.

(see SAP Note 365386 for important details).

However, due to the fact that some core BAPIs use function module

MB_CREATE_GOODS_MOVEMENT from different calling applilcations, the

customer may observe that with one BAPI, postings for IS-Oil materials

are possible, yet with another BAPI, the postings are rejected.

Example:

You can execute the BAPI BAPI_PRODORDCONF_CREATE_HDR using an IS-Oil

material but not BAPI BAPI_GOODSMVT_CREATE.

Since BAPI BAPI_PRODORDCONF_CREATE_HDR calls function module

CO_RU_GOODS_MOVEMENT, which is contained in table TOIBCALC_INTRN,

the posting is based on the default data and additional quantities

are calculated. In this case, you have to set the conversion mode to

'Background', otherwise a 'Dynpro not found' error causes a short dump

(because the entry MOCALC is set to 'D' for dialog).

As a result of this, the system has been designed to run as it does. In

general, customers are advised to proceed as outlined in SAP Note 365386.

On a case by case basis, customers can use table TOIBCALC_INTRN

and either remove, change, or add entries to achieve consistent

system behavior.

17.02.2007 Page 3 of 4

SAP Note Number 607156

Goods movements in IS OIL: MB_CREATE_GOODS_MOVEMENT

With note 736980, the announcement of a new BAPI GoodsMovementOil is made, and

new BAPI methods are delivered which enable goods movement postings for IS-OIL

materials.

More Terms

o General keywords: add-on, IS-Oil, industry solution,...

o Problem-specific key words: BAPI, HPM, QCI, additional quantities

Cause and Prerequisites

Solution

Although it is possible to post goods movements for IS-Oil materials (as

above), SAP does not currently support any core

BAPIs for posting goods movements with IS-Oil materials.

Calculating additional quantities in the background is not seen as a

a general solution.

On a case by case basis, customers can use table TOIBCALC_INTRN

and either remove, change, or add entries to achieve consistent

system behavior.

Header Data

Release Status: Released for Customer

Released on: 23.01.2006 13:26:07

Priority: Recommendations/additional info

Category: Consulting

Main Component IS-OIL-DS-HPM Hydrocarbon Product Management

Valid Releases

Software Component Release From

Release

To Release and

Subsequent

IS-OIL 46C 46C 46C

IS-OIL 472 472 472

Related Notes

17.02.2007 Page 4 of 4

SAP Note Number 607156

Goods movements in IS OIL: MB_CREATE_GOODS_MOVEMENT

Number Short Text

870106 IS-OIL TDP LI21 postings from WM to MM

736980 Enhancement of BAPI GoodsMovement for IS OIL

546569 FAQ : HPM - Hydrocarbon Product Management

Reward points

Regards

Re: Help in BAPI_GOODSMVT_CREATE

Former Member — Wed, 25 Jul 2007 10:01:01 GMT

Hi Kiran,

Thanks for reply but i m not getting u, i ll clear u my requirement ,

First i ll clear u my requirement, in MIGO transaction when user clik on save button, I want to call T-code MB1B for scrap entry for this, I m using BAdI MB_DOCUMENT_BADI and method MB_DOCUMENT_BEFORE_UPDATE, and calling the bapi BAPI_GOODSMVT_CREATE.

mahesh.

Re: Help in BAPI_GOODSMVT_CREATE

Former Member — Wed, 25 Jul 2007 10:05:02 GMT

Hi mahesh,

Which area your working is this IS-OIL/SD?Consult your BA(Bussiness Analyst) and ask what mateial you are using..

IS-Oil stands for Industruail Solution for Oil and Gas Industry, IS-Oil is the core business solution for Oil and Gas industry provided by SAP.

IS-Oil component enables you to map all business processes required in the petroleum trade. The component comprises the purchase, storage, transportation, and sale of fuels, lubricants, and bottled gas.

The component contains the following functional areas:

● Telephone sales

● Scheduling

● Data collation

● Interfaces

● Liquefied petroleum gas

● Internal stock monitoring

Regards

Re: Help in BAPI_GOODSMVT_CREATE

Former Member — Wed, 25 Jul 2007 11:07:51 GMT

Hi Kiran,

The situation is not like that, when i m calling same bapi from zreport its working fine , but when i m calling in badi it gives said dump.

please reply.

Re: Help in BAPI_GOODSMVT_CREATE

Former Member — Thu, 26 Jul 2007 03:32:41 GMT

Hi Frnds,

I m waiting ........................

please reply.

Regards,

mahesh.

Re: Help in BAPI_GOODSMVT_CREATE

Former Member — Thu, 26 Jul 2007 06:33:54 GMT

Hi Mahesh,

You can't directly call BAPI FM 'BAPI_GOODSMVT_CREATE' inside the BADI 'MB_DOCUMENT_BADI'. Because this function module will again trigger the BADI when it is saving, so it will go in a Loop. And it will cause update termination.

To avoid this in BADI you write a code for creating a job and inside that perform a BAPI FM call. so it will be separated from main transaction.

Create a report with BAPI FM call and schedule a job for that report in BADI by passing the necessary details. so it won't go in a loop.

Thanks

Rajkumar Abbu.